MBP as good as dead after upgrade to 5.8?
Hi All,
A strange problem with my MBP after trying to upgrade to 5.8. It never restarted after a seemingly normal installation script. Only things happening are the sleeping led comming on, a short sounding noise from the fan, the cd-drive clicking and the sleeping led going off.
I tried every bit of troubleshooting I could find which gave me one little spark of hope: after holding down the power button for a second or ten the sleeping light shows a read-out: a two second burst of on-off's followed by a short pause followed by going on for one second.
Is there anyone out there who got a clue what the diagnosis of this might be?
I'm certain it will end up in my local Apple Store but knowing the guys over there it would be better if I try to be at least one step ahead...
Thanks in advance!!
grts, Michel
Update:
As feared, gone to a Apple Center, back to phone with Apple Care, forth to Apple Center again, Apple being slightly apathic to my complaints how a 1.5 year old computer bearing a logo that is supposed to show a high degree of quality and on to a Service Center where they suspect a failing logic board... all parties agree this is not what to expect from a machine with this price tag, noon action what so ever.
For now the MBP is on the test bench - i hope it's the graphic card.
I did get a replacement macbook for the time being. It's not all bad, just extreme improvising.
@ neuroanatomist: Dang!!! 9 years short of ANBO
grts,
Michel
Similar Messages
-
What can I do to restore good wifi reception after upgrading Snow Leopard
My situation is similar to what is described by others, but different enough that I thought starting a new thread might help. I upgraded from Leopard to Snow Leopard (10.6.3) in January. All was good. As new upgrades came out I conscientiously updated my software. Then about 4-6 weeks ago I noticed that I could not get wireless in some areas of my house, further from my router, where I used to able to get fine reception, and where other computers in the house still worked fine. The other computers are a MacBook Pro (running 10.6.8 but now just updated to Lion) and an iBook G4 (10.4.11). I also noticed that when I streamed video it was choppy, even if I used an ethernet cable.
I decided to reinstall from the CD (10.6.3) and that worked; all internet was back to normal. Then I updated to 10.6.8. Problem came back immediately. Reinstalled 10.6.3 and all was normal. Upgraded to 10.6.4 still normal. Updated to 10.6.5 problem back. Went back to 10.6.3 and back to normal.
I have tried repairing permissions and some of the other suggestions I have found here, but nothing works. The only way to get decent wifi reception throughout my house is to go back to the CD and reinstall. I see lots of people saying that after upgrading to later versions of Snow Leopard they lose wireless, but no one says they just lose wireless at greater distances from the router. I am using a Westell 327W ADSL modem router (802.11g) and I am connecting to the internet on Verizon DSL.
I would like to upgrade to Lion but I heard that this does not help with the Wifi issues others have reported, so would like to get this sorted out before upgrading.
Please help.The solution given by Tenortim fixed my problem. Thank you Tenortim
https://discussions.apple.com/message/12924009#12924009
It is a little difficult. You have to be able to use Terminal to do step 3. Fortunately, my son was able to explain some of the details. The rest is straightforward.
I wish Apple would not include the new firmware without making sure it worked. I suppose if I upgrade to Lion, which I would like to do, I will have to go through the process again. For now I will stick with 10.6.8 and the Airport driver from 10.6.4, since that is working great. -
E71 just went dead after upgrading
Well, I´ve stopped crying ´cause it did´nt help...
I plugged in my phone to the computer via USB and clicked on upgrade. It started and I left for a coffee. Came back and my phone was dead and the computer said it was a old version of OVI (changed it yesterday, so it wasn't that old) and that I ought to upgrade it and try again.
Yeah, well, I can´t start it now, it makes a buzz and then nothing more and it goes totally black again.
YES, I´ve tryed to press 3 * answerbutton and the on/off button simultaniously without any luck. Sometimes it starts (with the screen turning greyish) but then nothing more and it shuts down totally again.
HELP!
I don´t know what I´m supposed to do tomorrow and for the next few weeks....Hi, I suggest you remove the battery and the memory card. Insert just the battery after one minute and try to boot it. If it boots try with the memory card again. If it fails you will probably have to format the card.
If it does not turn on, try another hard reset without having the memory card installed. As you may know the phone memory will be wiped doing it, but there doesn't seem to be any other choices.
One thing though, your phone didn't run out of battery during the update? If you're not sure, try charging it for at least 15 mins - if it will charge of course.
