MBP Bluetooth connection to Garmin nuvi

Good morning, everyone!
I am trying to figure out if it is possible to pair my MBP (C2D) with my Garmin nuvi 660 gps unit. Rather, I've been able to pair the two devices, but the nuvi expects to be paired to a phone, so it doesn't recognise the MBP or any files I try to send. Basically, I want to be able to send image files and mp3's to the nuvi.
Does anyone have any ideas on this? (I've also posted this question on a couple of gps boards.)
Thanks!
gonzomup

I have the same problem. I think that neither of the companies have the will to solve this issue. I have always been a fan of Nokia, so this is really disappointing.

Similar Messages

Bluetooth connectivity to a nuvi gps

my original iphone pairs with my nuvi gps unit but then the nuvi shuts down
when i unpair the unit works fine... my firmware on the nuvi gps is up todate
any one else have this problem

There is an update from Garmin to v5.0, I had the same reboot issue until I applied the 5.0 update. Since then my 285WT and iPhone get along great.
Hope this helps.

1.1.3 Update Doesn't Work with Garmin Nuvi

I have been using my iPhone with a Garmin nuvi 680. So far it has worked very well as a hands-free speaker, that is untill last night when I upgraded to 1.1.3. Since the upgrade my Bluetooth connection to the nuvi is shot. I get an initial connection, but every minute or two it warns me that my phone has been disconnected. You can imagine that this gets quite old after a dozen or so warnings.
I have unpaired my iPhone and paired it again to no avail. I have reset the iPhone and I will try again. What else should I try?

I restored my iPhone last night and reloaded my latest backup. That didn't fix the problem at all. Next I am going to try restoring and starting from scratch. Maybe that will work better.
What I am thinking I'll do is do a clean restore, no backup just a new 1.1.3 iPhone and then test the Bluetooth with the nuvi. If that works, then I'll load all my info back to the phone manually. If it doesn't I'll restore the backup and wait for a fix.

HT3039 Why doesn't my iphone4s connect to my Garmin nuvi?

I am unable to connect my iPhone 4s to the Garmin nuvi in my car. Does anyone have a similar issue?

Hello:
I do not have similar devices, but I do not think that is possible.
Barry

I have an Iphone 6 plus. Can the bluetooth connect to the cars speaker system and a Garmin HUD unit at the same time?

I have an Iphone 6 plus. Can the bluetooth connect to the cars speaker system and a Garmin HUD unit at the same time?

Hi,
Normally yes, Bluetooth can connect to multiple devices at the same time, so yes.
The only thing is that you'll be able to send sound/music to only one at a time, but I understand the Garmin HUD doesn't play sounds.
cheers

Bluetooth connectivity loss in SL on MBP

I'm losing Bluetooth connectivity with keyboard and mouse when MB Pro goes to sleep. I have to restart to regain the connections. I also have noticed that the option to turn BT on and off from the menu bar status icon has gone away and I am left with a greyed out line of Bluetooth On. Is anyone else seeing this repetitiive and really annoying behavior? Is there a user implementable solution other than reboots?

Hi..,
I also suspect that it´s a class2 - but wanted to check - since I would like to use a Class 1 unit.
I checked with system_profiler from a terminal :
BRCM2046 Hub:
Product ID: 0x4500
Vendor ID: 0x0a5c (Broadcom Corp.)
Version: 1.00
Speed: Up to 12 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0x06100000
Current Available (mA): 500
Current Required (mA): 0
Bluetooth USB Host Controller:
Product ID: 0x8213
Vendor ID: 0x05ac (Apple Inc.)
Version: 1.80
Serial Number: 00236CA80779
Speed: Up to 12 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0x06110000
Current Available (mA): 500
Current Required (mA): 0
That implies a bcm2046 chip - and I checked it a broadcom:
http://www.broadcom.com/products/Bluetooth/Bluetooth-RF-Silicon-and-Software-Sol utions/BCM2046
I also checked with ioreg:
+-o Broadcom2045FamilyUSBBluetoothHCIController <class Broadcom2045FamilyUSBBluetoothHCIController, id 0x1000011c8, registered, matched, active, busy 0 (2 ms)$
| | | | +-o IOBluetoothHCIUserClient <class IOBluetoothHCIUserClient, id 0x100001211, !registered, !matched, active, busy 0, retain 5>
| | | | +-o IOBluetoothHCIUserClient <class IOBluetoothHCIUserClient, id 0x100001236, !registered, !matched, active, busy 0, retain 5>
| | | | +-o IOBluetoothHCIUserClient <class IOBluetoothHCIUserClient, id 0x1000014f9, !registered, !matched, active, busy 0, retain
That implies a bcm2045 chip..
I looked that up at broadcom:
<a class="jive-link-external-small" href="http://">http://www.broadcom.com/products/Bluetooth/Bluetooth-RF-Silicon- and-Software-Solutions/BCM2045
Other sites mentions that this chip can be class1,2 and 3 depending on design.
I don´t know what Apple did, and that´s the answer i+m looking for
Best regards
Tue

