MBP headphone output - left signal louder
When mixing down some music in Logic, I recently discovered that the headphone jack output on my MBP is not very well balanced. The stereo signal is distinctly louder in the left channel than in the right - judging from a rough mix, I need to pan about 20 % to the right in order for the signal to be as loud in both my external speakers / headphone speakers. I have this problem with all the audio I play, be it in Logic, Spotify, iTunes, ...
I'm hoping it's a software problem. Any ideas ? Thanks in advance.
Thanks Brian708 & Courcoul for the suggestions, but I'm afraid neither is the solution...I've got the problem with all my headphones and also when I connect the laptop to my stereo using a mini-jack cable.
I don't notive any difference in volume when I play stuff over the built-in speakers..
Similar Messages
-
Why is the headphones output jack so loud?
The output from the headphone jack on the left of my MacBook Pro 15" (base model, latest as of 16/07/11) is incredibly loud. Even when my Mac has the volume on one 'bar' or 'block' when using the volume buttons, it's still extremely loud and almost deafening. I fear how loud it must be over two blocks, because I simply can't listen to it.
Is there any change the min/max volumes that are possible? This MacBook Pro is only 2 days old.blakei21 wrote:
Changing the output volume in Settings yeilds the same result, still very loud. I also performed a PRAM reset and it's still very loud.. this is a really weird problem :\
Hmmm. Agreed, very weird. There have been many and varied issues with MBP audio out ports. I would try another set of headphones, if possible, and if same issue there, contact Apple. 90 days free phone support, 1 year hardware warranty, 14 day return/exchange period. -
Faint but regular clicks/pops in MBP (Quad Core 2011, 2.0) headphone output
I've seen some scattered posts about this. In my case it's definitely not the motion sensor as it happens if the computer is totally still. I can hear it with the audio turned all the way down and no applications running. It happens every 30 seconds or so-- there's a sharp click followed by a faint electrostatic hum for maybe a second or so. I'm sending it in to have it evaluated. I noticed it immediately upon setting it up for the first time. I reinstalled Snow Leopard and reset the PRAM, neither of which helped. If I install one of my audio interfaces (Saffire DSP Pro or M-Audio FW 410 but still using the Core Audio driver) it does not pass through the firewire to the device. Anyone else having this issue? My old MBP (first gen 2.0 GHz Intel w/CoreDuo) does not display this symptom.
Took my MBP into the Genius Bar and got a replacement and the new machine (out of the box and running Lion, whereas the first one was among the last to ship with SL) behaves identically. I'm wondering if this is a feature, as I'm just now realizing that what I'm hearing may be the audio driver or headphone jack periodically switching on and off. I can make the click happen by doing anything that calls on the core audio driver. This may be clicking on a song in iTunes or even switching between tabs in Firefox if one of them has a lot of streaming content. The click is followed by a little bit of hiss; then, if I do nothing, there's another click maybe 30 seconds later and the headphone port goes completely silent. The 'hiss' is, I suspect, just the normal background noise on the output. When there's actual sound being output (a song, flash video, QT playback etc) there are no clicks or other artifacts. Likewise if I listen to the headphone output for 10-15 mins while doing nothing else (big fun, let me tell you).
If that's what's happening it's an annoyance but not the end of the world. I can't think of a good reason why it should behave like this (i.e. to save power or otherwise redirect resources) and it reeks of crappy hardware or coding, but if it's not affecting the actual headphone or firewire audio output when sound is happening I can live with it.
I could be totally off the mark and for all I know tomorrow it could be doing the above and clicking randomly during audio playback. Curious to know if anyone else who is having this symptom sees the same pattern.
Cheers. -
Beats Wireless Headphones Don't Go Loud Enough
I just bought a pair or wireless Beats headphones to listen to music on my Ipod but I am disappointed that the maximum sound volume is nowhere near loud enough for me.
I got my friend to try them and he said they were too quiet as well so its not just me.
Has anyone else experienced the same thing or got any advice about a way to increase the volume?Hey Imaginos7, Volume is your issue with Beats? Really... Quality of the sound reproduction, durability, overall quality of the product would be much higher on my list of issues. Imaginos, Instead of going for max. volume, and having to deal with some permanent hearing damage (tinnitus) for the last 20 years+/-, (that little ringing in my ears that never goes away-- sometimes I swear the people next to me should be able to hear it), let me give you some advice... "TURN IT DOWN!!!" The ringing never goes away, it is with you, everywhere you go, and it get's madding at times. The only thing I can find for beats headphones output is 115Db, that's just shy of jets taking off and rock concerts! Anything over 80Db, (about the noise of a lawn mower from 5 to 10 feet) for more than 30 minutes is causing you damage, anything over 120Db only takes a few seconds to a few minutes, 140Db+ and you go deaf in seconds! If the volume is more than speaking volume from your headphones-- your doing damage. Now, with that said, If your attempting to drown out the outside world, invest in a good set of noise canceling headphones, unless you like the idea of always having to list to a sharp high C. (And just incase your wondering most of my damage came from racing bikes, from the wind rushing pass my ears for hours on end, the rest of background noise where I work, a few concerts, wearing headphones and age, or so the doctors tell me. And there is nothing that can be done to stop that fool ringing, protect your hearing, OK). Cheers.
-
Iphone 5 iOS 7 headphone output problem
Hi guys,
So the headphone output on my iPhone 5 isn't working properly. There is a lot of background noise and only outputs very quietly on one side. If you start at nothing and slowly turn up the volume then you can hear clear stages and clicks every time you go up by 1. Eventually when you reach the last orange / first red it jumps to an insanely loud level and distorts. The right hand side can be heard very quietly at this point and us distorted as well. Any ideas? The phone is about two a months old and has no visual damage.
Cheers
TomHello Ant80,
Thank you for the details of the issue you are experiencing with connecting to the Internet.
I recommend reviewing the articles below, but the following step specifically stands out to me for the issue you described:
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Tracks: stereo - mono - left signal.
I would like to select the left signal of a stereo track only. How do I do that?
More details:
I have a logic file with 10 tracks, with a cut I would like to re-use. One of these tracks is a stereo track, and the instrument in panned somewhere on the left side.
I would like to use only the left signal of the stereo track, and keep the instrument panned where it is, the cut and the mix, everything else.
I noticed that there is a "mono" icon on the stereo track. This mixes both left and right tracks to a mono signal. This is not what I need. I want to discard the right signal of the stereo track.
Thank you in advance for any help.You can either split up the interleaved stereo track into a split stereo track (via the copy/convert function=control+F in the Arrange or Control+C in the Audio Bin), then separate the split stereo so you'll end up with two independent mono files
or
convert the track to a split stereo file and set the outputs of your 2 Stereo Tracks in the output section to Stereo-Left and Stereo_Right, then you can independently pan/edit the left channel also.
Check out this thread in which I describe the procedure more precisely:
http://discussions.apple.com/message.jspa?messageID=7932256#7932256 -
My Fall 2009 model Macbook Pro DVI output apparently doesn't include audion. Adapting DVI to HDMI works with new LG TV, but doesn't provide sound. Connecting the Macbook headphone output to the TV's RCA jacks give sound with the TV in AV (PC) mode, but no video. Is there a fix for this? Search for a DVI to HDMI adapter that includes a plug for the headphone jack comes up empty, so far.
DVI has never included audio, sorry.
There is also no DVI->HDMI adapter including a plug for audio; such thing cannot work without quite a bit of electronic extra effort.
Instead of much bla-bla, why don't you tell the exact TV model, and we'll try to come up with a solution?
BTW, no home theater AV receiver present, correct? Sound to come from the TV, correct? -
Headphone output stopped working (snd-hda, Dell XPS 13)
Update: I got it working! See my second post; I will leave this here as a reference for those with the same problem.
My headphone output stopped working, and my integrated microphone also stopped working. The speakers work fine, though.
AFAIK, I didn't do anything, and am quite baffled as to why this is. It's worked fine for half a year.
I have a Dell XPS 13; it came installed with Ubuntu, I booted that, where it *does* work (just to eliminate hardware problems).
