MBP Core 2 Duo randomly restarts when closing lid

Randomly my 2.33 Core 2 Duo restarts when closing the lid instead of going to sleep.
A real pain when your in the middle of something
Anyone know a fix ?
Recently had a new logic board (due to faulty graphics card) and hoped this might also cure the restart at sleep problem. Did not.
Advice welcome.
Thanks

I would suggest you to reset the power manager to check whether the issue resolves. If the issue persists please contact Apple Authorized Service provider for further troubleshooting.
In this case I suspect the logic board or may be the sensors as a issue but to confirm it is always good to contact an AASP for further troubleshooting.
To reset the Power manager refer this article http://docs.info.apple.com/article.html?artnum=303319

Similar Messages

  • MacBook Core 2 Duo reboots upon sleep (closing lid)

    I've had my new MacBook for over a month. Recently it began restarting when the screen is closed. Very annoying problem. There is no warning, my entire system just reboots. Seems like this only occurred after 10.4.9.
    If anyone else is having this problem, please let me know.

    Same thing here... When I close the lid the apple on the cover flash and then I ear the booting cheer, if I open the lid and I see the start screen. It happen to me about 20-25 times and only since about a month (with a c2d macbook, 7 months old).
    Hope Apple will fix this. I don't want to send it in for repair cause it really seems like a software glitch.
    C2D Macbook 2ghz, 1gb RAM, 80gb HD   Mac OS X (10.4.8)   20gb iPod

  • MBP won't go to sleep when closing lid...

    ...but it would go to sleep if I select that manually.
    Is that a mechanical problem or software related ? I repaired permissions several times and reset PMU but nothing changed.
    Any ideas ?

    OK, I forgot to mention... maybe this was important...
    Same MBP with freshly installed SL, no additional software, no system settings changed, no software running, wireless and BT off, same story... Sleep works with every method but closing the lid. Kinda makes me think of a hardware issue.
    I'm expecting a "take it to Apple" answer very soon, but I'm just hoping someone had the same problem before and worked it out somehow, cause I can't figure it out
    Thank you for the answer though...

  • MBP Core 2 Duo First Impressions

    I had the opportunity to test (rough empirical) a Quad G5 2.5 G5 w/6600 cart horse 4Gb RAM 1Tb RAID0 vs MBP Core 2 Duo 2.33 2Gb RAM 120Gb 5400rpm HDD.
    Loaded the same projects onto both machines ... 1 x 518 images and 1 x 296 images. worked on the 518 image project. Previews off.
    Full Screen mode. 1st column MBP, 2nd column Quad
    Straighten: more control v. less control
    Dust (52 spots): faster v. slower (marginally but noticeably)
    Straighten: slower, controllable after first movement v. hesitant/jerky
    Levels: 1.5-2s v. 3.5-4s
    White Bal: 1.5s slider, further 1.5s render v. 2.5s, further 2.5s render
    Exposure: 2.5s slider, further 2.5s render v. 6.5s slider, 5s render
    Straighten: 3s v. 4s
    Double click straighten degrees for data entry (Test 1): 6s v. 11.5s
    Double click straighten degrees for data entry (Test 2): 5s v. 12s
    Straighten (accept data entry): 2s v 3.5s
    Crop: Relatively responsive v More sluggish but relatively responsive
    Recrop (render): 2s v. 4s
    Straighten cropped image (Test 1 small change): 2.5s v. 6s
    Straighten cropped image (Test 2 big change): 4.5s v. 58s
    Straighten cropped image (Test 3 big change): 5s v. 27s
    Straighten cropped image (Test 4 moderate change): 6s v. 7s
    Straighten cropped image (Test 5 small change): 5.5s v. 8s
    Straighten cropped image (Test 6 small change): 6s v. Gave up after >1min
    Generate Previews 1min: 7 images vs. 14 images
    Generate Previews 2min: 15 images vs. 22 images
    Generate Previews 3min: 21 images vs. 31 images
    Export 13 full size JPG's: 1.05m v. 1m
    Rough and ready conclusions:
    - The 6600 graphics card is a dog wrt Aperture (duh!)
    - The MBP Core2 Duo is roughly 2x faster on image adjustments
    - The faster drives of the Quad and 2x CPU's showed its power in generating previews and writing to disk
    - Given notes from Aperture users with 7800GT video, I suspect the MBP Core2Duo would be as fast or maybe faster. I'd love to hear from somebody who can verify
    - Even allowing for the slower disk sub-system, the MBP Core2Duo is more than the equivalent of a portable Quad!!! Now ain't that something!