If nothing works and you cannot get it back to life you will unfortunately have to visit a Nokia care point to get it fixed.
As you've already tried getting it back to life but not succeded I guess this thread by psychomania: /t5/Pool-of-Knowledge/Recovering-from-a-failed-firmware-update/td-p/398147 isn't too much help, but if you get it back to life it gives some really good advices to what to do trying to update it again. It also provides you with the links to find your nearest Nokia care point.
It's worth reading. And make sure you do the hard reset correct as you will have to depress the key combination, hold those buttons in, push the power button, keep holding those three first keys in and keep holding the down until you're past the Nokia Handshake logo screen.
Good luck! -
When i upgraded my IOS. I always find it hard to continue my search in internet. I need to turn off the wifi connection then on it after wards even though using the laptops and other mobile phone with wifi have a very good signal. Just like this message, i need to off it then turn it on again.
Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod. -
Hi!
I did right now do an software upgrade on my 6110, everything looked okay, no errors or pequliar messages, but now the phone won't start up. When I push the "on"-button, the usual "bzm" sounds and the screen lights up, but then nothing happens, and after about 15 seconds the screen goes black again and the phone don't react when I push the "on"-button. Is there any way to fix this other sending it to the serviceshop?you can take the phone to service centre and let them flash it as a dead phone ie forcefully writing the software after that it should work and also when it works check out the maps.lock of the maps should be open.
tongue is too confused on what to speak -
MBP 2011 wont turn on after upgrading RAM
Hey every buddy
Today I decided to upgrade my 2011 MBP and change its ram with 1 brand new ADATA with the sane bus! now I have a problem, after I changed them my Machine wont turn on! even its battery lights are not working!
Please tell me fellas what is going on! Its deadand i need to Buy another Computer? :~/
besst RegardsI don't know what a "sane bus" is but I'd suggest replacing the new RAM with the old RAM and seeing if the MBP works again. If it does, the problem is with the new RAM. Apple RAM requirements are more demanding than for PC's so it's essential to buy RAM from reliable vendors who specialize in Macs. It takes more than just fitting the DIMM socket for RAM to work in a Mac.
-
MBP - beyond freezing - just dead after 3 months
Just wanted to let everyone know that my 2010 MBP died after 3 months.
Was programming Friday nght as usual and then Saturday afternoon the power button did nothing and the mag connector led was very dim.
The Apple store states that it is the logic board and will be 3 days to replace.
Is this the norm? Is it just the new model? The i7?
I made the switch entirely from PC to Mac and now have programming data that I need for client meetings in Mac format and cannot access. Very frustrating.
I have had Dell and HP laptops that ran without issue until retirement
and then are still running as hand me downs (about 5 years old).
I like the OS X interface and enjoy programming on the platform but as a consultant I need something reliable.
Has anyone else had a similar experience?
May be related to the graphics switching. I use the gfxStatus program and usually keep the nvidia on at all times. Recently got a Dell 3008wfp and decided to re-enbale automatic switching and the system died about a week later with NO indication of any problems - good shutdown and then would never power up again...I think that what you have discovered is the reason why there is such a thing as a warranty. Hardware fails
-
MBP Early '11 nearly unusuable after upgrade to OS X Yosemite
I am having problems with my mac getting even close to the boot times it had before upgrading to OS X Yosemite. It also is having problems with disconnecting from the wifi and always has problems loading up programs, folders, and etc.
