MBP Calibration won't stay

Hi,
I have a MBP 15" with an Envision external monitor hooked to it. When I bring it out from the Screen Saver, the Laptop LCD has this bluish tint to it. I click system preferences, display and "bam" problem solved.
But the reoccurring problem is that this happens ALL the time. What gives?
I found a previous thread where it was discussed, but no answer was given. This guy is having the same exact problem I am. What can I do to fix it?
http://discussions.apple.com/thread.jspa?threadID=1352815&tstart=315

I don't know of a solution to this, but I occasionally experience this on a Mid-2004 PowerMac G5 running 10.4.11 Tiger. It goes into screensaver and when I get out of the screensaver, it the display is out of calibration. I do the same thing you do and it goes right back. Not sure why it does it...

Similar Messages

  • MBP display won't stay off, wakes from sleep

    I have a newish 15" MBP, 1680 display, hooked up to a Dell external monitor when it's at home. When I go to bed I cut power to the display via control-shift-eject, but generally don't put the computer to sleep overnight.
    With this new machine, after it's been running for a while (as little as a day, or as long as a couple weeks), the displays will come on again in the night. Once this happens, the displays won't stay off for longer than about five seconds. If I then put the machine to sleep, it'll wake itself up minutes or hours later (generally not long enough to miss a Time Machine interval). The only cure is rebooting.
    I tried an SMC reset, but that fix only lasted about as long as any other reboot.
    I've since tried systematically removing every peripheral (a USB hub, the external display, any directly-connected iOS devices) and testing display-off after each; no change. I've turned off my Bluetooth keyboard and mouse, then disabled Bluetooth on the computer, turned off wifi, quit every menu extra (jitouch, Viscosity, Dropbox, Pastebot, Fastscripts, Transmit, Teleport), and quit every running application. The problem remains repeatable after every step.
    It's repeatable at the moment — any suggestions for other things to try, preferably short of the reboot which temporarily masks the problem? I'm a little concerned that it's going to manifest at some point while I have the laptop sitting in a bag, which will then cook itself.
    I'm on 10.6.4 now, the problem started on 10.6.3.
    Thanks.

    Try checking the system logs in Applications/Utilities/Console.app for clues. The entries carry time stamps. Usually a wake event will leave some trace. By matching time stamps to the time of occurrence you may find the culprit.

  • MBP SR display latch won't stay closed

    The latch on my new MBP won't stay closed, and the screen won't latch at all or continually pops open. This can be a real pan when the computer is on sleep. Anyone else experience this? Is there an easy fix, short of sending the MBP off for service?
    Thanks.
    JC

    Oops. Duplicate post. Wrong forum.

  • Won't stay at 1:1 mag

    In the Library and Develop modules, when I click on an image to magnify it to 1:1, the image expands to 1:1 and then immediately returns back to fit/fill (depending on what the setting was before). Clicking on 1:1 magnification in the Navigator works fine as well as using the CMD + shortcut; the image expands to 1:1 and stays at 1:1 magnification. I am running LR 4.1 on Mountian Lion on a MBP. I tested in other programs and had no problems. Any thoughts out there? It is really frustrating.
    Brian

    I always thought that's by design.
    Click-hold-release, as opposed to a normal (fast) click, zooms in and out,
    just like click-and-drag.
    I have no problems single-clicking reliably on my machine.
    2012/7/31 Ian Lyons <[email protected]>
       Re: Won't stay at 1:1 mag
    created by Ian Lyons <http://forums.adobe.com/people/Ian+Lyons> in *Photoshop
    Lightroom* - View the full discussion<http://forums.adobe.com/message/4589842#4589842

  • Lid won't stay closed

    The lid on my 15" MBP won't stay closed. It's out of warranty, so I'm looking for something other than "take it to the dealer."

    Hi artwar24,
    It looks like you are running Panther, so you may be out of warranty. If you are and don't have AppleCare, you might try this little procedure I have used successfully for a few years.
    Caveat, this is not for the feint of heart, but with your book at eye level, sight from the side as you slowly close it. This should give you an idea as to which direction the clasp needs to be tweaked. The tension that holds the lid in place tends to tweak it out of alignment over time as it opens and closes.
    Sometimes on mine, with the lid almost closed, I’ll hold the bottom portion with one palm on the front center and exert side pressure toward the front with the other palm. This may fix it.
    Or, before the clasp catches but after it drops, hold it down with a thin object, like a popsicle stick or Q-tip. This will allow you open the lid back up so that you’ll have some working room. Then with thumb and/or forefinger, apply pressure in the direction you feel it needs to go. After a bit, you will get a feel for it.
    Joe

  • MacBook Pro won't stay asleep with external monitor attached.  When sleep is selected from the Apple menu the computer will go to sleep only to continually wake up...go back to sleep...wake up...etc. every few seconds.