    Yeehaaa!
    Score one for the G5!!!!!
    OK, updated the Quad with the X1900 G5 and consigned the 6600 to the toy box.
    So, how does it perform?
    Loaded the same projects onto both machines ... 1 project x 518 images and 1 project x 296 images. Worked on the 518 image project. Previews off.
    Full Screen mode.
    1st column MBP, 2nd column Quad w/6600, 3rd column Quad w/X1900
    (When Real-Time noted, there is a fractional lag, but insufficient to compromise adjusting to any desired value WITHOUT resorting to the <Option> key.
    Levels: 1.5-2s v. 3.5-4s v. Real-Time
    White Bal Slider: 1.5s v. 2.5s v. Real-Time
    Exposure: 2.5s slider v. 6.5s slider v. Real-Time
    Perform Straighten (after releasing mouse): 3s v. 4s v. 2-2.5s
    Double click straighten degrees for data entry (Test 1): 6s v. 11.5s v. 2.5s
    Straighten (accept data entry): 2s v 3.5s v 0.5s
    Crop: Relatively responsive v. More sluggish v. Responsive
    Recrop (render): 2s v. 4s v. 0.5s
    Straighten cropped image render (Test 1 small change): 2.5s v. 6s v. 1.5s
    Straighten cropped image render (Test 2 big change): 4.5s v. 58s (NOT A TYPO) v. 2s
    Straighten cropped image render (Test 4 moderate change): 6s v. 7s v. 1.5s
    Straighten cropped image render (Test 5 small change): 5.5s v. 8s v. 1.5s
    Generate Previews 1min: 7 images v. 14 images v.16 images
    Generate Previews 2min: 15 images v. 22 images v. 34 images
    Generate Previews 3min: 21 images v. 31 images v. 48 images
    Rough and ready conclusions:
    - The Quad w/6600 graphics card is a dog wrt Aperture (duh!)
    - The MBP Core2 Duo is roughly 2x faster on image adjustments (Quad/6600)
    - The Quad w/X1900 outpaces the MBP Core2Duo by over 2x
    - The Quad w/X1900 is day and night vs. Quad/6600 ( > 400%!!!!!!!! )
    Santa came early!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    :-O
    G.

  • Fans running too fast on MBP Core II Duo

    Hi there,
    I'm starting a new post 'cause the older one was getting unfruitful. Let me wrap up quickly. I've got both a MBP Core Duo and a MBP Core II Duo. I had notice that the fans on my MBP Core II Duo were very noisy compared to the MBP Core Duo. So I ran smcFanControl (NO I HAVEN'T CHANGED THE SETTINGS AND NO smcFanControl ISN'T BAD FOR YOUR COMPUTER), I just used it for MONITORING PURPOSES. Ok.
    I've capture both results in movies so you can see the differences. I've used a cloned system and compiled some code to give the cpu some meat. Here are some behaviors I've noticed:
    http://web.mac.com/michaf/iWeb/MacBook%20Pro%20Fans/MacBook%20Pro%20Fans.html
    (Just run both movies at the same time)
    1) The MBP Core II Duo runs at a minimum of 2000 rpm vs 1000 for the MBP Core Duo
    2) The MBO Core II Duo shoots very quickly and hangs it's fans much higher.
    3) After a while the MBP Core II Duo has a temp of around 68 with fans running at 4500! The Core Duo instead at a similar temp is down to 2300!
    I'm recording with my machines and it's barely usable with the fans.
    Has anyone noticed the same thing or is it my machine?
    Micha

