MBP (mid-2009) freezing, slow installations and file transfer

I bought the latest MacBook Pro model and installed Snow Leopard on a cleanly formatted hard drive. I have tried migrating via ethernet and FireWire from my iMac, but the migrations failed either due to freezing (via FireWire after roughly 24 hours of file transfer) or by an error message (ethernet with Migration Assistant).
Only through a Time Machine backup was I able to transfer my account files to the MBP, which again totaled at over 20 hours of transferring. The system was a mess, clogged constantly by freezing and spinning beach balls of death for durations lasting around 10-20 seconds during which music would clip after 5-10 seconds of everything not responding, this being accentuated especially during installations. I decided to format and try anew.
Now I've formatted the hard drive, installed Snow Leopard and will transfer my files manually onto a clean account. Installations take a long time although SL installation is within 30 minutes, iLife took 1.5 hours to install 5 GB. During the installation Safari stopped responding, as did the entire system, and the spinning beach ball would keep spinning. Watching a 480p trailer in Quicktime made the entire computer freeze up (no video/audio) for 10 seconds halfway. Transferring 136 GB (my Music folder) will take around 15 hours according to the estimate after 10 minutes of transferring.
I've sold my iMac now and all I have are the files on my external hard drive. I want to get them onto my MBP ASAP but the slowness is preventing me from doing what needs to be done and it's very frustrating. When I try to boot into Hardware Testing by holding D down the computer doesn't do it no matter what (Application DVD in or not, plugged into power or not). I've tried resetting PRAM but I get the same inaction.
Any ideas?
Edit: I've done Disk Utility to no avail, it finds nothing wrong.

Installed, still getting freezes with spinning beach balls. Transfer says it would take 1 hour opposed to that 15 hours, but it stops transferring after X amount of gigabytes (from 0.5 to 5), not do anything for a while and then continue, stretching the estimate to over 2 hours after some time. I don't know if this is just with the hard drive.
The freeze-ups are frustrating as **** and make for a very poor experience. Any ideas to get to the bottom of this? I still haven't been able to boot into the Hardware Test no matter how much I try.

Similar Messages

MBP mid-2009 Freezing after Hard Drive upgrade -HELP!

So, my Apple Care just ended and I was almost always at a full 320GB, so I decided to upgrade my hard drive to 1TB. I purchased a Western Digital TB drive (9.5mm) at a store recommended by an Apple Genius and followed the instruction on youtube exactly, as well as having another visit to the Genius bar, ensuring I grounded myself often throughout the process. My computer is a 15" MBP originally loaded with Snow Leopard, now running OSX Lion. I did a Time Machine backup prior to everything and also bought an enclosure for my old hard disk to use and it has yet to be wiped, but Disk Utility says that it's corrupt because 1 program's debug log says the number of files changed (after the time machine processing.) I did a Carbon Copy Clone prior to installing the hard drive as well, so when all was done, I was able to start the computer without issue. (This program is what told me first that I had an issue with that debug log. I'd tried to delete a huge folder that was taking up nearly 30GB before the clone, it was backed up on time machine and another backup drive.)
However, after Vuze re-opened (which I'd just recently upgraded to Pro) it froze the computer, so I got the rainbow disk and even Force Quit did not work. Since then, I've had to reboot with the top right button dozens of times. Mail, Chrome and Vuze have all caused freezing and Command Option Escape does not work at all. My beloved computer is starting to feel like a big brick. I uninstalled and re-installed Vuze Plus since, but still have the same issues (trashing the program then re-downloading). As for Disk Utility, it says the drive is just fine. There are no software updates needed and that's about as far as I can get before things crash again.
I would really appreciate any assistance that can be provided based on this scenario. I hope I've provided enough detail, please let me know if more is needed.
Thank you in advance.

The only thing that I can think of is that your SATA cable may be bad... it's the first thing that I would try replacing. DIsk Utility wouldn't be able to detect a bad SATA cable - you'd just have random freezes and crashes.
I don't know that this is the solution to your problem, but it's the first thing I would attempt. 2009 models are notorious for having bad SATA cables - try PowerbookMedic and order a new one. If it doesn't fix the problem, call back.
Good luck,
Clinton

MBP mid 2009, Mountain Lion and PRESONUS FP10

Hello!
I have an opportunity to buy used Presonus FP10, but I am not sure is it completely compatible with my MBP - mid 2009, CORE 2 DUO and Mountain Lion and Logic Pro 9???
It is very good interface but a bit outdated, so I am worried! I don't want to spend my money if it won't work on my MAChine!
Thank you!