Below is the EtreCheck report:
Problem description:
Macbook Pro is loading very slow
EtreCheck version: 2.0.11 (98)
Report generated November 13, 2014 at 9:01:38 PM CST
Hardware Information: ℹ️
MacBook Pro (13-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 7 days 4:48:31
Disk Information: ℹ️
Hitachi HTS545032B9A302 disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / [Startup]: 318.84 GB (274.83 GB free)
Core Storage: disk0s2 319.21 GB Online
OPTIARC DVD RW AD-5970H
USB Information: ℹ️
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Problem System Launch Agents: ℹ️
[failed] com.apple.rcd.plist
[running] com.paragon.NTFS.notify.plist Support
Problem System Launch Daemons: ℹ️
[failed] com.apple.AssetCacheLocatorService.plist
[failed] com.apple.ctkd.plist
[failed] com.apple.icloud.findmydeviced.plist
[failed] com.apple.periodic-weekly.plist
[failed] com.apple.wdhelper.plist
[failed] com.apple.xpc.smd.plist
Launch Agents: ℹ️
[loaded] com.examsoft.softest.plist Support
[loaded] com.paragon.updater.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[running] com.examsoft.softest.service.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.paragon.ntfs11.refresh.plist Support
[loaded] jp.co.canon.MasterInstaller.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.google.keystone.agent.plist Support
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox ApplicationHidden (/Applications/Dropbox.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.6 - SDK 10.6 Support
Silverlight: Version: 5.1.30514.0 - SDK 10.6 Support
MeetingJoinPlugin: Version: (null) - SDK 10.6 Support
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
Safari Extensions: ℹ️
Adblock Plus
Reddit Enhancement Suite
3rd Party Preference Panes: ℹ️
Flash Player Support
Paragon NTFS for Mac ® OS X Support
Xmarks for Safari Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
18% systemstats
10% firefox
10% Activity Monitor
7% WindowServer
4% CVMCompiler
Top Processes by Memory: ℹ️
425 MB firefox
189 MB Mail
142 MB plugin-container
82 MB Microsoft Word
73 MB com.apple.WebKit.WebContent
Virtual Memory Information: ℹ️
21 MB Free RAM
1.02 GB Active RAM
1.02 GB Inactive RAM
1.17 GB Wired RAM
42.16 GB Page-ins
1.18 GB Page-outsYou haven't enough memory for all the junk you are trying to run concurrently. I suggest you clean up the act. The following applies to Mavericks and Yosemite.
A. Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
the Security button and set the Zero Data option to one-pass. Click on
the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.
B. Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer. -
Nokia E65 pretends to be dead after upgrade to fir...
I upgraded my Nokia E65 and the upgrade failed while Nokia was in "test mode" after about ten minutes of upgrade process. But the phone restarted and worked well in new firmware. I decided to give one more chance to be sure and the upgrade failed again, this time phone was in "Nokia local mode". And yet the phone works perfectly and the firmware is version 3.
What's wrong if any?Hi,
please describe your problem shorter and clearly.
i dont understand can you upgrade your phone successfully or no?
NOKIA means:Night Of King In Alone -
hi,
i upgrated my E2500 with the last version of firmware but now is dead. the power led is turn on, but the ping are discontinued. the other problem is that after 10/15 sec, the router will restart automatically. i try with tftp but after the reset of router does not change anything.
there's a solution or i must trash my router?
thanksgokuinsido wrote:
hi,
i upgrated my E2500 with the last version of firmware but now is dead. the power led is turn on, but the ping are discontinued. the other problem is that after 10/15 sec, the router will restart automatically. i try with tftp but after the reset of router does not change anything.
there's a solution or i must trash my router?
thanks
Hi,
Update should fix router issues or more features can be added . But how did you update the router ? Did you use a laptop that's connected wirelessly to the network ? or a wired computer ?
I believe that I can make it -
Macbook Pro (2008) dead after upgrade to 10.7.3
After download of the update it restarted.... well tha machine tried to restart. All went black.
Apple technician says he can't get the "validation error code" from the machine in regards to "free" logic board repair (http://support.apple.com/kb/TS2377). I am somewhat disapointed on the fact that the machine dont start even though it is "on" and Apple cant get the "code" beacasue it is not working properly? Catch 22. No I am not eligable and I have to buy a new Mac due to the 10.7.3 NON working upgrade. Im actually very frustrated.
I cant believe that it is a coincidence that my hardware stopped working just at the same time I was upgrading the OS. I think that is a whitewash for not doing the repair.
What can I do to get this issue solved without buying a new mashine for lots of hard earned money?This is extremely unlikely. However, it is possible for a bug in software to damage your computer.
I suspect two possibilities.
1) Somehow 10.7.3 has altered your firmware preventing the computer from starting.
2) The hardware has failed coincidentally with upgrading. ( More likely in my view.)
Our office has switched back to Snow Leopard for security reasons. But I do know others running 10.7.3 without difficulties.
Apple cant get the "code" beacasue it is not working properly? Catch 22.