    The movies in your link don't appear to be working so can't comment on those.
    Your post confirms what I suspect is true about C2D temps compared to CD temps, which is that the C2D is fundamentally no cooler (possibly hotter) than the CD, but Apple have doubled the fan speed in the C2D to make the C2D run cooler.
    Seems to me that Apple bent over backwards to make the CD quiet, and this resulted in them running too hot, and with the C2D they have swung the other way.
    I am using Fan Control 1.1 on my CD to steer a middle course. I have left it with 1000 rpm min but set it to start ramping the fan speed earlier and more steeply as temp rises. So most of the time it is quiet, and high temps which can be reached with the Apple settings are avoided.
    Doesn't help your C2D problem much except to suggest that you use Fan Control 1.1 to devise settings to suit your purposes. I suggest you have Hardware Monitor on continuously (hidden) so that you see what has happened to the temp over typical working sessions using different settings in Fan Control. When you have found what works you don't need to keep Hardware Monitor active.
    C2D can't need 2000 rpm the whole time!
    Mike

  • 13" MBP Core 2 Duo version

    Where can I still buy a 13" MBP Core 2 Duo version?
    I have read to many reviews and blog posts about heat issues in the i5 version for 13" mbps. I have a core 2 duo from 2010 and i love the quiet operation. Now I am in the market to get one for the wife.
    Any pointers where I can still buy a core 2 duo version for the regular retail price?
    Thanks.

    Thanks for the response. I am aware of the refurb link. Was hoping to get a brand new version of it. The ones which are being sold on Amazon are selling at a premium which is not justified (especially for an older model).
    Any other pointers/websites which could have them in stock?
    Thanks again.     

  • Random restarts when talking on the phone on iOS4 and 4.0.1

    Random restarts when talking on the phone on ios4 and 4.0.1. I have tried restoring the factory settings as if the phone was new, but this didnt help, it only wipes it and re-installs 4.0.1, i thought it would be 3.1.3 as this was the factory os that came with it.
    So do not upgrade to ios4!

    thanks nick, i found the thread:
    http://discussions.apple.com/thread.jspa?threadID=2471090&start=735&tstart=0
    ^if anyone hasnt seen this

  • Random restarts when connected to comp.

    So this has been happening for a few months now.
    I plug my iTouch 16gb (1st gen) into my Mac Mini. So I'll get the black screen with the battery indicator... then about half the time, the screen will shut off after three seconds of the battery display screen and restart. After it's done restarting, my battery level drops 1/3-1/2 of what it was before the restart (regardless of battery levels before hand). After these sudden restarts, a regular syncing (no new music or anything, just a sync/update of calendars, bookmarks, contacts, etc.) the iTouch will take around five minutes(!)
    Now the iTouch will also randomly restart when I connect to my iBook. But it has never happened when I plug the iTouch into the USB power adapter (current model). I've tried using different USB cords, doesn't make a difference. I've connected other people's iTouches to computers, never replicated a restart. I've restored, restarted, etc. my iTouch who knows how many times, still get the restarts.
    So I don't know, something wrong with my iTouch hardware wise?
    Thanks!

    This doesn't really help you but mine occasionally restarts when I plug it in to iTunes and so far I've not experienced any problems with my iPod or what's on it when it happens. Just thought you'd like to know you're not alone

  • MBP 2.4GHz Core 2 Duo - Backlight off when booting to restore DVD

    Hi all!
    I have a very interesting issue and I'm not sure what to make of it. 
    I have a MBP 15" (Core 2 Duo, Aluminim, NOT unibody) that shipped with 10.5.  I am restoring the OS with a 10.5 upgrade DVD (was not able to find my original restore disc for the unit).  Unit boots into the OS properly, all hardware works to spec.  However, when I boot to the DVD, the backlight goes out once the DVD is done loading.  There's no inconsistency, it doesn't "come back on if i wiggle it," nothing of the sort. If I cold boot the laptop and restart, the backlight works without issue.  Any ideas on what's causing this? 
    Thanks!

    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.

