MBP battery will not charge when playing games.

I have a late 2011 15-inch MacBook Pro and have had upgraded 16GB RAM for two years.
An avid Sims 3 player, I have 6 expansion packs and play regularly. I have never had a problem with playing on my MBP.
I had to get a new charger in December and got an Apple certified 60W MagSafe charger for $40 (has serial number, designed in CA, assembled in China, Apple logo, everything). I purchased another one for my Sims-playing roommate as well.
Ever since I've had a new charger my MBP immediately stops charging when I load up the game, and from there the battery life depletes despite staying green. I know that The Sims 3 draws a lot of power, but I have never had a problem with charging while playing. My roommate has an older MBP, even more expansion packs for Sims 3, and yet the same charger that I got for her works fine while playing.
Is it my charger, battery, hardware, or what that is not allowing me to play?
Thanks!

Some of the heavy gamers do feel the Windows machines are better suited since they can go to the high-end video/graphics support. But, as you say, that is a big extra expense. If you are not into that kind of high-end gaming the Mac is fine, the 2011 MBP is a great machine. I've been using this one since it came out and it is rock solid.
But I don't put a heavy load on it in the gaming area. I run FORTRAN scientific codes which are heavy loads on the CPU, but not the GPU so there is not that added electrical demand.
An external graphics card does not seem like a real need to me, especially since you would probably then be looking at another monitor, also. If you are not having any system issues beyond the 60 w charger being undersized, why mess around more than you have to?
Just my two cents

Similar Messages

Droid X battery will not charge when phone is in vehicle mount

Droid X battery will not charge when phone is in vehicle mount. If you plug phone directly in to car charger it charges fine. This makes using the GPS virtually useless as it runs down the battery very fast. Anyone else have this problem. Other wise I love the phone.

Many of the Verizon Droid X car mounts have defective wires in them. This problem is widely reported on many forums and websites. You should return your product for a brand new replacement that is not defective (that is, the car charger will charge your Droid X when it is in the car mount).
I happen to love the Verizon Droid X car mount. Lot of ways to adjust it from different angles for different placements. Just get a Verizon Droid X car mount replacement that does not have defective wires in it, and it should work just fine!

Macbook pro 15'' 2011 will not charge while playing games under win7 64

During the game (under high load ex. crysis2), the charging LED changes from orange to green and the computer does not charge,
even the battery drains slowly. If battery charge is 100%, in about 50 minutes after the start of the game, the battery charge drops to 94% and
when I quit the game the charging LED changes from green to orange... What's the deal? (Sorry for my english, i'm italian ).

I've just bought a 17" MBP and I'm having the same issue, but in OSX and Linux just the same. In one incident, my battery was running low so I plugged it in, but it still died about 10 minutes later because it continued to draw more power than the Magsafe plug could provide. Needless to say, there was quite a bit of filesystem corruption from the sudden power loss. That this is a common issue to 2011 MBPs does not magically make it "acceptable", especially when the fix consists of providing a more powerful charger.
For a $2500 laptop this is absolutely ridiculous. If the thing draws 100w under peak usage, make a damned charger that provides 120w. In the worst case, it will keep the computer running without unduly stressing the battery. In the best case, it will charge the battery much faster.

My battery will not charge when plugged in to power supply. What's up??

I recently purchased a new MacBook Pro from my college, and have barely had it two months. One morning I started it up and it would not hold a charge. It will not remain on unless it is plugged into the power supply. If I unplug it while it's on it immediately shuts down.
Sometimes if it's plugged into the power supply for a while it will shut itself down un-announced.
I'm very frustrated, mostly because I just bought it and had Snow Leopard installed and everything. The message on my battery status simply says (Not Charging), though the icon says it's fully charged, and the light on the power supply is green. I'm very confused.
Any idea what's going on and how I can fix it? Is the battery simply not connecting, or is it shot already?

As the original post stated, "One morning I started it up and it would not hold a charge. It will not remain on unless it is plugged into the power supply. If I unplug it while it's on it immediately shuts down."
This is exactly what's happened to mine this morning. Last night everything is fine, remember seeing about 5 hrs remaining on the battery, plug it up but this morning will not remain on unless its plugged in. If I unplug it, it immediately shuts down.
My first thought was somehow I didn't plug it up or there was something wrong with the plug itself and the battery was drained but then I realized its working with the power cord so that's not the problem, only when on the battery.
How can a battery just crap out overnight???

Any ideas on how to fix ipad after the new iOS 7 update? My battery will not charge, my ipad is hot to the touch, the iTunes Store won't open, and my messages on Facebook aren't showing up when I chat and pintrest won't pin to my boards.

Any ideas on how to fix ipad after the new iOS 7 update? My battery will not charge, my ipad is hot to the touch, the iTunes Store won't open, and my messages on Facebook aren't showing up when I chat and pintrest won't pin to my boards.