    MacBook Pro won't stay asleep with external monitor attached.  When sleep is selected from the Apple menu the computer will go to sleep only to continually wake up...go back to sleep...wake up...etc. every few seconds.  This only happens when using the external monitor. Does anyone have any suggestions?

    Mine does that too. The worst thing is when it goes to sleep, then wakes up and keeps running while the lid is closed and it is wrapped up in a case. I am afraid when the hot weather comes it is going to burn up. I am hoping Apple fixes it in the software or they may have a melted MBP to replace.
    Then when I open the lid it is crashed running at fill tilt, pumping out heat to beat the band. I am forced to hold the button down and reboot.
    I wiped my hard disk and reinstalled my OS, but it didn't help. I reversed my OS to 10.5.0 and it solved the DVI problem but still won't sleep. This post will probably be deleted by Apple, they did it a few days ago. I just don't know what to do, and I consider myself a real Apple expert. Just hoping you realize you are not the only one.

  • EMac won't stay asleep

    All of a sudden, my eMac won't stay asleep. I've turned off all the settings in Energy Saver (including the Wake options for modem/LAN). I also have no USB or Firewire connections.
    I've repaired permissions, optimized system, cleaned caches, and zapped the pram.
    I've tested on/off my LAN. I've also tried unhooking my mouse and keyboard.
    Here is the system and console log after I put it to sleep:
    System Log:
    ===== Sunday, October 8, 2006 7:10:21 PM US/Central =====
    aped[88]: Not affecting super-user process CopyTool[351]. This is just an informative message. It is not causing your problem.
    Oct 8 19:11:32 eMac kernel[0]: System Sleep
    Oct 8 19:11:32 eMac kernel[0]: System Wake
    Oct 8 19:11:32 eMac kernel[0]: Wake event 0040
    Oct 8 19:11:32 eMac kernel[0]: Sound assertion "0 != err" failed in "AppleLegacyAudio/AppleTexas2Audio/AppleTexas2Audio.cpp" at line 960 goto Exit
    Oct 8 19:11:34 eMac kernel[0]: UniNEnet::monitorLinkStatus - Link is up at 100 Mbps - Full Duplex
    Oct 8 19:11:34 eMac mDNSResponder: Repeated transitions for interface en0 (192.168.1.100); delaying packets by 5 seconds
    Console Log:
    ===== Sunday, October 8, 2006 7:10:42 PM US/Central =====
    Oct 8 19:11:34 eMac mDNSResponder: Repeated transitions for interface en0 (192.168.1.100); delaying packets by 5 seconds
    Here is an overview of my eMac and graphics card:
    Hardware Overview:
    Machine Name: eMac
    Machine Model: PowerMac4,4
    CPU Type: PowerPC G4 (3.3)
    Number Of CPUs: 1
    CPU Speed: 1 GHz
    L2 Cache (per CPU): 256 KB
    Memory: 1 GB
    Bus Speed: 133 MHz
    Boot ROM Version: 4.6.4f1
    ATI Radeon 7500:
    Chipset Model: ATY,RV200
    Type: Display
    Bus: AGP
    VRAM (Total): 32 MB
    Vendor: ATI (0x1002)
    Device ID: 0x5157
    Revision ID: 0x0000
    ROM Revision: 113-xxxxx-116
    This problem is very annoying. I have to shutdown my computer instead of putting it to sleep. Any help would be appreciated. Thanks,
    Chuck
    C2D 20" iMac, G4 1.33 iBook, 1Ghz eMac, G3 333 iMac (Blueberry)   Mac OS X (10.4.8)   5G iPod, 2G 4GB Nano, 3G 20GB iPod, 512MB iPod Shuffle