Hi, Damon
I gave up from buying it. As I didn't get any valid information about FP, I stopped thinking about it. I've been looking all over the Internet and came up with Focusrite Saffire Pro 40. Somehow, I find it even better choice, so we will see it tomorrow! I hope it is boxed with Firewire Adapter (400-800), too. It is 777 KM which is about 500 $.
Is it worth the money?
If it is compatible with Lion, I assume it should work with ML, too!

Have a MBP mid 2009, had mavericks, changed hard drive and now have 10.6.8 and can't update to mavericks again. Any help?

Hi,
I Have a MBP mid 2009, 8 Gb RAM, had mavericks, changed hard drive to get more space (500Gb) and couldn't restart from time machine so had to install Snow Leopard, now have OS 10.6.8 and can't update to mavericks again. Any help?

You did not contact us. This is just a user to user forum where we try to help each other out. No one here works for Apple and as far as we know Apple do not even come here. Ring back the number you originally called on and ask for an explanation.
Cheers
Pete

HT204291 if i have a mid 2009 mac book pro and an apple tv that is the latest one. i can not mirror the mac book on my tv. is it the fact that my computer is a little older than 2011 models which will work. any info is greatly appreciated

f i have a mid 2009 mac book pro and an apple tv that is the latest one. i can not mirror the mac book on my tv. is it the fact that my computer is a little older than 2011 models which will work. any info is greatly appreciated
chuck schick

Yes. You need 2011 or later in order to mirror as it requires the newer processor. The alternative is airparrot, which does it via software.

Did macbook air mid 2009 running slow with mountain lion?

did macbook air mid 2009 running slow with mountain lion?

Yours is the first computer I've heard about on these forums that is attempting to run Mavericks with only 2GB of RAM.
Indeed that is acceptable per the Mavericks requirements:
http://support.apple.com/kb/HT5842
... but as you may know, Apple has not sold computers with as little as 2GB RAM for quite a while.
I suggest therefore you make sure you remove any applications that may be overtaxing your machine. Examples are browsers other than Safari, Mac cleaning products (such as Mac Keeper), or any other non-Apple app that has some startup process running (such as Outlook).

IChatAV and file transfer over wireless network

Hi there...
I'd like to let you in on my predicament. Firstly, a bit of background.
I decided to buy my folks an old iMac from eBay in Australia - and pay for their broadband connection - so that I could video chat to them from the UK, and they could see my 5 year old son for the first time in 4 years. Cute, eh?
Well, everything was working fine until I decided to go wireless in my home about 3 months ago. I have a static IP address, and purchased a nice new Airport Express to integrate into the system. I allocated my G5 iMac it's own network address (10.0.1.2), and the base station the master address (10.0.1.1). From there, the base station communicates to the router via the static IP... Sound ok?
Anyway - NOW (or, for as long as I can recall), I CANNOT for the life of me send files over the connection. Video chat and audio chat are fine (although OCCASIONALLY it takes a few goes to be able to see THEM on my computer - I think their bandwidth isn't THAT stable at 512Kbps down and 128Kbps up) - however, the correct ports have been unblocked on the OSX firewall AND the Airport Express base station.
And just so that you know it's not the folks' fault - I can't send documents/images over the network to friends I KNOW are competent (or, at least more competent than my parents!). There's always an error message at the receiver's end, and the file I'm attempting to send just times out.
Has anyone any suggestions as to how I might be able to resolve this problem before I expire from old age?!?
Your thoughts are REALLY appreciated!

Hi Ralph
I can see where that might be the case, but file transfer worked flawlessly BEFORE I went wireless using the same modem. The only way to unblock ports on my router is to turn NAT off - it creates a DMZ, so it permits unhindered 2-way traffic...
It's a pretty confusing piece of kit. Maybe I should just get a Netgear anyway!
I have a laptop on the wireless network as well, and file transfer works a treat between it and the iMac. All I can think of is that because I'm now working on a LAN, there's a blockage to get out to the "Real World" - even though it's easy for video to pass through.
I'll check my unblocked ports again, just to be sure. I'm unfamilar with the term "Jabber" - is that what Apple decided to call one of the elements of iChat? Excuse my ignorance...!

Error 1899 on diagnostics and file transfer

Remote view and remote control work fine. Diagnostics and file transfer
give error 1899.

