MBP Display with G5

Is there any way of using my MBP screen with my G5 tower? they both have DVI if that makes any difference...
I'm selling my G5 and I don't want the buyer coming to my home (weirdos out there, you know!) and I don't want to haul my 20" monitor to Starbucks.
Any input would be appreciated.

DVI is irrelevant, as the ports on both machines are output only (the MBP doesn't have a 'video in'). You need ScreenRecycler. The demo version should do the trick for you.
http://www.screenrecycler.com/home.html

Similar Messages

Brightness of MBP display vs. 23" ACD

I was under the impression that these two should have similar brightness. However, my 23" ACD is much brighter. Is this normal or do I accidentally have some settings tweaked on my MBP. I just got it and have made sure that the display is turned on all the way (using f2). Any suggestions?
Frankie

When calibrating my MBP display with ColorEyes and a Spyder2 I only get 157 cd/m2 while my 23" ACD will top 300 cd/m2.
Furthermore, the MBP has very low saturation, little contrast and a strong green color cast. Compared to the ACD this is very obvious.
I have tried about everything possible to match both display, but to no avail. The culprit seems to be the factory colour profile "Color LCD-42715C0.icc" which can be found in "Library/ColorSync/Profiles/Displays". No matter what I do to it, even deleting it won't change anything. It will be recreated next time I start my MacBook Pro.
Regards,
Roman

Using Cinema Display with mid-2010 MBP, post-Yosemite: corrupted MBP screen

For a couple years I've been using a 27" Cinema Display attached to my mid-2010 MacBook Pro 15". The dual-display setup works great for my home setup.
However, since upgrading to Yosemite, the MBP display often completely corrupts and reverts to complete gibberish, with fragments of the UI and desktop littered all about the screen. Dragging a window over to that screen usually "redraws" it sufficiently enough to keep working, but soon the problem re-appears. The screen of the CInema Display (my main working area) never corrupts, only the MBP screen.
My setup worked great in Mavericks, but something in Yosemite isn't driving both displays properly. Can anything be done, aside from downgrading to Mavericks?
Andy

I am having this exact same problem. 2010 iMac with NVIDIA GeForce 9400 256MB. I have it hooked to a 30" display through a DisplayPort to DVI-D adapter. The 30" is fine, but I have graphical corruption constantly on the main iMac screen.
This all started as soon as I updated to Yosemite a couple days ago.

External displays with similar pixel density to 17" MBP display?

I've got a 17" MacBook Pro, native resolution 1920x1200, which is quite high in terms of pixel density. I have a 24" external Samsung display, also 1920x1200, which means the pixel density is lower. It works fine, but (as you might expect), screen items increase in size rather noticeably when I drag from the laptop display to the external display. (The 24" LCD Apple Cinema Display is also 1920x1200, so the same thing would happen). I've been looking all over the place, and I can't seem to find an external display in the 20-24" range that has a resolution higher than 1920x1200. Ideally I'd like to find a display with the same amazing pixel density, so everything is the same size on both my laptop display and on the external display. I don't know what that would be--probably something like 2048x1152 on a 20" or 22", and 2560x1600 for a 24". Even Apple's 30" Cinema Display at 2560x1600 (or what I imagine will be the new 27" LCD coming out later this summer, probably at 2560x1600) would suffer from this problem, because while the resolution is great, the screen size is so large that the pixel density is lower and once again screen items would increase in size when moved from the laptop monitor to the external monitor. I don't really care about screen size or cost. I'd buy a 20" display, or a 30" display, at pretty much any price, if the pixel density were identical to my MacBook Pro. Anybody know where I can find something like this?

The pixel densities of the 15" hi-res MBP at 1680 x 1050 and the 17" at 1920 x 1200 are really quite extreme — the 17" slightly more so than the 15". To read the "fine print" on those screens without a resolution-independent user interface (which the Mac OS doesn't yet offer), most users have to sit closer to those displays than they'd want to be to a 27" or 30" display, simply because for a viewer sitting that close to it, the bigger display would extend outward beyond the central field of sharply focused vision. One would constantly be leaning forward and back: in to read the menus or palettes and then out to see the whole screen. That would be pretty tiring. Thus I think it's quite unlikely that we'll ever see 30", 27" or maybe even 24" displays from Apple or anyone else at the same pixel density as the highest-resolution MBPs: 133.2 pixels per inch for the 17" and 128.6 for the 15", compared with 108.8 for the 27" iMac and 97.7 for the 30" Cinema Display). The current standard-resolution 15" MBP at 110.3 actually has a lower pixel density than the 13", at 113.5.
Interestingly, the current 24" Apple LED-backlit display at 113.2 has almost exactly the same pixel density as the 13" MacBook Pro screen. For someone who wanted things to stay the same size when moving from screen to screen, that would be an ideal pairing. But the 13" MBP sure wouldn't be any match for the 17" in terms of screen real estate when each was being used as a stand-alone portable.