    This is for a Mac that won't sleep.
    First, read things in Apple doc.#25801 on sleep settings.
    USB devices and hubs often cause Macs to not sleep or wake quickly from sleep (notably HP printers and scanners, HP all in ones, and Cannon scanners). Disconnect all USB except for keyboard and mouse and try. If it sleeps, add one back at a time testing after each one to find the culprit.
    If you've set your Mac to recieve faxes, it may not be able to sleep. It might also have a damaged preferences file.
    If you use your Mac for faxing, open System Preferences. click Print & Fax, click the Faxing tab, and uncheck the Recieve Faxes On This Computer box.
    If that does'nt work or you've never faxed on your Mac, go to Finder/Hard Drive /Library/Preferences/SystemConfiguration and delete the com.apple.PowerManagement.plist and com..apple.AutoWake.plist files (if your Mac asks, type your admin. password).
    If the latter file isn't present in the folder, go to user name(probably your name)/Library/Preferences, delete the com.apple.systemuiserver.plist file, and reboot your Mac.
    Hope this helps!
    P.S. One member here reported this (Michael Gleason);
    "I have had this problem with my IMac G5. It is surprisingly irritating. LaCie's Silverkeeper backup software was the cause. By default it gave itself permission to wake up the computer to check if a backup was needed. Do you have this or a similar program installed which has scheduled activities including wake-up permissions as an option?"
    Dave Hamilton provided this link, xlr8yourmac.com, to a member, which addresses failure of deep sleep with some users that updated and added new FireWire and USB cards.
    tomhorvat adds this; After few days of messing around I found out that I had desktop background (wallpaper) set to change every 1 minute.
    After unchecking "Change picture..." in system preferences (under Desktop/Screen saver), my powerbook went to sleep all by itself.
    Cheers!
    DALE

  • Resolution won't stay on "Default for display" setting upon restart

    I have a Macbook Pro 13" 2014 edition with Yosemite.
    I have a problem in that my Macbook won't stay on the "Default for Display" option upon re-starting... Each time I restart the machine, I have to manually select this option (and then it works fine). Upon reboot, it always starts up as "Scaled". What can I do to make it start up as "Default for Display"?
    I noticed this problem started happening a few weeks ago when I had connected my MBP to an external projector. I did have to change around the display settings then. But now that I don't have it connected to any external display, i'd like it to default to "Default for Display" upon re-starting.

    Thanks for that... It led to me solving the issue.
    If you care to know the full story... Once I did those steps, I realized something important I didn't notice before... Upon restart, the machine would indeed to startup in "best for display"... You can tell by the "high resolution" of the background image and dock-icons, etc... The screen would then flicker for a second and would go to "low resolution". That led me to thinking it was one of my startup apps that was causing the problem... And thus not related to my connecting to a projector like I thought, nor to the actual restart of the machine itself. I then discovered the problem app ("iDisplay") and removed it from my "login apps"... and problem solved.
    Thanks!

  • Highlighting text won't stay on

    When I highlight text it often won't stay on, and when it does and I try to move the selection, it just beeps at me and sits there.  What's up?

    Ok. In System Preferences > General, Apple applies the term “Highlight” instead of “Selection” color.
    In Pages v5(.2), I select a passage of text and it reflects my first sentence color setting. You can leave this alone and visit any menu or side panel setting, and the selection in the body text will remain selected. It will remain selected, if you leave the Pages document and click in another application. When you return to this Pages document, click anywhere but the body text to regain document focus. The next click in the body text should be a click/hold/drag on the selection to move it, or a press of the space bar to remove the selected text. This is mouse-based behavior.
    If you are using a Trackpad, whether built-in or external, you must be very careful not to brush against it while in your Pages document, or your selection focus will be lost.
    I am using the above Pages on OS X 10.9.4 and do not experience a loss of selection, or an inability to drag/move or remove the selection. I have tried with both mouse and Trackpad following the preceding guidelines and cannot reproduce what you have stated.

  • New Pioneer DVR-110 installed, "patchburned", BUT drive won't stay closed.

    Have had some good advice on how to intall a new DVD/CD drive, but after installing a New Pioneer DVR-110 (I thought succesfully) on my G4, and downloading Patchburn for Panther, the DVD drive now won't function as the computer keeps ejecting or opening the drive tray.
    After installing the drive, I installed Patchburn, and Toast did recognize the drive. I then tried to verify disc permissions on the computer and it kept getting hung up during repair/verify saying it lost connection with the drive manager. Tried Onyx to repair/verify permissions and it too gets hung up. (Had to force quit)
    Any advice on how to get the drawer of the DVD drive to stay closed and what else I need to do to get it working?... Alas I can not even reinstall my original OSX software now as I can't boot from the disc drive since it won't stay closed.
    Thanks, Rob
    G-4 Quicksilver   Mac OS X (10.3.9)  

    You can verify the closeness by opening the empty drive door with the KB and then hold the door open and close drawer with the KB.

  • My Itunes will not stay open, I have uninstalled it and reinstalled it and it still won't stay open

    My Itunes will not stay open. Everytime I open it it just gives me a wait signal and then closes down on it's own. I have uninstalled it and reinstalled it and it still won't stay open.... what should I do now?

    Try removing the Genius database.  In the "Finder" go to the /username/Music/iTunes/ folder and delete the "iTunes Library Genius.itdb" file. This may allow the program to launch again. This file will be recreated upon first use of the "Genius" feature.

