MBP download issues after update.

Okay, so I did the front row, security update a week or so ago and had the problem where my screen would freeze mid booting. Called apple and they had me repair my disk permissions and rename my startup file. Everything worked fine for a while until recently. I noticed when downloading a program, it goes very slow.. Also when I open up transmission or tomato torren and try to open a torrent file, it freezes and I have to force quit the program. I have no idea what happened to my MBP but I am getting really sick of all the problems I'm getting. It also wont let me connect to my schools wireless internet anymore. Anybody know what I could do to relieve these issues? Thanks.

I am sure that there are other users that have had problems since updating the iOS. Have you totally reset the iPad up as a new device - not from a backup - and you are still having the issues?
If you have done so, have you tried closing all apps? Then when you start using apps - if the iPad works OK up until you launch a certain app - it may be that particular app is cursing the issue. And BTW, have you updated all of your apps since you updated the iOS?
Closing all apps .....
Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

Similar Messages

Downloading issue after updating Mac OS X Tiger 10.4.9

I got an information about there're new versions for iturns, safari, Quick Time, Mac OS X, so I clicked the "update" for all. But after updating, I found the speed of downloading softwares from internet become so slow-more than 30 times slower! I don't know whether this problem is because of the system updating from my original 10.4.9, or other reasons?

That's a lot of updates to digest all at once.
There are no guarantees, but following this procedure when installing updates and upgrades on your Mac will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first.
Turn off sleep mode for both screen and hard disk.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.9 to 10.4.10. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them 10.4.10. compliant. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.

MBP WiFi issue after updating to 10.8.5

I have a Macbook Pro late 2011 and used OS X 10.8.4. Last week installed Windows 7 with latest BootCamp. everythings was fine! Then I updated my Mac to newer version (10.8.5).
Now WiFi just works on Windows and Mac does not find any WiFi networks.
My WiFi security is WPA2.
Any one know how do I solve this issue?
Regards,

Back up all data, then reinstall the OS. You don't need to erase the startup volume, and you won't need your backup unless something goes wrong. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it.

Firewire epson R2400 issues after update to 10.8.4 will not print causes system shutdown

anyone had similar issue and or a fix?

issues after update
Download and install new drivers from the Epson site for your printer model.
Epson Stylus Photo R2400, Drivers & Downloads - Technical Support - Epson America, Inc.

Safari, App Store Issues after updating to 10.7.2

I have been running my imac that came preinstalled with Lion
I am having this wierd issue after updating to 10.7.2 recently
When i run Safari, App Store, Itunes, i can see its loading..
but after 2 hours its still loading.
It just seems to be stuck and its not the Beach ball.. So i dont think it hanged
Its not a network issue as well, since i am typing this on Firefox, which is running perfectly
What could be the reason?

I'm having the same issue on my iMac. I've also noticed the rear of the left side is getting a lot hotter than normal.
I downloaded (from: http://support.apple.com/kb/DL1459) the update again and reinstalled it. But nothing's changed. Is there anything else I can try?
Scott

Syncing issues after updating to 10.3.1.55

After upgrading to itunes 10.3.1.55, today, it no longer recognizes my iPhone 4. I plug it in, the iPhone makes its normal syncing noice. I get a prompt, like always about it recognizing the camera and how i want to handle it. I cancel it, as usual, and then it never shows up in iTunes. I close itunes, connect my phone and it does not start itunes as it normally should. No error messages, just no response. Can anyone help with ideas?

I had the same issue, after updating to 10.3.1.55 it would error out saying something along the lines of not being able to read the catalog or something. I think the error even states do a restore to fix it. Last night that is what I did, clicked restore and then had it transfer all my items back. I'm glad I had just synced my phone prior to the update so the restore was really current.

"KERN_INVALID_ADDRESS at 0x000000ac" I am facing this issue after updateing my device to ios 5 and my app crashes with this error

"KERN_INVALID_ADDRESS at 0x000000ac" I am facing this issue after updateing my device to ios 5 and my app crashes with this error

"KERN_INVALID_ADDRESS at 0x000000ac" I am facing this issue after updateing my device to ios 5 and my app crashes with this error

Issues after updating iPhone3GS to iOS5 on TIM cellular data network (Italy)

Hi everyone
I have issues after updating iPhone3GS to iOS5 on TIM cellular data network.
After installing iOS5 I had to switch from apn ibox.tim.it to wap.tim.it
Since then the phone is unusable for any internet activity that is barely "data demanding" (e.g facebook app take literaly hours to update), everyting requires way to much time... the iPhone is not an iPhone anymore... it's worse than my blackberry with just GPRS on it.
TIM technical support suggested me to switch back on apn ibox.tim.it, but then I would not be able to use internet tethering anymore (they say because of Apple iOS5) ... to bad I need internet tethering for work.
I am seriously thinking to switch ISP or phone.
Anyone did experience same problem / found a solution?