I'm running 3.16.4-1; I also downgraded to 3.16.3, which didn't help.
I'm testing with speaker-test and mplayer -ao alsa; I normally use PulseAudio, but eliminating that for testing seemed like a sane thing to do. It doesn't work either way.
I also downloaded the hda_analyzer, that has a lot of options, but I'm not sure what most of them mean...
The closest I've been able to get at the problem is this:
[~]% alsactl monitor
card 0, #17 (0,0,0,Headphone Mic Jack,0) VALUE
card 0, #17 (0,0,0,Headphone Mic Jack,0) VALUE
This is an insert & remove of my headphone jack; ALSA does detect something it seems. It's listed as "Headphone Mic Jack", is this right?
Any hints would be greatly appreciated!
More info:
[~]% cat /etc/modprobe.d/alsa-base.conf
options snd-hda-intel enable=0,1
options snd-hda-intel model=dell-headset-multi,dell-headset-multi
This is required to get this to work in the first place, and always has worked; I tried some other options, to no avail. the enable=0,1 is to disable the HDMI output (disabling this has no effect either).
$ cat /sys/module/snd_hda_intel/parameters/model
dell-headset-multi,dell-headset-multi,(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null), +(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
To verify these options are actually being used
$ id -Gn
martin wheel video audio vboxusers nfs
I'm in the audio group, not sure if this is required, but can't hurt.
[~]# cat /etc/asound.conf
# Use PulseAudio by default
pcm.!default {
type pulse
fallback "sysdefault"
hint {
show on
description "Default ALSA Output (currently PulseAudio Sound Server)"
ctl.!default {
type pulse
fallback "sysdefault"
# vim:set ft=alsaconf:
Nothing special ... pulseaudio is more or less mandatory these days. ~/.asoundrc doesn't exist.
Some misc. info:
$ grep Codec /proc/asound/card*/codec*
Codec: Realtek ALC3661
[~]% lsmod | grep ^snd
snd_usb_audio 135316 0
snd_usbmidi_lib 27484 1 snd_usb_audio
snd_rawmidi 26806 1 snd_usbmidi_lib
snd_seq_device 13132 1 snd_rawmidi
snd_hda_codec_realtek 67127 1
snd_hda_codec_generic 63126 1 snd_hda_codec_realtek
snd_hda_intel 26327 3
snd_hda_controller 26727 1 snd_hda_intel
snd_hda_codec 108552 4 snd_hda_codec_realtek,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
snd_hwdep 17244 2 snd_usb_audio,snd_hda_codec
snd_pcm 88487 4 snd_usb_audio,snd_hda_codec,snd_hda_intel,snd_hda_controller
snd_timer 26614 1 snd_pcm
snd 73436 17 snd_hda_codec_realtek,snd_usb_audio,snd_hwdep,snd_timer,snd_pcm,snd_rawmidi,snd_hda_codec_generic,snd_usbmidi_lib,snd_hda_codec,snd_hda_intel,snd_seq_device
$ lspci -vv
00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 09)
Subsystem: Dell Device 060a
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f0510000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel modules: snd_hda_intel
00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev 04)
Subsystem: Dell Device 060a
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 59
Region 0: Memory at f0514000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.4-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.1 20140903 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Oct 6 08:22:27 CEST 2014
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7259ebb8-c940-4659-a99c-66226a58659c rw quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c2879fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c287a000-0x00000000dceeefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dceef000-0x00000000dcf9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dcf9f000-0x00000000dcffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dcfff000-0x00000000df9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff980000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Dell Inc. XPS13 9333/0GFTRT, BIOS A02 12/11/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x21f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 1 base 00DE000000 mask 7FFE000000 uncachable
[ 0.000000] 2 base 00DD000000 mask 7FFF000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xc287a max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff8800000f0100]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b23000, 0x01b23fff] PGTABLE
[ 0.000000] BRK [0x01b24000, 0x01b24fff] PGTABLE
[ 0.000000] BRK [0x01b25000, 0x01b25fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21f400000-0x21f5fffff]
[ 0.000000] [mem 0x21f400000-0x21f5fffff] page 2M
[ 0.000000] BRK [0x01b26000, 0x01b26fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21c000000-0x21f3fffff]
[ 0.000000] [mem 0x21c000000-0x21f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff]
[ 0.000000] [mem 0x200000000-0x21bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xc2879fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xc27fffff] page 2M
[ 0.000000] [mem 0xc2800000-0xc2879fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x3796a000-0x37cacfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0120 000024 (v02 DELL )
[ 0.000000] ACPI: XSDT 0x00000000DCFFE170 0000BC (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: FACP 0x00000000DCFFB000 00010C (v05 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: DSDT 0x00000000DCFE6000 010557 (v02 DELL HSW-LPT 00000000 INTL 20120711)
[ 0.000000] ACPI: FACS 0x00000000DCF9C000 000040
[ 0.000000] ACPI: ASF! 0x00000000DCFFD000 0000A5 (v32 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: HPET 0x00000000DCFFA000 000038 (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: LPIT 0x00000000DCFF9000 000094 (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: APIC 0x00000000DCFF8000 000098 (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: MCFG 0x00000000DCFF7000 00003C (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: SSDT 0x00000000DCFE5000 000228 (v01 DELL sensrhub 00000000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000DCFE2000 002028 (v01 DELL PtidDevc 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000DCFE1000 000539 (v01 DELL Cpu0Ist 00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000DCFE0000 000AD8 (v01 DELL CpuPm 00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000DCFDC000 003641 (v01 DELL SaSsdt 00003000 INTL 20120711)
[ 0.000000] ACPI: UEFI 0x00000000DCFDB000 000042 (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: POAT 0x00000000DCF77000 000055 (v03 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: BATB 0x00000000DCFDA000 000046 (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: FPDT 0x00000000DCFD9000 000064 (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: SLIC 0x00000000DCFD8000 000176 (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: UEFI 0x00000000DCFD7000 0002A6 (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: SSDT 0x00000000DCFD6000 0005C1 (v01 DELL IsctTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: CSRT 0x00000000DCFD4000 0000C4 (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21f5fffff]
[ 0.000000] NODE_DATA [mem 0x21f5f9000-0x21f5fdfff]
[ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880217200000-ffff88021ebfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x21f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xc2879fff]
[ 0.000000] node 0: [mem 0x100000000-0x21f5fffff]
[ 0.000000] On node 0 totalpages: 1973782
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12386 pages used for memmap
[ 0.000000] DMA32 zone: 792698 pages, LIFO batch:31
[ 0.000000] Normal zone: 18392 pages used for memmap
[ 0.000000] Normal zone: 1177088 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xdda00000-0xdf9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 56
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc287a000-0xdceeefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdceef000-0xdcf9efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdcf9f000-0xdcffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdcfff000-0xdf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfe100fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff97ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff980000-0xffffffff]
[ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88021f200000 s86784 r8192 d23808 u262144
[ 0.000000] pcpu-alloc: s86784 r8192 d23808 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1942919
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7259ebb8-c940-4659-a99c-66226a58659c rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7688084K/7895128K available (5336K kernel code, 887K rwdata, 1688K rodata, 1128K init, 1164K bss, 207044K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:1016 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 31981568 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2394.295 MHz processor
[ 0.000039] Calibrating delay loop (skipped), value calculated using timer frequency.. 4790.11 BogoMIPS (lpj=7980983)
[ 0.000042] pid_max: default: 32768 minimum: 301
[ 0.000050] ACPI: Core revision 20140424
[ 0.020000] ACPI: All ACPI Tables successfully acquired
[ 0.020260] Security Framework initialized
[ 0.020267] Yama: becoming mindful.