Unable to use any Apple Cinema Displays with unplugged 2011 MBP

My older MBPs have worked with Apple Cinema Displays (I currently have a few year old one and a 2011 27" ACD) while unplugged. My new 15" MBP however needs to remain plugged in to allow waking (or prevent sleeping) when hooked up to the display in clamshell mode (computer is closed). Is this a bug, a problem with my configuration, or just the way it is?
Thanks for any replies.
Jeff

Jeff,
if you want your settings to be the same plugged in while not plugged in, you'll need to do so in energy saver preferences in system preferences.
once there, you can tell your computer how to act when on battery power or when plugged in. This means telling it to not sleep even when not plugged in, or visa versa.
if you're talking about using your MBP closed while using the ACD, all you need to do is close it, and move your mouse around. it'll wake up but your ACD will become the main display with your dock and toolbar.

Unibody MBP owners with *working* external displays, please chime in.

I'm trying to determine if there's any use at this time to try to exchange the MBP (unibody) I have now with another unit in the hopes of getting proper external display support. (To be clear, I'm referring to the external display problems many of us are having, like in this thread, and this one, and others.)
I'm sure there are others suffering from this problem who are simply seeking another datapoint in determining whether or not exchanging one's unibody MBP for another are of any use at this time. So the question here is:
If you have a unibody MBP, and you are successfully driving an external monitor without issue (using the Mini DisplayPort to DVI Adapter), can you kindly post the following information?
1) External display model (manufacturer and model)
2) External display screen resolution
3) Any information about DVI cable, length, brand if applicable, etc.
4) Have you confirmed proper operation in both 9400 and 9600 GPU modes?
5) If you know, is your MBP equipped with the 9c84 or 9c85 built-in display panel?
6) If your setup wasn't originally working, but now is working due to a unit swap or swapping out of the Mini DisplayPort to DVI Adapter with a new one, can you kindly note that?
Please do not consider yourself representative of a properly working external display setup if yours looks mostly good, with just minor artifacting--that is, for the purpose of this thread, please consider "working" to mean only perfectly normal operation of an external monitor from your unibody MBP.
Are all of the above points necessarily relevant? I don't know yet, but I figured it's best to try to get as much information from those who have working units, to try to determine what's relevant and what isn't.
Why am I asking this? Because I've already wasted enough time with this unibody MacBook Pro, now on my third unit, and I do not want to waste time making trips to the store to exchange units (and the time necessary for restoring to the new unit, etc.) if it's not going to help things. (The previous two replacements had nothing to do with this particular problem, and I didn't have my external display until the third unit, so have no idea if the previous two suffered from this particular problem or not.) If it seems that an exchange from one unibody MBP to another isn't going to help, then those of us who need to resolve this might learn more information with which to make a decision. Right now, I'm seriously considering exchanging for the current 17" MBP with matte display, even though it's not the new unibody design, and doesn't quite match up in the specifications with the new 15" MBP--I just need to get my setup working, and figure the older style of the 17" might be more tested and worked out.
Thanks in advance to those of you who fit the bill and answer these questions.
NOTE: If you have more relevant information to ask of those with working setups, please do; but please avoid the discussion of your problems if you're among the ones (like me) with external display issues, as there are other threads for the discussion of that (like the ones linked above). Ideally, I envision this thread as more populated by the responses of those with working setups.
Message was edited by: isonoise
Message was edited by: isonoise

Mine works perfect.. This is AFTER a logic board replacement for the 9600's BSOD problem
1) Dell 2007WMP
2) 1680x1050
3) Cable that came with monitor
4) Post repair only really using 9600, though 9400 seemed fine too
5) LG (9C84)
6) Logic board replaced last week for BSOD problem. (That board had external monitor refusing to wake problem as well).
Message was edited by: Robert Derelanko

Suddanly Mbp display has got inverted colors with black on white settings. in universal access. When I connect external display(tv), TV display is normal. I reinstalled os x lion. But it did not help.

Suddanly Mbp display has got inverted colors with black on white settings. in universal access. When I connect external display(tv), TV display is normal. I reinstalled os x lion. But it did not help. I had this problem before but it solved after reinstalling os x lion.
Did you have this problem? What should I do?

Sorry, its not an external display. I changed out THE display in my imac. When I hooked up my wife's display it was photo negative and the imac was color. I changed the Universal Settings and the external display went to color and the imac went to photo negative.

