Mbp found my printer , but shut it down

I added a Kyocera Fs1000 printer to my mbp , i found it under printers and added it . I printed several items anf it worked great. A message than appered saying the item in the usb port was drwing to much power and was being disconnected . I now cannot use the printer anymore . I have unplugged and replugged with no success . I have deleted the printer and replugged it in but my mbp can't find it . Can i do anything to get this printer to work again ?

I believe the suggestion was aimed at trying to ensure the printer had its own AC power.
In the absence of the printer's AC power, it may be trying to pull power from the MBP, which could be bad.

Similar Messages

Just added a number of photos from my phone. It worked fine and I printed other photos but shut it down and Now it wont relaunch!! help.

Just added a number of photos from my phone. It worked fine and I printed other photos but shut it down and Now it wont relaunch!! help.

I need a special tool just to access my own photos?
I suggested "Find any File" because it is easier to use than the Finder's search - the results there will depend, on what you have included in your Spotlight index.
To search using the Finder, open a Finder window; press the key combination ⌘F, and then set the search window to search "This Mac" and "Kind is 'Photo Library'"
Only, if the library should have become corrupted, this may not work. And the search will not look inside the packages.
The whole iPhoto library directory is only 556 MB so I guess the videos are lost for good.
How is the "Importing > Copy items to the iPhoto Library" flag set? See my last post.
If you imported with "store files" in there original location, the photos and videos will have remained on the card, until the crad has been erased.
Is there a way to start iPhoto from scratch so at least I can start over and have it not destory all my data next time?
You can create a new iphoto library, by using the command "File > Switch to Library > Create New".
Is there way to import my photos and videos without using iPhoto?
You can use the utility "Image Capture", that comes with every Mac to import your photos to folders on your Mac.
This program is horrendous!
I never had problems with it and like it, but I understand ....

Does anyone know the street address for Apple's repair center in Memphis, TN? I sent my 2010 MBP for display problems but didnt write down the FedEx tracking number.

I was an idiot and lost the tracking number for my package that was goin to Memphis to be fixed and of course the package supposedly still hasn't arrived after being sent 3 day ago an was overnighted. I'm pretty sure it's goin to Flextronics but for FedEx to track it they need the street address. All I have is the zip code of 38134. Thanks for the help.

Flextronics:::
5200 Tradeport Drive Memphis, TN 38141
(901) 215-2800

Found 0 results for My browser is missing important items, the whole tool bar...., drop down menu to print, copy, work off line, file, save, book mark, history. I just installed latest foxfire on windows xp. Found some instructions but they called for usi

Found 0 results for My browser is missing important items, the whole tool bar...., drop down menu to print, copy, work off line, file, save, book mark, history. I just installed latest foxfire on windows xp. Found some instructions but they called for using keys my computer doesn't have ( key in OSX There is no file, edit , history, help, tools, navigation, all the things your directions say to use. Also I always get hung up and the message a scrip is running. I don't know what thises scrips are but I sure don't need them.
== This happened ==
Every time Firefox opened
== I just noticed it. It probably happened when I upgraded foxfire.

'''Can't see the Menu Bar''' (File, Edit, View, History, Bookmarks, Tools, Help)?
Turning the Menu Bar on and off is a new feature in version 3.6.
''(Linux & OSX see: [[Menu bar is missing]] )''
''Windows'' Method 1. '''''Hold down''''' the key and press the following letters in this exact order: V T M
''Windows'' Method 2. Press and release the key. The Menu Bar will be displayed; then choose ~~red:V~~iew > ~~red:T~~oolbars and click on ~~red:M~~enu Bar.
The Menu Bar should now be displayed permanently, unless you turn it off again using View > Toolbars. Check mark = displayed, NO check mark = not displayed.
See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
'''Navigation Toolbar, Bookmarks Toolbar and other Toolbars''' under View > Toolbars. Clicking on one of them will place a check mark (display) or remove the check mark (not displayed).
'''To display the Status Bar''', View, then click Status bar to place a check mark (display) or remove the check mark (not displayed).
'''Full Screen mode'''
http://kb.mozillazine.org/Netbooks#Full_screen
Also see:
''' [[Back and forward or other toolbar buttons are missing]]'''
'''[[Navigation Toolbar items]]'''

