MBP C2D -- display not coming on after sleep, hd is spinning, hard reset re
HI,
After using my new Macbook Pro Core 2 Duo 2.33 for a few days, randomly after opening the lid while Macbook has been sleeping the display will not come on, no illumination whatsoever. The hard drive is spinning.
The only recourse I have found so far is to do a hard shutdown by holding the power button.
any known solutions?
MBP C2D 2.33 Mac OS X (10.4.8)
No, my laptop is treated like a desktop replacement, so it doesn't move. And no peripherals connected.
Hope Apple has corrected the logic board problem by now, though anything is possible as my Macbook is the first production run of the Core 2 Duo.
Will try booting from install disk and repair permissions. Hopefully this is it. (Migration Utility failed miserably when i tried to copy over my user files from my old Powerbook 800. While it said it was doing the copy of my documents etc., it failed to copy any of them across. Migration Assistant even said it was successful.)
Thank you
Similar Messages
-
2008 iMac, display not coming back after sleep, requiring SMC reset and more.
I have a 24" 2008 iMac that's recently started giving me migranes starting a couple weeks ago. It's the kids' shared computer in the bonus room, and one of them comes in and tells me it's not working. I go in, and it seems like it's off, but I can hear the fans going. Won't respond to mouse, keyboard, even hitting the power button that usually pops something up warning that I'm about to shut it down with people still logged in. So I hold the power button down to force it off, wait a minute, and turn it back on. I hear the superdrive sounding like it's trying to load a disc, but there's nothing in there . . . keeps making that noise again and again. No startup chime, no display, nothing, just the superdrive sound. Can't get it to boot. I come to the support site and go through resetting the SMC - unplugging it for 15 seconds. That at least takes care of the superdrive sound, and I get the startup chime, but no video.
I go a step further, unplugging it and plugging it back in while holding the power button down for 10 sec. When I hit the power button after that, it comes on, display nice and bright, but the fans are now running full speed. Another article tells me to reset the SMC for that, which I do, and now the fans are working properly and the system is working again.
Problem is, I wind up having to go through this whole thing every other day. If I follow the steps of unplugging it, holding the power button down while I plug it back in, turning it on and booting up, shutting down and resetting the SMC to make the fans slow down, it will work. But it's random as to when it happens, and I'd really like to know why it could be happening and what I can do to fix it for good and not have to go through the whole thing to get it back up and running. Is it simply on its last legs? Do I need to restore the OS (Snow Leopard upgrade)? Do I need to take it to the Genius Bar and pay them to look at it and diagnose it, and God knows how much to fix?
Or, do I recycle it and just bite the bullet and get a new one? Any thoughts would be greatly appreciated, thanks!
Andythe first thing to try is resetting the pram/nvram
http://support.apple.com/kb/ht1379
if this doesnt work it could be a loose display cable. -
Display not coming on after sleep
Alright so ive looked for awhile and found this is pretty common, except all ive found talks about either imacs or macbook pro. I have an early 2008 model macbook with snow leopard. This has been happening for quite a long time, even before installing snow leopard. If the computer goes to sleep either from time lapsing, or mostly how it happens, from closing it, most of the time i cannot get the display back on until i restart by holding the power button down. Everything ive seen on here so far, nobody has an answer, so does anybody know how to fix this problem yet?
the first thing to try is resetting the pram/nvram
http://support.apple.com/kb/ht1379
if this doesnt work it could be a loose display cable. -
IMac Display not turning on after sleeping for a while
Hey Guys,
Minor issue I've had with my iMac for the last few days, when I wake up I tend to nudge the mouse to turn on the display before taking a shower so that everything is ready for when I get back. However the screen isnt coming on and I'm having to press the power button to sleep the iMac then wake it up again by pressing the power button 5 seconds later, after that, all is good.
Any ideas? This has been since upgrading to 10.6.4
ThanksYeah I might think it's overheating too, but the harddrive always makes this strange noise before the crash happens, so it could be related to the hdd? Or in the worst case, the motherboard.