Jody,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Has anyone installed the samsung 840 pro in MBP mid 2009?

Hi All,
My macbook doesnt work anymore because the HDD gave up. I now ordered the samsung 840 pro ssd. My mbp doesn't start up anymore and all I can see is the file boz and a ? mark. I have the CD that came with the macbook. Is it hard to install the software or should I just take it to apple and let them do the job?
Also, I only bought the 128 GB since I cannot afford the 256g. I have a seagate 1 TB external hardrive. Can anyone please tell me what to do to set all downloads and other documents to save in the external so I am not using all the 128 g

JS28,
I installed a Samsung 840 PRO SSD in my Mid 2010 MacBook Pro. It’s not hard to install the software onto your SSD, though it will take some time to do so. I don’t know how much Apple would charge for that service, so the time vs. money tradeoff is something that you’ll need to decide.
If you decide to do it yourself, what you’ll need to do is to boot your MacBook Pro from the grey installation DVD marked “Mac OS X Install DVD” that originally came in the box with your MacBook Pro; to do that, hold down the C key as you power up. Once you’ve booted up from the DVD, you’ll need to run Disk Utility to format your SSD as “Mac OS Extended (Journaled)”. Once it’s been formatted, you can then install the version of Mac OS X that is on that DVD, either Leopard or Snow Leopard. Once your MacBook Pro’s original version of Mac OS X is installed on the SSD, you can then reboot from the SSD, and optionally install the iLife applications from the “Applications Install DVD” — the other grey installation DVD that came with your MacBook Pro.
Next, you’ll need to upgrade or update your OS to Mac OS X 10.6.8, which in turn will allow you to access the App Store, so that you can redownload Mountain Lion for installation. Once you’ve installed Mountain Lion on your SSD, it will then have the Mountain Lion recovery partition installed also.
To ensure that your downloads and documents are saved to your external Seagate HDD, be sure to choose a location on that drive whenever you download a file or save a document. Each application that you use will probably need to be set to download/save to your external HDD, but each of them should remember that external HDD location for future downloads/saves.

Macbook Pro 17 Mid-2009 Freeze during Wifi Time Machine backup

I have a 17" Macbook Pro 17" Mid 2009 model, running ML 10.8.2, 8GB memory. I am backing up the system to an Airport Extreme shared disk with Time machine over Wifi using the 5GHZ band. My system has all-of-a-sudden started locking up completely during backup. No mouse movement, and everything frozen -- even the clock. The only way I am able to back up is directly connecting via ethernet to the AE, or by attaching a USB disk.
The system has been working for over a year to the AE TM, and at first I thought it was OSX 10.8.3, so I wiped out and reinstalled from scratch and the system still locks up on 10.8.0. So far, it's only over wifi. I also tried during my troubleshooting, using Carbon Copy Cloner to a Sparsebundle image over Wifi with the same results.
I can access and copy files from the AFP hosted disks on the AE with no problem. So it seems to be something in Rsync and the Wifi drivers that aren't jiving.
Any ideas?
Thanks in advance

I see nobody is reacting to your problem.
I have (almost) the same problem, but with 10.7.5.
Not only Time Machine freezes up (over WiFi and USB-connected), but also my Music downloads (everything else works fine) to my iPhone 5 (with iTunes 11.1) and also Spotlight (indexing for minutes and then freezes).
All these 3 actions (which usually take longer than anything else) freeze up after 3 to 15 minutes. Never the same, always different durations. Very annoying.
On the other hand: ever since I disabled Spotlight, my MacBook Pro A1286 is as fast as when I bought it in 2009.
This all happened suddenly, out of the blue. No added software, hardware. No changes in prefs.
I had my hardware checked. I have done a memtest. All the tricks in the book. To no avail.
Aopple techs tell me to wait till Maverick......some solution ;-)

Hanging (MBP mid-2009, clean upgrade)