If your computer simply had the graphics chip problem the “code” would be readable. The reason they are unable to get this code is because your Mac has a deeper (and more serious) problem. -
SRW224G4 - cant manage with new firmware thru Xmodem (dead after upgrade)
Hi All,
Before i wrote this msg, i saw few threads aboud "problem with upgrade firmware". Today i've upgraded my Linksys SRW224G4 to newest 1.2.2b and... after rebot, switch was still rebooting. I found on cisco site how to solve the problem regarding this: http://www.cisco.com/en/US/products/ps9967/products_qanda_item09186a0080a36371.shtml
So, i've made RS232 (because i don't have orginal one ; pinout 1-1 2-2 3-3 4-4 5-5) and connected to console
The problem is with hiting ESC on POST screen. My hyperterminal freezes So, i can't upload my files
Files: SRW224G4_fesm-12216.ros ; ls_106-12216.ros ; SRW224G4-1.0.0.61
------ Performing the Power-On Self Test (POST) ------
UART Channel Loopback Test........................PASS
Testing the System SDRAM..........................PASS
Boot1 Checksum Test...............................PASS
Boot2 Checksum Test...............................PASS
Flash Image Validation Test.......................PASS
BOOT Software Version 1.0.0.06 Built 23-May-2005 16:58:25
Linksys SmartSwitch based on 88E6218 with ARM946E-S.
32MByte SDRAM. I-Cache 8 KB. D-Cache 8 KB. Cache Enabled.
Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.
Preparing to decompress...
100%
FAIL !!! Check image for valid file.
Please download a new image.
Downloading code using XMODEM.
Download failed
Perform WARM BOOT ...
------ Performing the Power-On Self Test (POST) ------
UART Channel Loopback Test........................PASS
Testing the System SDRAM..........................PASS
Boot1 Checksum Test...............................PASS
Boot2 Checksum Test...............................PASS
Flash Image Validation Test.......................PASS
BOOT Software Version 1.0.0.06 Built 23-May-2005 16:58:25
Linksys SmartSwitch based on 88E6218 with ARM946E-S.
32MByte SDRAM. I-Cache 8 KB. D-Cache 8 KB. Cache Enabled.
Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.
Preparing to decompress...
100%
FAIL !!! Check image for valid file.
Please download a new image.
Downloading code using XMODEM.
When i try to send SRW224G4_fesm-12216.ros now, HT freezes too
Guys, what shall i do now ?
I think the RS232 cable is ok, pinout is linke normal DB9 one-to-one without crossing 2 with 3 pin.
Best regards, w8ing 4 any help.So...
I've solved it
Problem was with settings in HT and sending ESC chacter
thank U ;D -
IPAD2 IS DEAD AFTER UPGRADED IOS8 - VERY SLOW
ios8 for ipad2 = dead ipad2 (slow and freeze)
thank Apple for you big bug !!!
now, i can't use my ipad2 ... why you block the possibility to downgrade to ios7 for ipad2 when you can't resolve problem ios8 for ipad2 ?
if i must change my ipad ... i change too all my family iphone and ipad ... and now i buy all with android system !!!!Try some basic troubleshooting:
(A) Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
(B) Try reset all settings
Settings>General>Reset>Reset All Settings
(C) Setup as new (data will be lost if you do not have backup)
Settings>General>Reset>Erase all content and settings -
[SLOVED] All my USB not work after upgrade system.
Hello all,
I'm new in Arch, and i install my system with your LiveCD (2005).
In the first boot, all work good. But after upgrade (pacman -Syu), all my USB device (Keyboard, Mouse) not work.
I'm not using (yet) with Xorg, just in command shell (tty1), But i can't press anything cuz my keyboard not work.
I try to do that (https://bbs.archlinux.org/viewtopic.php … 19#p906119), but no work to me too.
What i can to do to fix this?