Bluetooth with Garmin Nuvi 670

When trying to activate Bluetooth capability on my Nuvi 670, I get the following message.
Please set your Bluetooth phone to 'Find Me/Discoverable' mode.
In searching the help screens for the iPhone, I cannot find how to set my iPhone to this mode. Can anyone help me?

Hey RMUNSON01,
Going to the Settings> General> Bluetooth makes the iPhone discoverable.
Jason

IPhone and Garmin Nuvi GPS

Besides my Motorolla headset, I managed to pair my iPhone to my Garmin Nuvi 360 GPS with no problems. This particular Nuvi model as well as some other Garmin models have Bluetooth built in. The benefits of this device is that besides the wonderful Nuvi GPS features, the device is also a car kit with speaker and microphone. What I found quite remarkable was that during the pairing, the entire phonebook I have on my iPhone came over as well. So, when someone on that list calls, their name comes up on the touch screen. Or if you want to call someone, either click through or search the directory on the Garmin. Very cool.
Powerbook Mac OS X (10.4.4)

iPhone works with my Garmin Nuvi 360 via bluetooth, downloaded address book and all, but after a day or two the connection stops working (iPhone says they’re paired, but Nuvi doesn’t show phone icon) and I have to manually set up the connection again. Anyone else having this problem?
Thanks.

Would a rear view camera work with a garmin nuvi GPS

If I buy a garmin nuvi with Bluetooth would a Bluetooth rear view car camera work with it.

Only a few garmin models allow a back up camera to be connected. Check the link below for what garmins have this option.
https://support.garmin.com/support/searchSupport/case.faces?caseId=%7B22ca4500-2009-11df-d1b4-000000...
The Garmin 760LMT is the only one I could find on BestBuy.com that has this options.
http://www.bestbuy.com/site/Garmin+-+dezl+760LMT+7%26%2334%3B+GPS+with+Built-In+Bluetooth/7352055.p?...
You will also need a cable and a back up camera for it to work.
https://buy.garmin.com/shop/shop.do?pID=70938

Problems pairing with Garmin Nuvi 1310 sat nav

I have been trying to connect to a Garmin Nuvi 1310 sat nav. It set up first time, however when I switch off the sat nav and then turn it back on my phone will not connect automatically. I have to remove it from the list on the Garmin and start all over again. Surely this can't be right, my old iPhone re-connected automatically everytime. Is there a setting I need to adjust?

I bought a Garmin 265WT recently and could pair my iPhone 1st generation to the unit but it would constantly reboot the Garmin unit. After reading all the support forums and upgrading to the latest software releases on both my iPhone and Garmin 265WT
I could not get the problem resolved running the below software/firmware:
iPhone 2.2 and 2.2.1
Garmin 4.8 with Bluetooth Firmware 1.7
I finally called Garmin and they shipped me another unit. The new unit worked without any problems even with older software and firmware. Seems as if the reboot problem might be more than just software and firmware related.
My iphone at this point is running 2.2.1 but the below software and firmware revisions of the new Garmin 265WT worked:
The new unit came with software:
Software Version 4.40
GPS SW Version 2.38b
Bluetooth SW Version 1.65
This worked no problem with bluetooth. No reboots....
I even upgraded to:
Software Version 5.0
Bluetooth SW Version 1.7
The unit still worked no problem. I can only suspect the issue here is hardware related in some cases. So for some people the upgraded software/firmware may work. But if you are running both iPhone 2.2.1 (1st Gen Phone) and the latest software and Bluetooth firmware and still have the problem I would call Garmin and have them replace the unit.