  • Core Duo random restarts after ram install

    Hi,
    I am aware of kernel panics caused by bad ram, but not random restarts. Well, here is the list of problems since installing 2GB ram:
    1) 1 kernel panic about 10 minutes after installing said ram
    2) 3 random restarts about 24hrs apart while working.
    Is this indicative of bad ram, or do I have a different problem?
    Other than that, I love this mini.
    Thanks,
    Berndt

    Hi Berndt,
    Just wondering if that Mushkin brand memory is still working fine in your Intel MacMini Duo. I've checked out Mushkin's website and they do not list the Intel Mini as a compatable machine but every other Intel Mac is listed. Maybe they just missed it, I don't know. That's why I'm curious as to whether you're having continued success or not.
    Thx.
    Steve

  • Mountain lion not compatible with MBP core 2 duo

    Hi there,
    I have an MBP 17" which has been running on Leopard until the other day. I wanted to upgrade to Mountain Lion so that I can utilise some of its features. So I upgraded to Snow Leopard as indicated on the Apple Store web pages. I bought the disc and had it mailed to me and have installed and clicked and ticked and restarted and done all the things asked of me in the process to get the OS to the most up-to-date version. (10.6.8)
    Now, when I go to Apple's App Store it gives me this message!
    We could not complete your purchase.
    We could not complete your purchase. OS X Mountain Lion is not compatible with this computer.
    So my question is, where do I go from here? Why can they 'not complete my purchase' ? What is 'not compatible' ?
    Model Name:     MacBook Pro
      Model Identifier:     MacBookPro2,1
      Processor Name:     Intel Core 2 Duo
      Processor Speed:     2.33 GHz
      Number Of Processors:     1
      Total Number Of Cores:     2
      L2 Cache:     4 MB
      Memory:     2 GB
      Bus Speed:     667 MHz  DDR2  SDRAM
      Boot ROM Version:     MBP21.00A5.B08
      SMC Version (system):     1.14f5

    If your computer isn't compatible, you might be able to upgrade to Lion.        Computer Compatibility - Lion
    Check to make sure your applications are compatible.         Application Compatibility

  • 2.4ghz Intel Core 2 Duo iMac freezing when trying to update and non responsive

    I have a 2.4Ghz Core 2 Duo iMac.  The updates download but when the mac tries to restart to complete the process the screen is just grey with a tool bar across the top System Updates, however the imac is completely unresponsive and will not even force quit.  I have even left it overnight on a couple of occasions in case it is due to the size if the update but to no success and have to turn the machine off manually.  It operates and functions during use but freezes when shutting down.
    Any one have any experience of this or suggestions please?

    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.

  • Random Restarts when Using Battery

    I am experiencing frequent random restarts on my 2 month old MBP. Serial number says it's a week 13.
    The pattern seems to be when I have 2 gig of RAM and have been using the MBP for about an hour on battery power.
    When I remove a stick of RAM everything seems fine when running on the battery. When running on AC with both sticks it's real random as to when it restarts. With only 1 stick on AC everything seems fine.
    Apps don't make any difference to the restart. The MBP reboots when using InDesign, Firefox, Safari, Office etc.
    I have 1 stick of Apple RAM and 1 of Edge (Tech Corp) RAM. Both 1 gig each. Both work fine on their own but not together.
    Ran the hardware test CD and everything came back ok.
    Are there any additional tests I can do to really nail down where the problem lies or is the next step a call to Apple?
    I am running OS10.4.6 but haven't updated the firmware or security updates. I also have 2 batteries, both calibrated, and it rebots on either battery.
    Thanks.

    I've found a couple of articles on Apple's site for resetting the pmu and pram. I didn't get a chance to do this yesterday but will be doing it later on today.
    Here's the articels I read:
    Reset PMU
    http://docs.info.apple.com/article.html?artnum=303319
    Reset PRAM
    http://docs.info.apple.com/article.html?artnum=2238
    I haven't updated the firmware or security updates yet for fear of battery problems. I might do it once I've got my RAM issue resolved, so I'm running on the factory installed firmware.