Hi all,
My mid 2009 MBP (8GB Ram) keeps hanging for a few seconds randomly. Console shows this:
1/15/13 8:14:03.000 AM kernel[0]: USBF:
11888.793
AppleUSBOHCI[0xffffff802e807000]::SuspendUSBBus Processing WDH before suspending
1/15/13 8:14:04.000 AM kernel[0]: [0xffffff8042858c00](1)/(5) Device not responding
1/15/13 8:14:04.000 AM kernel[0]: com_apple_driver_AppleUSBCardReaderUMC:: Stop::Controller Reset
1/15/13 8:14:04.000 AM kernel[0]: USBF:
11890.101
AppleUSBOHCI[0xffffff802e807000]::SuspendUSBBus Processing WDH before suspending
1/15/13 8:14:05.000 AM kernel[0]: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833
1/15/13 8:14:05.000 AM kernel[0]: USBF:
11891.244
AppleUSBOHCI[0xffffff802e807000]::SuspendUSBBus Processing WDH before suspending
there are thousands of the *USBOHCI* entries, but every freeze seems to produce the "Device not responding" sequence.
Would appreciate any suggestions. Have checked for processes using excessive CPU/memory; there are none. A full process list is below:
3063
Console
Rahul
6.3
6
66.2 MB
Intel (64 bit)
2954
Activity Monitor
Rahul
2.4
5
16.7 MB
Intel (64 bit)
208
pbs
Rahul
2.0
6
4.5 MB
Intel (64 bit)
4028
Safari Web Content
Rahul
1.3
14
262.9 MB
Intel (64 bit)
161
Microsoft Word
Rahul
0.4
4
113.8 MB
Intel
252
Dropbox
Rahul
0.1
22
70.2 MB
Intel
4966
SophosUIServer
Rahul
0.1
6
11.6 MB
Intel
168
Finder
Rahul
0.1
5
81.4 MB
Intel (64 bit)
149
distnoted
Rahul
0.0
5
4.6 MB
Intel (64 bit)
248
SyncServicesAgent
Rahul
0.0
5
20.8 MB
Intel
159
Google Chrome
Rahul
0.0
34
190.1 MB
Intel
261
Microsoft Database Daemon
Rahul
0.0
3
11.9 MB
Intel
202
Google Chrome Worker
Rahul
0.0
5
54.5 MB
Intel
62
loginwindow
Rahul
0.0
2
28.2 MB
Intel (64 bit)
148
UserEventAgent
Rahul
0.0
3
9.5 MB
Intel (64 bit)
290
CIJScannerRegister
Rahul
0.0
5
6.9 MB
Intel (64 bit)
201
Google Chrome Helper
Rahul
0.0
4
79.2 MB
Intel
4021
com.apple.iCloudHelper
Rahul
0.0
4
5.8 MB
Intel (64 bit)
1905
dbfseventsd
Rahul
0.0
1
172 KB
Intel
4972
QTKitServer-(4028) Safari Web Content
Rahul
0.0
2
3.9 MB
Intel
4025
Safari
Rahul
0.0
15
159.5 MB
Intel (64 bit)
204
Google Chrome Worker
Rahul
0.0
5
32.3 MB
Intel
200
CalendarAgent
Rahul
0.0
5
47.9 MB
Intel (64 bit)
143
launchd
Rahul
0.0
2
1.5 MB
Intel (64 bit)
205
Google Chrome Worker
Rahul
0.0
6
31.3 MB
Intel
1965
helpd
Rahul
0.0
2
2.2 MB
Intel (64 bit)
251
GrowlHelperApp
Rahul
0.0
3
18.7 MB
Intel (64 bit)
269
ShareKitHelper
Rahul
0.0
2
20.0 MB
Intel (64 bit)
183
storeagent
Rahul
0.0
4
9.8 MB
Intel (64 bit)
165
Dock
Rahul
0.0
5
60.5 MB
Intel (64 bit)
194
imagent
Rahul
0.0
4
6.1 MB
Intel (64 bit)
4020
syncdefaultsd
Rahul
0.0
4
12.6 MB
Intel (64 bit)
187
xpcd
Rahul
0.0
2
6.0 MB
Intel (64 bit)
162
Firefox
Rahul
0.0
1
20 KB
Intel (64 bit)
1747
mdworker
Rahul
0.0
5
19.3 MB
Intel (64 bit)
209
AppleSpell.service
Rahul
0.0
3
8.3 MB
Intel (64 bit)
166
talagent
Rahul
0.0
2
13.7 MB
Intel (64 bit)
227
Google Chrome Worker
Rahul
0.0
5
71.7 MB
Intel
270
lsboxd
Rahul
0.0
2
1.9 MB
Intel (64 bit)
184
usernoted
Rahul
0.0
2
3.3 MB
Intel (64 bit)
188
Notification Center
Rahul
0.0
3
13.3 MB
Intel (64 bit)
3928
CVMCompiler
Rahul
0.0
2
3.6 MB
Intel (64 bit)
242
AirPort Base Station Agent
Rahul
0.0
4
2.0 MB
Intel (64 bit)
156
pboard
Rahul
0.0
1
916 KB
Intel (64 bit)
192
accountsd
Rahul
0.0
2
5.2 MB
Intel (64 bit)
253
Lexmark Button Monitor
Rahul
0.0
3
3.2 MB
Intel
4979
com.apple.audio.SandboxHelper
Rahul
0.0
2
4.1 MB
Intel (64 bit)
167
SystemUIServer
Rahul
0.0
8
38.0 MB
Intel (64 bit)
289
Image Capture Extension
Rahul
0.0
2
9.9 MB
Intel (64 bit)
325
PepperFlashPlayer (Chrome Plug-In Host)
Rahul
0.0
4
32.0 MB
Intel
239
AppleIDAuthAgent
Rahul
0.0
3
1.9 MB
Intel (64 bit)
1659
Terminal
Rahul
0.0
5
17.8 MB
Intel (64 bit)
257
Microsoft AU Daemon
Rahul
0.0
2
3.4 MB
Intel
153
fontd
Rahul
0.0
2
4.9 MB
Intel (64 bit)
189
com.apple.dock.extra
Rahul
0.0
2
16.6 MB
Intel (64 bit)
164
Mail
Rahul
0.0
1
20 KB
Intel (64 bit)
254
LxkNetworkServices
Rahul
0.0
5
3.1 MB
Intel (64 bit)
4980
com.apple.audio.ComponentHelper
Rahul
0.0
2
4.5 MB
Intel (64 bit)
229
maspushagent
Rahul
0.0
2
5.1 MB
Intel (64 bit)
186
tccd
Rahul
0.0
2
3.1 MB
Intel (64 bit)
247
SpotifyWebHelper
Rahul
0.0
3
3.3 MB
Intel
179
NetworkBrowserAgent
Rahul
0.0
3
4.5 MB
Intel (64 bit)
3926
cookied
Rahul
0.0
2
2.8 MB
Intel (64 bit)
1782
printtool
Rahul
0.0
2
2.2 MB
Intel (64 bit)
147
cfprefsd
Rahul
0.0
4
6.9 MB
Intel (64 bit)
Thanks!