Possible to use external display with MBP on battery & in clamshell mode

i can use the extetrnal display with my recently purchased MB Pro - lid is closed and external display works.
but the moment i try to do this with the power not connected to the MB Pro - MB Pro goes to sleep. i can wake it up with the external keyboard but it goes back to sleep in a minute or two. and this problem goes away if power is connected.
anybody else face this? has a solution?

where do i find that option - this is what i have on my machine.
http://img.skitch.com/20090922-cpmepik2kewnsbm1g851drwryq.jpg
http://img.skitch.com/20090922-p4s3grein7kgxi3sqbsbm25kfm.jpg
Message was edited by: msim20

Installation of 27" cinema display with macbook pro silver key and bootcamp

For everyone out there who may be interested in using the new 27" cinema display with an older Macbook Pro Intel with silver keys and bootcamp.
What is needed:
1. Apple 27" cinema display.
2. Macbook pro Intel silver key model
3. Altona Dual Link DVI to Mini DisplayPort Converter (Model AT-DP400)
4. Bootcamp 3.1 drivers from Mac OSX Snow Leopard V10.6.3(retail)
Procedure:
1. Update your display software on the Mac OS side. Apple has posted an update on their software downloads page, "LED Cinema Display Software Update 1.0" After doing so, make sure that the 27" CinDisp is operating correctly and you can change the brightness from the system settings.
2. On the Windows side, install the bootcamp 3.1 drivers. These are on the Snow Leopard distribution CD. However, there is a bug in the .msi installer that causes the installation to go into an endless loop. This must be resolved during the installation of the drivers. The following article discribes how to do this:
http://discussions.apple.com/thread.jspa?threadID=2305631&tstart=0
3. After you have successfully installed the bootcamp 3.1 drivers, then install Apple's bootcamp update: "Apple Magic Trackpad and 27-inch LED Cinema Display Update for Windows 32 bit".
Good luck, it works!

I have the same MBP and recently bought a 23" cinema display on Craigslist for $140. It works great. I had a display port to DVI adapter and it worked fine. Built a stand to hold the laptop vertically so it's out of the way. Don't know about older displays but anything with DVI should work fine.
The screen size and resolution are great for photo editing. I now have the best of both worlds, a display that rivals my wife's iMac and portability.

Mini display with vga adapter and vga multiplier

running into problems with the mbp using a mini display adapter to vga and a vga multiplier. no signal at the projector. is there any difference between a vga signal from a pc and a vga signal from apple's mini display adapter to vga? ie. bandwidth, resolution, etc.... would upgrading to a new os ('lion') help in this problem? many thanks

Hi Guys,
Checked the mini display with Dell flat monitor and Samsung LCD tv , works perfect. The VGA port of my old monitor is not in good condition.
-Abhishek

How do you use multiple displays with a MacBook Pro and iMac

I have an iMac and a MacbookPro laptop both upgraded to OS X 10.9 (Mavericks). I'd like to use multiple displays with them. Can I do this without an Apple TV? They are both on the same network. If I can, can someone please give some instructions on how this can be done?
Thanks!

Both computers have ports for external monitors. Check your user manuals. Only one display can be added to the MBP, but newer iMacs have dual Thunderbolt ports.
Do your own Google research to learn what to do, but reading your manuals should be all you really need. It' not rocket science yet.

Can I run adobe master collection in a windows partition on a basic mbp 13" with only the intel chipset?

can I run adobe master collection in a windows partition on a basic mbp 13" with only the intel chipset?
I want to install 16 gb ram but I don't think I can change the lack of video card. I wanted this basic machine because it has fairly long battery life. I don't need or want retina at this time. My model is the mid 2012 model. I am running the adobe collection for mac, I want to run the windows versions. Is it possible? What is the most ram I could access using something like fusion 5, assuming I could get fusion 5 to work? would it refuse to run because of the intel chipset and lack of video card?
If I'm wrong and there is a way to add a video card to this model, could some version of fusion and windows 7 access more than 2 gb operating ram?
What cost would I be incurring, and would it be cheaper to buy a windows laptop with more ram than I could access via a virtual machine?
I want to work on a client's work in the windows versions of the creative suite, with occasional usage of after effects for windows, and to use some web plug-ins only available in windows versions, and to try some windows-only video and audio software.
thanks for any suggestions. While many people have told me I can run everything on my macbook, I am concerned about what I think is a limited amount of ram that can be accessed over the virtual machine partition softwares, and I don't know if what I want to attempt is actually possible.
My mbp os is 10.8.2 on a 2.5 GHz intel core i5 4 gb 1600MHz DDR3 with 500 hard drive. the basic 13" mid 2012 machine.
I'm hoping to install 16 G of opertating ram to allow more adobe programs to run concurrently- just when I am working on the mac side.
also, off track but, for years I have wanted a small machine that is more easily portable than my 15" machines. I have only had this used machine for a few weeks, but already I have been very satisfied and used it for presentations at clients. I don't want an air because I really want the dvd burner and player. No matter what apple says about wireless, there are decades of legacy work stored on optical discs all over the world, and I don't want to be unable to open something at a client's office because I don't have a dvd drive. Additionally, I have very large files I want to transfer via ethernet or firewire so that the transfer will take less time and be more secure than wifi. I resist apple's trend to make every machine a disposable toy that is viable only a year or so. I have read reviews that label the mbp it a poor value compared to the air. If all you need to do is text and communicate via wifi, many devices will sufice, and an air is certainly the most elegant. But what about the cost of large ssd's and protecting the drive against damage from shock? I want to be able to move this thing around and the small size is much safer inside my padded bag when I sit in narrow airplane seats, crowded trains and other congested spaces. I am much more likely to be able to borrow a large screen in a client's office ( with the use of one of the three adapters I had to buy) than to be able to borrow a dvd drive that has drivers for mac os 10.8.2. I suspect this may be the last generation of machines that have optical drives and ethernet, and that was why I purchased it so that I could continue to do work into the next few years. I am impressed by the retina display, but I need long battery life. And as beautiful as the retina display is, it is even more of a problem when trying to cross platform with the windows world. I wish I could infuence apple to do a trial product flow for a machine designed to work with 80% of the business world that uses windows. How spectacular that would be. With all their expertise and adept hardware design, to create a machine that cross platforms better than a windows machine itself works? Now that would be an accomplishment. Instead of 8 or 9 percent of the total computer sales, why not aim for a higher percentage? Smart devices will keep moving toward portable computers in power, anyway.