If you have all your music on the cmputer then i would connect up my phone uncheck the Sync Music option and apply.
This should take all the music off your phone .Then you can resync the music back on to it.
If this doesn't work maybe a restore to factory settings and start from scratch is the way to go

My original Ipod 30gb will not charge when plugged in (suspect battery completely dead...). Help

My orignal 30gb ipod will not charge when plugged in to a power socket. I think the battery has completely run down. Any thoughts?

Which model is this iPod. The "original" iPod was 5GB or 10GB, so this must be a 3rd gen iPod, at the earliest. This document shows all the iPod models.
http://support.apple.com/kb/ht1353
If it's a 3rd gen iPod, it has a dock connector, but it needs to be connected to a FireWire port to charge. It does not charge from a USB port.

My brand new PB will not charge when in standby or when on

I played with a number of PB's so far and finally have my own but... My brand new PB will not charge when in standby or when on; as soon as I plug the charger into the USB port it detects it and brings the screen up (if in standby) showing the lighting bolt on the battery but it does not charge; the lighting bolt stays but the % charge does not change (or hopefully increase) at all; it will actually decrease (??); the only way I can charge it is when I attach the charger and the PB is powered off… the PB brings the red (or green can't remember) LED on and starts to flash it on off and charges; tried the hard reset with no change; I am running the latest OS release 1.0.8.6067. Has anyone seen this? Is it h/w or f/w? Any Fix?

Here's a final update on this... the units goes back to its maker or the store sometimes tomorrow... Why? First I tried to understand if this was s/w or h/w related or maybe both before calling support which in the end I did; so I did try a different charger, hard resetting the unit, discharging and recharging etc; nothing helped or fixed the charging in standby; the unit continued to charge only after being turned off and then plugged into the charger. Here's what I learned:
1. Going through the initial setup and OS update it is quite possible for the unit to NOT load the OS image correctly i.e. it appears that it loaded the OS and displays the OS version as if it loaded properly when in fact it did not and the image loaded is corrupt. I found this out during a live session with support when they were looking at my PC screen while the PB was connected to the PC only to point out that the Desktop Manager was showing a s/w update being available (1.0.8 bundle 6067) while the unit was reporting 1.0.0 bundle 0. Strange, I thought I already had 1.0.8.6067... after accepting the update, which takes a bit to load, I started more testing, charging, discharging, hard reset (i.e. Volume Up + Power) etc with no positive results to report. This also proved that the USB port is working, both data (PC to PB communication alright) and power (PB displays the plug over the battery bar when the power contact work)
2. The charger I have works and it is the correct one: P/N PSM09A-050RIM; make sure it is not one of the incorrectly rated chargers some received.
3. In order to reduce the amount of current the unit consumes when on, you have to run the Video Chat app at least once and acknowledge the (c) page; otherwise this remains as a background app that take more CPU cycles on the battery. After doing this I did notice a slight improvement in the sense that PB did charge some instead of discharging. The problem is that it only charged to about 60% and did not move higher no matter how long I waited (yes I did reset just to make sure it is not the s/w acting up and deciding to not update the power bar)
4. The way the RIM RMA works is like this: they start the process for you to return the unit back for repair which I understand may take 10 days; you may get a unit to use for this time if so desired, it will be charged to your CC; your unit may get repaired if possible; if not possible to repair, your new unit will be replaced with a refurbished unit; once you get some unit back you need to send the “10 day replacement unit” to RIM to get your CC charge cleared. I find that this program is good for when you can not return the unit to the place you purchased it from. Otherwise it is not good as I do not like getting a refurb for something I consider brand new (not to mention that you may get a unit with a few bright or dark pixels)
5. Throughout this process I looked at three (3) Playbooks: 2 had bright pixels and were returned immediately; this last one does not charge correctly. No win for me!
6. The battery lasts approx 4 hours with the unit playing a video clip in a loop and WiFi on with a WEB pulled stop watch running as well (had to allow multi tasking in setup/general).
Finally, my theory about this problem is that it is h/w related and that it is caused by the noise the board or the display is making when the unit is either on or in standby; a component not soldered properly (cold joint) or out of spec may be the culprit; for example a resistor in resistor divider monitoring the battery voltage or a decoupling capacitor missing or not soldered...

My notebook will not charge when plugged in

My notebook will not charge when plugged in & now will not work at all. Do you think I need a new battery?

Battery information is found in SYSTEM PROFILER>HARDWARE>POWER.
Sometimes the power adapter does not show the light but is still functioning. (that often the case with mine) If on the menu bar the icon shows that it is charging, your ok. If not, I jiggle the connector or snap it and that restores the connection. If neither works, make certain the the connectors are clean, both on the adapter and the MBP. Check to see if any of the posts are bent or missing.
If still no success, try another adapter if available. If that does not work, the are issues with the MBP. If it does, a new will be the answer.
Ciao.