If you get those resets with no external USB devices connected, then they're apparently caused by an internal malfunction. The device identified as the culprit in the log is the card reader.
Make a "Genius" appointment at an Apple Store to have the machine tested.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed.

Macbook Pro 17" Mid 2009 Freezes completely.

I have a Macbook Pro 17" Unibody Mid 2009 2.8 Ghz 4GB Ram running OS X Lion 10.7.5 . Started noticing the issue when running Safari. Browser would lock up/ freeze. I would have to force quit. Thought it was a webpage issue and tried another browser. Same issue. Just started doing this last Thursday. I ran Apple AHT on it and no issues were found. I have run the disk repair and no issues were found. I believe I have gone through the steps to reset the PRAM, NVRAM and also the SMC. The lock up / Freeze issue will happen even at start up. However if I try to restart again I will have success. Currently the laptop is working as far as getting email. But I am concerned that if I open another app at the same time it will lock up / freeze.

Open the Console in the Utilities folder. Check for entries at the time of a crash and see if there are clues to the cause. If you are getting kernel panics, then post a panic log. Also, give this a try:
Repair the Hard Drive and Permissions - Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
After this is completed download and install OS X Lion Update 10.7.5 (Client Combo).

Macbook pro mid 2009 running slow

okay so i have a macbook pro 15 inch from mid 2009. my hard drive recently crashed and i bought a new 750 gb hard drive and installed mountain lion software. got my computer running but now my computer is constantly acting slow and showing the beach ball a lot. i have barely used any memory on the new harddrive and i am wondering if there is anyway i can fix it or if my computer is running slow because it is older and mountain lion is simply to new for it. also i know that i need to replace my battery but i am not sure if that has anything to do with my computer running slow.

