MBP intermittently restarts when waking from sleep

I had this problem repeatedly which seemed to stop after I did a full battery of repair utilities with TTP6... When opening the lid after the MBP was asleep (various times, could be a matter of minutes or hours) it would restart, blue screen appears, sometimes even brings up the password screen (I do NOT have the sys prefs set to ask for a password either on restart or on resume from sleep!). It does not make the tone that occurs on restart or starting up, just see the screens change, then the desktop appears, see all the extensions loading on the top bar, dock appears, etc just like a start up or restart would occur but the process is faster overall. Battery level is fine, just randomly restarting. It happened again this evening. I have had some other peculiar issues with the MBP just restarting itself but on coming out of sleep seems by far and away the most common. I am befuddled as to what the problem might be. I'll also note, no peripherals attached. No 3rd party hardware upgrads, all original Apple stuff from initial purchase. Any suggestions on a troubleshooting process and feedback on potential severity of the issue would be greatly appreciated.

Well, it's been awhile since I reinstalled the system to purge it of any goofy files. So, I tried using my Snow Leopard install DVD which will not work!??!? I then tried using my Leopard DVD which will not allow me to reinstall the system either?!?? So, now I'm backing up to my G-Tech mini and I'm going to boot from that drive and wipe out the MBP internal drive, reinstall the OS and use setup assistant to import data from the backup drive. Something is clearly not right that goes above and beyond the weird sleep -> restart issue. Still interested in feedback if this clearly appears to be the result of something that I just don't understand?

Similar Messages

Mac Pro restarts when waking from sleep

Hi everyone.
I just got a brand new Mac Pro (2 x 2.66GHz), and had Apple upgrade the RAM to 2GB (4 x 512MB). My first problem is that the computer always restarts when waking from sleep, which is annoying! I have reset the SMC by unplugging the machine for a minite, but the problem persists. I have also tried sleeping the computer with nothing plugged in except the monitor and keyboard/mouse, but I get the same problem. All software/firmware is fully up to date.
I have also just noticed that the System Profiler states that there is only 1GB RAM in the computer, even though I am sure that it recognised 2GB when I got the machine a fortnight ago (I even have a screen shot of 'about this mac' to prove it!). Can anybody help, or do I need to phone Apple support?
Thanks,
Matthew

I have a similar problem - hard restart when closing the lid to put it to sleep. It looks like there is a bluetooth issue(?), but I'm not sure what to do with it. We don't have any blue tooth devices in our house. From the console log:
Jan 5 14:57:49 Rigpa kernel[0]: System SafeSleep
Jan 5 14:57:49 Rigpa mDNSResponder: Adding browse domain local.
Jan 5 14:57:49 Rigpa kernel[0]: hibernatepage_listsetall start
Jan 5 14:57:49 Rigpa kernel[0]: hibernatepage_listsetall time: 51 ms
Jan 5 14:57:49 Rigpa kernel[0]: pages 93229, wire 29477, act 34496, inact 2520, zf 1141, could discard act 9830 inact 15765
Jan 5 14:57:49 Rigpa kernel[0]: hibernatepage_listsetall found pageCount 93229
Jan 5 14:57:49 Rigpa kernel[0]: IOHibernatePollerOpen, mlget_interruptsenabled 0
Jan 5 14:57:49 Rigpa kernel[0]: IOHibernatePollerOpen(0)
Jan 5 14:57:49 Rigpa kernel[0]: writing 92989 pages
Jan 5 14:57:49 Rigpa kernel[0]: image1Size 41692160
Jan 5 14:57:49 Rigpa kernel[0]: all time: 5774 ms, comp time: 437 ms, deco time: 0 ms,
Jan 5 14:57:49 Rigpa kernel[0]: image 159194624, uncompressed 276045824 (67394), compressed 158654492 (57%), sum1 529d572d, sum2 c6e9eed5
Jan 5 14:57:49 Rigpa kernel[0]: hibernatewriteimage done(0)
Jan 5 14:57:49 Rigpa kernel[0]: sleep
Jan 5 14:57:49 Rigpa kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Jan 5 14:57:49 Rigpa kernel[0]: Started CPU 01
Jan 5 14:57:49 Rigpa kernel[0]: IOBluetoothHCIController::restartShutdownWL this is a wake from sleep
Jan 5 14:57:49 Rigpa kernel[0]: System Wake
Jan 5 14:57:52 Rigpa mDNSResponder: Repeated transitions for interface lo0 (127.0.0.1); delaying packets by 5 seconds
Jan 5 14:57:53 Rigpa configd35: posting notification com.apple.system.config.network_change
Jan 5 14:57:53 Rigpa lookupd185: lookupd (version 369.6) starting - Sat Jan 5 14:57:53 2008

My mac pro restarts when waking from sleep

Hello everyone pls help me.
I have a annoying problem and that is that my Mac Pro restarts after it has been to sleep.
Last week I updated the system with an update from Apple, safteyupdate 2013-003 version 1.0.
I have swedish OsX 10.6.8.
After this update my mac always restarts after waking from sleep.
So what may have gone wrong?
Pls help me in a simple way, and pls describe in easy steps if I have to do something.

One suggestion is to always have cloned your system ahead of time, that means before making changes or updates, early on when it is fresh and working.
And don't just restart. Use Safe Mode at least, better yet use Recovery Mode if on Lion (which I do recommend) and have a small OS Emergency drive for any maintenance - along with a clone working copy of your system.
Don't just reinstall over your system. Do a fresh install on another drive. Image it and set that for maintenance, then clone that to be a new working base for your system.
Setup Assistant does an amazing job.
Forced restarts can corrupt the filesystem and directory as the changes in memory or cache are not written out and drives are not unmounted properly and will come to bite in the rear.
Using Cloning as a Backup Strategy
http://www.macupdate.com/app/mac/7032/carbon-copy-clone
http://www.bombich.com/software/updates/ccc-3.5.html
Create an OS X Lion Install disc
OS X Lion Install to Different Drive
How to create an OS X Lion installation disc MacFixIt
Migration Assistant Update for Mac OS X Snow Leopard
http://www.apple.com/support/lion/installrecovery/
http://reviews.cnet.com/8301-13727_7-20080989-263/how-to-create-an-os-x-lion-ins tallation-disc
http://www.coolestguyplanettech.com/how-to-make-a-bootable-osx-10-8-mountain-lio n-disc-or-drive-from-the-downloaded-mountain-lion-app/
How to clone your system:
http://macperformanceguide.com/Mac-HowToClone-backup.html
http://macperformanceguide.com/Mac-HowToClone.html
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
http://www.macperformanceguide.com/blog/2012/20120711_2-MacPro-internal-clone-ba ckup.html
General purpose Mac troubleshooting guide:
Mac OS X: Starting up in Safe Mode - http://docs.info.apple.com/article.html?artnum=107393
What is Safe Boot, Safe Mode? (Mac OS X) - http://support.apple.com/kb/HT1564
Isolating issues in Mac OS X
Creating a temporary user to isolate user-specific problems:
Isolating an issue by using another user account
Identifying resource hogs and other tips:
Using Activity Monitor to read System Memory and determine how much RAM is being used
Starting the computer in "safe mode":
Mac OS X: What is Safe Boot, Safe Mode?
To identify potential hardware problems:
Apple Hardware Test
General Mac maintenance:
Tips to keep your Mac in top form

Mac Server VPN Requires Restart When Waking from Sleep

I am running OS 10.9.4 and Server 3.1.2.
I had a L2TP VPN configured and working well. I suspect the 10.9.4 update caused the following issue.
ISSUE: After waking from sleep, the VPN service requires a restart in order to accept connections. Clients timeout and receive an error message saying the server is not accepting connections. A quick OFF/ON toggle in the Server GUI fixes the problem.
Any advice or do I need to wait this one out?

If the server is asleep there is nothing awake to answer the clients VPN connection request. As such there is nothing to fix because you are 'holding it wrong'
The nearest solution is to first issue a 'wake on LAN' packet which wakes a sleeping computer, then once it is awake it should answer the request. Except Wake on LAN is designed to only work locally on the same LAN and is aimed more at waking sleeping client devices not sleeping servers.
As both Strontium90 and myself indicated servers are not designed to sleep. They normally have to be running all the time so they are always ready to answer client requests.
A Mac mini acting as a server especially if you use an SSD drive or perhaps as I suggested limit it to just sleeping the hard drive uses a tiny amount of power. You can turn off the monitor as well.

HELP: Mac Pro restarts when waking from sleep

the problem just started a few days ago. i hadn't made any mods or installed any new software. all firmware is current.
i've reset the NVRAM and SMC with no results.
any suggestions?