My dmesg:
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.33-ARCH (thomas@evey) (gcc version 4.5.0 (GCC) ) #1 SMP PREEMPT Thu May 13 11:32:37 CEST 2010
Command line: BOOT_IMAGE=/vmlinuz26 root=/dev/sdb5 ro
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bf564000 (usable)
BIOS-e820: 00000000bf564000 - 00000000bf5bb000 (ACPI NVS)
BIOS-e820: 00000000bf5bb000 - 00000000bf5db000 (reserved)
BIOS-e820: 00000000bf5db000 - 00000000bf5ec000 (ACPI NVS)
BIOS-e820: 00000000bf5ec000 - 00000000bf600000 (reserved)
BIOS-e820: 00000000bf600000 - 00000000bf602000 (usable)
BIOS-e820: 00000000bf602000 - 00000000bf603000 (ACPI data)
BIOS-e820: 00000000bf603000 - 00000000bf60b000 (reserved)
BIOS-e820: 00000000bf60b000 - 00000000bf615000 (ACPI NVS)
BIOS-e820: 00000000bf615000 - 00000000bf63e000 (reserved)
BIOS-e820: 00000000bf63e000 - 00000000bf681000 (ACPI NVS)
BIOS-e820: 00000000bf681000 - 00000000bf800000 (usable)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000023f800000 (usable)
NX (Execute Disable) protection: active
DMI 2.6 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
No AGP bridge found
last_pfn = 0x23f800 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask E00000000 write-back
1 base 200000000 mask FC0000000 write-back
2 base 0C0000000 mask FC0000000 uncachable
3 base 23F800000 mask FFF800000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbf800 max_arch_pfn = 0x400000000
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009ec00 (usable)
modified: 000000000009ec00 - 00000000000a0000 (reserved)
modified: 00000000000e0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 00000000bf564000 (usable)
modified: 00000000bf564000 - 00000000bf5bb000 (ACPI NVS)
modified: 00000000bf5bb000 - 00000000bf5db000 (reserved)
modified: 00000000bf5db000 - 00000000bf5ec000 (ACPI NVS)
modified: 00000000bf5ec000 - 00000000bf600000 (reserved)
modified: 00000000bf600000 - 00000000bf602000 (usable)
modified: 00000000bf602000 - 00000000bf603000 (ACPI data)
modified: 00000000bf603000 - 00000000bf60b000 (reserved)
modified: 00000000bf60b000 - 00000000bf615000 (ACPI NVS)
modified: 00000000bf615000 - 00000000bf63e000 (reserved)
modified: 00000000bf63e000 - 00000000bf681000 (ACPI NVS)
modified: 00000000bf681000 - 00000000bf800000 (usable)
modified: 00000000fed1c000 - 00000000fed20000 (reserved)
modified: 00000000ff000000 - 0000000100000000 (reserved)
modified: 0000000100000000 - 000000023f800000 (usable)
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000fcda0] fcda0
init_memory_mapping: 0000000000000000-00000000bf800000
0000000000 - 00bf800000 page 2M
kernel direct mapping tables up to bf800000 @ 16000-1a000
init_memory_mapping: 0000000100000000-000000023f800000
0100000000 - 023f800000 page 2M
kernel direct mapping tables up to 23f800000 @ 18000-22000
RAMDISK: 37c44000 - 37e19ab8
ACPI: RSDP 00000000000f0420 00024 (v02 ALASKA)
ACPI: XSDT 00000000bf5ae068 0004C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000bf5b7ba0 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000bf5ae140 09A5C (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 00000000bf60cf80 00040
ACPI: APIC 00000000bf5b7c98 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 00000000bf5b7d10 00102 (v01 AMICPU PROC 00000001 MSFT 03000001)
ACPI: MCFG 00000000bf5b7e18 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 00000000bf5b7e58 00038 (v01 ALASKA A M I 01072009 AMI. 00000004)
ACPI: Local APIC address 0xfee00000
(13 early reservations) ==> bootmem [0000000000 - 023f800000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0001000000 - 00016d7b38] TEXT DATA BSS ==> [0001000000 - 00016d7b38]
#2 [0037c44000 - 0037e19ab8] RAMDISK ==> [0037c44000 - 0037e19ab8]
#3 [00016d8000 - 00016d826b] BRK ==> [00016d8000 - 00016d826b]
#4 [00000fcdb0 - 0000100000] BIOS reserved ==> [00000fcdb0 - 0000100000]
#5 [00000fcda0 - 00000fcdb0] MP-table mpf ==> [00000fcda0 - 00000fcdb0]
#6 [000009ec00 - 00000fca90] BIOS reserved ==> [000009ec00 - 00000fca90]
#7 [00000fcd24 - 00000fcda0] BIOS reserved ==> [00000fcd24 - 00000fcda0]
#8 [00000fca90 - 00000fcd24] MP-table mpc ==> [00000fca90 - 00000fcd24]
#9 [0000010000 - 0000012000] TRAMPOLINE ==> [0000010000 - 0000012000]
#10 [0000012000 - 0000016000] ACPI WAKEUP ==> [0000012000 - 0000016000]