Nokia Lumina 520 and Bluetooth "breaks" my Garmin ...

I received a Lumina 520 as a work phone yesterday.The first thing I did was pair the phone with my car's Garmin Nuvi GPS. Big Mistake. Lumina Bluetooth "broke" the GPS. The bluetooth link stopped the GPS from accepting any key commands. The only way to fix it was to disable bluetooth on the Lumina 520 , then reset my GPS to its defaults, removing the displayed "Windows Phone" from the GPS bluetooth phone list. To confirm it was teh phone, I repeated the process, enabled bluetooth, paired the devices, and the Lumina 520 showed "connected" to the GPS. Immediately the GPS was unable to register any commands on its touch screen. Repeating the process of disabling bluetoth on the phone and doing a factory reset on the Garmin, allowed the Garmin to work again. Looks like Lumina and bluetooth is not a popular subject on this forum.
Decibel

And you tried with which other phone(s)? Even then, it would still not imply the issue is with the 520 as there should be much more issues like this fairly specific one. Also why would you want to link the two? what is the purpose?
Bluetooth is an issue in general, go to any website about phones and you'll see the same type of posts. Problem is that while it is/should be a standard it's really fairly open as far as specifications go..
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

Bluetooth connection fails iOS 8.1

My iPhone5s cannot make a Bluetooth connectivity with any of my Macs(MBA mid-2013, iMac late-2012, MacPro) all running Yosemite 10.10. Prior to upgrading to Yosemite the same iPhone running on iOS 7 did make successful bluetooth connectivity. My iPhone5s is on 8.1. Surprising even though it cannot have connectivity, it sees and stay connected for a second or two and then will say "Not Connected". But the same phone connects with Blueant S4 handsfree Speakerphone - except that I have to make a connection each time. In the past, it used to connect automatically when I was in the range of my device.
Yes, I have tried reset PRAM, SMC resets on my Macs, powered OFF and ON my iPhone5s and even reset my NW connection. In addition, I have other iPhones in my family and none can make connection to Macs which run on Yosemite(tried 4s, 5 and even 6). But the same iPhones make successful BT on Macs running Mavericks and Mountain Lion(yes one MBP still exists). So I am guessing it is changes in Yosemite that is causing the problem. Because I am going through this problem - my family members who have Macs do not want to upgrade to Yosemite as they depend on BT connectivity for their external devices. I don't blame them, but sounds very silly to me that Apple messed up big time with BT connectivity. I see many reporting similar issues, but for many resetting PRAM and/or SMC they have been successful.
Any help would be appreciated. Again I am not referring to Handoff (which it is working for me) but I am interested in BT connectivity with Yosemite. This is important because external BT devices need to be connected(Headphones, Earbuds etc).

I went to the Apple store yesterday because I was having the same issue in my Honda Accord after I updated to iOS 8.1.1. The very helpful rep there suggested that I go to Settings -> General -> Reset on my phone to reset my iPhone 5 General Settings. She said that it's like an oil change for the phone that cleans out a lot of the junk. After doing this, I was able to stream both my music and Pandora in my car again.
Note: When you reset the General Settings, you will lose your phone password and background image (not a big deal). You will NOT lose your pictures, video or emails.
Hope that helps!

How to share internet connection from macbook pro to ipad via bluetooth connection

can anyone guide me how to share my internet from my MBP to Ipad (gen-1) via bluetooth connection....???
i can't share my internet via Wifi...
because my internet always been cracked by someone if i'm sharing throught wifi...
pleaseeeeee....
help me.....