I have a similar problem - hard restart when closing the lid to put it to sleep. It looks like there is a bluetooth issue(?), but I'm not sure what to do with it. We don't have any blue tooth devices in our house. From the console log:
Jan 5 14:57:49 Rigpa kernel[0]: System SafeSleep
Jan 5 14:57:49 Rigpa mDNSResponder: Adding browse domain local.
Jan 5 14:57:49 Rigpa kernel[0]: hibernatepage_listsetall start
Jan 5 14:57:49 Rigpa kernel[0]: hibernatepage_listsetall time: 51 ms
Jan 5 14:57:49 Rigpa kernel[0]: pages 93229, wire 29477, act 34496, inact 2520, zf 1141, could discard act 9830 inact 15765
Jan 5 14:57:49 Rigpa kernel[0]: hibernatepage_listsetall found pageCount 93229
Jan 5 14:57:49 Rigpa kernel[0]: IOHibernatePollerOpen, mlget_interruptsenabled 0
Jan 5 14:57:49 Rigpa kernel[0]: IOHibernatePollerOpen(0)
Jan 5 14:57:49 Rigpa kernel[0]: writing 92989 pages
Jan 5 14:57:49 Rigpa kernel[0]: image1Size 41692160
Jan 5 14:57:49 Rigpa kernel[0]: all time: 5774 ms, comp time: 437 ms, deco time: 0 ms,
Jan 5 14:57:49 Rigpa kernel[0]: image 159194624, uncompressed 276045824 (67394), compressed 158654492 (57%), sum1 529d572d, sum2 c6e9eed5
Jan 5 14:57:49 Rigpa kernel[0]: hibernatewriteimage done(0)
Jan 5 14:57:49 Rigpa kernel[0]: sleep
Jan 5 14:57:49 Rigpa kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Jan 5 14:57:49 Rigpa kernel[0]: Started CPU 01
Jan 5 14:57:49 Rigpa kernel[0]: IOBluetoothHCIController::restartShutdownWL this is a wake from sleep
Jan 5 14:57:49 Rigpa kernel[0]: System Wake
Jan 5 14:57:52 Rigpa mDNSResponder: Repeated transitions for interface lo0 (127.0.0.1); delaying packets by 5 seconds
Jan 5 14:57:53 Rigpa configd35: posting notification com.apple.system.config.network_change
Jan 5 14:57:53 Rigpa lookupd185: lookupd (version 369.6) starting - Sat Jan 5 14:57:53 2008

Mac restarts when waking from sleep

Please help. I tried resetting SMC & PRAM.
EtreCheck version: 1.9.11 (43) - report generated June 10, 2014 at 4:35:49 PM EDT
Hardware Information:
          Mac Pro (Early 2008)
          Mac Pro - model: MacPro3,1
          2 2.8 GHz Quad-Core Intel Xeon CPUs: 8 cores
          10 GB RAM
Video Information:
          ATI Radeon HD 2600 - VRAM: 256 MB
System Software:
          OS X 10.9.3 (13D65) - Uptime: 0 days 0:6:51
Disk Information:
          WDC WD2002FAEX-007BA0 disk0 : (2 TB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    disk0s2 (disk0s2) <not mounted>: 2 TB
                    Boot OSX (disk0s3) <not mounted>: 134.2 MB
          WDC WD2002FAEX-007BA0 disk1 : (2 TB)
                    EFI (disk1s1) <not mounted>: 209.7 MB
                    disk1s2 (disk1s2) <not mounted>: 2 TB
                    Boot OSX (disk1s3) <not mounted>: 134.2 MB
          PIONEER BD-RW   BDR-206D
USB Information:
          SMSC USB2134
                    SMSC USB2134
                              Realtek USB3.0 Card Reader
          Apple, Inc. Keyboard Hub
                    Apple, Inc Apple Keyboard
          Mitsumi Electric Apple Optical USB Mouse
          Apple Inc. Bluetooth USB Host Controller
Configuration files:
          /etc/hosts - Count: 15
Gatekeeper:
          Mac App Store and identified developers
Kernel Extensions:
          [kext loaded] com.Cycling74.driver.Soundflower (1.6.5 - SDK 10.6) Support
          [not loaded] com.displaylink.dlusbncm (1.11.0 - SDK 10.6) Support
          [kext loaded] com.displaylink.driver.DisplayLinkDriver (2.1 - SDK 10.6) Support
          [not loaded] com.eltima.ElmediaPlayer.kext (1.0 - SDK 10.4) Support
          [not loaded] com.roxio.TDIXController (1.7) Support
          [not loaded] com.silabs.driver.CP210xVCPDriver (3.0.0d1) Support
          [not loaded] com.silabs.driver.CP210xVCPDriver64 (3.0.0d1) Support
          [not loaded] com.wacom.kext.wacomtablet (6.3.8 - SDK 10.9) Support
          [not loaded] foo.tap (1.0) Support
          [not loaded] foo.tun (1.0) Support
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist Support
          [not loaded] com.adobe.SwitchBoard.plist Support
          [loaded] com.bombich.ccc.plist Support
          [running] com.cleverfiles.cfbackd.plist Support
          [running] com.displaylink.displaylinkmanager.plist Support
          [loaded] com.timesoftware.timemachineeditor.helper.plist Support
          [running] vyprvpnservice.plist Support
Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist Support
          [loaded] com.adobe.CS5ServiceManager.plist Support
          [loaded] com.citrix.AuthManager_Mac.plist Support
          [running] com.citrix.ReceiverHelper.plist Support
          [running] com.citrix.ServiceRecords.plist Support
          [not loaded] com.displaylink.useragent-prelogin.plist Support
          [running] com.displaylink.useragent.plist Support
          [running] com.wacom.wacomtablet.plist Support
User Launch Agents:
          [failed] com.adobe.ARM.[...].plist Support
          [loaded] com.google.keystone.agent.plist Support
          [running] com.plexapp.helper.plist Support
          [running] com.spotify.webhelper.plist Support
User Login Items:
          Dropbox
          Messages
          Plex Media Server
          Spotify
          Box Sync
          Launch Nikon Message Center 2
Internet Plug-ins:
          Default Browser: Version: 537 - SDK 10.9
          Flip4Mac WMV Plugin: Version: 2.3.2.6 Support
          F5 SSL VPN Plugin: Version: 7090.2013.0617.1 - SDK 10.8 Support
          Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
          FlashPlayer-10.6: Version: 13.0.0.214 - SDK 10.6 Support
          DivXBrowserPlugin: Version: 2.0 Support
          WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.6 - SDK 10.9 Support
          Flash Player: Version: 13.0.0.214 - SDK 10.6 Outdated! Update
          QuickTime Plugin: Version: 7.7.3
          CitrixICAClientPlugIn: Version: 11.7.2 - SDK 10.7 Support
          iPhotoPhotocast: Version: 7.0
          AdobePDFViewer: Version: 10.1.2 Support
          JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Safari Extensions:
          AdBlock: Version: 2.6.37
          Video Converter: Version: 3.5.0
          Dashlane: Version: 2.4.1.62949
          iGetter Extension: Version: 2.8.8
          Amazon Shopping Assistant: Version: 1.1
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 2.0 - SDK 10.9
          AppleAVBAudio: Version: 203.2 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User iTunes Plug-ins:
          TuneUp Visualizer: Version: 2.2.0 Support
User Internet Plug-ins:
          iGetterScriptablePlugin: Version: 2.8.8 Support
          Dashlane: Version: Dashlane 1.0.0 - SDK 10.7 Support
3rd Party Preference Panes:
          Citrix ShareFile Sync Support
          DivX Support
          Flash Player Support
          Flip4Mac WMV Support
          Growl Support
          Perian Support
          REDcode Support
          WacomTablet Support
Time Machine:
          Time Machine not configured!
Top Processes by CPU:
              50%          repair_packages
               7%          WindowServer
               4%          DisplayLinkUserAgent
               2%          Disk Utility
               2%          DisplayLinkManager
Top Processes by Memory:
          920 MB          repair_packages
          154 MB          Safari
          123 MB          mds_stores
          102 MB          WebKitPluginHost
          92 MB          softwareupdated
Virtual Memory Information:
          5.53 GB          Free RAM
          3.36 GB          Active RAM
          186 MB          Inactive RAM
          953 MB          Wired RAM
          528 MB          Page-ins
          0 B          Page-outs

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
☞ If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
☞ Please don’t post other kinds of diagnostic report.