  • Reliability on the MBP (Core 2 Duo) -- freeze wise

    I'm currently using the last generation PB, but already sick and tired of the constant freeze issue, and seems like there's no solution to fix and there're more and more users experiencing the problem (check PB AL forum postings)
    I think it's about time for an upgrade...
    I would like to ask anyone who's using the Core 2 DUO MBP, did this problem go away when the book switched to Intel? Any freeze during idle, or from wake up etc? How would you rate it in terms of reliability?
    Thanks for your comment

    I don't care if the thread is 100 pages long. You won't find me on such a thread. The only way you can really get a solution is if someone is able to focus on your situation individually. You start getting 100 people trying to solve 200 problems together, and nothing ever gets done, and you just have a rant fest filled with threadjacking. See what Terms of Use says about threadjacking, rants, and trolling. It is more a problem to try to sort out the mess of that, than try to isolate the problems people are actually solving on the thread. Tell everyone on that thread to start a new topic that has a less obvious cause for others to threadjack, and more obvious cause to isolate their problem alone if they really want a solution.
    CHUD's documentation is rather sparse as to how to get a common mortal to use it, and therefore I don't touch it. There are some features of it, I wouldn't run myself because they sound like they could cause more damage than good unless you know exactly what you are doing.
    If you feel you have a power management or processor issue based on Apple's hardware test CD/Restore disk Startup Manager boot that came with your machine, take it in to AppleCare to have the machine repaired.
    If you have an undetectable issue that appears even after an erase and install, it probably is the RAM that is improperly seated or has gone bad, or a logicboard issue that the test does not find.
    Hardware test is documented here and how to run it for a MacBook Pro:
    http://docs.info.apple.com/article.html?artnum=303081
    And for most Powerbook G4s is here:
    http://docs.info.apple.com/article.html?artnum=86287
    An Archive and Install of an older system on a newer system does not necessarily work, and you may find that causes more freezes. That's because it attempts to install older versions of applications on top of newer ones, and may not always succeed, and you could be left with applications meant for a newer system mixed in with your older system that simply don't work.
    Cache programs like Onyx, Macaroni, Applejack, Tiger Cache Cleaner, etc... can cause freezes if they attempt to clear caches when the machine is writing them because the cache files get corrupted. An Archive and Install won't clean up that mess.
    So is your data backed up at least twice and do you want to try to isolate your issue? Or have I given you enough information for you to get started on your own?

  • "Aperture (3.2) cannot be opened because of a problem." on MBP Core 2 Duo, 10.7.2