I have an ipad 2, verizon jet Pak router, canon pixma mg3220 wireless printer. All were working until yesterday. Now I get no air printer found message. Have shut down everything and restarted. No change

I have an ipad 2, verizon jet Pak router ang canon pixma mg3220 wireless printer. All were working until yesterday. Now, I am getting no air printer message. Have shut everything down and restarted. It did not work.

See requirements for AirPrint (http://support.apple.com/kb/ht4356):
If your printer supports AirPrint but does not work then:
Your printer might need a firmware update
Your printer must be on the same WiFi network
Your router must support Bonjour (Zero-configuration networking).
For troubleshooting:
Turn Off iPad, WiFi router (remove from power), and Printer (remove from power).
Turn on WiFi router
Wait 30 seconds
Turn on printer
Wait 30 seconds
Turn on iPad
Try to print.

I spilled a little bit of soda on my keyboard ( more like big drops) and my computer won't turn on but it will still charge. After i spilled it it kept trying to turn on and off by itself until i finally just shut it down

I spilled a little bit of soda on my keyboard ( more like big drops) and my computer won't turn on but it will still charge. After i spilled it it kept trying to turn on and off by itself until i finally just shut it down. Today i tried to turn it back on ( i spilled it last night) and now it won't turn on but when i plug it in the orange light comes on so it still charges.

TBF: You may have been lucky enough not to cripple your MBP immediately with your spill, but a spill such as you describe will have left obvious traces if you ever need to take your machine in for a repair of any kind. And as soon as evidence of the spill is found, any chance of the necessary repairs being performed under warranty will be gone.
Taking the machine in now to be cleaned and have the greasy parts replaced will be expensive, but doing so may save whatever remains of your warranty. For a price, Apple will restore the machine to like-new condition, and at the very least, you will then have a 90-day repair warranty on it. If you have significantly more time than that remaining on your original one-year warranty, and especially if you've bought the extended AppleCare Protection Plan, it would probably be worth taking the machine in to a Genius Bar for a look-over. Ask whether, if you have Apple clean and repair the machine now, your new-computer warranty and AppleCare plan will be reinstated afterward or whether all you'll have is the short repair warranty from now on. If the spill will negate your warranty and AppleCare even if you have Apple clean it, then the cleaning probably isn't worth paying for. But if paying for the cleaning will get your warranty and AppleCare reinstated, it may be worth doing.

MBP shuts itself down during sleep

My MBP shuts itself down durning sleep... or, stays black when I open the lid after sleep. The hard drive is on, but no key pressing will get it running. I have to hold down the power button, til it clicks off; then press it again to boot up from scratch.
Today, I booted up Console and under messages found this:
7/28/12 4:56:21.519 PM Firewall: Stealth Mode connection attempt to UDP 192.168.254.1:64508 from 192.168.254.254:53
7/28/12 4:57:07.000 PM kernel: (default pager): [KERNEL]: ps_allocate_cluster - send HI_WAT_ALERT
7/28/12 4:57:07.000 PM kernel: macx_swapon SUCCESS
is this the signature of Trojan?
How do I correct this?

I'm having almost the same problem and I can't figure it out either. I put my computer to sleep and when I wake it up, the screen comes on with my full desktop, but everything is frozen. I can't open anything. I can't even force quit. I get no response from my mouse (other than being able to move it around- sometimes) and everything on the dock is unresponsive. I did disc repair– no problems reported. I repaired disc permissions– a few glitches, but all taken care of and okay. I restarted the computer, put it to sleep and same thing all over. Should I worry?

I have a Macbook and I left it unplugged. It started up slowly when I plugged it in again, but it seemed fine. Once it started charging I shut it down so it would be easier, but now it will not go past the grey screen with the apple. What do I do?