#11 [0000016000 - 0000018000] PGTABLE ==> [0000016000 - 0000018000]
#12 [0000018000 - 000001d000] PGTABLE ==> [0000018000 - 000001d000]
[ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880001800000-ffff8800087fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0023f800
Movable zone start PFN for each node
early_node_map[5] active PFN ranges
0: 0x00000010 -> 0x0000009e
0: 0x00000100 -> 0x000bf564
0: 0x000bf600 -> 0x000bf602
0: 0x000bf681 -> 0x000bf800
0: 0x00100000 -> 0x0023f800
On node 0 totalpages: 2092659
DMA zone: 56 pages used for memmap
DMA zone: 110 pages reserved
DMA zone: 3816 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 765725 pages, LIFO batch:31
Normal zone: 17892 pages used for memmap
Normal zone: 1290780 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bf564000 - 00000000bf5bb000
PM: Registered nosave memory: 00000000bf5bb000 - 00000000bf5db000
PM: Registered nosave memory: 00000000bf5db000 - 00000000bf5ec000
PM: Registered nosave memory: 00000000bf5ec000 - 00000000bf600000
PM: Registered nosave memory: 00000000bf602000 - 00000000bf603000
PM: Registered nosave memory: 00000000bf603000 - 00000000bf60b000
PM: Registered nosave memory: 00000000bf60b000 - 00000000bf615000
PM: Registered nosave memory: 00000000bf615000 - 00000000bf63e000
PM: Registered nosave memory: 00000000bf63e000 - 00000000bf681000
PM: Registered nosave memory: 00000000bf800000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Allocating PCI resources starting at bf800000 (gap: bf800000:3f51c000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff880008a00000 s89176 r8192 d21416 u524288
pcpu-alloc: s89176 r8192 d21416 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2060321
Kernel command line: BOOT_IMAGE=/vmlinuz26 root=/dev/sdb5 ro
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8167004k/9428992k available (3449k kernel code, 1058356k absent, 202696k reserved, 1818k data, 484k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:768
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 83886080 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3311.105 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6624.13 BogoMIPS (lpj=11037016)
Security Framework initialized
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
CPU 0 MCA banks CMCI:0 CMCI:1 CMCI:3 CMCI:5 CMCI:6 CMCI:7 CMCI:8
using mwait in idle threads.
Performance Events: Nehalem/Corei7 events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
ACPI: Core revision 20091214
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz stepping 07
Booting Node 0, Processors #1
CPU 1 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8
#2
CPU 2 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8
#3 Ok.
CPU 3 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8
Brought up 4 CPUs
Total of 4 processors activated (26499.22 BogoMIPS).
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI Error (psargs-0359): [RAMB] Namespace lookup failure, AE_NOT_FOUND
ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) (20091214/nsinit-340)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
ACPI: BIOS _OSI(Linux) query ignored
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000dffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xffffffff] (ignored)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:16.0: reg 10: [mem 0xfe707000-0xfe70700f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:1a.0: reg 10: [mem 0xfe706000-0xfe7063ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xfe700000-0xfe703fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: PME# disabled
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PME# disabled
pci 0000:00:1d.0: reg 10: [mem 0xfe705000-0xfe7053ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10: [io 0xf0d0-0xf0d7]
pci 0000:00:1f.2: reg 14: [io 0xf0c0-0xf0c3]
pci 0000:00:1f.2: reg 18: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 1c: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 20: [io 0xf090-0xf09f]
pci 0000:00:1f.2: reg 24: [io 0xf080-0xf08f]
pci 0000:00:1f.3: reg 10: [mem 0xfe704000-0xfe7040ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
pci 0000:00:1f.5: reg 10: [io 0xf070-0xf077]
pci 0000:00:1f.5: reg 14: [io 0xf060-0xf063]