in my activity monitor, the high % CPU are going from google Chrome and Google Chrome Renderer both fluctuating between .7 to 3.7 %CPU.
all fluctuate
%User: 1.50 - 3.25
%System: .75 - 1.25
%Idle: 96 - 98
under system memory:
Page Outs:0 bytes
Swap Used:0 bytes
under Disk Activity:
Reads in/sec: 0
Write outs/sec: fluctuate from 0-10
9/19/12 1:13:16.000 PM kernel: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
9/19/12 1:13:16.000 PM kernel: MacAuthEvent en1   Auth result for: 00:24:b2:da:9f:36 MAC AUTH succeeded
9/19/12 1:13:16.000 PM kernel: wlEvent: en1 en1 Link UP virtIf = 0
9/19/12 1:13:16.000 PM kernel: AirPort: Link Up on en1
9/19/12 1:13:16.000 PM kernel: en1: BSSID changed to 00:24:b2:da:9f:36
9/19/12 1:13:16.000 PM kernel: AirPort: RSN handshake complete on en1
9/19/12 1:13:16.899 PM loginwindow: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
9/19/12 1:13:17.103 PM com.apple.launchctl.LoginWindow: com.apple.findmymacmessenger: Already loaded
9/19/12 1:13:17.181 PM com.apple.SecurityServer: Session 100004 created
9/19/12 1:13:17.184 PM loginwindow: Login Window Started Security Agent
9/19/12 1:13:17.289 PM SecurityAgent: Echo enabled
9/19/12 1:13:17.289 PM SecurityAgent: Echo enabled
9/19/12 1:13:17.311 PM airportd: _doAutoJoin: Already associated to “lions den”. Bailing on auto-join.
9/19/12 1:13:17.426 PM configd: network configuration changed.
9/19/12 1:13:17.455 PM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Probe
9/19/12 1:13:17.455 PM UserEventAgent: CaptiveNetworkSupport:CNSPreferences:60 Creating new preferences
9/19/12 1:13:17.456 PM UserEventAgent: CaptiveNetworkSupport:CaptiveStartDetect:2343 Bypassing probe on lions den because it is protected and not on the exception list
9/19/12 1:13:17.503 PM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Unknown
9/19/12 1:13:17.507 PM configd: network configuration changed.
9/19/12 1:13:17.775 PM WindowServer: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
9/19/12 1:13:18.312 PM com.apple.launchd: (com.apple.xprotectupdater[33]) Exited with code: 252
9/19/12 1:13:19.937 PM ntpd: proto: precision = 1.000 usec
9/19/12 1:13:24.948 PM SecurityAgent: User info context values set for frascoje
9/19/12 1:13:24.948 PM SecurityAgent: User info context values set for frascoje
9/19/12 1:13:25.576 PM SecurityAgent: Login Window login proceeding
9/19/12 1:13:25.576 PM SecurityAgent: Login Window login proceeding
9/19/12 1:13:26.068 PM loginwindow: Login Window - Returned from Security Agent
9/19/12 1:13:26.079 PM loginwindow: USER_PROCESS: 45 console
9/19/12 1:13:26.128 PM airportd: _doAutoJoin: Already associated to “lions den”. Bailing on auto-join.
9/19/12 1:13:26.377 PM com.apple.launchctl.Aqua: load: option requires an argument -- D
9/19/12 1:13:26.377 PM com.apple.launchctl.Aqua: usage: launchctl load [-wF] [-D <user|local|network|system|all>] paths...
9/19/12 1:13:26.886 PM com.apple.launchd.peruser.501: (com.apple.launchctl.Aqua[125]) Exited with code: 1
9/19/12 1:13:27.082 PM UserEventAgent: CaptiveNetworkSupport:CNSServerRegisterUserAgent:187 new user agent port: 23815
9/19/12 1:13:30.417 PM com.apple.dock.extra: Could not connect the action buttonPressed: to target of class NSApplication
9/19/12 1:13:30.420 PM com.apple.dock.extra: 2012-09-19 13:13:30.404 com.apple.dock.extra[158:1707] Could not connect the action buttonPressed: to target of class NSApplication
9/19/12 1:13:30.422 PM com.apple.dock.extra: Could not connect the action buttonPressed: to target of class NSApplication
9/19/12 1:13:30.426 PM com.apple.dock.extra: Could not connect the action buttonPressed: to target of class NSApplication
9/19/12 1:13:30.427 PM com.apple.dock.extra: Could not connect the action buttonPressed: to target of class NSApplication
9/19/12 1:13:30.433 PM com.apple.dock.extra: 2012-09-19 13:13:30.419 com.apple.dock.extra[158:1707] Could not connect the action buttonPressed: to target of class NSApplication
9/19/12 1:13:30.433 PM com.apple.dock.extra: 2012-09-19 13:13:30.425 com.apple.dock.extra[158:1707] Could not connect the action buttonPressed: to target of class NSApplication
9/19/12 1:13:30.433 PM com.apple.dock.extra: 2012-09-19 13:13:30.426 com.apple.dock.extra[158:1707] Could not connect the action buttonPressed: to target of class NSApplication
9/19/12 1:13:30.980 PM [0x0-0x6006].org.videolan.vlc: [0x10020a430] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface.
9/19/12 1:13:33.000 PM kernel: CODE SIGNING: cs_invalid_page(0x1000): p=166[ksadmin] clearing CS_VALID
9/19/12 1:13:37.000 PM kernel: CODE SIGNING: cs_invalid_page(0x1000): p=171[ksadmin] clearing CS_VALID