My MBP doesn't remember my Time Capsule wireless network when waking from sleep

My MBP (OS 10.5.8) doesn't remember my Time Capsule wireless network when waking from sleep. Thus, every time my MBP wakes from sleep, I need to select the Airport icon in the upper menu bar, select "Join other network", enter SSID and password. This is very cumbersome. And, I never had this problem when I was using the ISP's provided wireless router/gateway/DSL modem. Adding the Time Capsule and using it to generate the wireless network has introduced this problem.
It appears that this problem has to do with the hidden SSID. I don't need the lecture on how hidden SSID provides no serious security benefit. That's why I have the WPA2 encryption. I'm interested in a solution that will allow the Time Capsule to generate the wireless network, maintain a hidden SSID, continue to use WPA2 encryption, but have my MBP recognzie and autoconnect to this network.
Solutions I've alread tried:
1. Open Network Preferences
2. Select Airport from left hand column (and ensure Airport is at top of that list)
3. Select Advanced
4. Delete all Preferred Networks.
5. Apply settings.
6. Restart computer
7. Return to Network Preferences and from Advanced page, manually add my network with hidden SSID and WPA2 password
This solution works fine as long as I don't take my computer elsewhere and connect to another network. As soon as my preferred networks list gets another network, my MBP stops finding my TC network. Since I take my laptop to a lot of places (it's a laptop, after all...) this is a problem.
As I say, prior to adding the TC on my network (and using it to generate the wireless network), my MBP had no problem keeping 50+ preferred network names/passwords in the Preferred Network list, but always automatically finding/connecting to my home network without the need to "Join other network." Thus, I assume the problem lies with the Time Capsule.
Any ideas?

LaPastenague, thanks for weighing in. Didn't know that the hidden SSID capability was not IEEE standardized, and thus different devices will handle hidden SSID differently. With my admittedly limited knowledge of how SSID/hidden SSID works, I'm still a little confused as to why my MBP would remember the generic router/gateway's hidden network, but struggle with the TC's hidden network.
To my knowledge, when an SSID is broadcast by a base station (Airport, wireless gateway, etc.), a connecting device (like a laptop, iPad, etc.) detects this broadcast--this would be a passive reception of this SSID signal.
When an SSID is hidden, the base station does not broadcast its identification. Rather, a connecting device must transmit the name, and when the base station recognizes the broadcast, the connection is made. That's what you do when you select "Join another network" and manually enter the SSID.
The idea with OS X's Network Preferences is that these steps, whether for hidden networks or broadcast SSIDs, become automated.
Where is the potential for a different chipset between the TC and the previously used wireless router/gateway to alter this functionality? Shouldn't the selection of an SSID by the MBP to broadcast to seek for a base station be a function solely on the MBP? And once broadcast by the MBP, the TC should detect and reply?
Basically, the MBP can connect to the hidden TC manually just fine. The MBP can connect to the old setup automatically just fine. The MBP cannot connect to the TC automatically. Aren't these automatic connection functions solely on the MBP?
I'll try un-hiding the network and re-verifying that the problem is exclusively with the hidden network.
Z

No Keyboard Backlight when waking from sleep on MBP

Haven't see this anywhere else, but on 10.4 the keyboard backlight would light up when waking from sleep, allowing me to enter my password more easily. Since upgrading to Leopard, that feature has vanished. Not sure it this is classified as a bug or not, but the functionality in the previous version was very useful! It would be nice to have it back!
(And yes, my backlight settings are fine - the backlight turns on once I have entered my password successfully)

Haven't see this anywhere else, but on 10.4 the keyboard backlight would light up when waking from sleep, allowing me to enter my password more easily. Since upgrading to Leopard, that feature has vanished. Not sure it this is classified as a bug or not, but the functionality in the previous version was very useful! It would be nice to have it back!
(And yes, my backlight settings are fine - the backlight turns on once I have entered my password successfully)

Keychain is read-only when waking from sleep

So, when waking from sleep my keychain becomes read-only and I'm forced to restart since many of the applications I tend to use (itunes, safari, skype. messages and disk utility) start giving me error messages or are unresponsive. I've tried repairing the keychain, deleting and creating a new keychain, reinstalling the OS (10.8), resetting the ACLs using the recovery partition, repairing permissions using the recovery partition. The only thing I haven't tried is wiping out the drive and installing the OS anew which I would like to avoid . I am on a 2010 13" macbook pro using 10.8.3. I don't think it started after an update. I did recently install a new hard drive since the previous hard drive died. I used time machine to restore my apps and user account. Advice anyone? Thanks