pci 0000:00:1f.5: reg 18: [io 0xf050-0xf057]
pci 0000:00:1f.5: reg 1c: [io 0xf040-0xf043]
pci 0000:00:1f.5: reg 20: [io 0xf030-0xf03f]
pci 0000:00:1f.5: reg 24: [io 0xf020-0xf02f]
pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xfe620000-0xfe63ffff 64bit]
pci 0000:01:00.0: reg 20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 30: [mem 0xfe600000-0xfe61ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: reg 10: [mem 0xfe640000-0xfe643fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:03:00.0: reg 10: [io 0xd040-0xd047]
pci 0000:03:00.0: reg 14: [io 0xd030-0xd033]
pci 0000:03:00.0: reg 18: [io 0xd020-0xd027]
pci 0000:03:00.0: reg 1c: [io 0xd010-0xd013]
pci 0000:03:00.0: reg 20: [io 0xd000-0xd00f]
pci 0000:03:00.0: reg 30: [mem 0xfe500000-0xfe50ffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D1 D2 D3hot
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:05:00.0: reg 10: [io 0xc000-0xc0ff]
pci 0000:05:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
pci 0000:05:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:00:1c.6: PCI bridge to [bus 05-05]
pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.6: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:00:1c.7: PCI bridge to [bus 06-07] (subtractive decode)
pci 0000:06:00.0: PCI bridge to [bus 07-07] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR19._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved
system 00:01: [mem 0xe0000000-0xe3ffffff] has been reserved
system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
system 00:02: [io 0x0290-0x029f] has been reserved
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:0b: [io 0x0400-0x0453] has been reserved
system 00:0b: [io 0x0458-0x047f] has been reserved
system 00:0b: [io 0x0500-0x057f] has been reserved
system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0b: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:0b: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
system 00:0c: [io 0x0454-0x0457] has been reserved
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io disabled]
pci 0000:00:1c.0: bridge window [mem disabled]
pci 0000:00:1c.0: bridge window [mem pref disabled]
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:00:1c.4: bridge window [mem pref disabled]
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:00:1c.5: bridge window [io disabled]
pci 0000:00:1c.5: bridge window [mem disabled]
pci 0000:00:1c.5: bridge window [mem pref disabled]
pci 0000:00:1c.6: PCI bridge to [bus 05-05]
pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.6: bridge window [mem disabled]
pci 0000:00:1c.6: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:06:00.0: PCI bridge to [bus 07-07]
pci 0000:06:00.0: bridge window [io disabled]
pci 0000:06:00.0: bridge window [mem disabled]
pci 0000:06:00.0: bridge window [mem pref disabled]
pci 0000:00:1c.7: PCI bridge to [bus 06-07]
pci 0000:00:1c.7: bridge window [io disabled]
pci 0000:00:1c.7: bridge window [mem disabled]
pci 0000:00:1c.7: bridge window [mem pref disabled]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.6: setting latency timer to 64
pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.7: setting latency timer to 64
pci 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:06:00.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe6fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfe500000-0xfe5fffff]
pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
pci_bus 0000:06: resource 3 [io 0x0000-0xffff]
pci_bus 0000:06: resource 4 [mem 0x00000000-0xffffffffffffffff]
pci_bus 0000:07: resource 6 [io 0x0000-0xffff]
pci_bus 0000:07: resource 7 [mem 0x00000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 1878k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff88000979e000 - ffff88000d79e000
software IO TLB at phys 0x979e000 - 0xd79e000
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1304838033.699:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15956
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
pcieport 0000:00:1c.5: irq 27 for MSI/MSI-X
pcieport 0000:00:1c.6: setting latency timer to 64
pcieport 0000:00:1c.6: irq 28 for MSI/MSI-X
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
PM: Resume from disk failed.