  • My spooler won't stay running, I can't add printers.

    My spooler won't stay running, I can't add printers.
    Not able to figure out even after firewall on/off, network on/off and all setting to default...
    Regards
    Reddy

    find some possibility solution for spooler wont start here
    https://social.technet.microsoft.com/Forums/en-US/d875ab83-1b17-4a28-8738-e67249a2bdfd/cannot-print-after-update-to-81-printers-gone-print-spooler-keeps-stopping-cannot-add?forum=w8itprohardware
    I recommended this step
    1. do printer troubleshooting
    http://windows.microsoft.com/en-us/windows/printer-problems-in-windows-help#fix-printer-problems=windows-8&v1h=win8tab3&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1
    2. Uninstall antivirus using removal tools (Kapersky)
    3. Registry trick as
    JSB43211 suggested, backup your registry before perform this
    1. Open Regedit as Administrator 
    2. Find the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\ key. 
    3. If you are on a 64-Bit machine, browse to the "Windows x64" sub-key (else "Windows NT x86") 
    4. Under the "Print Processors" sub-key DELETE ALL THE SUB-KEYS EXCEPT "winprint" key 
    5. Start the Print Spooler service. 
    6. Test to see if you can Add a printer. 

  • I have a issue with my mac book pro. For some reason it won't stay powered on. I can't get past the apple loading logo. The battery is fully charged so it is not the problem. Can anyone tell me what the problem may be and how can i get it resolved?

    I have a issue with my mac book pro. For some reason it won't stay powered on. I can't get past the apple loading logo. The battery is fully charged so it is not the problem. Can anyone tell me what the problem may be and how can i get it resolved?

    The battery is fully charged so it is not the problem.
    What happens when you use the MagSafe?

  • My iphoto quites unexpectedly everytime I open it and says closes while using the eOkaoFr.dylib plugin. Does anyone know how to fix this? iphoto won't stay open for more than 1 minute at a time.

    My iphoto quites unexpectedly everytime I open it and says closes while using the eOkaoFr.dylib plugin. Does anyone know how to fix this? iphoto won't stay open for more than 1 minute at a time. Help anyone?

    Is there a crash log? If so post the first 100 or so lines o fit
    Do you know what the ofending plugin is? and where it came from?
    LN

  • I currently have a DROID RAZR M and I'm 1 year into my 2 year contract.  Since the Kitkat update, the phone won't stay charged and it's very buggy.  I know this is not Verizons fault but it's also not mine. I would like to change my phone to an iPhone 5s

    I currently have a DROID RAZR M and I'm 1 year into my 2 year contract.  Since the Kitkat update, the phone won't stay charged and it's very buggy.  I know this is not Verizons fault but it's also not mine. I would like to change my phone to an iPhone 5s and keep my same plan but switch to the Edge program. Is this possible? I don't think I should have to pay an early termination fee or anything like that since my phone has become almost unusable. I know under normal circumstances you have to wait 2 yrs to upgrade but due to the update and the poor service I'm now getting I hope Verizon can make an exception. Thank you.

    How recently did you switch?  If it's less than 60 days, then Verizon simply reinstates your previous account.  The fact that you were on the EDGE plan and mailed the devices back, and they apparently are somewhere in the system, could cause complications, and it might just work out that you just go back on the same plan and they set you up with the same devices.  I'm not sure how it will go - but since you are still being billed for the devices... 

Maybe you are looking for

  • Update  option  is  missing

    hello   today  i  updating  after  effects  to  v12.2  but  when  i  opened  the  wndow  i  noticed that  the  update  option  is  missing  from  help  menu!!!

  • How to start and keep Skype at contacts, no home for default?

    iMac Snow Leopard 10.6.8, skype 6.15 (335) How can I start and keep skype showing my contacts by default instead of the no_idea_why_it_exists_ "home" option?  I NEVER use (and have no need for) the home stuff. Thanks.

  • Keine installation von photoshop 11

    ich habe photoshopelements 11gekauft , heruntergeladen, installiert. aus versehen gelöscht. anschliessend neuer download. versucht zu installieren - fehlermeldung. support advisor kann keine fehler feststellen.

  • Unable to limit podcasts that sync to iPod

    I accidentally loaded a large number of episodes of two podcasts. I thought I could just uncheck the checkboxes for the ones I don't want to sync right now. I did that and it still wants to have room on the iPod for all of the unlistened podcasts bef

  • RIP webOS! We'll miss you!

    With today's emailed announcement from HP about the impending end of support for webOS, it has become a sad day for many of us! I (as well as many other Experts and Support Agents) still own functioning webOS phones and TouchPad tablets, and they hav