[ 0.020937] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.022978] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.023836] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.023849] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.024116] Initializing cgroup subsys memory
[ 0.024140] Initializing cgroup subsys devices
[ 0.024147] Initializing cgroup subsys freezer
[ 0.024150] Initializing cgroup subsys net_cls
[ 0.024155] Initializing cgroup subsys blkio
[ 0.024183] CPU: Physical Processor ID: 0
[ 0.024184] CPU: Processor Core ID: 0
[ 0.024189] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.025376] mce: CPU supports 7 MCE banks
[ 0.025391] CPU0: Thermal monitoring enabled (TM1)
[ 0.025404] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
tlb_flushall_shift: 6
[ 0.025524] Freeing SMP alternatives memory: 20K (ffffffff819f9000 - ffffffff819fe000)
[ 0.026475] ftrace: allocating 20445 entries in 80 pages
[ 0.038058] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.071090] smpboot: CPU0: Intel(R) Core(TM) i7-4500U CPU @ 1.80GHz (fam: 06, model: 45, stepping: 01)
[ 0.071098] TSC deadline timer enabled
[ 0.071124] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.071149] ... version: 3
[ 0.071150] ... bit width: 48
[ 0.071151] ... generic registers: 4
[ 0.071152] ... value mask: 0000ffffffffffff
[ 0.071154] ... max period: 0000ffffffffffff
[ 0.071155] ... fixed-purpose events: 3
[ 0.071156] ... event mask: 000000070000000f
[ 0.097907] x86: Booting SMP configuration:
[ 0.097909] .... node #0, CPUs: #1
[ 0.112630] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.119293] #2 #3
[ 0.154938] x86: Booted up 1 node, 4 CPUs
[ 0.154942] smpboot: Total of 4 processors activated (19162.45 BogoMIPS)
[ 0.160676] devtmpfs: initialized
[ 0.163608] PM: Registering ACPI NVS region [mem 0xdceef000-0xdcf9efff] (720896 bytes)
[ 0.164642] pinctrl core: initialized pinctrl subsystem
[ 0.164688] RTC time: 22:42:27, date: 10/21/14
[ 0.164750] NET: Registered protocol family 16
[ 0.164884] cpuidle: using governor ladder
[ 0.164887] cpuidle: using governor menu
[ 0.164916] ACPI: bus type PCI registered
[ 0.164918] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.165012] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.165014] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.165118] PCI: Using configuration type 1 for base access
[ 0.165125] dmi type 0xB1 record - unknown flag
[ 0.177572] ACPI: Added _OSI(Module Device)
[ 0.177575] ACPI: Added _OSI(Processor Device)
[ 0.177577] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.177578] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.183007] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.194850] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.207326] ACPI: Dynamic OEM Table Load:
[ 0.207339] ACPI: SSDT 0xFFFF880213EE7000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
[ 0.220827] ACPI: Dynamic OEM Table Load:
[ 0.220838] ACPI: SSDT 0xFFFF880213F81000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
[ 0.237345] ACPI: Dynamic OEM Table Load:
[ 0.237354] ACPI: SSDT 0xFFFF880213F56200 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
[ 0.255255] ACPI: Interpreter enabled
[ 0.255267] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[ 0.255275] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.255298] ACPI: (supports S0 S3 S4 S5)
[ 0.255300] ACPI: Using IOAPIC for interrupt routing
[ 0.255336] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.268419] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.268426] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.268573] \_SB_.PCI0:_OSC invalid UUID
[ 0.268575] _OSC request data:1 1f 0
[ 0.268579] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.269580] PCI host bridge to bus 0000:00
[ 0.269584] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.269586] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.269588] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.269590] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.269592] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[ 0.269601] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[ 0.269803] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[ 0.269817] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.269826] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.269831] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.270019] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[ 0.270029] pci 0000:00:03.0: reg 0x10: [mem 0xf0510000-0xf0513fff 64bit]
[ 0.270244] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[ 0.270263] pci 0000:00:14.0: reg 0x10: [mem 0xf0500000-0xf050ffff 64bit]
[ 0.270324] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.270459] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.270505] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[ 0.270526] pci 0000:00:16.0: reg 0x10: [mem 0xf0519000-0xf051901f 64bit]
[ 0.270598] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.270790] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[ 0.270806] pci 0000:00:1b.0: reg 0x10: [mem 0xf0514000-0xf0517fff 64bit]
[ 0.270876] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.271011] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.271060] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
[ 0.271140] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.271279] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.271327] pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400
[ 0.271410] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.271549] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.271602] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[ 0.271624] pci 0000:00:1d.0: reg 0x10: [mem 0xf051d000-0xf051d3ff]
[ 0.271716] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.271867] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.271914] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[ 0.272193] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[ 0.272209] pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f]
[ 0.272217] pci 0000:00:1f.2: reg 0x14: [io 0x3094-0x3097]
[ 0.272225] pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087]
[ 0.272232] pci 0000:00:1f.2: reg 0x1c: [io 0x3090-0x3093]
[ 0.272240] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 0.272247] pci 0000:00:1f.2: reg 0x24: [mem 0xf051c000-0xf051c7ff]
[ 0.272285] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.272451] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[ 0.272466] pci 0000:00:1f.3: reg 0x10: [mem 0xf0518000-0xf05180ff 64bit]
[ 0.272486] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 0.272737] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.272853] pci 0000:02:00.0: [8086:08b1] type 00 class 0x028000
[ 0.272899] pci 0000:02:00.0: reg 0x10: [mem 0xf0400000-0xf0401fff 64bit]
[ 0.273097] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.273145] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.277341] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.277347] pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf04fffff]
[ 0.294607] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.294666] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.294723] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *7
[ 0.294778] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.294832] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.294886] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.294940] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.294995] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.295346] ACPI: Enabled 5 GPEs in block 00 to 7F
[ 0.295416] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
[ 0.295555] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.295559] vgaarb: loaded
[ 0.295560] vgaarb: bridge control possible 0000:00:02.0
[ 0.295603] PCI: Using ACPI for IRQ routing
[ 0.297024] PCI: pci_cache_line_size set to 64 bytes
[ 0.297085] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[ 0.297087] e820: reserve RAM buffer [mem 0xc287a000-0xc3ffffff]
[ 0.297088] e820: reserve RAM buffer [mem 0x21f600000-0x21fffffff]
[ 0.297209] NetLabel: Initializing
[ 0.297211] NetLabel: domain hash size = 128
[ 0.297212] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.297225] NetLabel: unlabeled traffic allowed by default
[ 0.297250] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.297256] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.299294] Switched to clocksource hpet
[ 0.305097] pnp: PnP ACPI init
[ 0.305113] ACPI: bus type PNP registered
[ 0.305253] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.305256] system 00:00: [io 0xffff] has been reserved
[ 0.305259] system 00:00: [io 0xffff] has been reserved
[ 0.305262] system 00:00: [io 0xffff] has been reserved
[ 0.305265] system 00:00: [io 0x1800-0x18fe] could not be reserved
[ 0.305267] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.305270] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.305325] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.305378] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.305381] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.305426] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.305459] pnp 00:04: Plug and Play ACPI device, IDs SYN0608 PNP0f03 (active)
[ 0.305612] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.305614] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.305617] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.305619] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.305621] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.305623] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.305625] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.305627] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.305630] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.305632] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.305634] system 00:05: [mem 0xdfa10000-0xdfa1ffff] has been reserved
[ 0.305637] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.305958] system 00:06: [mem 0xfe102000-0xfe102fff] has been reserved
[ 0.305961] system 00:06: [mem 0xfe104000-0xfe104fff] has been reserved
[ 0.305971] system 00:06: [mem 0xfe106000-0xfe106fff] has been reserved
[ 0.305974] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.306696] pnp: PnP ACPI: found 7 devices
[ 0.306698] ACPI: bus type PNP unregistered
[ 0.313588] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.313602] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.313608] pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf04fffff]
[ 0.313617] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.313620] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.313622] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.313624] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff]
[ 0.313626] pci_bus 0000:02: resource 1 [mem 0xf0400000-0xf04fffff]
[ 0.313661] NET: Registered protocol family 2
[ 0.313895] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.314065] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.314196] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.314216] TCP: reno registered
[ 0.314229] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.314260] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.314329] NET: Registered protocol family 1
[ 0.314345] pci 0000:00:02.0: Boot video device
[ 0.314427] pci 0000:00:14.0: can't derive routing for PCI INT A
[ 0.314429] pci 0000:00:14.0: PCI INT A: no GSI
[ 0.314520] pci 0000:00:14.0: can't derive routing for PCI INT A
[ 0.314702] PCI: CLS 64 bytes, default 64
[ 0.314746] Unpacking initramfs...