Hi Raia.D,
Welcome to the Support Communities!
The first thing I would suggest is to restart your iPhone. Then tap the Settings app, and you should see Cellular listed on the main settings screen. You should see Airplane Mode, Wi-Fi, Bluetooth, and then Cellular.
Here are some additional troubleshooting steps to try:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
- Judy

HT1414 I cant download apps after updated to ios6

May I ask how come i cant download apps after updated to ios6? Is it any problem during the updating? It show i have to change my county to Malaysia but I already change to Malaysia still cannot download? It stil show the word i have to change my country.

Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
Note: You will not lose any data.
Settings > iTunes & App Stores > Apple ID > sign out and sign in again.

I am having an issue waking my late 2007 MBP from hibernation after update to 10.8

I am having an issue waking my late 2007 MBP from hibernation after I updated to OSX 10.8 Mountain lion. Anything I can do to fix this? I cannot keep doing a hard reset.

for people with this problem in the future. I ended up solving this by taking out and reinserting the RAM. I had previously bought RAM from crucial.com and I thought it may have been a compatibility issue with that. After taking out the RAM and reinserting I have not had the problem. Be sure to insert the RAM with force, almost to the point it hurts. I think the problem for the MAC not waking from sleep was due to the RAM not properly inserted or being jarred out over time and not related to the instal of 10.8. also, if you are no longer under applecare and you call apple with an issue you get retards.
cool. thanks. <3

My MBP doesnt boot after update / Prohibition sign flashes twice and then goes straight to OX Utilities

Hello all,
I thought I would never be here, but I am.
After updating iTunes and Memory Clean in App Store (nothing unusual) my MAC stopped booting properly.
MBP / early 2011 / Mountain Lion
It shows the Apple logo flashing twice the prohibiting sign (cancel circle), after that it goes straight to the OS X Utilities.
Note:
- It recognizes the HD and the Recovery partition.
- Verify permission shows a lot of /Applications/iTunes issues, but I have repaired like 5 times and still showing issues.
- Hardware test passed OK.
- Repair disk, no issues.
- Shift (safe mode) doesn't work (lot of flashing ? folder, apple logo, etc).
- PRAM restarted, twice.
I can't reinstall or launch the ML installer, when I go trough the install process which mandatory requires Internet connection and AppStore login, it states: This item is temporarily unavailable. Try again later.
Please help me, I'm desperate this is my production machine and I'm travelling.
What I'm missing?

You cannot reinstall Mountain Lion from the App Store, but you can install Mavericks which is free and will run on your computer. Here's what you do:
Install or Reinstall Mavericks or Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
OS X Lion- Erase and reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.

Anyone having LTE connection issue after updating to 8.0.2.?

After updating my iPhone 5S to 8.0.2, I can no longer connect my phone to LTE but my iPhone 6 plus is fine. Anyone having the same issue?

Loner T wrote:
From Loss of cellular service or ability to use Touch ID after updating to iOS 8.0.1 on iPhone 6 or iPhone 6 Plus
The Health app won't work in iOS 8 after these steps. It will be fixed in our upcoming iOS 8.0.2 software update.
Last Modified: Sep 25, 2014
There is no IOS 8.0.2 out yet. There is no patch for iPhone5s.
This update is specific for iPhone6/6+ as indicated
Download the file below that corresponds to your device:
iPhone 6
iPhone 6 Plus
8.0.2 is out. But if it's true that 8.0.2 is only for iPhone 6 or iPhone 6 Plus, WHY would it appear on devices that aren't 6 or 6 plus? I have two 6 phones and the update went fine. But the update also appeared on our iPad's, which I downloaded and that went fine as well.