    I recently upgraded to 3.2 from the App Store and was able to run the program until today. I am now completely unable to open it. I have tried the standard troubleshooting, including moving the application support files to the desktop, deleting the com.apple.aperture preference file, opening while holding CMD and option, and reinstalling. I have also tried moving my Aperture Library to start the program fresh. Nothing has worked; the same "cannot be opened" error persists.
    I have read about other users having issues with the program constantly crashing, but that specific problem appears limited to Intel Core Duo processors, while mine is an Intel Core 2 Duo running on a MBP 3,1. I am starting this thread to find out if any with similar specs have had the same issue and known how to resolve it. Thank you in advance for your help!
    For any who understand error reports, here it is:
    Process:         Aperture [3286]
    Path:            /Applications/Aperture.app/Contents/MacOS/Aperture
    Identifier:      com.apple.Aperture
    Version:         3.2 (3.2)
    Build Info:      Aperture-201088000000000~1
    App Item ID:     408981426
    App External ID: 4372644
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [158]
    Date/Time:       2011-10-25 08:13:23.285 -0600
    OS Version:      Mac OS X 10.7.2 (11C74)
    Report Version:  9
    Interval Since Last Report:          151592 sec
    Crashes Since Last Report:           16
    Per-App Interval Since Last Report:  1263 sec
    Per-App Crashes Since Last Report:   15
    Anonymous UUID:                      F8A6AE56-E17C-4836-A475-FBC72F4C6A5D
    Crashed Thread:  0
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    dyld: launch, loading dependent libraries
    Dyld Error Message:
      Library not loaded: /Library/Frameworks/PluginManager.framework/Versions/B/PluginManager
      Referenced from: /Applications/Aperture.app/Contents/MacOS/Aperture
      Reason: no suitable image found.  Did find:
              /Library/Frameworks/PluginManager.framework/Versions/B/PluginManager: no matching architecture in universal wrapper
    Binary Images:
           0x100000000 -        0x10078bfff  com.apple.Aperture (3.2 - 3.2) <0FC0DA68-CE13-3BCF-A2AE-700EA0C524CA> /Applications/Aperture.app/Contents/MacOS/Aperture
           0x100975000 -        0x100975fff +GlimsLoaderMinimal.dylib (??? - ???) <3BAA9682-DD18-8442-D38A-7160FC8F7EAE> /Library/Frameworks/GlimsAdditions.framework/Library/GlimsLoaderMinimal.dylib
           0x100978000 -        0x100e26fe7  com.apple.RedRock (1.8.1 - 231.89) <794D7315-0A6F-351C-B77A-D4E50D50DE26> /Applications/Aperture.app/Contents/Frameworks/RedRock.framework/Versions/A/Red Rock
           0x101097000 -        0x10109aff7  com.apple.iLifePhotoStreamConfiguration (2.2 - 2.2) <536AF147-2FB0-3EAF-AB65-F83E8EC63936> /Applications/Aperture.app/Contents/Frameworks/iLifePhotoStreamConfiguration.fr amework/Versions/A/iLifePhotoStreamConfiguration
           0x1010a0000 -        0x1010b0fff  com.apple.iLifeAssetManagement (2.0 - 2.33) <4796FD8D-8F37-3F9D-B989-23E21D5B2487> /Applications/Aperture.app/Contents/Frameworks/iLifeAssetManagement.framework/V ersions/A/iLifeAssetManagement
           0x1010c2000 -        0x101170ff7  com.apple.MobileMe (11 - 1.0.3) <50A10074-AB15-39EE-952B-30D6E5CEB395> /Applications/Aperture.app/Contents/Frameworks/MobileMe.framework/Versions/A/Mo bileMe
           0x200000000 -        0x20000aff7  com.apple.iphoto.AccountConfigurationPlugin (1.2 - 1.2) <5ADCB983-167A-3DD4-BA21-0C81E9FAFA07> /Applications/Aperture.app/Contents/Frameworks/AccountConfigurationPlugin.frame work/Versions/A/AccountConfigurationPlugin
        0x7fff62520000 -     0x7fff62554ac7  dyld (195.5 - ???) <4A6E2B28-C7A2-3528-ADB7-4076B9836041> /usr/lib/dyld
        0x7fff8b2db000 -     0x7fff8b2e1fff  com.apple.DiskArbitration (2.4.1 - 2.4.1) <CEA34337-63DE-302E-81AA-10D717E1F699> /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
        0x7fff8c5ab000 -     0x7fff8c63dff7  com.apple.PDFKit (2.6.1 - 2.6.1) <33A0A777-8CF4-3F36-BB1A-78F8A3D7E8C2> /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/PDFKit.framew ork/Versions/A/PDFKit
        0x7fff8c6f1000 -     0x7fff8c8f3fff  com.apple.AOSKit (1.01 - 87) <E00ACA45-14A4-3894-9001-DDD39667B107> /System/Library/PrivateFrameworks/AOSKit.framework/Versions/A/AOSKit
        0x7fff8d218000 -     0x7fff8d218fff  com.apple.Cocoa (6.6 - ???) <021D4214-9C23-3CD8-AFB2-F331697A4508> /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
        0x7fff8e368000 -     0x7fff8e53cfff  com.apple.CoreFoundation (6.7.1 - 635.15) <FE4A86C2-3599-3CF8-AD1A-822F1FEA820F> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
        0x7fff8ecd5000 -     0x7fff8ecd5fff  com.apple.ApplicationServices (41 - 41) <03F3FA8F-8D2A-3AB6-A8E3-40B001116339> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services
        0x7fff8faa0000 -     0x7fff8fc2aff7  com.apple.WebKit (7534.51 - 7534.51.22) <A52AF4EF-A2AA-3718-AB96-576A5E0A1CB8> /System/Library/Frameworks/WebKit.framework/Versions/A/WebKit
        0x7fff8fd48000 -     0x7fff90020ff7  com.apple.security (7.0 - 55010) <93713FF4-FE86-3B4C-8150-5FCC7F3320C8> /System/Library/Frameworks/Security.framework/Versions/A/Security
        0x7fff90021000 -     0x7fff90030ff7  com.apple.opengl (1.7.5 - 1.7.5) <2945F1A6-910C-3596-9988-5701B04BD821> /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
        0x7fff90ca3000 -     0x7fff90ca3fff  com.apple.Carbon (153 - 153) <895C2BF2-1666-3A59-A669-311B1F4F368B> /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
        0x7fff91990000 -     0x7fff919dbff7  com.apple.SystemConfiguration (1.11.1 - 1.11) <F832FE21-5509-37C6-B1F1-48928F31BE45> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
        0x7fff9232d000 -     0x7fff92397fff  com.apple.framework.IOKit (2.0 - ???) <87D55F1D-CDB5-3D13-A5F9-98EA4E22F8EE> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
        0x7fff927bc000 -     0x7fff927bcfff  com.apple.CoreServices (53 - 53) <043C8026-8EDD-3241-B090-F589E24062EF> /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
        0x7fff930c4000 -     0x7fff93263fff  com.apple.QuartzCore (1.7 - 270.0) <E8FC9AA4-A5CB-384B-AD29-7190A1387D3E> /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore
        0x7fff93a6b000 -     0x7fff93a6bfff  com.apple.Accelerate (1.7 - Accelerate 1.7) <82DDF6F5-FBC3-323D-B71D-CF7ABC5CF568> /System/Library/Frameworks/Accelerate.framework/Versions/A/Accelerate
    Model: MacBookPro3,1, BootROM MBP31.0070.B07, 2 processors, Intel Core 2 Duo, 2.2 GHz, 4 GB, SMC 1.16f11
    Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 128 MB
    Memory Module: BANK 0/DIMM0, 2 GB, DDR2 SDRAM, 667 MHz, 0x7F7F7F7F7FF70000, 0x4F5743353343344444523253324742000000
    Memory Module: BANK 1/DIMM1, 2 GB, DDR2 SDRAM, 667 MHz, 0x7F7F7F7F7FF70000, 0x4F5743353343344444523253324742000000
    AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x87), Atheros 5416: 2.1.14.9
    Bluetooth: Version 4.0.1f4, 2 service, 18 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    PCI Card: pci168c,24, sppci_othernetwork, PCI Slot 5
    Serial ATA Device: TOSHIBA MK1655GSXF, 160.04 GB
    Parallel ATA Device: MATSHITADVD-R   UJ-857E
    USB Device: Mass Storage Device, 0x1307  (USBest Technology Inc.), 0x0330, 0xfd100000 / 3
    USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd400000 / 2
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x021a, 0x5d200000 / 3
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8205, 0x1a100000 / 2