[ 0.389760] Freeing initrd memory: 3340K (ffff88003796a000 - ffff880037cad000)
[ 0.389768] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.389771] software IO TLB [mem 0xbe87a000-0xc287a000] (64MB) mapped at [ffff8800be87a000-ffff8800c2879fff]
[ 0.389991] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 0.390043] Scanning for low memory corruption every 60 seconds
[ 0.390383] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.390776] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.392315] zbud: loaded
[ 0.392526] VFS: Disk quotas dquot_6.5.2
[ 0.392564] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.392709] msgmni has been set to 15022
[ 0.392776] Key type big_key registered
[ 0.392952] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.393009] io scheduler noop registered
[ 0.393014] io scheduler deadline registered
[ 0.393072] io scheduler cfq registered (default)
[ 0.393422] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.393440] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.393482] intel_idle: MWAIT substates: 0x11142120
[ 0.393484] intel_idle: v0.4 model 0x45
[ 0.393485] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.393772] GHES: HEST is not enabled!
[ 0.393860] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.394367] Linux agpgart interface v0.103
[ 0.394421] rtc_cmos 00:01: RTC can wake from S4
[ 0.394566] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.394596] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.394611] Intel P-state driver initializing.
[ 0.394625] Intel pstate controlling: cpu 0
[ 0.394647] Intel pstate controlling: cpu 1
[ 0.394663] Intel pstate controlling: cpu 2
[ 0.394684] Intel pstate controlling: cpu 3
[ 0.394756] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.395139] TCP: cubic registered
[ 0.395367] NET: Registered protocol family 10
[ 0.395811] NET: Registered protocol family 17
[ 0.396487] registered taskstats version 1
[ 0.397305] Magic number: 2:622:755
[ 0.397469] rtc_cmos 00:01: setting system clock to 2014-10-21 22:42:27 UTC (1413931347)
[ 0.397659] PM: Hibernation image not present or could not be loaded.
[ 0.399550] Freeing unused kernel memory: 1128K (ffffffff818df000 - ffffffff819f9000)
[ 0.399554] Write protecting the kernel read-only data: 8192k
[ 0.403618] Freeing unused kernel memory: 796K (ffff880001539000 - ffff880001600000)
[ 0.404603] Freeing unused kernel memory: 360K (ffff8800017a6000 - ffff880001800000)
[ 0.411279] random: systemd-tmpfile urandom read with 4 bits of entropy available
[ 0.412549] systemd-udevd[57]: starting version 216
[ 0.429661] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.430313] sdhci: Secure Digital Host Controller Interface driver
[ 0.430315] sdhci: Copyright(c) Pierre Ossman
[ 0.435942] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.436007] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.441502] ACPI: bus type USB registered
[ 0.441544] usbcore: registered new interface driver usbfs
[ 0.441562] usbcore: registered new interface driver hub
[ 0.441712] usbcore: registered new device driver usb
[ 0.442370] SCSI subsystem initialized
[ 0.442606] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.442897] ehci-pci: EHCI PCI platform driver
[ 0.443091] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.443106] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 0.443121] ehci-pci 0000:00:1d.0: debug port 2
[ 0.444256] libata version 3.00 loaded.
[ 0.447021] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.447046] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf051d000
[ 0.456197] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.456468] hub 1-0:1.0: USB hub found
[ 0.456636] hub 1-0:1.0: 2 ports detected
[ 0.456998] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[ 0.457003] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
[ 0.457028] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.457038] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.457132] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.457158] xhci_hcd 0000:00:14.0: irq 56 for MSI/MSI-X
[ 0.457437] hub 2-0:1.0: USB hub found
[ 0.457454] hub 2-0:1.0: 9 ports detected
[ 0.460686] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.460692] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.460861] hub 3-0:1.0: USB hub found
[ 0.460871] hub 3-0:1.0: 4 ports detected
[ 0.461773] ahci 0000:00:1f.2: version 3.0
[ 0.461915] ahci 0000:00:1f.2: irq 57 for MSI/MSI-X
[ 0.471676] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.472802] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x4 impl SATA mode
[ 0.472807] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 0.473307] scsi0 : ahci
[ 0.473445] scsi1 : ahci
[ 0.473555] scsi2 : ahci
[ 0.473668] scsi3 : ahci
[ 0.473715] ata1: DUMMY
[ 0.473717] ata2: DUMMY
[ 0.473719] ata3: SATA max UDMA/133 abar m2048@0xf051c000 port 0xf051c200 irq 57
[ 0.473721] ata4: DUMMY
[ 0.763125] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.793107] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.793458] ata3.00: ATA-8: LITEONIT LMT-256M6M mSATA 256GB, DM8110F, max UDMA/133
[ 0.793461] ata3.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 0.794069] ata3.00: configured for UDMA/133
[ 0.794234] scsi 2:0:0:0: Direct-Access ATA LITEONIT LMT-256 10F PQ: 0 ANSI: 5
[ 0.798767] sd 2:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 0.798902] sd 2:0:0:0: [sda] Write Protect is off
[ 0.798906] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.798943] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.799393] sda: sda3 sda4
[ 0.799749] sd 2:0:0:0: [sda] Attached SCSI disk
[ 0.841216] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 0.887143] hub 1-1:1.0: USB hub found
[ 0.887202] hub 1-1:1.0: 8 ports detected
[ 0.946321] systemd[1]: Cannot add dependency job for unit nfs-server.target, ignoring: Unit nfs-server.target failed to load: No such file or directory.
[ 0.946348] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 0.960139] EXT4-fs (sda4): re-mounted. Opts: data=ordered,discard
[ 0.981520] FS-Cache: Loaded
[ 0.992070] RPC: Registered named UNIX socket transport module.
[ 0.992075] RPC: Registered udp transport module.
[ 0.992077] RPC: Registered tcp transport module.
[ 0.992079] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.004660] FS-Cache: Netfs 'nfs' registered for caching
[ 1.007058] Netfilter messages via NETLINK v0.30.
[ 1.008839] nf_tables: (c) 2007-2009 Patrick McHardy <[email protected]>
[ 1.023856] vboxdrv: Found 4 processor cores.
[ 1.024080] vboxdrv: fAsync=0 offMin=0x2c2 offMax=0x31e0
[ 1.024169] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 1.024172] vboxdrv: Successfully loaded version 4.3.18_OSE (interface 0x001a0008).
[ 1.046603] usb 2-3: new full-speed USB device number 2 using xhci_hcd
[ 1.322293] systemd-udevd[170]: starting version 216
[ 1.380209] usb 2-5: new high-speed USB device number 3 using xhci_hcd
[ 1.393592] tsc: Refined TSC clocksource calibration: 2394.460 MHz
[ 1.439202] systemd-journald[135]: Received request to flush runtime journal from PID 1
[ 1.471000] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.476250] systemd-journald[135]: File /var/log/journal/88482a6e208046b4ab2b978eaa052ecd/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 1.510556] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.510560] ACPI: Thermal Zone [TZ00] (28 C)
[ 1.510856] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.510860] ACPI: Thermal Zone [TZ01] (30 C)
[ 1.516235] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.526161] ACPI Warning: SystemIO range 0x000000000000efa0-0x000000000000efbf conflicts with OpRegion 0x000000000000efa0-0x000000000000efaf (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
[ 1.526172] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.545038] mei_me 0000:00:16.0: irq 58 for MSI/MSI-X
[ 1.552395] cfg80211: Calling CRDA to update world regulatory domain
[ 1.576090] [drm] Initialized drm 1.1.0 20060810
[ 1.580291] random: nonblocking pool is initialized
[ 1.596486] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 1.596490] Copyright(c) 2003- 2014 Intel Corporation
[ 1.596517] snd_hda_intel: probe of 0000:00:03.0 failed with error -2
[ 1.596724] snd_hda_intel 0000:00:1b.0: irq 59 for MSI/MSI-X
[ 1.597671] iwlwifi 0000:02:00.0: irq 60 for MSI/MSI-X
[ 1.606282] iwlwifi 0000:02:00.0: loaded firmware version 23.214.9.0 op_mode iwlmvm
[ 1.622623] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 1.622630] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 1.622633] sound hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 1.622636] sound hdaudioC0D0: mono: mono_out=0x0
[ 1.622639] sound hdaudioC0D0: inputs:
[ 1.622643] sound hdaudioC0D0: Headphone Mic=0x19
[ 1.622646] sound hdaudioC0D0: Headset Mic=0x1b
[ 1.622649] sound hdaudioC0D0: Internal Mic=0x12
[ 1.627117] ACPI: AC Adapter [ADP0] (off-line)
[ 1.628753] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 1.628924] ACPI: Power Button [PWRB]
[ 1.629010] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
[ 1.630785] ACPI: Lid Switch [LID0]
[ 1.630887] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 1.631327] ACPI: Power Button [PWRF]
[ 1.633943] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input3
[ 1.634197] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 1.635366] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x16
[ 1.635406] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x16
[ 1.635428] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x16
[ 1.635449] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x16
[ 1.635520] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 1.639579] ACPI: Battery Slot [BAT0] (battery present)
[ 1.640267] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
[ 1.640997] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 1.641000] wmi: Mapper loaded
[ 1.641249] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 1.644274] AVX2 version of gcm_enc/dec engaged.