I have a Macbook and I left it unplugged. It started up slowly when I plugged it in again, but it seemed fine. Once it started charging I shut it down so it would be easier, but now it will not go past the grey screen with the apple. What do I do?
I have Snow leopard on my computer, and I tried to do a hard restart as an article suggested, but it did not work. I also tried cleaning out the PRAM.
The only things I did last night:
-cleaned the history of Firefox out, including cookies
-let it unplugged all night
-plugged it back in the morning, it took a long time to figure itself out, but eventually the time was correct and I got on the internet for a bit
-shutdown the computer since I was going out and thought it would help the computer charge
-came back, tried to turn it on, and found that it would not go past the grey screen the apple on it and the spinning wheel even though I left it for 20 minutes or more
-tried turning it off and on to no avail

Before doing a reinstall, which may not be needed at this point,
Try using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk.
You could have some directory corruption. Let us know what errors Disk Repair reports and if DU was able to repair them. This could just be a start in repairs and you may need a better utility to finish the job.
Then Repair Permissions.
No need to report any Permissions errors........we all get them.
 DALE

Photosmart C4580 won't print - push a button on printer it shuts down

The Photosmart C4580 has been reluctant lately to print anything at all. The documents sit in the spooler but won't print.
I've searched for this problem here and haven't seen same printer, same issue and solution, so here goes...
Dell Dimension 3000
Win XP Pro Service Pack 3
I've had this printer since February 2009. I've set it up on the USB port.
Three weeks ago I upgraded the memory from twin 256 module setup to twin 512 using Dell products. Obviously, I took the PC apart, cleaned the dust bunnies, installed the memory and everything worked great after rebooting - including the printer.
About two weeks ago a carriage jam error popped up. It wasn't jammed but I pulled the ink, reset them and restarted the printer. It worked fine - no noises, no jams, nothing.
Yesterday the printer quit printing at all. It said documents are printing but they just sat in the queue. I've done:
1. HP Solution Center guided solution
(when it asks to hit the Cancel Button and Start Copy Color buttons to print Self Test, the printer shuts down every time)
2. Windows troubleshooter
3. The HP Support solution online
4. Reinstalled printer using original CD
5. Reinstalled using the latest install software from HP online.
*After the latest reinstall, where the program asks you to print a test photo page, it did not print. HOWEVER, after I shut down and restarted the printer, that photo printed! But I can't print anything else since.
Thanks for any help you may be able to provide.
Message Edited by azchurch on 11-21-2009 10:24 AM
Message Edited by azchurch on 11-21-2009 11:20 AM
Message Edited by azchurch on 11-21-2009 12:02 PM
Message Edited by azchurch on 11-21-2009 12:08 PM
Message Edited by azchurch on 11-21-2009 06:33 PM

Okay I can print one document at a time if I:
send it to print
shut down the printer
wait a minute
restart printer

MBP will not start up. was working fine and shut down and put to charge and now will not power back up. Screen will light up and then power shuts back down. Any thoughts?

MBp will not start up. Was woking fine and shut down and put to charge and now will not power back up. Screen will light up but then powers shuts back down. Any thoughts???

Follow these documents.
http://support.apple.com/kb/TS2570
http://support.apple.com/kb/TS1440
http://support.apple.com/kb/HT1455
http://support.apple.com/kb/ht3964
http://support.apple.com/kb/HT1379
http://support.apple.com/kb/ht1379
http://support.apple.com/kb/HT1509

Not working right-will not let me type a new emall, pull contacts, also will not let me use wireless printer-kept shutting down windows.

firefox will not let me type in yahoo mail as new email. will not pull up contacts. also, when I use wireless printer-it shuts down windows.