Airport/Linksys issues after update

I have a G5 2.0 PPC that will not connect to my linksys WAP- it had been fine for the last year, without a hickup. I downloaded the latest update about a week ago, and now all I get is there was a problem joining the linksys network. This became an issue immediatly after the update. My wife's iBook had not downloaded the update and is fine, as well as Dell laptop. Is there a way to un-install the last update?

anybody? Am I on my own?

Screen redraw issues after update to 10.7.4

Anyone else seeing screen redraw issues since updating to 10.7.4? Suddenly, the zoom tool stops working or causes visual errors.

thank you FFS48, it really helped and might work fine as temporary solution. I was about to restore my OS from backup to 10.7.3 version... as booting from it made no errors. The latest 10.7.4 update filled my log filles with different error messages like:
2012-05-10 23:53:17,000 kernel: SMC::smcReadKeyAction ERROR PC2C kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8030d4f000
2012-05-10 23:53:17,000 kernel: SMC::smcReadKeyAction ERROR PD0R kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8030d4f000
2012-05-10 23:53:17,000 kernel: SMC::smcReadKeyAction ERROR PN1R kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8030d4f000
2012-05-10 23:53:17,000 kernel: SMC::smcReadKeyAction ERROR PG0C kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8030d4f000
which might be caused by iStatMenus as these log entries are allways next to iStat log entries.
I often need to access my Mac Pro using Back to my Mac from my MBP. Do you know will it still be possible having WiFi on MacPro off?
It is strange, that the latest update delivered more visible problems than benefits....
What I tried to solve the problem and that did not work:
- Disable WiFi sync on iTunes (after reading some forums discussing similar problem)
- Uninstalled Xcode (as some forums suggested)
It is some how related to WiFi and iOS devices that sync to that computer. Switching these iOS devices off - removes the problem, and I believe it should be reported to Apple.
Is there any URL to Apple bug submit form?

Lumia 1520 Battery Discharge Issue After Updating ...

After updating to Denim, my Nokia Lumia 1520 started to experience the following symptoms:
Phone charges to 100%, I disconnect and use an app like Instagram BETA, Internet Explorer, Lumia Camera, or any game--after no more than 5 minutes of use, the phone gives a "Critical Low Battery" alert and shuts down. If I try to restart phone immediately, it makes it to the AT&T splash screen or lockscreen and then same battery message appears and shuts down. If I wait 10-15 minutes after the shutdown to restart phone (without recharging) the phone will stay on, but battery level will report to be in the low 20s or 10s (whereas no more than 20 minutes ago, it was 100%).
When phone is at 100% battery: I take 2-5 photos or record mere seconds of video and I get the same "Critical Low Battery" alert. Upon restarting, some of the photos or video are nonexistent or corrupt files and battery level is reported at 2-5%.
However, if my phone is plugged in to charger, none of these "Critical Low Battery" alerts come up and I am able to use phone as usual. Considering that I cannot take a vacation and capture nature's beauty with an AC adapter always connected, this is a serious drawback.
Steps I've Taken:
Soft-reset
Full factory-reset
Moved all apps off microSD card (this improved situation maybe 5%)
Disabled almost all background app use in Battery Saver
Replaced microSD card when I thought this was a memory write/read issue
Installed "Battery" app to monitor battery use. After 750 data points were logged, my average battery life is reported at "16 minutes," which sounds about right.
My warranty should be expired since I purchased the phone December 2013, so I'm checking in here if anybody has had any luck with battery replacements or with a solution to this issue? At the same time, this issue arose strictly after updating to Denim and I've seen other users report this EXACT scenario. Is there any hope for Lumia 1520 users on this?
Other reported cases:
Battery Issue after Denim update: http://forums.windowscentral.com/nokia-lumia-1520/347112-battery-issue-after-denim-update.html
Battery critically low and shutdown: http://forums.windowscentral.com/nokia-lumia-1520/342343-battery-critically-low-shutdown.html

Hi albertico, TeJazz, and Samgh. Welcome to the Microsoft Mobile Community. We understand your situation and in response to this issue, we suggest that you perform the suggestions in the photo attached. If the issue persists, we recommend recovering your phone's software using the Windows Phone Recovery Tool. This link will work regardless of your location. If the same thing happens, it's best to take your phone to the nearest Care Point in your area for evaluation. Backup first to avoid data loss.
Attachments:
Battery drains fast.JPG ‏147 KB

MBP download issues after update.

Similar Messages

Maybe you are looking for