[ 1.662640] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 1.707814] iTCO_vendor_support: vendor-support=0
[ 1.709016] [drm] Memory usable by graphics device = 2048M
[ 1.709022] [drm] Replacing VGA console driver
[ 1.710234] Console: switching to colour dummy device 80x25
[ 1.710749] hid-rmi 0018:06CB:2734.0001: Scanning PDT...
[ 1.711895] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 1.711954] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
[ 1.712089] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 1.713279] hid-rmi 0018:06CB:2734.0001: Found F34 on page 0x00
[ 1.715870] hid-rmi 0018:06CB:2734.0001: Found F01 on page 0x00
[ 1.718203] hid-rmi 0018:06CB:2734.0001: Found F11 on page 0x00
[ 1.724578] hid-rmi 0018:06CB:2734.0001: Found F54 on page 0x01
[ 1.727275] hid-rmi 0018:06CB:2734.0001: Found F30 on page 0x01
[ 1.730545] i915 0000:00:02.0: irq 61 for MSI/MSI-X
[ 1.730561] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.730563] [drm] Driver supports precise vblank timestamp query.
[ 1.730596] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.733539] hid-rmi 0018:06CB:2734.0001: Found F55 on page 0x02
[ 1.738729] hid-rmi 0018:06CB:2734.0001: Found F51 on page 0x03
[ 1.740512] usb 2-6: new full-speed USB device number 4 using xhci_hcd
[ 1.744701] hid-rmi 0018:06CB:2734.0001: rmi_scan_pdt: Done with PDT scan.
[ 1.756260] [drm] VBT doesn't support DRRS
[ 1.758240] hid-rmi 0018:06CB:2734.0001: rmi_populate_f11: size in mm: 97 x 59
[ 1.766636] input: DLL060A:00 06CB:2734 as /devices/pci0000:00/INT33C3:00/i2c-0/i2c-DLL060A:00/0018:06CB:2734.0001/input/input8
[ 1.766734] hid-rmi 0018:06CB:2734.0001: input,hidraw0: <UNKNOWN> HID v1.00 Pointer [DLL060A:00 06CB:2734] on
[ 1.775456] fbcon: inteldrmfb (fb0) is primary device
[ 1.802968] input: Dell WMI hotkeys as /devices/virtual/input/input9
[ 1.808667] mousedev: PS/2 mouse device common for all mice
[ 1.841252] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 1.842535] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 1.842776] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 1.854793] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2.394398] Switched to clocksource tsc
[ 2.838140] Console: switching to colour frame buffer device 240x67
[ 2.845934] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.845936] i915 0000:00:02.0: registered panic notifier
[ 2.876371] media: Linux media interface: v0.10
[ 2.876864] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.877001] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[ 2.877148] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.879690] usbcore: registered new interface driver usbhid
[ 2.879694] usbhid: USB HID core driver
[ 2.883145] Linux video capture interface: v2.00
[ 2.892232] input: SYNAPTICS Synaptics Large Touch Screen as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0/0003:06CB:0AF8.0002/input/input11
[ 2.892497] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0bda:5752)
[ 2.895106] hid-multitouch 0003:06CB:0AF8.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [SYNAPTICS Synaptics Large Touch Screen] on usb-0000:00:14.0-3/input0
[ 2.895830] Bluetooth: Core ver 2.19
[ 2.895849] NET: Registered protocol family 31
[ 2.895852] Bluetooth: HCI device and connection manager initialized
[ 2.895861] Bluetooth: HCI socket layer initialized
[ 2.895864] Bluetooth: L2CAP socket layer initialized
[ 2.895877] Bluetooth: SCO socket layer initialized
[ 2.901636] input: Integrated_Webcam_HD as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input13
[ 2.901827] usbcore: registered new interface driver uvcvideo
[ 2.901830] USB Video Class driver (1.1.1)
[ 2.910511] usbcore: registered new interface driver btusb
[ 2.925460] Bluetooth: hci0: read Intel version: 370710018002030d2e
[ 2.925464] Bluetooth: hci0: Intel device is already patched. patch num: 2e
[ 3.331899] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 11.275262] systemd-journald[135]: File /var/log/journal/88482a6e208046b4ab2b978eaa052ecd/user-1001.journal corrupted or uncleanly shut down, renaming and replacing.
[ 35.164461] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 35.241753] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 35.241999] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 35.255097] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 36.055112] wlan0: authenticate with c0:25:06:84:57:f0
[ 36.058891] wlan0: send auth to c0:25:06:84:57:f0 (try 1/3)
[ 36.061335] wlan0: authenticated
[ 36.061563] wlan0: associate with c0:25:06:84:57:f0 (try 1/3)
[ 36.067260] wlan0: RX AssocResp from c0:25:06:84:57:f0 (capab=0x431 status=0 aid=1)
[ 36.070080] wlan0: associated
[ 36.070111] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 36.070172] cfg80211: Calling CRDA to update world regulatory domain
[ 4501.338278] PM: Syncing filesystems ...
[ 4501.341188] atkbd serio0: Unknown key pressed (translated set 2, code 0xf2 on isa0060/serio0).
[ 4501.341196] atkbd serio0: Use 'setkeycodes e072 <keycode>' to make it known.
[ 4501.348617] done.
[ 4501.348622] PM: Preparing system for mem sleep
[ 4501.349019] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 4501.350459] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 4501.351580] PM: Entering mem sleep
[ 4501.351657] Suspending console(s) (use no_console_suspend to debug)
[ 4501.351917] wlan0: deauthenticating from c0:25:06:84:57:f0 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 4501.358219] atkbd serio0: Unknown key released (translated set 2, code 0xf2 on isa0060/serio0).
[ 4501.358222] atkbd serio0: Use 'setkeycodes e072 <keycode>' to make it known.
[ 4501.361609] cfg80211: Calling CRDA for country: DE
[ 4501.362122] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 4501.362185] sd 2:0:0:0: [sda] Stopping disk
[ 4501.992409] PM: suspend of devices complete after 640.028 msecs
[ 4502.005724] PM: late suspend of devices complete after 13.299 msecs
[ 4502.006247] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 4502.006367] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 4502.019376] PM: noirq suspend of devices complete after 13.638 msecs
[ 4502.019816] ACPI: Preparing to enter system sleep state S3
[ 4502.020586] PM: Saving platform NVS memory
[ 4502.021109] Disabling non-boot CPUs ...