9/19/12 1:13:41.000 PM kernel: CODE SIGNING: cs_invalid_page(0x1000): p=182[GoogleSoftwareUp] clearing CS_VALID
9/19/12 1:13:42.988 PM com.apple.launchd.peruser.50SharedServices[183]) Exited with code: 1
9/19/12 1:13:46.345 PM com.apple.launchd: (com.apple.coreservices.appleid.authentication[101]) Exit timeout elapsed (20 seconds). Killing
9/19/12 1:14:22.341 PM VLC: Media key event tap was disabled by timeout
9/19/12 1:15:01.443 PM mdworker32: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
9/19/12 1:15:03.165 PM VLC: Media key event tap was disabled by timeout
9/19/12 1:15:03.668 PM com.apple.SecurityServer: Session 100007 created
9/19/12 1:15:38.927 PM VLC: Media key event tap was disabled by timeout
9/19/12 1:15:45.848 PM VLC: Media key event tap was disabled by timeout
9/19/12 1:17:26.000 PM kernel: IOSurface: buffer allocation size is zero
9/19/12 1:25:51.227 PM VLC: Media key event tap was disabled by timeout
9/19/12 1:27:46.000 PM kernel: IOSurface: buffer allocation size is zero
9/19/12 1:27:47.000 PM kernel: IOSurface: buffer allocation size is zero
9/19/12 1:27:47.000 PM kernel: IOSurface: buffer allocation size is zero
9/19/12 1:27:48.875 PM Google Chrome: -deltaZ is deprecated for NSEventTypeMagnify. Please use -magnification.
9/19/12 1:28:14.000 PM kernel: IOSurface: buffer allocation size is zero
9/19/12 1:28:15.000 PM kernel: IOSurface: buffer allocation size is zero
9/19/12 1:28:28.000 PM kernel: IOSurface: buffer allocation size is zero
9/19/12 1:28:50.000 PM kernel: IOSurface: buffer allocation size is zero
9/19/12 1:28:56.194 PM [0x0-0x7007].com.google.Chrome: [253:-1408855360:960929356231:ERROR:webplugin_delegate_proxy.cc(325)] Couldn't send PluginMsg_CreateInstance
9/19/12 1:28:56.194 PM [0x0-0x7007].com.google.Chrome: [253:-1408855360:960929395137:ERROR:webplugin_impl.cc(269)] Couldn't initialize plug-in
9/19/12 1:29:20.000 PM kernel: IOSurface: buffer allocation size is zero
9/19/12 1:36:40.000 PM kernel: IOSurface: buffer allocation size is zero
9/19/12 1:40:13.000 PM kernel: IOSurface: buffer allocation size is zero
9/19/12 1:40:15.000 PM kernel: IOSurface: buffer allocation size is zero
9/19/12 1:44:46.000 PM kernel: IOSurface: buffer allocation size is zero
9/19/12 1:45:03.000 PM kernel: IOSurface: buffer allocation size is zero
9/19/12 1:48:35.218 PM Google Chrome Helper EH: HDDec_Thread_HWSliceDecoder_SampleID: CreateGPUInterface renderer 1040004
9/19/12 1:48:35.221 PM Google Chrome Helper EH: ava error: InitDriver call failed, call DeleteDriver ...
9/19/12 1:48:47.000 PM kernel: Limiting closed port RST response from 352 to 250 packets per second
9/19/12 1:51:46.000 PM kernel: IOSurface: buffer allocation size is zero
9/19/12 1:51:53.062 PM VLC: Media key event tap was disabled by timeout
9/19/12 1:51:55.000 PM kernel: IOSurface: buffer allocation size is zero
9/19/12 1:55:27.000 PM kernel: IOSurface: buffer allocation size is zero
9/19/12 2:24:40.000 PM kernel: MacAuthEvent en1   Auth result for: 00:24:b2:da:9f:36 MAC AUTH succeeded
9/19/12 2:24:40.000 PM kernel: wlEvent: en1 en1 Link UP virtIf = 0
9/19/12 2:24:40.000 PM kernel: AirPort: RSN handshake complete on en1
9/19/12 2:24:40.000 PM kernel: wl0: Roamed or switched channel, reason #8, bssid 00:24:b2:da:9f:36
9/19/12 2:24:40.000 PM kernel: en1: BSSID changed to 00:24:b2:da:9f:36
9/19/12 2:40:56.289 PM Mail: Using V2 Layout
9/19/12 2:41:03.488 PM com.apple.mdworker.pool.0: I/O
9/19/12 2:41:03.490 PM com.apple.mdworker.pool.0: error : encoder error
9/19/12 2:41:24.000 PM kernel: IOSurface: buffer allocation size is zero
9/19/12 2:42:20.000 PM kernel: MacAuthEvent en1   Auth result for: 00:24:b2:da:9f:36 MAC AUTH succeeded
9/19/12 2:42:20.000 PM kernel: wlEvent: en1 en1 Link UP virtIf = 0
9/19/12 2:42:20.000 PM kernel: wl0: Roamed or switched channel, reason #8, bssid 00:24:b2:da:9f:36
9/19/12 2:42:20.000 PM kernel: en1: BSSID changed to 00:24:b2:da:9f:36
9/19/12 2:42:20.000 PM kernel: AirPort: RSN handshake complete on en1
9/19/12 2:45:26.000 PM kernel: IOSurface: buffer allocation size is zero
9/19/12 2:45:52.000 PM kernel: IOSurface: buffer allocation size is zero
9/19/12 2:46:15.000 PM kernel: IOSurface: buffer allocation size is zero
9/19/12 2:51:07.198 PM com.apple.mdworker.isolation.0: syntax error, unexpected DICTSTART.
9/19/12 2:51:07.198 PM com.apple.mdworker.isolation.0: failed to parse embedded CMap.
9/19/12 2:51:07.202 PM com.apple.mdworker.isolation.0: syntax error, unexpected DICTSTART.
hopefully that works not exactly sure what i am looking for in the console.
<Edited By Host>