Battery will not charge. and other issues

Well i'm working on a friend of mines notebook, its a n100 model 0768 12u running windows xp. This is the situation so far. First his hard drive had fried so i replaced that and put the o.s. back on it,but now the battery will not charge. also the wireless network card and dvd drive did not work. I had originally thought that they might have fried as well when the hard drive went down. However I looked through the forums here and found that alot of people solved the battery issue simply by replacing the battery i recommended that. He purchased a replacement battery ( not a genuine lenovo battery, don't know if that makes a difference) and when i put it in the dvd drive and the network card started working no problem. But alas the battery still would not charge. the system runs fine without a battery in it, but if i put the battery in it while its running it turns itself off after about 30 seconds of having the battery in. when the system is powered off and i put the battery in the battery lcd in front blinks 5 times orange then nothing for about 30 seconds then 5 more times. maybe thats a trouble code, don't know, looked all oover the forums and couldn't find anything quite like it. any help would be greatly appreciated.
thanks
Steve

Duck3,
Glad that worked for you! Thanks for sharing here.
I saw a weird situation on friend's ThinkPad recently - a replacement battery arrived with a 37% charge (not 100% deliberately as somewhere around 40% is the best for shelf life), but it would not accept a charge. We did a reset by removing the battery & AC and pressing and holding the power button a number of times (some people say 10 times, some two or three times for a count of 5 or 10). This drains residual capacitance.
We plugged back in the battery and AC and it began to charge.
Might be worth a try here before he opens it up ....
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

MBA battery does not charge when connected. Help!

My MBA battery does not charge when connected to the charger. Ive checked the other threads and followed advice but nothing seems to help.. My battery health info is good, I've tried cleaning the magnetic pins of the charger, reset smc but it still does not charge. The light on the charger is green or does not come on sometimes, and it's the same for a few Power outlets. What else can I do? Would greatly appreciate any help! Thanks.

It recognizes the charger intermittently. After cleaning, it showed the charger as connected but not charging the battery. I will try my friends charger later to see if it works. Thanks for your help!

My macbook pro will not charge when I am using it.

My macbook pro will not charge when I am using it. My battery will say "charged" then "not charging" and it goes back and fourth. It says "Power Source: Power Adapter". But when I use my pro it will loose the power source then reconnect a second later to it. This problem is getting annoying because I have to stop using my macbook pro to charge it.

Reset SMC.
http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, contact Apple.
Best.

Reinstalled Windows on HP Compaq nc2400 & battery will not charge.

I reinstalled Windows XP on a friends HP Compaq nc2400 now the battery will not charge. When I plug in the AC power cord the device manager thinks it is Broadcom Gigabit Ethernet card. I have reinstalled the battery and AC drivers to no avail. Any idea of what might be the issue. I have also tried a spare battery and power cord to no avail.
Thanks in advance.

You're very welcome.
Do you know if the battery was charging beforehand?
Is it possible the contacts on the battery/notebook got bent somehow?
You can try this...
Reset the Microsoft ACPI-Compliant Control Method Battery which is basically the driver that communicates between the computer and the battery. There is a chance that it is corrupted.
Step 1. Go to Device Manager
Step 2. Select Batteries
Step 3. Right click the "Microsoft ACPI-Compliant Control Method Battery" that is listed there
Step 4. Click Uninstall
Step 5. At the prompt put a check in the box to remove the current driver
Step 6. Shutdown the computer
Step 7: Remove the battery for minute and then put it back in
When the computer comes back up it should automatically find the driver.
Step 8. Go to Device Manager
Step 9. Select Batteries
Step 10. Right click the "Microsoft ACPI-Compliant Control Method Battery" that is listed there
Step 11. Click "Search automatically for updated driver software"
Do the same thing with Microsoft ACPI-Compliant Embedded Controller.

I-phone 4 battery will not charge

Phone just stopped working. Shows low battery but will not charge when plugged in. Using Apple charge cord. help!

Take it in for diagnosis. No one here can fix water damage.
Barry

My new iPad mini will not charge when plugged into adapter. Any suggestions?

my new ipad mini will not charge when plugged into adapter. What should I try?

Does the charger get warm at all? Plug the cable into your computer with iTunes open. Does it say not charging.? If it does, the cable is good. The iPad will charge very slowly when pluged into your computer.
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

My ipad will not charge when i connect it to my computer.

My ipad will not charge when i connect it to my computer. It will sync but it states "Not Charging" next to the battery icon. It will chrage when I plug it into a wall outlet driectly.

The USB port on your computer does not provide enough power oto charge your iPad. This is normal. Charge it by plugging into a wall outlet.

MBP battery will not charge when playing games.

Similar Messages

Maybe you are looking for