Couple of points...
DJ_Jynxx wrote:
The thing is, this MUST be an Audition CC issue for two reasons. One, everything worked fine in CS6, which I was using right before I upgraded to CC. I even did a clean install of it by removing CS6 completely.
All versions of Audition can co-exist on the same machine quite happily - there is no interaction between them at all, and the system was designed to be like this. So there's nothing to stop you keeping CS5.5, CS6, CC and even Audition3 on the same machine.
The other thing I'm wondering about is Windows 8. There have been a considerable number of complaints about this doing weird things, including with Audition. I have a system that in many ways is very similar to yours, except that I don't overclock the mobo, and use a professional sound device (or two) with it (RME). The major difference though is that I use Windows 7 pro 64-bit, and I haven't had any of these problems at all. Yes I use it for a living, as well, but I don't bother with multiple DAWs - don't have time for all that these days. But I do use iZotope's RX software in its standalone mode without any difficulty.
I'm not claiming that Audition CC is trouble-free - any number of Mac users will confirm that - but people running it on W7 certainly seem to have far fewer problems with it. It may also be worth trying an uninstall-reinstall of CC - you never know. But differences in preview quality certainly point towards audio drivers, I'm afraid...

Printer not shutting down

At times the printer will not shut down. I press power button and it will be working to shut of for awhile and then will freeze. I then have to unplug it to shut it down. This happens more often than not.

Hi NORCO4655,
I have added a link below that will give you the steps to follow to perform a reset for your printer. If your screen shows shutting down but doesn't shut down it sounds like you need to do a hard reset.
Let us know if this works or if you still have the problem.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03177455&cc=us&dlc=en&lc=en&product=5061082&tmp...
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

Laserjet 1020 does not print / print spooler shuts down.

Print spooler shuts down after installing lj1020_1022-HB-pnp-win64-en and restoreing to previous windows 7 restore point.
I have deleted the printer several times.
Running x64 windows 7. This is a new problem after several months of running consistenly.
BK

I have the same problem but only with printing documents from secure sites (online brokerage) like statements and Tax Documents. The problem exists whether I print directly from the website, or download the document and try to print the file. I suspect the issue is with the driver for the 1020 because I can print the same files on my HP PhotoSmart Plus with no problems. I too am running Windows 7 64 bit edition. The bad print job stops the Spooler. You can Restart the Spooler (it appears), but the minute you try to print anything, the Spooler shuts down again. Rebooting does not fix the problem. The only solution is a System Restore.
After the 1020 shuts down the spooler, even my PhotoSmart cannot print, but it at least produces error msgs to the
effect that "No pages have been selected for printing". Trying to print from the 1020 - absolutely nothing happens - no printer dialog, no error message - just nothing.

Adobe Photoshop CS2 shuts itself down after printing..

Not sure whether I'm in the right place to post this..
In my workplace, we just bought some new iMacs for design class. They are a 2GHz with Intel Core Duo, and has 1GB 667 Mhz DDR2 SDRAM, and running Mac OSX 10.4.8.
The Photoshop CS2 is version 9.0
I've config-ed the five new iMacs so they can print to a printer, using IP printing. Problem is, most of the time after the students sends the document they want to print to the printer, Photoshop CS2 just shuts itself down. Then the dialog box saying 'the software just unexpectedly quit' appears.
It is confusing me, because our older iMacs (that's not an Intel-based) doesn't have this problem, at all.
is it something to do with CS2 compatibility with Intel-based Macs? or something else.. what needs to be done to stop this annoying problem?
Regards,
Meru
iMacs Mac OS X (10.4.8)
eMacs, iBook G4s Mac OS X (10.3.9)

Windows 7 error “key not valid for use in specified state” | The Oracle Instructor

Can some body give me an advice, my cursor can not be controlled after I shut it down, and open again. But this problem goes away after I closed and opened the lid

Can some body give me an advice, my cursor can not be controlled (using pad) after I shut it down, and open again. But this problem goes away after I close and open the lid.

Boot from your OS installer disk and run Repair Disk from Disk Utility.

Mbp found my printer , but shut it down

Similar Messages

Maybe you are looking for