[ 4502.021139] intel_pstate CPU 1 exiting
[ 4502.022404] kvm: disabling virtualization on CPU1
[ 4502.022854] smpboot: CPU 1 is now offline
[ 4502.023143] intel_pstate CPU 2 exiting
[ 4502.024386] kvm: disabling virtualization on CPU2
[ 4502.125774] smpboot: CPU 2 is now offline
[ 4502.126039] intel_pstate CPU 3 exiting
[ 4502.127395] kvm: disabling virtualization on CPU3
[ 4502.229207] smpboot: CPU 3 is now offline
[ 4502.232189] ACPI: Low-level resume complete
[ 4502.232259] PM: Restoring platform NVS memory
[ 4502.232774] Enabling non-boot CPUs ...
[ 4502.232814] x86: Booting SMP configuration:
[ 4502.232815] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 4502.245238] kvm: enabling virtualization on CPU1
[ 4502.247462] Intel pstate controlling: cpu 1
[ 4502.247514] CPU1 is up
[ 4502.247533] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 4502.259870] kvm: enabling virtualization on CPU2
[ 4502.262107] Intel pstate controlling: cpu 2
[ 4502.262155] CPU2 is up
[ 4502.262172] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 4502.274504] kvm: enabling virtualization on CPU3
[ 4502.276760] Intel pstate controlling: cpu 3
[ 4502.276807] CPU3 is up
[ 4502.282141] ACPI: Waking up from system sleep state S3
[ 4502.302447] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 4502.302450] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 4502.302690] PM: noirq resume of devices complete after 11.863 msecs
[ 4502.303102] PM: early resume of devices complete after 0.384 msecs
[ 4502.303194] usb usb2: root hub lost power or was reset
[ 4502.303197] usb usb3: root hub lost power or was reset
[ 4502.315679] mei_me 0000:00:16.0: irq 58 for MSI/MSI-X
[ 4502.315810] snd_hda_intel 0000:00:1b.0: irq 59 for MSI/MSI-X
[ 4502.329054] sd 2:0:0:0: [sda] Starting disk
[ 4502.390642] xhci_hcd 0000:00:14.0: irq 56 for MSI/MSI-X
[ 4502.535888] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 4502.643402] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 4502.643646] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 4502.649288] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4502.652119] ata3.00: configured for UDMA/133
[ 4502.766135] usb 2-3: reset full-speed USB device number 2 using xhci_hcd
[ 4502.939946] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212c09480
[ 4502.939950] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212c094c8
[ 4503.099825] usb 2-6: reset full-speed USB device number 4 using xhci_hcd
[ 4503.273741] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bdea5a00
[ 4503.273745] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bdea5a48
[ 4503.273748] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bdea5a90
[ 4503.273750] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88020c2a6000
[ 4503.273752] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88020c2a6048
[ 4503.274732] PM: resume of devices complete after 970.836 msecs
[ 4503.275664] PM: Finishing wakeup.
[ 4503.275668] Restarting tasks ...
[ 4503.275774] iwlwifi 0000:02:00.0: no hotplug settings from platform
[ 4503.276362] usb 2-5: USB disconnect, device number 3
[ 4503.276546] pci_bus 0000:01: Allocating resources
[ 4503.276576] pcieport 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 4503.276585] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[ 4503.276592] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
[ 4503.276596] done.
[ 4503.276614] pci_bus 0000:02: Allocating resources
[ 4503.276646] pcieport 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 4503.276653] pcieport 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 4503.276662] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 4503.276675] pcieport 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 4503.276681] pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 4503.276688] pcieport 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 4503.276695] pcieport 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 4503.276701] pcieport 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 4503.276712] pcieport 0000:00:1c.0: BAR 14: assigned [mem 0xdfb00000-0xdfcfffff]
[ 4503.276726] pcieport 0000:00:1c.0: BAR 15: assigned [mem 0xdfd00000-0xdfefffff 64bit pref]
[ 4503.276739] pcieport 0000:00:1c.2: BAR 15: assigned [mem 0xf0600000-0xf07fffff 64bit pref]
[ 4503.276748] pcieport 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 4503.276756] pcieport 0000:00:1c.2: BAR 13: assigned [io 0x4000-0x4fff]
[ 4503.276773] pci 0000:00:00.0: no hotplug settings from platform
[ 4503.276778] pci 0000:00:00.0: using default PCI settings
[ 4503.276791] i915 0000:00:02.0: no hotplug settings from platform
[ 4503.276795] i915 0000:00:02.0: using default PCI settings
[ 4503.276809] pci 0000:00:03.0: no hotplug settings from platform
[ 4503.276816] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[ 4503.276820] xhci_hcd 0000:00:14.0: using default PCI settings
[ 4503.276836] mei_me 0000:00:16.0: no hotplug settings from platform
[ 4503.276839] mei_me 0000:00:16.0: using default PCI settings
[ 4503.276855] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[ 4503.276863] pcieport 0000:00:1c.0: no hotplug settings from platform
[ 4503.276871] pcieport 0000:00:1c.2: no hotplug settings from platform
[ 4503.276904] iwlwifi 0000:02:00.0: no hotplug settings from platform
[ 4503.276912] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[ 4503.276917] ehci-pci 0000:00:1d.0: using default PCI settings
[ 4503.276933] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[ 4503.276938] lpc_ich 0000:00:1f.0: using default PCI settings
[ 4503.276956] ahci 0000:00:1f.2: no hotplug settings from platform
[ 4503.276961] ahci 0000:00:1f.2: using default PCI settings
[ 4503.276976] pci 0000:00:1f.3: no hotplug settings from platform
[ 4503.276980] pci 0000:00:1f.3: using default PCI settings
[ 4503.277590] pci_bus 0000:01: Allocating resources
[ 4503.277619] pci_bus 0000:02: Allocating resources
[ 4503.277652] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 4503.277669] pci 0000:00:00.0: no hotplug settings from platform
[ 4503.277673] pci 0000:00:00.0: using default PCI settings
[ 4503.277686] i915 0000:00:02.0: no hotplug settings from platform
[ 4503.277690] i915 0000:00:02.0: using default PCI settings
[ 4503.277703] pci 0000:00:03.0: no hotplug settings from platform
[ 4503.277711] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[ 4503.277716] xhci_hcd 0000:00:14.0: using default PCI settings
[ 4503.277731] mei_me 0000:00:16.0: no hotplug settings from platform
[ 4503.277736] mei_me 0000:00:16.0: using default PCI settings
[ 4503.277751] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[ 4503.277759] pcieport 0000:00:1c.0: no hotplug settings from platform
[ 4503.277767] pcieport 0000:00:1c.2: no hotplug settings from platform
[ 4503.277801] iwlwifi 0000:02:00.0: no hotplug settings from platform
[ 4503.277809] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[ 4503.277814] ehci-pci 0000:00:1d.0: using default PCI settings
[ 4503.277830] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[ 4503.277835] lpc_ich 0000:00:1f.0: using default PCI settings
[ 4503.277852] ahci 0000:00:1f.2: no hotplug settings from platform
[ 4503.277857] ahci 0000:00:1f.2: using default PCI settings
[ 4503.277871] pci 0000:00:1f.3: no hotplug settings from platform
[ 4503.277875] pci 0000:00:1f.3: using default PCI settings
[ 4503.287972] Bluetooth: hci0: read Intel version: 370710018002030d00
[ 4503.551878] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[ 4503.596787] usb 2-5: new high-speed USB device number 5 using xhci_hcd
[ 4503.633858] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4503.755400] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[ 4503.797807] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0bda:5752)
[ 4503.801045] input: Integrated_Webcam_HD as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input16
[ 4503.943676] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 4506.058296] dell_wmi: Unknown key e00e pressed
[ 4507.048423] wlan0: authenticate with c0:25:06:84:57:f0