Hello-
Well I spoke to soon. The problem started a few weeks later. Since then I have installed the OS on to a new hard drive. I did import my user account from a time machine backup but did not import the Apps and System settings. I created a new account and moved my media and documents from my old account to the new account. I then deleted the old account. After all that I am still getting the read-only problem with Keychain. It now happens while I am using my laptop, not just when it wakes from sleep. As I mentioned before the issue is intermittent, about once or twice a week. The last occurrence happened a few minutes after I booted up. I have pasted the log below. I have taken it in to Apple and they ran a check-up and everything came back ok. I'm concerned because my apple care ends in about a week. Any advice you can give would be greatly appreciated. Thanks.
7/10/13 6:52:39.000 AM bootlog[0]: BOOT_TIME 1373464359 0
7/10/13 6:53:06.000 AM kernel[0]: Darwin Kernel Version 12.4.0: Wed May 1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64
7/10/13 6:53:06.000 AM kernel[0]: vm_page_bootstrap: 1944529 free pages and 70703 wired pages
7/10/13 6:53:06.000 AM kernel[0]: kext submap [0xffffff7f80737000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000737000]
7/10/13 6:53:06.000 AM kernel[0]: zone leak detection enabled
7/10/13 6:53:06.000 AM kernel[0]: standard timeslicing quantum is 10000 us
7/10/13 6:53:06.000 AM kernel[0]: standard background quantum is 2500 us
7/10/13 6:53:06.000 AM kernel[0]: mig_table_max_displ = 74
7/10/13 6:53:06.000 AM kernel[0]: corecrypto kext started!
7/10/13 6:53:06.000 AM kernel[0]: Running kernel space in FIPS MODE
7/10/13 6:53:06.000 AM kernel[0]: Plist hmac value is    735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
7/10/13 6:53:06.000 AM kernel[0]: Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS integrity POST test passed!
7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!
7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!
7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS SHA POST test passed!
7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS HMAC POST test passed!
7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!
7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS DRBG POST test passed!
7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS POST passed!
7/10/13 6:53:06.000 AM kernel[0]: AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
7/10/13 6:53:06.000 AM kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
7/10/13 6:53:06.000 AM kernel[0]: calling mpo_policy_init for TMSafetyNet
7/10/13 6:53:06.000 AM kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
7/10/13 6:53:06.000 AM kernel[0]: calling mpo_policy_init for Sandbox
7/10/13 6:53:06.000 AM kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
7/10/13 6:53:06.000 AM kernel[0]: calling mpo_policy_init for Quarantine
7/10/13 6:53:06.000 AM kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
7/10/13 6:53:06.000 AM kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
7/10/13 6:53:06.000 AM kernel[0]: The Regents of the University of California. All rights reserved.
7/10/13 6:53:06.000 AM kernel[0]: MAC Framework successfully initialized
7/10/13 6:53:06.000 AM kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
7/10/13 6:53:06.000 AM kernel[0]: IOAPIC: Version 0x11 Vectors 64:87
7/10/13 6:53:06.000 AM kernel[0]: ACPI: System State [S0 S3 S4 S5]
7/10/13 6:53:06.000 AM kernel[0]: PFM64 (36 cpu) 0xf80000000, 0x80000000
7/10/13 6:53:06.000 AM kernel[0]: [ PCI configuration begin ]
7/10/13 6:53:06.000 AM kernel[0]: console relocated to 0xf80010000
7/10/13 6:53:06.000 AM kernel[0]: PCI configuration changed (bridge=1 device=1 cardbus=0)
7/10/13 6:53:06.000 AM kernel[0]: [ PCI configuration end, bridges 5 devices 24 ]
7/10/13 6:53:06.000 AM kernel[0]: AppleIntelCPUPowerManagement: (built 18:11:47 May 1 2013) initialization complete
7/10/13 6:53:06.000 AM kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 78ca39fffe131078; max speed s800.
7/10/13 6:53:06.000 AM kernel[0]: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833
7/10/13 6:53:06.000 AM kernel[0]: mbinit: done [64 MB total pool size, (42/21) split]
7/10/13 6:53:06.000 AM kernel[0]: Pthread support ABORTS when sync kernel primitives misused
7/10/13 6:53:06.000 AM kernel[0]: rooting via boot-uuid from /chosen: F24E7B60-8654-3521-9DC6-9CA2F1979476
7/10/13 6:53:06.000 AM kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
7/10/13 6:53:06.000 AM kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
7/10/13 6:53:06.000 AM kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
7/10/13 6:53:06.000 AM kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
7/10/13 6:53:06.000 AM kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
7/10/13 6:53:06.000 AM kernel[0]: AppleIntelCPUPowerManagementClient: ready
7/10/13 6:53:06.000 AM kernel[0]: BTCOEXIST off
7/10/13 6:53:06.000 AM kernel[0]: BRCM tunables:
7/10/13 6:53:06.000 AM kernel[0]: pullmode[1] txringsize[ 256] txsendqsize[1024] reapmin[   32] reapcount[ 128]
7/10/13 6:53:06.000 AM kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@A/AppleMCP89AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/ST9750420AS Media/IOGUIDPartitionScheme/Untitled 1@2
7/10/13 6:53:06.000 AM kernel[0]: BSD root: disk0s2, major 1, minor 2
7/10/13 6:53:06.000 AM kernel[0]: Kernel is LP64
7/10/13 6:52:40.694 AM com.apple.launchd[1]: *** launchd[1] has started up. ***
7/10/13 6:52:40.694 AM com.apple.launchd[1]: *** Shutdown logging is enabled. ***
7/10/13 6:53:06.879 AM com.apple.launchd[1]: (com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination
7/10/13 6:53:08.000 AM kernel[0]: BCM5701Enet: Ethernet address c4:2c:03:34:56:ec
7/10/13 6:53:08.000 AM kernel[0]: AirPort_Brcm4331: Ethernet address f8:1e:df:ea:54:f5
7/10/13 6:53:08.000 AM kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
7/10/13 6:53:08.000 AM kernel[0]: IO80211Interface::efiNVRAMPublished():
7/10/13 6:53:09.000 AM kernel[0]: IOBluetoothUSBDFU::probe
7/10/13 6:53:09.000 AM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8213 FirmwareVersion - 0x0201
7/10/13 6:53:09.000 AM kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
7/10/13 6:53:09.000 AM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
7/10/13 6:53:09.000 AM kernel[0]: [IOBluetoothHCIController][start] -- completed
7/10/13 6:53:09.000 AM kernel[0]: Previous Shutdown Cause: 5
7/10/13 6:53:09.000 AM kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
7/10/13 6:53:09.000 AM kernel[0]: NVDAStartup: Official
7/10/13 6:53:09.000 AM kernel[0]: NVDANV50HAL loaded and registered
7/10/13 6:53:09.519 AM com.apple.SecurityServer[15]: Session 100000 created
7/10/13 6:53:10.000 AM kernel[0]: DSMOS has arrived
7/10/13 6:53:11.454 AM airportd[27]: _processDLILEvent: en1 attached (down)
7/10/13 6:53:11.000 AM kernel[0]: createVirtIf(): ifRole = 1
7/10/13 6:53:11.000 AM kernel[0]: in func createVirtualInterface ifRole = 1
7/10/13 6:53:11.000 AM kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1 this 0xffffff8017662400
7/10/13 6:53:11.000 AM kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
7/10/13 6:53:11.000 AM kernel[0]: Created virtif 0xffffff8017662400 p2p0
7/10/13 6:53:11.941 AM hidd[56]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
7/10/13 6:53:13.000 AM kernel[0]: macx_swapon SUCCESS
7/10/13 6:53:14.349 AM configd[18]: setting hostname to "Pluto.local"
7/10/13 6:53:14.000 AM kernel[0]: AirPort: Link Down on en1. Reason 1 (Unspecified).
7/10/13 6:53:14.000 AM kernel[0]: en1::IO80211Interface::postMessage bssid changed
7/10/13 6:53:14.354 AM configd[18]: network changed.
7/10/13 6:53:18.272 AM com.apple.SecurityServer[15]: Entering service
7/10/13 6:53:18.519 AM blued[65]: Read the UHE Info
7/10/13 6:53:18.519 AM blued[65]: Read version 2 info. Number of devices:2
7/10/13 6:53:18.519 AM blued[65]: Class of device:     0x2580
7/10/13 6:53:18.519 AM blued[65]: Device name: 'ervin's' length:8
7/10/13 6:53:18.519 AM blued[65]: Finished reading the HID data
7/10/13 6:53:18.519 AM blued[65]: Found a device with PID:0x030d VID:0x05ac
7/10/13 6:53:18.520 AM blued[65]: Class of device:     0x2540
7/10/13 6:53:18.520 AM blued[65]: Device name: 'ervinsiax’s Keyboard' length:23
7/10/13 6:53:18.520 AM blued[65]: Finished reading the HID data
7/10/13 6:53:18.521 AM blued[65]: Found a device with PID:0x0255 VID:0x05ac
7/10/13 6:53:18.987 AM UserEventAgent[11]: Captive: [HandleNetworkInformationChanged:2435] nwi_state_copy returned NULL
7/10/13 6:53:18.993 AM loginwindow[51]: Login Window Application Started
7/10/13 6:53:20.506 AM awacsd[66]: Starting awacsd connectivity-78.3 (Apr 25 2013 19:22:44)
7/10/13 6:53:20.510 AM awacsd[66]: InnerStore CopyAllZones: no info in Dynamic Store
7/10/13 6:53:20.635 AM kdc[54]: label: default
7/10/13 6:53:20.635 AM kdc[54]: dbname: od:/Local/Default
7/10/13 6:53:20.635 AM kdc[54]: mkey_file: /var/db/krb5kdc/m-key
7/10/13 6:53:20.635 AM kdc[54]: acl_file: /var/db/krb5kdc/kadmind.acl
7/10/13 6:53:20.673 AM mDNSResponder[48]: mDNSResponder mDNSResponder-379.38.1 (Apr 25 2013 19:19:56) starting OSXVers 12
7/10/13 6:53:21.537 AM coreservicesd[70]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
7/10/13 6:53:21.539 AM mds[47]: (Normal) FMW: FMW 0 0
7/10/13 6:53:21.836 AM appleeventsd[62]: main: Starting up
7/10/13 6:53:21.865 AM com.apple.usbmuxd[36]: usbmuxd-296.4 on Dec 21 2012 at 16:11:14, running 64 bit
7/10/13 6:53:23.268 AM aosnotifyd[85]: bootstrap_look_up failed (44e)
7/10/13 6:53:24.487 AM netbiosd[69]: Unable to start NetBIOS name service:
7/10/13 6:53:24.499 AM digest-service[87]: label: default
7/10/13 6:53:24.499 AM digest-service[87]: dbname: od:/Local/Default
7/10/13 6:53:24.499 AM digest-service[87]: mkey_file: /var/db/krb5kdc/m-key
7/10/13 6:53:24.499 AM digest-service[87]: acl_file: /var/db/krb5kdc/kadmind.acl
7/10/13 6:53:24.501 AM digest-service[87]: digest-request: uid=0
7/10/13 6:53:24.532 AM rpcsvchost[88]: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
7/10/13 6:53:24.538 AM digest-service[87]: digest-request: init request
7/10/13 6:53:24.544 AM digest-service[87]: digest-request: init return domain: BUILTIN server: PLUTO
7/10/13 6:53:25.353 AM systemkeychain[75]: done file: /var/run/systemkeychaincheck.done