Any tips on how to check for overheating? I have tried to run temperature monitor software, but the only sensor it detects is the hdd, and it looks fine.
I haven't opened my iMac fully ever, just the user serviceable parts. I installed an Airport card about 1 month before this started happening, could this be related?
Pierre, what did you do when your iMac started overheating? How did you fix it? Mine just full crashes and the screen goes weird. Thanks for your answer. -
L755 Backlight not coming on after sleeping
We got a new L755 laptop and seince we got it, its doing a strange thing. When the computer wakes from sleeping, the backlight doesnt come on, but when the computer powers on from being off, it works perfectly. A little googling hasent turned up anyone else with this problem, so does anyone have an ideas/soloutions?
Thanks in advance!I would make sure your using the latest BIOS; that would be the first place I would check.
========================================================
QOSMIO - x505 q8102X
i7-2630QM , GTX 460m , 18.4" screen @ 1680x945p -
Mac mini display connection will not come back after sleep, I have to shut down and restart the monitor.
Finder icon on dock, macintosh hd, library, launch agent - delete all files & restart sleep to test
also
Finder icon on dock, macintosh hd,
Library/Preferences/SystemConfiguration/com.apple.PowerManagement.plist
delete file & restart sleep to test. -
IMac screen will not come on after sleep
iMac screen does not come on after sleeping for a period of time - twice now from overnight. The back seems to be warm. I have to hold the on button until I hear the drive and system shut down. Then after period of time it will start just fine. ?????
I know that some of the older imacs had overheating problems that caused unexpected sleep. try to keep the display darker and keep the room not too hot. That seems to usually solve the issue.
-
My new (2011) MacBook Pro does not wake up after sleep and this happens about 1 time in 10.
Hello, I have a Mac Book Pro and have the same problem, I close the lid, I have tried every possible thing I have read, and the problem is still here.
Things I have done:
- SMS Reset.
- PR reset,
- Installed Caffeine and solve temporaly the problem, but using annother display.
The mac´s screen only turns on some seconds in grey when start chim sounds, but it turns off, however, I could run the mac but keyboard, keyboard backligth´s and mouse pad don´t work
I ran the Apple Hardware Test complete and It says there is no problem. This not The truth.
Thying a solution, I did a recovery from newest version and now it get worst and only can see the computer torning on, chim sounds, screen goes on in grey, them screen torns of ando the white ligth gets on and some seconds later start twinkle. Even when the lip reamins opened always, nor the keyboard, keyboard´s bacligth and the mouse pad woks.
I for real don´t know wath to do, I am almost crazy, almost trow this mac to the trash and buy a new windows computer. Please, help to recover my mac!!! -
SAP is not coming up after installing Java Add-in
Hi,
I have installed a Java Add-in for an existing ABAP system. At the stage of "start J2EE engine" it is throwing an error message saying that Java is not coming up after 1142 seconds. I checked config tool and it is working fine. I restarted SAP. After restarting SAP, SAP is coming up and after 1 or 2 mins the disp+work is getting stopped and all the work processes are getting died. I couldn't able to understand & resolve the issue. The system is NetWeave 04. Here is the dev_w0 trace information.
*dev_w0 trace file information*
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Thu Feb 05 12:06:29 2009
B create_con (con_name=R/3)
B *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
[dbcon.c 4489]
M sysno 00
M sid IDS
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 247
M intno 20020600
M make: multithreaded, Unicode
M pid 4780
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 4780) [dpxxdisp.c 1170]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpShMCreate: sizeof(wp_adm) 20328 (1452)
M DpShMCreate: sizeof(tm_adm) 2969176 (14772)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpShMCreate: sizeof(comm_adm) 290000 (580)
M DpShMCreate: sizeof(vmc_adm) 0 (424)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 07530040, size: 3391480)
M DpShMCreate: allocated sys_adm at 07530040
M DpShMCreate: allocated wp_adm at 07531B88
M DpShMCreate: allocated tm_adm_list at 07536AF0
M DpShMCreate: allocated tm_adm at 07536B18
M DpShMCreate: allocated wp_ca_adm at 0780B970
M DpShMCreate: allocated appc_ca_adm at 07811730
M DpShMCreate: allocated comm_adm_list at 07813670
M DpShMCreate: allocated comm_adm at 07813688
M DpShMCreate: allocated vmc_adm_list at 0785A358
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0785A380
M DpShMCreate: allocated wall_adm at 0785A388
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X
X Thu Feb 05 12:06:30 2009
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Thu Feb 05 12:06:31 2009
M calling db_connect ...