confused, bothered and bewildered wrote:
can I run adobe master collection in a windows partition on a basic mbp 13" with only the intel chipset?
I want to install 16 gb ram but I don't think I can change the lack of video card. I wanted this basic machine because it has fairly long battery life. I don't need or want retina at this time. My model is the mid 2012 model. I am running the adobe collection for mac, I want to run the windows versions. Is it possible? What is the most ram I could access using something like fusion 5, assuming I could get fusion 5 to work? would it refuse to run because of the intel chipset and lack of video card?
If I'm wrong and there is a way to add a video card to this model, could some version of fusion and windows 7 access more than 2 gb operating ram?
What cost would I be incurring, and would it be cheaper to buy a windows laptop with more ram than I could access via a virtual machine?...
Fusion should work on your machine and if you put 16 GB of RAM in (see http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade/DDR3_160 0MHz_SDRAM), Fusion can access a good portion of that. Also, in a Virtual Machine, the guest OS is presented with Fusion's video card emulation, not what's in hardware on your Mac. Of course, finding Windows 7 now that Win 8 has been released could take some doing and the Win 8 Pro upgrade price is supposed to jump to $200 the end of the month. Add that to the price of Fusion and the extra RAM and you're beginning to get into the realm of low end real PC's.
As to cross platform, I assume you're aware of BootCamp (http://support.apple.com/kb/HT1461).

Using a Second Display while MBP display is in Fullscreen use

I recently began using a second display consistently (something I only did sparingly in the past), and I was hoping to find out how to utilize my second display while running a fullscreen application on the MBP display (when in fullscreen, the second display is taken into fullscreen, but only with a solid black), and continue using everything else normally if situated on the second display.

Did you have a specific app or application in mind?

External display with MacBook Pro in Lion

Hello,
Yesterday I bought a Mac OS X Lion, and I found one annoying feature of the system - working on a MacBook Pro (MBP), and very often use an external display, with that do not use display in the MBP. When connecting an external monitor doing video processing,and this activity I was used by Mac OS X Snow Leopard to open the MBP there wasaccess of air to cool the computer. After installing the Lion was the fact that even at very small opening MBP is switched to internal MBP display. This is the functionality of the Lion off somewhere or somehow set? I looked in Preferences, and I have found nothing. Thank you in advance for information on how to solve this problem.

I own a mac mini that stays connected to the 52" LCD 120hz in my living room. The image is perfect, and fits just fine. I did a mini-display port to dvi and got a monster cable adapter for dvi to hdmi which too it to my tv. I did have to go into the tv and set the tv to overscan I think on the image to make it fit and you will have to adjust the resolution on the computer. I can say the colors are darker on the tv and this is just due to the nature of the screen size. Newer LED tvs may be better, but mine is only 1 1/2 years old.
For an external display, just go to the educators link, select your college and you get $100 off. My wife is an educator and I am back in college so it's no hassle. Or they just ask for an ID. I own 2 24" ACD and they are nice. I do photography and a screen calibration is a must. Once done you'll be happy. And docking with the laptop is handy.

Using a studio display with MacBook Pro

I have a MacBook Pro and an older 17" Studio Display with a DVI-D male connector. What do I need to drive the studio display from my MBP? And where do I get them?

Try Monoprice - http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10428&cs_id=1042802 &p_id=5106&seq=1&format=2 - or just do a search if that's not the one you need.
Clinton

MBP Display with G5

Similar Messages

Maybe you are looking for