7/10/13 6:53:25.374 AM kdc[54]: WARNING Found KDC certificate (O=System Identity,CN=com.apple.kerberos.kdc)is missing the PK-INIT KDC EKU, this is bad for interoperability.
7/10/13 6:53:25.387 AM configd[18]: network changed: DNS*
7/10/13 6:53:25.393 AM mDNSResponder[48]: D2D_IPC: Loaded
7/10/13 6:53:25.393 AM mDNSResponder[48]: D2DInitialize succeeded
7/10/13 6:53:25.396 AM configd[18]: network changed: DNS*
7/10/13 6:53:25.398 AM mDNSResponder[48]: Adding registration domain 40041775.members.btmm.icloud.com.
7/10/13 6:53:25.671 AM kdc[54]: KDC started
7/10/13 6:53:26.235 AM WindowServer[71]: Server is starting up
7/10/13 6:53:26.652 AM locationd[52]: NOTICE,Location icon should now be in state 0
7/10/13 6:53:27.102 AM awacsd[66]: Configuring lazy AWACS client: 40041775.p03.members.btmm.icloud.com.
7/10/13 6:53:28.499 AM apsd[68]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
7/10/13 6:53:28.500 AM apsd[68]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
7/10/13 6:53:28.598 AM apsd[68]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
7/10/13 6:53:28.599 AM apsd[68]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
7/10/13 6:53:28.618 AM awacsd[66]: KV HTTP 0
7/10/13 6:53:28.908 AM WindowServer[71]: Session 256 retained (2 references)
7/10/13 6:53:28.908 AM WindowServer[71]: Session 256 released (1 references)
7/10/13 6:53:30.969 AM WindowServer[71]: Session 256 retained (2 references)
7/10/13 6:53:30.970 AM WindowServer[71]: init_page_flip: page flip mode is on
7/10/13 6:53:31.409 AM WindowServer[71]: mux_initialize: Couldn't find any matches
7/10/13 6:53:31.426 AM WindowServer[71]: GLCompositor enabled for tile size [256 x 256]
7/10/13 6:53:31.426 AM WindowServer[71]: CGXGLInitMipMap: mip map mode is on
7/10/13 6:53:33.627 AM awacsd[66]: KV HTTP 0
7/10/13 6:53:34.283 AM WindowServer[71]: WSMachineUsesNewStyleMirroring: false
7/10/13 6:53:34.283 AM WindowServer[71]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
7/10/13 6:53:34.283 AM WindowServer[71]: Display 0x042730c0: GL mask 0x1; bounds (0, 0)[1280 x 800], 27 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9cc3, S/N 0, Unit 0, Rotation 0
UUID 0x0000061000009cc300000000042730c0
7/10/13 6:53:34.284 AM WindowServer[71]: Created shield window 0x5 for display 0x003f003d
7/10/13 6:53:34.288 AM WindowServer[71]: Created shield window 0x6 for display 0x042730c0
7/10/13 6:53:35.073 AM WindowServer[71]: Display 0x042730c0: GL mask 0x1; bounds (0, 0)[1280 x 800], 27 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9cc3, S/N 0, Unit 0, Rotation 0
UUID 0x0000061000009cc300000000042730c0
7/10/13 6:53:35.073 AM WindowServer[71]: Display 0x003f003d: GL mask 0x2; bounds (2304, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
7/10/13 6:53:35.073 AM WindowServer[71]: CGXPerformInitialDisplayConfiguration
7/10/13 6:53:35.073 AM WindowServer[71]:   Display 0x042730c0: MappedDisplay Unit 0; Vendor 0x610 Model 0x9cc3 S/N 0 Dimensions 11.26 x 7.05; online enabled built-in, Bounds (0,0)[1280 x 800], Rotation 0, Resolution 1
7/10/13 6:53:35.073 AM WindowServer[71]:   Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2304,0)[1 x 1], Rotation 0, Resolution 1
7/10/13 6:53:36.423 AM WindowServer[71]: GLCompositor: GL renderer id 0x0102261a, GL mask 0x00000003, accelerator 0x00003c8b, unit 0, caps QEX|QGL|MIPMAP, vram 256 MB
7/10/13 6:53:36.433 AM WindowServer[71]: GLCompositor: GL renderer id 0x0102261a, GL mask 0x00000003, texture units 8, texture max 8192, viewport max {8192, 8192}, extensions FPRG|NPOT|GLSL|FLOAT
7/10/13 6:53:36.436 AM loginwindow[51]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
7/10/13 6:53:36.454 AM hidd[56]: void __IOHIDLoadBundles(): Loaded 0 HID plugins
7/10/13 6:53:36.607 AM WindowServer[71]: Unable to open IOHIDSystem (e00002bd)
7/10/13 6:53:36.000 AM kernel[0]: virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)
7/10/13 6:53:37.536 AM WindowServer[71]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
7/10/13 6:53:39.901 AM fseventsd[57]: Logging disabled completely for device:1: /Volumes/Recovery HD
7/10/13 6:53:43.565 AM WindowServer[71]: Created shield window 0x7 for display 0x042730c0
7/10/13 6:53:43.566 AM WindowServer[71]: Display 0x042730c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
7/10/13 6:53:43.586 AM WindowServer[71]: Display 0x042730c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
7/10/13 6:53:43.635 AM awacsd[66]: KV HTTP 0
7/10/13 6:53:43.927 AM WindowServer[71]: Display 0x042730c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
7/10/13 6:53:43.979 AM launchctl[124]: com.apple.findmymacmessenger: Already loaded
7/10/13 6:53:44.003 AM com.apple.SecurityServer[15]: Session 100004 created
7/10/13 6:53:44.146 AM hidd[56]: CGSShutdownServerConnections: Detaching application from window server
7/10/13 6:53:44.147 AM hidd[56]: CGSDisplayServerShutdown: Detaching display subsystem from window server
7/10/13 6:53:44.186 AM loginwindow[51]: Login Window Started Security Agent
7/10/13 6:53:44.361 AM SecurityAgent[133]: This is the first run
7/10/13 6:53:44.362 AM SecurityAgent[133]: MacBuddy was run = 0
7/10/13 6:53:44.367 AM coreaudiod[134]: Enabled automatic stack shots because audio IO is inactive
7/10/13 6:53:45.276 AM UserEventAgent[125]: cannot find useragent 1102
7/10/13 6:53:46.754 AM SecurityAgent[133]: spawn_via_launchd() failed, errno=5 label=[0x0-0x7007].com.apple.AppleSpell path=/System/Library/Services/AppleSpell.service/Contents/MacOS/AppleSpell flags=0
7/10/13 6:53:46.754 AM SecurityAgent[133]: spawn_via_launchd() failed, errno=5 label=[0x0-0x7007].com.apple.AppleSpell path=/System/Library/Services/AppleSpell.service/Contents/MacOS/AppleSpell flags=0
7/10/13 6:53:50.000 AM kernel[0]: USBMSC Identifier (non-unique): 20080718000003 0x928 0xa 0x0
7/10/13 6:53:53.435 AM _netbios[143]: /usr/libexec/ntpd-wrapper: scutil key State:/Network/Global/DNS not present after 30 seconds
7/10/13 6:53:53.790 AM _netbios[146]: Unable to resolve hostname(s)
7/10/13 6:53:53.808 AM ntpd[81]: proto: precision = 1.000 usec
7/10/13 6:54:02.217 AM SecurityAgent[133]: User info context values set for ervin
7/10/13 6:54:02.657 AM SecurityAgent[133]: Login Window login proceeding
7/10/13 6:54:03.085 AM loginwindow[51]: Login Window - Returned from Security Agent
7/10/13 6:54:03.132 AM loginwindow[51]: ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort, err: 1102
7/10/13 6:54:03.148 AM loginwindow[51]: USER_PROCESS: 51 console
7/10/13 6:54:03.329 AM com.apple.launchd.peruser.503[149]: (com.apple.gamed) Ignored this key: UserName
7/10/13 6:54:03.329 AM com.apple.launchd.peruser.503[149]: (com.apple.gamed) Ignored this key: GroupName
7/10/13 6:54:03.330 AM com.apple.launchd.peruser.503[149]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
7/10/13 6:54:03.337 AM loginwindow[51]: Connection with distnoted server was invalidated
7/10/13 6:54:03.375 AM distnoted[153]: # distnote server agent absolute time: 85.254455240   civil time: Wed Jul 10 06:54:03 2013   pid: 153 uid: 503 root: no
7/10/13 6:54:03.640 AM awacsd[66]: KV HTTP 0
7/10/13 6:54:04.135 AM blued[65]: kBTXPCUpdateUserPreferences gConsoleUserUID = 503
7/10/13 6:54:04.868 AM com.apple.SecurityServer[15]: Session 100007 created
7/10/13 6:54:07.730 AM WindowServer[71]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
7/10/13 6:54:07.934 AM WindowServer[71]: Display 0x042730c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
7/10/13 6:54:08.208 AM NetworkBrowserAgent[184]: Starting NetworkBrowserAgent
7/10/13 6:54:08.867 AM talagent[177]: _LSSetApplicationInformationItem(kLSDefaultSessionID, asn, _kLSApplicationIsHiddenKey, hidden ? kCFBooleanTrue : kCFBooleanFalse, NULL) produced OSStatus -50 on line 623 in TCApplication.m
7/10/13 6:54:08.868 AM talagent[177]: _LSSetApplicationInformationItem(kLSDefaultSessionID, asn, TAL_kLSIsProxiedForTALKey, kCFBooleanTrue, NULL) produced OSStatus -50 on line 626 in TCApplication.m
7/10/13 6:54:09.311 AM WindowServer[71]: kCGErrorNotImplemented: receive_notification: CPXSetEventFilter failed
7/10/13 6:54:09.357 AM coreservicesd[70]: Can't change an application into stopped state for app App:"iTunes" [ 0x0/0xa00a] @ 0x0x7fe8b9e31660 because it's already been started.
7/10/13 6:54:09.521 AM WindowServer[71]: kCGErrorNotImplemented: receive_notification: CPXSetEventFilter failed
7/10/13 6:54:09.000 AM kernel[0]: NTFS driver 3.10 [Flags: R/W].
7/10/13 6:54:09.000 AM kernel[0]: NTFS volume name , version 3.1.
7/10/13 6:54:09.000 AM kernel[0]: NTFS-fs warning (device /dev/disk1s1, pid 188): ntfs_system_inodes_get(): $LogFile is not clean. Will not be able to remount read-write. Mount in Windows.
7/10/13 6:54:12.043 AM WindowServer[71]: kCGErrorNotImplemented: receive_notification: CPXSetEventFilter failed
7/10/13 6:54:16.235 AM WindowServer[71]: CGXDisableUpdate: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
7/10/13 6:54:16.249 AM WindowServer[71]: reenable_update_for_connection: UI updates were finally reenabled by application "Finder" after 1.01 seconds (server forcibly re-enabled them after 1.00 seconds)
7/10/13 6:54:17.067 AM SystemUIServer[178]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
7/10/13 6:54:17.067 AM SystemUIServer[178]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
7/10/13 6:54:24.396 AM CalendarAgent[190]: [com.apple.calendar.store.log.caldav.queue] [Got error on refresh, but not rectifying principal because it was manually configured: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7f9c328d8100 {NSUnderlyingError=0x7f9c32891880 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://ervin.siax%[email protected]/calendar/dav/ervin.siax%40gma il.com/user///ervin.siax%[email protected]/calendar/dav/ervin.siax%40gmail.com/user/, NSErrorFailingURLKey=https://ervin.siax%[email protected]/calendar/dav/ervin.siax%40gma il.com/user///ervin.siax%[email protected]/calendar/dav/ervin.siax%40gmail.com/user/, NSLocalizedDescription=The Internet connection appears to be offline.}]
7/10/13 6:54:24.426 AM CalendarAgent[190]: [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7f9c328da810 {NSUnderlyingError=0x7f9c32891880 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://ervin.siax%[email protected]/calendar/dav/ervin.siax%40gma il.com/user///ervin.siax%[email protected]/calendar/dav/ervin.siax%40gmail.com/user/, NSErrorFailingURLKey=