B create_con (con_name=R/3)
B *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
[dbcon.c 4489]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 008192) [thxxhead.c 1283]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 9708]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server ord-sapproj_IDS_00 on host ord-sapproj (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Thu Feb 05 12:06:31 2009
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 9893
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 255]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 4780) [dpnttool.c 357]
Kindly help me in getting the solution ASAP.
Thaks in Advance.
Kind Regards,
MogileeswarYour profile parameters are messed up; check your instance profile has below parameters:
jstartup/trimming_properties = off
jstartup/protocol = on
jstartup/vm/home = /opt/java1.4
jstartup/max_caches = 500
jstartup/release = 700
jstartup/instance_properties = $(jstartup/j2ee_properties):$(jstartup/sdm_properties)
j2ee/dbdriver = $(DIR_EXECUTABLE)/db2jcc.jar:$(DIR_EXECUTABLE)/db2jcc_license_cu.jar
rdisp/j2ee_start_control = 1
rdisp/j2ee_start = 1
rdisp/j2ee_libpath = $(DIR_EXECUTABLE)
exe/j2ee = $(DIR_EXECUTABLE)/jcontrol$(FT_EXE)
rdisp/j2ee_timeout = 600
rdisp/frfc_fallback = on
icm/HTTP/j2ee_0 = PREFIX=/,HOST=localhost,CONN=0-500,PORT=5$$00 -
Jave is not coming up after SID refresh where as ABAP is Up
Recently I completed system refresh for Solution Manager 4.0 with DB SQL Server 2005 on Duel stack and Java is not coming up after SID refresh where as ABAP is Up.
Please advise where to check as i check Disp log and Java Dispatcher is not coming up and giving error DB connection.
Thanks
Sachin SachdevaHow did you do the refresh? What method, export with SAPINST(both ABAP and Java)?
Post the DB connection error you are getting.
Can you connect to configtool?
Message was edited by:
Derek Galt -
CSS Service not coming up after reboot
I installed oracle 10.2.0.2 (X86_64) on SLES 9 (x86_64) NON_RAC (single instance with ASM) and the CSS service is not coming up after reboot. If i do localconif reset then it starts up but fail after every reboot. Here is the data to debug:
This is the tail of my $ORACLE_HOME/log/servername/alertservername.log
2008-03-06 22:16:32.587
[client(13472)]CRS-1006:The OCR location /u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr is inaccessible. Details in /u01/app/epsora/product/10.2.0/log/pune-srv-eps-02/client/clscfg_13472.log.
2008-03-06 22:16:32.588
[client(13472)]CRS-1006:The OCR location /u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr is inaccessible. Details in /u01/app/epsora/product/10.2.0/log/pune-srv-eps-02/client/clscfg_13472.log.
2008-03-06 22:16:33.217
[client(13472)]CRS-1001:The OCR was formatted using version 2.
2008-03-06 22:17:54.615
[cssd(13670)]CRS-1601:CSSD Reconfiguration complete. Active nodes are pune-srv-eps-02 .
u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr is accessible through oracle user:
$ls -l /u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr
-rw-r--r-- 1 epsora epsdba 364544 2008-03-06 22:16 /u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr
This is the log file mentioned in above file:
Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2005 Oracl
e. All rights reserved.