You just need to enter system preferences, open the tab share, and there you can choose the option "share internet". Then you select the way you want to do it and that's all.
PS.:I'm Spanish, excuse me for the lenguage or the ortographic faults

Problems Pairing with Garmin Nuvi 265W

Bought a new Garmin Nuvi 265W GPS. Set the unit up. It paired immediately with iPhone and worked without issue. Then as a last step in the setup I registered the Nuvi with Garmin. Big mistake. During the registration Garmin wrote something to the Nuvi and toasted the iPhone pairing. Unit goes into an on/off do loop. Resetting and restoring doesn't help. Unpaired the iPhone and deleted it from the Nuvi so at least it's back working. Garmin doesn't know why what they write during the registration process causes the problem and said there is no way to go back. I've got V2.2 on my iPhone. Anybody have a similar problem and know of a work around to get the pairing to work again?

I bought a Garmin 265WT recently and could pair my iPhone 1st generation to the unit but it would constantly reboot the Garmin unit. After reading all the support forums and upgrading to the latest software releases on both my iPhone and Garmin 265WT
I could not get the problem resolved running the below software/firmware:
iPhone 2.2 and 2.2.1
Garmin 4.8 with Bluetooth Firmware 1.7
I finally called Garmin and they shipped me another unit. The new unit worked without any problems even with older software and firmware. Seems as if the reboot problem might be more than just software and firmware related.
My iphone at this point is running 2.2.1 but the below software and firmware revisions of the new Garmin 265WT worked:
The new unit came with software:
Software Version 4.40
GPS SW Version 2.38b
Bluetooth SW Version 1.65
This worked no problem with bluetooth. No reboots....
I even upgraded to:
Software Version 5.0
Bluetooth SW Version 1.7
The unit still worked no problem. I can only suspect the issue here is hardware related in some cases. So for some people the upgraded software/firmware may work. But if you are running both iPhone 2.2.1 (1st Gen Phone) and the latest software and Bluetooth firmware and still have the problem I would call Garmin and have them replace the unit.

IOS 8.1.2 car bluetooth connection

I have lost the Bluetooth connectivity in my 2014 Hyundai Santa Fe since I updated my phone to iOS 8.1.2. I have tried to reset car Bluetooth features as well as on my phone. Nothing seems to work. Is anyone else having issues and are there any solutions?
tx

Similar to VroomVroom: I have iphone 5s, was on iOS7, went to iOS 8.1.2, and I didn't notice that I had lost a specific bluetooth connection: Garmin Smartlink - Live Traffic App. The Garmin Smartlink uses bluetooth to connect to the aftermarket Kenwood DNX891HD I have in my car, this comes with a Navigation GPS included. The Garmin Smartlink app (Live Traffic) provides immediate traffic updates if your city is covered, and my city Cincinati OH is covered. This was all working fine before I upgraded the iOS on the iphone 5S. I read another article related to "carkit" connections between iphones and car stereos (for both NAV and also hands-free) - here is the key point and my theory: Only ONE bluetooth connection can be supported at a time. In my case - the hands-free telephone (thru car microphone and car stereo speakers) works fine, and I believe this is also "shared" by Pandora App (from iphone to Kenwood). So, my theory is the iphone will not connect to the Kenwood for the Nav, since it is already connected to the Kenwood for the audio (Pandora and hands-free, I think these two "share" the same bluetooth connection, and I think the Smartlink connection is separate). I messed around this morning in the parking lot at work, and my attempts to "forget" and "pair" the iphone and Kenwood would continously start playing Pandora, but the Smartlink still will not connect (when it dis work, I would see a green circle with two cars on my Nav map screen, indicating the smartlink connection and also status of the traffic). My next test this afternoon will be to delete Pandora app on the phone, try forget / pair again and see if I can get Smartlink to work. If this works, I'll reinstall Pandora App and try to get it back as well. My past 24 hours of skimming articles (don't ya love the internet !) seems to indicate that I am not the only person with bluetooth problems due to the iOS 8.1.2 update....hey Apple...where's 8.1.3 to fix this ?

MBP Bluetooth connection to Garmin nuvi

Similar Messages

Maybe you are looking for