Kernel panic when waking from sleep

My eMac (1Ghz, 256 Mb RAM, dual boot OS 9.2.2/OS X 10.2.8(upgraded from 10.2.4)) has a recurring but intermittent issue where it suffers from a kernel panic when waking from sleep.
In the past I managed to fix the issue by resetting PRAM and NVRAM, but this doesn't seem to work anymore.
Things I've found out until now:
- Apple Hardware Test and Techtool Deluxe can't find anything wrong (all tests are passed).
- No kernel panic log is written - apparently the kernel panic occurs before the log can be written.
- Crash appears to be network-related. My IP address and network card address are shown at the bottom of the panic window.
- After restarting, Finder windows revert to a state from two or three days ago...
- Login items aren't the problem. I removed them all - this doesn't make any difference.
- no weird things in the startup items folders, AFAIK.
I'm on the verge of reinstalling OS X, but I think I already did this a couple of years ago, and it didn't help.
Please help.
Thomas

Nominally, you'd download the OS X Update Combo 10.2.8 after reinstalling 10.2.4, then use Software Update to identify any additional security and other software updates. There was an issue with early builds of 10.2 failing the 10.2.8 udate if done directly, but working fine if one first updated to an intermediate version such as 10.2.6; I think that problem affected 10.2 through 10.2.3 and your 10.2.4 should be good to go directly to 10.2.8, but if there are any problems, you can go back to 10.2.4, then search the Apple Downloads link for 10.2.6, then 10.2.8
With 10.2.x, it's prudent to run Repair Permissions after each OS and security update before moving on to the next.

Freeze when waking from sleep since 10.4.11

Ever since updating to 10.4.11, My MBP locks up upon waking from sleep. It's the same problem I've had for months. The screen freezes and I get a spinning beach ball and the hard drive clicks. It usually happens when scrolling web pages in Safari, but it also happens at other times, but not as frequently. It happens a second time and the entire system seizes up. No crash log is generated. Anyone else seeing this?

I ran AHT and TechTool Deluxe 3.1.1 again and both reported no hard drive problems. I'm fully backed up and I'm calling Apple Care tomorrow. I'm concerned because I have one of the problematic Seagate hard drives; serial number and firmware match the troublemakers. Back over the summer, I called Apple Care about this and they suggested I rename my existing ~/Library/Preferences folder and restart to create all new pref files. This seemed to work for about two-three weeks.

Trackpad Jerky or Unresponsive when waking from sleep

I've been having a problem with my trackpad being extremely jerky and unresponsive when it is waking up from sleep. I am a new mac user and I've only had my macbook pro since christmas and this problem is really getting annoying. Twice, I've had to just push the power button and press enter so my notebook would shut down and I could restart. Any Ideas?

First, when waking from sleep, MBP requires a little to get up to speed as it wakes if properly put to sleep. The MBP does hibernate and write to the hard disc when sleeping and this takes some time as does reading back. The book will be viewable immediately on waking but can seem laggard while fully getting up to speed from hibernation. Do not try to wake the computer until the little wake/sleep light has begun pulsing. Two, if you have a usb connection going or an expresscard inserted ... ensure that it lets the computer wake/sleep properly. Before sleeping the 'book, power off the connected items so that they do not interfere with the process.
What connections do you use? and what processes are going when you attempt to sleep the computer?
Use the Activity Monitor and the Console to check what is happening. Both the Console Log and the System Log in the console can provide you with info regarding your problems. Check the logs and post problematic entries here if you cannot interpret them yourself.
Message was edited by: Rhyd

Since updating to Lion the iMac won't recognise the external hard drive (maxtor) when waking from sleep mode,

Hi All, Since updating to Lion, my imac won't recognise the ext HDD (Maxtor) when waking from sleep mode, I have tried another port, diisc utility (Ext HDD not listed in here) but nothing works. I now find that I have to restart the imac to get the drive recognised..which is fine until the imac goes into sleep mode then I lose the drive and have to restart etc etc.....anyone suffering same issue. The Ext Drive worked perfectly until the upgrade..

Thanks for this, and apologies for delay in replying...in between seeing your post I backed up the ext hdd to another mac and used the disc utility to erase and repair and then re mounted the ext hdd. OK. I have then tested the ext hdd being recognised when waking from sleep mode a few times and everything appears to be fine. If this doesn't work (long term) I will follow the instructions as you have suggested....
I now have a new problem with my HP printer (Photosmart Plus) which is not being recognised by a new wireless router..Ok whilst the router is switch on and I have reconfigured the printer..but when the router is switched off overnight and then switched back on...I get a 'printer is not connected' message and have to go through the re configure routine all over. I am minded to think this is a router problem as the same issue is happening to my wifes Mac Book Pro (which is only a few weeks old)...any suggestions..

IMac loses connection to network when waking from sleep

Hi There,
We are a small mixed environment of Macs and PCs running on a Windows 2008 domain. One of 2 iMacs that now run Mountain Lion 10.8.5 is having problems when waking from sleep. One of our designers will go for lunch and the machine will sleep for about 30 to 40 minutes. Upon her return the iMac will kick her off of the 3 shares she usually logs into (2 are on Win2008 machines, and 1 is a MacPro running 10.6.8 Server).
If she has files open in any of the Creative Suite Apps, the app will crash and she will have to restart the whole machine. If no files are open then she can usually reconnect to the shares after a short while. Obviously I told her not to leave any files open, but its causing her some headaches.
Its also creating srv errors (id 2012) on our domain controllers, when she tries to wake her machine.
This Imac is a late 2009, and we have a 2011 model that has no issues at all. Both are set exactly the same.
I have reset SMC, Pram, and rebinded to the domain, and searched through these forums quite a bit to no avail.
Any thoughts or suggestions would be much appreciated.