2008-03-06 22:16:32.579: [ OCROSD][2546869600]utread:3: problem reading buffer
5db000 buflen 512 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.580: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.580: [ OCROSD][2546869600]utread:3: problem reading buffer
5dd000 buflen 4096 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.580: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.580: [ OCRRAW][2546869600]propriogid:1: INVALID FORMAT
2008-03-06 22:16:32.580: [ OCROSD][2546869600]utread:3: problem reading buffer
5dd000 buflen 4096 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.580: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.588: [ OCRRAW][2546869600]ibctx:1:ERROR: INVALID FORMAT
2008-03-06 22:16:32.588: [ OCRRAW][2546869600]proprinit:problem reading the boo
tblock or superbloc 22
2008-03-06 22:16:32.588: [ default][2546869600]a_init:7!: Backend init unsuccess
ful : [22]
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:3: problem reading buffer
5dd000 buflen 512 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:3: problem reading buffer
5dd000 buflen 4096 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.588: [ OCRRAW][2546869600]propriogid:1: INVALID FORMAT
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:3: problem reading buffer
5dd000 buflen 4096 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.588: [ OCRRAW][2546869600]ibctx:1:ERROR: INVALID FORMAT
2008-03-06 22:16:32.588: [ OCRRAW][2546869600]proprinit:problem reading the boo
tblock or superbloc 22
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:3: problem reading buffer
5dd000 buflen 512 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:3: problem reading buffer
5dd000 buflen 4096 retval 0 phy_offset 102400 retry 0
2008-03-06 22:16:32.588: [ OCROSD][2546869600]utread:4: problem reading the buf
fer errno 2 errstring No such file or directory
2008-03-06 22:16:32.588: [ OCRRAW][2546869600]propriogid:1: INVALID FORMAT
2008-03-06 22:16:32.676: [ OCRRAW][2546869600]propriowv: Vote information on di
sk 0 [u01/app/epsora/product/10.2.0/cdata/localhost/local.ocr] is adjusted from
[0/0] to [2/2]
2008-03-06 22:16:33.217: [ OCRRAW][2546869600]propriniconfig:No 92 configuratio
n
2008-03-06 22:16:33.217: [ OCRAPI][2546869600]a_init:6a: Backend init successfu
l
This is tail of my ocssd.log
[ CSSD]2008-03-06 22:17:55.955 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a1b10) proc(0x7a4e70) pid(13754) proto(10:2:1:1)
[ CSSD]2008-03-06 22:17:56.455 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a3740) proc(0x7a4e70) pid(13773) proto(10:2:1:1)
[ CSSD]2008-03-06 22:17:56.460 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a5b10) proc(0x7a7f50) pid(13772) proto(10:2:1:1)
[ CSSD]2008-03-06 22:18:08.380 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a9770) proc(0x7a1f50) pid(13839) proto(10:2:1:1)
[ CSSD]2008-03-06 22:18:08.383 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a9770) proc(0x7a1f50) pid(13839) proto(10:2:1:1)
[ CSSD]2008-03-06 22:18:11.556 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7aa3c0) proc(0x7ac7d0) pid(13845) proto(10:2:1:1)
[ CSSD]2008-03-06 22:18:17.873 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7ad070) proc(0x7af480) pid(13828) proto(10:2:1:1)
[ CSSD]2008-03-06 22:44:22.700 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a9850) proc(0x7a1e50) pid(14060) proto(10:2:1:1)
[ CSSD]2008-03-06 22:44:22.703 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a22b0) proc(0x7a9850) pid(14060) proto(10:2:1:1)
[ CSSD]2008-03-06 22:44:25.875 [98309] >TRACE: clssgmClientConnectMsg: Connect from con(0x7a32b0) proc(0x7a1800) pid(14077) proto(10:2:1:1)
And this is my css.log
Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2005 Oracl
e. All rights reserved.
2008-03-06 22:17:47.404: [ CSSCLNT][2549892096]clsssInitNative: connect failed,
rc 9
I checked on metalink and found that this error can occur due to some old oracle references or changes in the uid of users but this is fresh install no oracle was there before and we didnt' change the OS user's uid also.