    @Frank: I did read through the article shuttersp33d posted. Unfortunately, for my scenario, the support doc redirects me to a page for OSX Lion reinstallation and recovery:
    If you purchased Aperture from the Mac App Store and are running OS X Lion:
    See the article OS X Lion: About Lion Recovery for instructions about how to reinstall OS X Lion.
    That seems overkill and very inconvenient. Can I resolve this issue by restoring PluginManager files from before I installed FC, or something like that?
    Thanks again.

Maybe you are looking for

  • How to prevent multiple users from updating the same data in coherence

    Hi, I have a Java Web Application and for data cache am using coherence 3.5. The same data maybe shared by multiple users which maybe in hundreds. Now how do I prevent multiple users from updating the same data in coherence i.e. is there something in

  • Programmatically creating a Rendezvous : missing variable in Result container

    Hi everybody, For my tests purpose, I need to programmatically create a sequence. In this sequence, I need to insert Rendezvous steps. Everything works fine when creating them, but when I execute the sequence / steps created this error always show up

  • Help with flash

    Here's the link: http://www.oldshoecreative.com/KnexGen/convergence_alignment.htm I've placed a flash animation on this page put it won't play. It plays when I test it on my local machine. Help me please.

  • Missing serial number

    Hello: I am a registered user of CS3 and have the full version of PhotoShop at work and, as allowed by license, at home. But I wanted to install an older copy of PhotoShop Elements (1.0.1) that came bundled with one of the several dozen Adobe product

  • Full length region

    I have a question that I wonder if anybody has encountered before and can help me with. Is there any way to have full length region after your region has been set up? To be precise, I need to have a 'footer' region in my page. Yet my page already loo