Macbook air mid 2009 very slow

Hello,
I recently bought a Macbook Aid mid 2009 with 2 GB ram, 120GB Sata and 1.86GHZ Core2Duo.
I'm running on OS X 10.9.3 since I bought it.
The laptop is loading very slow many times and I noticed 'kerner_task' taking alot of CPU and RAM.
I'm wondering if my laptop is not good enough for OS X 10.9.3 (this is my first Mac).
Ia there anything I can do?
Thank you

Yours is the first computer I've heard about on these forums that is attempting to run Mavericks with only 2GB of RAM.
Indeed that is acceptable per the Mavericks requirements:
http://support.apple.com/kb/HT5842
... but as you may know, Apple has not sold computers with as little as 2GB RAM for quite a while.
I suggest therefore you make sure you remove any applications that may be overtaxing your machine. Examples are browsers other than Safari, Mac cleaning products (such as Mac Keeper), or any other non-Apple app that has some startup process running (such as Outlook).

MBP Mid 2009 - Repair Battery Message

Hi everyone.
I have a Mid 2009 MBP running with Lion. I've notice a message that says "Repair Battery" under system preferences/battery.
I didnt noticed anything strange with my battery life, but I want to know if I have to do something.
Anyone got hint??
Thanks

Guess what. I decided to reboot the system, format the HD, and reinstall everything. Im now on Lion again, and the "service baterry" message has disappear.
My baterry now claims:
Battery Information:
Model Information:
Serial Number:          W0947B66C77YC
Manufacturer:          SMP
Device Name:          bq20z451
Pack Lot Code:          0
PCB Lot Code:          0
Firmware Version:          3
Hardware Revision:          3
Cell Revision:          100
Charge Information:
Charge Remaining (mAh):          4402
Fully Charged:          No
Charging:          No
Full Charge Capacity (mAh):          5209
Health Information:
Cycle Count:          346
Condition:          Normal
Battery Installed:          Yes
Amperage (mA):          -1182
Voltage (mV):          11817

MBP (mid-2009) freezing, slow installations and file transfer

Similar Messages

Maybe you are looking for