Please let me know what else to check or SR is the only option?
Thanks
Daljit SinghDo you mean CRS rather than CSS?
I note that your database is patched to 10.2.0.2 but your CRS is still at 10.2.0.1. Bring both to 10.2.0.3 and if that doesn't resolve the issue open an SR at metalink.
Do not install the January CPU ... it appears to have issues with RAC that we are currently investigating. -
Databases are not coming up after server reboot(sun solaris).
Hi
OS - Sun OS 5.10 local zone. RDBMS version - 11.2.0.3
Databases are not coming up after server reboot.
We have verified the below points.
Cat/etc/init.d/oracle
$ORACLE_HOME/bin/oradism file permissions are 4550.
lock_sga is parameter set to false.
cat /var/opt/oracle/oratab entries are set to Y
Still Databases are not coming up after server reboot.
Please advise.Hi,
Can you post further information from alert log. Doesn't coming up, means you needs to share the information some thing about your environmente settings about kernel parameter and init$ORACLE_SID parameters details.
That would be easy for others to look into it further to analyze things.
- Pavan Kumar N -
Login page not coming up after applying patch 12374730
Hi ,
Login page is not coming up after applying patch 12374730.
OS : Solaris 10
Application release 12.1.3
Thanks,Did you apply the patch successfully with no errors?
Yes
Do you have any invalid objects in the database?
NO
Did AutoConfig complete successfully?
Yes
Please check Apache log files for details about the error.
Thanks,
Hussein -
Not waking up after sleep when i close the lid of my mac book pro.
Not waking up after sleep when i close the lid of my mac book pro.
Starwin,
Try an SMC reset:
http://support.apple.com/kb/HT3964
Follow the directions that apply to you battery you should not remove yourself, or battery you can remove.
Best -
Hp5510 black ink still not working after two cartridge changes and hard reset
Can you help?
Our 5510 does not print the black ink, we have tried hard reset, two new genuine black printer cartridges and it still refuses to play ball. All other colours print ok.
Thanks steveHello @Bigeady860,
Welcome to the HP Support Forums! I see you are running into some print quality issues on your HP Photosmart 5510, you are unable to print in black ink.
I would like you to continue here: Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages, I understand you may have done some of these steps already but I need you to complete all steps in order to resolve the missing black issue you are experiencing.
Please note: There are three printhead cleaning stages. Complete all three stages if necessary. If the printhead is badly clogged, it might require another cleaning cycle. If so, wait 30 minutes after the last (third) cleaning stage to start the first stage of the cleaning process over again.
If you are still unable to print in black ink, I suspect the issue may be the printer and not the cartridge. Please let me know which Country/Region you are in as well as the product Warranty status: HP Warranty Checker
I hope to hear from you soon.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!
Maybe you are looking for
-
How do I open a PDF posted in safari with another program....Isn't there an "open in" option?
I am using my iPad for school in conjunction with D2L. When professors upload documents to the website (mostly using Adobe) I can open the PDF but only the first page of the document comes up. I have adobe reader on my I pad and the instructions say
-
Hello again, I'm inserting a background image on a business card. I can change the opacity to be able to view the text and on the screen it looks great. When I go to print, the background image isn't close to what was on the screen. Any ideas?
-
I was trying to burn a DVD from files in a burn folder. They were pictures from my Nikon camera. I can play videos and movies from the same dvd player. Thanks for any help you can offer,
-
Unable to get to page 2 of the BIOS configuration on R200
I have a Portege R200 that needs to be reinstalled, but I am unable to navigate to the second page of the BIOS to change the boot sequence. Using pgup/pgdn does nothing as well as every other key sequence I have tried including F12 and holding down '
-
Is it possibe to load data from query with restricted key figure(new selection),calculated key figure(new formula) and into ODS or CUBE using RSCRM_BAPI.......