[ 4507.051164] wlan0: send auth to c0:25:06:84:57:f0 (try 1/3)
[ 4507.053766] wlan0: authenticated
[ 4507.056205] wlan0: associate with c0:25:06:84:57:f0 (try 1/3)
[ 4507.062403] wlan0: RX AssocResp from c0:25:06:84:57:f0 (capab=0x431 status=0 aid=1)
[ 4507.065241] wlan0: associated
[ 4507.065268] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 4812.948936] usb 2-2: new high-speed USB device number 6 using xhci_hcd
[ 4813.124097] hub 2-2:1.0: USB hub found
[ 4813.124371] hub 2-2:1.0: 4 ports detected
[ 4813.392831] usb 2-2.2: new full-speed USB device number 7 using xhci_hcd
[ 4813.477901] usb 2-2.2: ep 0x85 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 4813.495517] input: Burr-Brown from TI USB Audio CODEC as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.2/2-2.2:1.3/0003:08BB:2902.0003/input/input17
[ 4813.495657] hid-generic 0003:08BB:2902.0003: input,hidraw2: USB HID v1.00 Device [Burr-Brown from TI USB Audio CODEC ] on usb-0000:00:14.0-2.2/input3
[ 4813.515300] usbcore: registered new interface driver snd-usb-audio
[ 4813.546263] usb 2-2.3: new full-speed USB device number 8 using xhci_hcd
[ 4813.648070] logitech-djreceiver 0003:046D:C52B.0006: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2.3/input2
[ 4813.699821] usb 2-2.4: new high-speed USB device number 9 using xhci_hcd
[ 4813.700997] input: Logitech Unifying Device. Wireless PID:1028 as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.3/2-2.3:1.2/0003:046D:C52B.0006/0003:046D:C52B.0007/input/input18
[ 4813.701200] logitech-djdevice 0003:046D:C52B.0007: input,hidraw4: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1028] on usb-0000:00:14.0-2.3:1
[ 4814.121899] ax88179_178a 2-2.4:1.0 eth0: register 'ax88179_178a' at usb-0000:00:14.0-2.4, ASIX AX88179 USB 3.0 Gigabit Ethernet, 00:24:9b:0a:27:f6
[ 4814.121931] usbcore: registered new interface driver ax88179_178a
[ 4814.442429] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4817.483762] ax88179_178a 2-2.4:1.0 eth0: ax88179 - Link status is: 1
[ 4817.485665] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 6509.605763] usb 2-2: USB disconnect, device number 6
[ 6509.605773] usb 2-2.2: USB disconnect, device number 7
[ 6509.660447] usb 2-2.3: USB disconnect, device number 8
[ 6509.692281] usb 2-2.4: USB disconnect, device number 9
[ 6509.692540] ax88179_178a 2-2.4:1.0 eth0: unregister 'ax88179_178a' usb-0000:00:14.0-2.4, ASIX AX88179 USB 3.0 Gigabit Ethernet
[ 6509.692573] ax88179_178a 2-2.4:1.0 eth0: Failed to read reg index 0x0002: -19
[ 6509.692584] ax88179_178a 2-2.4:1.0 eth0: Failed to write reg index 0x0002: -19
[ 6509.721655] ax88179_178a 2-2.4:1.0 (unregistered net_device): Failed to write reg index 0x0002: -19
[ 6509.721669] ax88179_178a 2-2.4:1.0 (unregistered net_device): Failed to write reg index 0x0001: -19
[ 6509.721678] ax88179_178a 2-2.4:1.0 (unregistered net_device): Failed to write reg index 0x0002: -19
[ 6511.071805] PM: Syncing filesystems ...
[ 6511.077462] atkbd serio0: Unknown key pressed (translated set 2, code 0xf2 on isa0060/serio0).
[ 6511.077473] atkbd serio0: Use 'setkeycodes e072 <keycode>' to make it known.
[ 6511.085453] atkbd serio0: Unknown key released (translated set 2, code 0xf2 on isa0060/serio0).
[ 6511.085464] atkbd serio0: Use 'setkeycodes e072 <keycode>' to make it known.
[ 6511.087129] done.
[ 6511.087139] PM: Preparing system for mem sleep
[ 6511.087676] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 6511.089183] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 6511.090294] PM: Entering mem sleep
[ 6511.090393] Suspending console(s) (use no_console_suspend to debug)
[ 6511.090786] wlan0: deauthenticating from c0:25:06:84:57:f0 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 6511.100925] cfg80211: Calling CRDA to update world regulatory domain
[ 6511.101532] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 6511.101598] sd 2:0:0:0: [sda] Stopping disk
[ 6511.720807] PM: suspend of devices complete after 629.628 msecs
[ 6511.734165] PM: late suspend of devices complete after 13.343 msecs
[ 6511.734991] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 6511.735113] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 6511.747808] PM: noirq suspend of devices complete after 13.629 msecs
[ 6511.748271] ACPI: Preparing to enter system sleep state S3
[ 6511.749033] PM: Saving platform NVS memory
[ 6511.749584] Disabling non-boot CPUs ...
[ 6511.749628] intel_pstate CPU 1 exiting
[ 6511.751130] kvm: disabling virtualization on CPU1
[ 6511.752157] smpboot: CPU 1 is now offline
[ 6511.752650] intel_pstate CPU 2 exiting
[ 6511.754091] kvm: disabling virtualization on CPU2
[ 6511.754112] smpboot: CPU 2 is now offline
[ 6511.755147] intel_pstate CPU 3 exiting
[ 6511.756491] kvm: disabling virtualization on CPU3
[ 6511.857520] smpboot: CPU 3 is now offline
[ 6511.860099] ACPI: Low-level resume complete
[ 6511.860168] PM: Restoring platform NVS memory
[ 6511.860682] Enabling non-boot CPUs ...
[ 6511.860725] x86: Booting SMP configuration:
[ 6511.860726] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 6511.873161] kvm: enabling virtualization on CPU1
[ 6511.875384] Intel pstate controlling: cpu 1
[ 6511.875441] CPU1 is up
[ 6511.875462] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 6511.887813] kvm: enabling virtualization on CPU2
[ 6511.890055] Intel pstate controlling: cpu 2
[ 6511.890104] CPU2 is up
[ 6511.890121] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 6511.902450] kvm: enabling virtualization on CPU3
[ 6511.904715] Intel pstate controlling: cpu 3
[ 6511.904763] CPU3 is up
[ 6511.910077] ACPI: Waking up from system sleep state S3
[ 6511.930462] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 6511.930469] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 6511.930713] PM: noirq resume of devices complete after 11.834 msecs
[ 6511.931215] PM: early resume of devices complete after 0.474 msecs
[ 6511.931290] mei_me 0000:00:16.0: irq 58 for MSI/MSI-X
[ 6511.931308] usb usb2: root hub lost power or was reset
[ 6511.931310] usb usb3: root hub lost power or was reset
[ 6511.932049] snd_hda_intel 0000:00:1b.0: irq 59 for MSI/MSI-X
[ 6512.019117] xhci_hcd 0000:00:14.0: irq 56 for MSI/MSI-X
[ 6512.030458] sd 2:0:0:0: [sda] Starting disk
[ 6512.143743] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 6512.143995] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 6512.237297] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 6512.350707] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 6512.353607] ata3.0Update: I mucked about more after making this post; I installed gnome-alsa-mixer and checked the "internal mic" option and "Auto-Mute mode" (both were off), after this my headphone output works again, and does the built-in microphone (!)
I have no idea how I ended up in this "broken" situation, or even what this option does, or how to use it without gnome-alsa-mixer (I had to install 15 packages to get this, as I normally don't use gnome)... Sound on Linux still seems no better than when I started using it 15 years ago :-( (I spent about 5 hours on this...) -
i have the 2.5GHz i5 macbook pro that came out in june of 2012, i updated to OSX version 10.8.1 and now i am unable to change the 3.5mm headphone output into an input.
i have the 2.5GHz i5 macbook pro that came out in june of 2012, i updated to OSX version 10.8.1 and now i am unable to change the 3.5mm headphone output into an input.
-
Headphone output not working on Audigy 2 ZS Platinum Pro
I've installed the (only available) beta driver for Vista under Vista RTM, but can't get the headphone output to work at all...
Sound keeps playing through the line out, but no matter what i do i can't get it routed through the headphone output. Is it a known issue or is there a solution?
(Oh, and for all the forum nazis - i DID try searching for a solution before posting and haven't found a single shred of useful information)
Regards and thanks in advance,
Ante VukorepaI can understand your problem cause i have the same one, and its very annoying.....
my equipment is:
Sound Drivers 2.2.000 (BETA) latest from creative.
Windows Vista Home Premium.