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 484k freed
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xf0d0 ctl 0xf0c0 bmdma 0xf090 irq 20
ata2: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf098 irq 20
ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xf070 ctl 0xf060 bmdma 0xf030 irq 20
ata4: SATA max UDMA/133 cmd 0xf050 ctl 0xf040 bmdma 0xf038 irq 20
pata_acpi 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_acpi 0000:03:00.0: setting latency timer to 64
pata_acpi 0000:03:00.0: PCI INT A disabled
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.01: ATA-6: WDC WD1200JD-00GBB0, 02.05D02, max UDMA/100
ata1.01: 234441648 sectors, multi 16: LBA48
ata1.01: applying bridge limits
ata1.00: configured for UDMA/133
ata1.01: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 1AJ1 PQ: 0 ANSI: 5
scsi 0:0:1:0: Direct-Access ATA WDC WD1200JD-00G 02.0 PQ: 0 ANSI: 5
ata2.01: failed to resume link (SControl 0)
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 0)
ata2.01: link offline, clearing class 3 to NONE
ata2.00: ATAPI: TSSTcorp CDDVDW SH-S223C, SB05, max MWDMA2
ata2.00: configured for MWDMA2
ata2.00: qc timeout (cmd 0xa0)
ata2.00: TEST_UNIT_READY failed (err_mask=0x4)
ata2.01: failed to resume link (SControl 0)
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 0)
ata2.01: link offline, clearing class 3 to NONE
ata2.00: configured for MWDMA2
ata2.00: qc timeout (cmd 0xa0)
ata2.00: TEST_UNIT_READY failed (err_mask=0x4)
ata2.00: limiting SATA link speed to 1.5 Gbps
ata2.00: limiting speed to MWDMA2:PIO3
ata2.01: failed to resume link (SControl 0)
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata2.01: SATA link down (SStatus 0 SControl 0)
ata2.01: link offline, clearing class 3 to NONE
ata2.00: configured for MWDMA2
ata2.00: qc timeout (cmd 0xa0)
ata2.00: TEST_UNIT_READY failed (err_mask=0x4)
ata2.00: disabled
ata2.00: hard resetting link
ata2.01: hard resetting link
ata2.01: failed to resume link (SControl 0)
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata2.01: SATA link down (SStatus 0 SControl 0)
ata2.01: link offline, clearing class 3 to NONE
ata2: EH complete
pata_via 0000:03:00.0: version 0.3.4
pata_via 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_via 0000:03:00.0: setting latency timer to 64
scsi4 : pata_via
scsi5 : pata_via
ata5: PATA max UDMA/133 cmd 0xd040 ctl 0xd030 bmdma 0xd000 irq 16
ata6: PATA max UDMA/133 cmd 0xd020 ctl 0xd010 bmdma 0xd008 irq 16
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:1:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb2 sdb3 sdb4 < sdb5 >
sda: sda1 sda2
sd 0:0:1:0: [sdb] Attached SCSI disk
sda3
sd 0:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sdb5): mounted filesystem with ordered data mode
<30>udev[901]: starting version 167
Adding 7030776k swap on /dev/sdb2. Priority:-1 extents:1 across:7030776k
Thanks a lots.
Last edited by KingYes (2011-05-08 11:03:55)FYI, the latest installation CD version is "2010.05". It's best to use the latest. Get it from http://www.archlinux.org/download/
I'm not sure but I believe all other LiveCDs are custom made outside of the official Archlinux development team.
I recommend downloading the CD I mentioned and follow this guide: https://wiki.archlinux.org/index.php/Beginners%27_Guide
I've installed arch many times on different hardware and the only time I lost mouse and keyboard was after I removed "10-evdev.conf" and "10-quirks.conf" from /etc/X11/xorg.conf.d/. I copied both back from backups, rebooted and m&k were functional again. My guess is "10-evdev.conf" was the file I needed. Check both these files exist. -
I can not open my iphone 4 after upgrading to 6.1.3 :( can someone help me please
My iphone went dead after upgrading to 6.1.3 it is completeley useless i tried hard reset but it didnt work , i tried via itunes to restore or dfu mode but still it isnt workin . can someone help me pleasse
What messages or error codes do you get ?
Maybe you are looking for
-
Can I put more than one user under one Apple ID account. I want to let other family members use imessage on their own Apple device. Or is there another way to get this end result?
-
Win 7 Touchpad driver is not working on Satellite C855-21V
Hello everybody! I have an Satellite C855-21V and it came with Windows 8. After one week of desaster Im sure I want never again a Windows 8 on my Computer! So I installed Windows 7 and can find all the drivers somewhere in the internet. The only thin
-
BADI for post processing of IDOC BOMORD
Hi experts , I want a BADI for post processing of IDOC BOMORD. Actually after IDOC processing BOM got updated in system and i want to schedule the explosion of BOM in process order after it. Please update me with the solution. Thanks Nitin kapoor
-
Reendering questions in Pr.Elements 8
Hi I have had terrible "performance issues" during playback of my edited scenes in Premiere Elements 8..then, thanks a lot, I realized that after adding each scene, I jsut hit enter to have Premiere reender the clips as I add them....after that the p
-
Since installing FF 5.0, I can't leave blog comments on Fox News
since installing FF 5.0, I can't leave blog comments on Fox News. The blog section looks like it is trying to load, but doesn't.