I am continuing to work on this issue, and have tried a number of things based on searching here and elsewhere.
And Lucky Me, I have been able to replicate this behavior on one of other Macs (imac 2011, on 10.8.5). I also see errors on 2 separate Windows file servers on the domain (Event ID: srv 2012).
Below I am posting what seems to be the relevant area of the log.
Nov 14 11:48:04 PrePressMac2 kernel[0]: Wake reason: EHC1
Nov 14 11:48:04 PrePressMac2 kernel[0]: Previous Sleep Cause: 5
Nov 14 11:48:04 PrePressMac2 kernel[0]: The USB device HubDevice (Port 1 of Hub at 0xfd000000) may have caused a wake by issuing a remote wakeup (2)
Nov 14 11:48:04 PrePressMac2 kernel[0]: 18323.795216: setDISASSOC from ATH_INTERFACE_CLASS disconnectVap
Nov 14 11:48:04 PrePressMac2 kernel[0]: 18323.795224: switchVap from 1 to 1
Nov 14 11:48:04 PrePressMac2 kernel[0]: The USB device Keyboard Hub (Port 3 of Hub at 0xfd100000) may have caused a wake by issuing a remote wakeup (3)
Nov 14 11:48:04 PrePressMac2 kernel[0]: The USB device Apple Keyboard (Port 2 of Hub at 0xfd130000) may have caused a wake by issuing a remote wakeup (3)
Nov 14 11:48:04 PrePressMac2 kernel[0]: HID tickle 117 ms
Nov 14 11:48:04 PrePressMac2 kernel[0]: TBT W (1): 0 [x]
Nov 14 11:48:04 PrePressMac2.local WindowServer[90]: handle_will_sleep_auth_and_shield_windows: no action for lock state 1
Nov 14 11:48:04 PrePressMac2.local WindowServer[90]: Created shield window 0x1e1 for display 0x003f003d
Nov 14 11:48:04 PrePressMac2.local WindowServer[90]: handle_will_sleep_auth_and_shield_windows: no action for lock state 1
Nov 14 11:48:04 PrePressMac2.local WindowServer[90]: Created shield window 0x1e2 for display 0x003f003e
Nov 14 11:48:04 PrePressMac2.local WindowServer[90]: handle_will_sleep_auth_and_shield_windows: no action for lock state 1
Nov 14 11:48:04 PrePressMac2.local WindowServer[90]: Created shield window 0x1e3 for display 0x003f003f
Nov 14 11:48:04 PrePressMac2.local WindowServer[90]: handle_will_sleep_auth_and_shield_windows: no action for lock state 1
Nov 14 11:48:04 PrePressMac2.local WindowServer[90]: Created shield window 0x1e4 for display 0x003f0040
Nov 14 11:48:04 PrePressMac2.local WindowServer[90]: handle_will_sleep_auth_and_shield_windows: no action for lock state 1
Nov 14 11:48:05 PrePressMac2 kernel[0]: AppleBCM5701::selectMedium - autoselect, any duplex, EEE allowed, flow control allowed
Nov 14 11:48:05 PrePressMac2 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link down on en0
Nov 14 11:48:06 PrePressMac2.local KernelEventAgent[47]: tid 00000000 received event(s) VQ_NOTRESP (1)
Nov 14 11:48:06 PrePressMac2.local KernelEventAgent[47]: tid 00000000 type 'smbfs', mounted on '/Volumes/PrePress', from '//aconti@GAIA/PrePress', not responding
Nov 14 11:48:06 PrePressMac2.local KernelEventAgent[47]: tid 00000000 found 1 filesystem(s) with problem(s)
Nov 14 11:48:10 PrePressMac2 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,0321,0de1,0300,c5e1,7800]
Nov 14 11:48:12 PrePressMac2.local configd[19]: network changed: v4(en0+:192.168.1.184) DNS+ Proxy+ SMB+
Nov 14 11:48:12 PrePressMac2.local SophosAntiVirus[67]: reloading scheduled scans...
Nov 14 11:48:12 prepressmac2.cutpasteandprint.net configd[19]: setting hostname to "prepressmac2.cutpasteandprint.net"
Nov 14 11:48:12 prepressmac2.cutpasteandprint.net digest-service[1048]: label: default
Nov 14 11:48:12 prepressmac2.cutpasteandprint.net digest-service[1048]:           dbname: od:/Local/Default
Nov 14 11:48:12 prepressmac2.cutpasteandprint.net digest-service[1048]:           mkey_file: /var/db/krb5kdc/m-key
Nov 14 11:48:12 prepressmac2.cutpasteandprint.net digest-service[1048]:           acl_file: /var/db/krb5kdc/kadmind.acl
Nov 14 11:48:12 prepressmac2.cutpasteandprint.net digest-service[1048]: digest-request: uid=0
Nov 14 11:48:12 prepressmac2.cutpasteandprint.net rpcsvchost[1049]: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
Nov 14 11:48:12 prepressmac2.cutpasteandprint.net digest-service[1048]: digest-request: init request
Nov 14 11:48:12 prepressmac2.cutpasteandprint.net digest-service[1048]: digest-request: init return domain: CPP server: PREPRESSMAC2
Nov 14 11:48:12 prepressmac2 kernel[0]: Sandbox: sandboxd(1050) deny mach-lookup com.apple.coresymbolicationd
Nov 14 11:48:12 prepressmac2.cutpasteandprint.net sandboxd[1050] ([1049]): rpcsvchost(1049) deny file-read-data /private/var/root/Library/Preferences/ByHost/.GlobalPreferences.037506C4-0B10-5 70D-A7B6-B3B8F7AE0CC6.plist
Nov 14 11:48:12 prepressmac2.cutpasteandprint.net sandboxd[1050] ([1049]): rpcsvchost(1049) deny file-read-data /private/var/root/Library/Preferences/.GlobalPreferences.plist
Nov 14 11:48:13 prepressmac2.cutpasteandprint.net nsupdate[1055]: krb5_sendto_context is called on main thread, its a blocking api
Nov 14 11:48:13 prepressmac2.cutpasteandprint.net nsupdate[1055]: gss_init_sec_context is called on main thread, its a blocking api
Nov 14 11:48:13 prepressmac2.cutpasteandprint.net nsupdate[1056]: gss_init_sec_context is called on main thread, its a blocking api
Nov 14 11:48:14 prepressmac2.cutpasteandprint.net nsupdate[1057]: krb5_sendto_context is called on main thread, its a blocking api
Nov 14 11:48:14 prepressmac2.cutpasteandprint.net nsupdate[1057]: gss_init_sec_context is called on main thread, its a blocking api
Nov 14 11:48:14 prepressmac2.cutpasteandprint.net nsupdate[1058]: gss_init_sec_context is called on main thread, its a blocking api
Nov 14 11:48:15 prepressmac2.cutpasteandprint.net nsupdate[1060]: krb5_sendto_context is called on main thread, its a blocking api
Nov 14 11:48:15 prepressmac2.cutpasteandprint.net nsupdate[1060]: gss_init_sec_context is called on main thread, its a blocking api
Nov 14 11:48:16 prepressmac2.cutpasteandprint.net nsupdate[1061]: gss_init_sec_context is called on main thread, its a blocking api
Nov 14 11:48:17 prepressmac2 com.apple.launchd[1] (com.apple.smb.preferences): Throttling respawn: Will start in 5 seconds
Nov 14 11:48:17 --- last message repeated 2 times ---
Nov 14 11:48:17 prepressmac2.cutpasteandprint.net nsupdate[1063]: krb5_sendto_context is called on main thread, its a blocking api
Nov 14 11:48:17 prepressmac2.cutpasteandprint.net nsupdate[1063]: gss_init_sec_context is called on main thread, its a blocking api
Nov 14 11:48:18 prepressmac2.cutpasteandprint.net nsupdate[1067]: gss_init_sec_context is called on main thread, its a blocking api
Nov 14 11:48:18 prepressmac2.cutpasteandprint.net netbiosd[92]: name servers down?
Nov 14 11:48:19 prepressmac2.cutpasteandprint.net nsupdate[1068]: krb5_sendto_context is called on main thread, its a blocking api
Nov 14 11:48:19 prepressmac2.cutpasteandprint.net nsupdate[1068]: gss_init_sec_context is called on main thread, its a blocking api
Nov 14 11:48:19 prepressmac2.cutpasteandprint.net nsupdate[1069]: gss_init_sec_context is called on main thread, its a blocking api
Nov 14 11:48:22 prepressmac2.cutpasteandprint.net digest-service[1048]: digest-request: uid=0
Nov 14 11:48:22 prepressmac2.cutpasteandprint.net digest-service[1048]: digest-request: init request
Nov 14 11:48:22 prepressmac2.cutpasteandprint.net digest-service[1048]: digest-request: init return domain: CPP server: PREPRESSMAC2
Nov 14 11:48:22 prepressmac2.cutpasteandprint.net KernelEventAgent[47]: tid 00000000 received event(s) VQ_NOTRESP (1)
Nov 14 11:48:22 prepressmac2 kernel[0]: smb_iod_reconnect: Reconnected share PREPRESS with server GAIA
Nov 14 11:48:32 prepressmac2.cutpasteandprint.net ManagedClient[1077]: ODUGetMCXRecordWithCache(): record unique ID for 'PrePressMac2' not set
Nov 14 11:48:32 prepressmac2.cutpasteandprint.net ManagedClient[1077]: ODUGetMCXRecordWithCache() Accessing network user record from Active Directory not allowed because no authentication information was supplied.
Nov 14 11:56:25 prepressmac2 com.apple.launchd.peruser.1997381720[389] ([0x0-0x4a04a].com.adobe.InDesign[630]): Exited: Terminated: 15
Nov 14 11:56:34 prepressmac2.cutpasteandprint.net spindump[1100]: Saved hang report for Adobe InDesign CS5.5 version 7.5.3.333 (7530) to /Library/Logs/DiagnosticReports/Adobe InDesign CS5.5_2013-11-14-115634_PrePressMac2.hang
This is from the 2011 iMac, and I see something very similar to this on the 2009 machine.
I continue to think this is a software issue related to 10.8.5 and Adobe CS (CS5 on the 2009 machine and CS 5.5 on the 2011) as this appears to have come up only since the recent update.
Any help would be appreciated.