SoundBlaster Audigy / Platnum.
Sound system are Cambridge Soundworks with Sub 5..
Im trying my TECHNIKA TA-05 headphones i brought from tesco's rofl, and when i plug them into my jack BOOM, no sound, unplug and tada sound.
If anyone has a solution that would be great!!!.
Cheers! and have a good valentines. -
HP Presario 700C headphone output not working!
Hello,
I installed Windows XP on my HP Presario 700c laptop, working perfectly.
the only thing that isn't working is the headphone output on the laptop....
When i plugin my headphone i do not get any sound, the sound still goes to the laptop speakers.
What could this be? I tried installing a new driver through driver detective but also doesn't work..
P/N = GR582EA#ABH
Thank you in advance!Hi @Presario700C ,
Welcome to the HP Forums!
It is a terrific place to find answers.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that you are having an issue with connecting your headphones. Have you done all your Windows updates?
Have you ran the HP Support Assistant to aid with HP update?
Here is a link to Troubleshooting Audio Problems with External Speakers, Headphones, and HDMI Sound Devices
to guide you through some troubleshooting .
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping! -
Soundcard output noise interference from headphone output
Hi,
I am getting some output noise from headphone output when AC power supply is connected.
Does not occur when running on battery only.
Need to clear this up as am using for DJ work.
Any ideas appreciated.Drivers, filter?...?i've had this problem for a couple of years now and a guy i know also has had this problem but for even longer and i am delighted to tell you that i've figured it out!!
my laptop was plugged in to a multiplug adaptor (just a standard extension) along with other things like my monitor and my amp etc., but also my tv. it has been faulty recently and i've had it unplugged for the past 24 hours to see if would make a difference. during these 24 hours i hadn't noticed that the sound had stopped, untill that is, i plugged the tv back in! it's simply due to one of the other devices. try the laptop direct into the socket or at least on it's own in the extesion.
hope this works for you too!
pete harbottle -
Override mac mini headphone output
Hey,
I was wondering if it is possible to override the audio headphone output, so the internal speaker will play instead ? or, if the headphones are pluggin for the internal speaker to play as well.
Thanks for your time !
PaulMy thoughts as well. The only work around I could see was to have extra hardware for the sound output via USB.
_The back story_
The reason I ask, as I suddenly had a strange circumstances, where I had to get a message to my girlfriend - at home, who's phone battery had gone flat. I was at work, so jumping into my shared screen mac mini, thinking I could play some music as a attention grabber, while displaying textedit message of "PHONE ME". But realizing that the mac mini was plugged into a TV on standby. I had to resort to restarting the mac mini constantly, to get a chime out. Obviously my girlfriend just thought that something was wrong with the mac, and ignored it. That is why I needed it. A one in a million occurrence.
Since it has / must be a software issue, someone at apple must know the solution. Still this is on the list of "would be nice" .. but no where close to being on the "must have" list.
Best,
Paul -
IMac 27 - very poor quality audio when using analogue headphone output
Hi,
I've had my iMac 27 (i7 quad core, early 2010, OS X 10.6.4), hooked up to my hi-fi via the headphone output jack (analogue) since i bought the machine a few months ago, and its worked fine. However, the audio quality has suddenly deteriorated. The volume is very low, meaning that I can only hear anything if I turn up my hi-fi volume all the way, and then the sound is distorted (as you'd probably expect). Turning up the volume on say, iTunes, whist playing a track, combined with turning up the iMac's output volume does cause an increase in overall volume, but it only makes the difference between totally inaudible and very quiet! Its as if there is some internal output- level setting within the iMac that has 'stuck' at a very low setting!
Troubleshooting actions carried out so far:
Removing the audio cable from the iMac's headphone socket allows the Imac to play via its own internal speakers, and this works fine! (The sound is good, volume is decent, no distortion). So, its just the headphone audio that is affected!
I've verified the sound settings in system preferences. They look fine.
I've performed several soft and hard reboots (with up to 24-hours separating power-off/power-on cycles), but to no avail.
I've booted into Windows XP (bootcamp) and the same audio problem persists (so its not the O/S that's causing the issue).
I've checked the cable and my hi-fi by removing the 3.5mm terminating plug from the imac and sticking into my mp3 player's headphone jack. All works fine. I then inserted the 3.5mm plug plug into my laptop's headphone jack. Again, perfect sound reproduction through my hi-fi. I then returned the plug to the imac's headphone socket and the audio problem re-surfaced, so its definitely the imac that is at fault.
I've ran the extended hardware tests too - no faults found.
I reckon its a hardware fault, but just wondered if anyone else had experienced the same problems?
Incidentally, my Imac is well within its 12-month warranty, but the complimentary 90-day Applecare cover has expired. Looks as if I'm going to have to make an appointment with a 'Genius', but I didn't want to go through the hassle of transporting the system unless necessary. Thankfully, I've had none of the other widely reported quality issues, and apart from this audio problem the machine has performed flawlessly.
Kind regards.I have 30 new imacs running Snow Leopard. They replace 30 emacs that were running panther. I have 30 headsets (labtech) that worked beautifully with my emacs. Used them so my kids could create imovie projects using imovie 6. Well all that has changed with my new imacs. I went to use imovie 9 today and what a disaster. NONE of the headsets would work as they had on the emacs. The kids had to wiggle the plugs and that would sometimes create sound out of one channel, no channels, or would create a crackling sound. Worse than that is that it would give the kids the spinning beach ball. They would unplug the headsets and after about 1 minute imovie would return to normal. I took some of the headsets and tried them out on an emac I have in the room and they all work. I tried them on my macbook pro and they all work. So, it is not wiring or a plug. The sound prefs are setup correctly. Any suggestions? Has anyone else experienced this problem? Here I have new imacs which will allow more sophisticated projects with the iLife apps, but can't use them due to inoperable headsets. I have tried three different brands of headsets and 2 of them will not work at all. These were brand new imacs - right out of the box, and brand new headsets. This is very frustrating to me and the students.
Any help would be appreciated. How can apple not design a fully functioning headphone jack as they have in the past? -
Dual headphone outputs... can they be split into 2 separate outputs?
I just got a DV6-1214AX and want to use it for DJing and would like to be able to separate the dual headphone outputs so that they are 2 separate outputs (1 for headphone monitoring and cueing etc, the other for the main sound output) is this possible?
If not, any suggestions on the best way to do what I'm after without needing to utilise the digital output for the main sound output??
Any tips would be much appreciated.Thank you...I have been sitting here all morning working on it again and realized there was a way to do it manually that didn't require dragging and dropping the tabs....which it will not do. Yikes! Thank you for your response.
Now I have realized there is a problem with the word doc in another field. The spacing for a telephone number is wrong. Is there anyway to change it in the form or do I have to go back to the word doc, fix it, then re-import it? My desire to not do this is because I have to take it back to the original word doc and then when I re-import it, it obviously won't have all these changes I have just made.
Deb
Maybe you are looking for
-
Human Task JSPs not deploying on SOA 10.1.3.1 production
Hi All, I am trying to use a custom JSP for a Human Task on SOA Suite 10.1.3.1 & JDev 10.1.3.1. It seems that the JSPs are not being deployed, or they are being deployed in the wrong place. The error I get in the Worklist application, when I try to v
-
AR Invoice and Incoming Payments
Hi, What link AR Invoice to Incoming Payments (Table/fileds)? I have try to explorer but not record found, anybody can help me please? please advise Thanks, Ben Edited by: Ben Rahman on Apr 11, 2008 6:39 AM
-
How can i open old flash files in MX
I'm trying to open some old flash files that were created in the late 80's (honest). i have flash MX but it won't open or import these files. when i get info on the files, they want to be opened in flash 8 but that won't launch without classic (which
-
When I got my new MBP a few days ago, one of the first things it did was try to install a large number of updates from the internet. At the time, I refused since I was just getting to know the computer and didn't want to change things. Now I have ord
-
I recently downloaded ios6 and have now lost almost all of my apps. They can be found in the App Store, but what a pain in the behind! Does anyone know how to get my apps back on the screen where they belong? Thanks for any assistance!