Restarting after waking from sleep

I have a mid 2010 macbook pro running Mountain Lion OS X 10.8.3 of which keeps restarting after being left in sleep mode for an hour or two. When waking from sleep mode, the mac functions for about 5 seconds, before restarting by itself. I have tried deleting certain plist files (as suggested by other posts) but that doesn't seem to have helped. I have also recently installed a new hard drive, but i continue to have the same problem. Below is the panic report from the recent restart after waking from sleep mode:
Thu May 23 22:40:58 2013
panic(cpu 0 caller 0xffffff7f9a7957f2): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff811b9a5000 0x0a5480a2, D0, P2/4
Backtrace (CPU 0), Frame : Return Address
0xffffff810a102f80 : 0xffffff801a01d626
0xffffff810a102ff0 : 0xffffff7f9a7957f2
0xffffff810a1030b0 : 0xffffff7f9a8923b9
0xffffff810a103110 : 0xffffff7f9a89242e
0xffffff810a103180 : 0xffffff7f9abb8c82
0xffffff810a1032b0 : 0xffffff7f9a8b8fe8
0xffffff810a1032f0 : 0xffffff7f9a79d567
0xffffff810a1033a0 : 0xffffff7f9a79b05a
0xffffff810a1035a0 : 0xffffff7f9a79c983
0xffffff810a103670 : 0xffffff7f9b8b5790
0xffffff810a103730 : 0xffffff7f9b8e0f98
0xffffff810a1037b0 : 0xffffff7f9b8c8308
0xffffff810a103810 : 0xffffff7f9b8c8be9
0xffffff810a103860 : 0xffffff7f9b8c909b
0xffffff810a1038d0 : 0xffffff7f9b8c98d1
0xffffff810a103910 : 0xffffff7f9b89534f
0xffffff810a103a90 : 0xffffff7f9b8c5e39
0xffffff810a103b50 : 0xffffff7f9b893de8
0xffffff810a103ba0 : 0xffffff801a4650c9
0xffffff810a103bc0 : 0xffffff801a466670
0xffffff810a103c20 : 0xffffff801a46408f
0xffffff810a103d70 : 0xffffff801a0984a1
0xffffff810a103e80 : 0xffffff801a020aed
0xffffff810a103eb0 : 0xffffff801a010448
0xffffff810a103f00 : 0xffffff801a01961b
0xffffff810a103f70 : 0xffffff801a0a5dd6
0xffffff810a103fb0 : 0xffffff801a0cdd43
      Kernel Extensions in backtrace:
         com.apple.NVDAResman(8.1)[A26D2A3D-C06F-3A0F-BCFF-901A98C93C3D]@0xffffff7f9a738 000->0xffffff7f9aa45fff
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f9a6a3000
            dependency: com.apple.iokit.IONDRVSupport(2.3.7)[38C214C0-83C8-3594-8A4C-DC6AC3FEC163]@0xff ffff7f9a724000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[74E3E50F-E50A-3073-8C96-06F854292A91]@0 xffffff7f9a6e1000
         com.apple.nvidia.nv50hal(8.1)[5F021999-8B18-3BD5-9B98-90617E638A63]@0xffffff7f9 aa53000->0xffffff7f9ad74fff
            dependency: com.apple.NVDAResman(8.1.0)[A26D2A3D-C06F-3A0F-BCFF-901A98C93C3D]@0xffffff7f9a7 38000
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f9a6a3000
         com.apple.GeForce(8.1)[A15BB65E-3501-340F-87CB-2FD2BAD33E35]@0xffffff7f9b882000 ->0xffffff7f9b94efff
            dependency: com.apple.NVDAResman(8.1.0)[A26D2A3D-C06F-3A0F-BCFF-901A98C93C3D]@0xffffff7f9a7 38000
            dependency: com.apple.iokit.IONDRVSupport(2.3.7)[38C214C0-83C8-3594-8A4C-DC6AC3FEC163]@0xff ffff7f9a724000
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f9a6a3000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[74E3E50F-E50A-3073-8C96-06F854292A91]@0 xffffff7f9a6e1000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
12D78
Kernel version:
Darwin Kernel Version 12.3.0: Sun Jan 6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
Kernel UUID: 3EB7D8A7-C2D3-32EC-80F4-AB37D61492C6
Kernel slide:     0x0000000019e00000
Kernel text base: 0xffffff801a000000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 3064164203775
last loaded kext at 299154607765: com.apple.filesystems.smbfs          1.8 (addr 0xffffff7f9c477000, size 229376)
last unloaded kext at 354384336276: com.apple.filesystems.msdosfs          1.8 (addr 0xffffff7f9c469000, size 57344)
loaded kexts:
com.Logitech.Unifying.HID Driver          1.3.0
com.Logitech.Control Center.HID Driver          3.7.0
com.apple.filesystems.smbfs          1.8
com.apple.filesystems.exfat          1.3
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.driver.AudioAUUC          1.60
com.apple.driver.AGPM          100.12.87
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.filesystems.autofs          3.0
com.apple.driver.AppleHDA          2.3.7fc4
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.driver.AppleMikeyDriver          2.3.7fc4
com.apple.GeForce          8.1.0
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.iokit.IOBluetoothSerialManager          4.1.3f3
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.ApplePolicyControl          3.3.0
com.apple.driver.AppleSMCLMU          2.0.3d0
com.apple.driver.AppleUpstreamUserClient          3.5.10
com.apple.driver.SMCMotionSensor          3.0.3d1
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.1.3f3
com.apple.driver.AppleSMCPDRC          1.0.0
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.AppleIntelHDGraphics          8.1.0
com.apple.driver.AppleIntelHDGraphicsFB          8.1.0
com.apple.driver.AppleMuxControl          3.3.0
com.apple.driver.AppleMCCSControl          1.1.11
com.apple.driver.AppleUSBTCButtons          237.1
com.apple.driver.AppleUSBCardReader          3.1.7
com.apple.driver.AppleIRController          320.15
com.apple.driver.AppleUSBTCKeyboard          237.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          34
com.apple.iokit.SCSITaskUserClient          3.5.5
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.3.1
com.apple.driver.AppleFWOHCI          4.9.6
com.apple.driver.AppleAHCIPort          2.5.1
com.apple.driver.AirPort.Brcm4331          614.20.16
com.apple.driver.AppleUSBHub          5.5.5
com.apple.iokit.AppleBCM5701Ethernet          3.6.0b1
com.apple.driver.AppleUSBEHCI          5.5.0
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleEFINVRAM          1.7
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleACPIButtons          1.7
com.apple.driver.AppleHPET          1.8
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.7
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.kext.triggers          1.0
com.apple.driver.DspFuncLib          2.3.7fc4
com.apple.iokit.IOAudioFamily          1.8.9fc11
com.apple.kext.OSvKernDSPLib          1.6
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.AppleSMBusPCI          1.0.11d0
com.apple.nvidia.nv50hal          8.1.0
com.apple.NVDAResman          8.1.0
com.apple.iokit.IOSurface          86.0.4
com.apple.iokit.IOSerialFamily          10.0.6
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.driver.AppleSMC          3.1.4d2
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.1.3f3
com.apple.driver.AppleHDAController          2.3.7fc4
com.apple.iokit.IOHDAFamily          2.3.7fc4
com.apple.driver.IOPlatformPluginFamily          5.3.0d51
com.apple.driver.AppleGraphicsControl          3.3.0
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.iokit.IONDRVSupport          2.3.7
com.apple.driver.AppleSMBusController          1.0.11d0
com.apple.iokit.IOGraphicsFamily          2.3.7
com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.5
com.apple.iokit.IOUSBMassStorageClass          3.5.1
com.apple.driver.AppleUSBMultitouch          237.3
com.apple.driver.IOBluetoothHIDDriver          4.1.3f3
com.apple.iokit.IOBluetoothFamily          4.1.3f3
com.apple.iokit.IOUSBHIDDriver          5.2.5
com.apple.driver.AppleUSBMergeNub          5.5.5
com.apple.driver.AppleUSBComposite          5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.5
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOAHCISerialATAPI          2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.5
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IOAHCIFamily          2.3.1
com.apple.iokit.IO80211Family          522.4
com.apple.iokit.IOUSBUserClient          5.5.5
com.apple.iokit.IOEthernetAVBController          1.0.2b1
com.apple.iokit.IONetworkingFamily          3.0
com.apple.iokit.IOUSBFamily          5.5.5
com.apple.driver.AppleEFIRuntime          1.7
com.apple.iokit.IOHIDFamily          1.8.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220.2
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          345
com.apple.iokit.IOStorageFamily          1.8
com.apple.driver.AppleKeyStore          28.21
com.apple.driver.AppleACPIPlatform          1.7
com.apple.iokit.IOPCIFamily          2.7.3
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
Any suggestions would be greatful,
Thanks,
Marie

Replace the pair of DIMMs first.
Monitor the temps inside.
Install and use SmcFanControl 2.2
Run Apple Hardware Test
You may want to try a clean system install to test with once you have the RAM replaced. Faulty RAM can cause all kinds of issues. And dirty files. Some deeper check for corrupt files than Disk Utility is probably in order.
There is a significant "Inrush-current" on boot and wake from sleep with the 2008s. They need good power, a 1500VA/900W UPS, and sensitive to other equipment on the same circuit.
Inrush current

MBP intermittently restarts when waking from sleep

Similar Messages

Maybe you are looking for