MBP missing first letter still missing after firmware upgrade

hahahaha
I have been waiting for... this?
I still miss as many first letters intermittently, particularly on the first word in a field or after a delay...
Great, just great. I can't wait to re-sell this MBP like I do every year, to pay half of the cost of a new one... I'll just wait until something better comes up for keyboards, mind you.

Just wanted to say it's the same for me... -.-
Maybe it's a bit more rare after the firmware update, but it definitely happens.

Similar Messages

  • C5 still rebooting after firmware upgrade

    I recently upgraded to 032.010, but turning on the radio makes the phone reboot just as it did prior to upgrading. I had a theory that only certain frequencies provoked this reaction, but now I've started experiencing it on frequencies which previously did not provoke a reboot. Anyone else having this problem? If you haven't used the radio yet but plan to, I suggest you try it ASAP, in case you experience the same issue as me and want to return your phone.

    I forgot to mention that I've previously bought three C5's (from different shops, in case the problem was limited to one batch) and returned all of them because they all behaved this way. Bought the 4th (which has a different production code, so that can't be it either) when I saw there was a firmware upgrade available, hoping it would solve the problem, but it didn't. Now it even reboots on frequencies that did not provoke a reboot on the previous firmware, although I can't say for sure the upgrade is responsible. Anyway, this is definitely not a unit specific issue, it's the whole series that is faulty (or at least the Scandinavian model). Quite annoying, as I'm otherwise perfectly happy with the C5.

  • YouTube icon missing after ios6 upgrade

    YouTube icon missing after ios6 upgrade

    D-fest,
    I was upset about the YouTube app as well, and my initial impressions were that the Apple YouTube app was better, but after using it a bit I realized the Google YouTube app was actually better. Some of the features are initially not obvious (in this case it was a matter of what I was used to), but they are all there and more. It seems to generally work better too.
    I don't stream an awful lot, but I have not experienced any wifi drops while doing so yet.
    doug

  • SunRay 2FS DTUs dead after Firmware upgrade?

    Hi everyone,
    although I am fairly experienced in Solaris this whole Thin Client business is a bit of unchartered territory to me as of yet... following situation:
    I got 2 SunRay 2FS DTUs and I have a vanilla PC setup with Solaris 10 U6 for x86. Installation was smooth except for the onboard NICs - I had to locate and manually install the appropriate drivers (skge). Installed SRSS 4.1, no problems, made a basic configuration (skge0: standard LAN, skge1: SunRay LAN with the standard 192.168.128.0/24 network). Installation told me DTUs would be firmware-upgraded after next power-cycle. Fired up the first DTU, it displayed the firmware upgrade OSDs and power-cycled - so far so good. But after the power cycle nothing happened - LED on the front is green so obviously POST is okay but the OSD constantly display status "1" (waiting for ethernet link to come up) and nothing else happens. Link lights on the NIC are on, when I send packets on the skge1 network (pings) they even flash, so I assume it's not the cables. Strangest things of all: I tried DTU 2 and the exact same sequence happened - so I am sitting here with 2 dead DTUs - any chance of reviving them? I scoured the 'net for information but I got no description that was even close to my problem...
    Kind regards from Germany,
    Henning

    after installing sun ray server remember to:
    1) utadm
    2) utconfig
    http://docs.sun.com/source/819-2383/config.html#59570 <- old but right

  • T410i SSD user and master password problem after firmware upgrade

    Hello.
    I have problem with my Corsair Force 3 120GB SSD. After firmware upgrade of SSD my master and user HDD passwords are no longer valid. I'm stuck on BIOS screen and cannot unlock my SSD. After firmware upgrade procedure i got BSOD. Same happened during firmware upgrade on my previous SSD (INTEL X25-M 80GB) but after restart everything was OK. Please help!
    Previous firmware version: 1.3
    Current firmware version: 1.3.3
    SSD connected to another computer shows RAW partition data, but firmware version is 1.3.3 - seems like update was successful.

    My X301 Intel x18 got bricked also after a BIOS update then secure erase (was going to sell it). I plugged it to a USB kit and onto a desktop and it was recognised and able to format. But plugging it back to the lenovo it is still a brick. My lucky star there was warranty it was replaced by lenovo.
    You may want to try it and extract the data, if it works. And hopefully you can still format it and made it work pluggin back to the lenovo.

  • PC-Suite sync fails after Firmware upgrade of E65

    After firmware upgrade of E65 PC-Suite stops syncing Calendar & Contacts from outlook. No error messages, just "0 entries has been updated".
    - PC-Suite updated to 7.0.9.2
    - Outlook 2003
    - XP Prof.
    Any ideas?
    Solved!
    Go to Solution.

    The funny thing is - the notes are synced???? If I restore some old contacts they'll double up in outlook, so I think the problem is, that the sync app doesn't see the outlook contact & calendar folder.
    Does somebody has an idea?

  • Why does the old iphoto library still remain after the upgrade? Takes up HUGE space on my laptop

    Why does the old iphoto library still remain after the upgrade? Takes up HUGE space on my laptop

    Why does the old iphoto library still remain after the upgrade? Takes up HUGE space on my laptop
    Actually, it only looks like it takes up additional space. The file size shown is misleading.  When you migrate an iPhoto library to Photos, both libraries will show the media files using hard links. The actual file content of the image files and videos is shared by hard links:
    See this linked document:   Photos saves disk space by sharing images with your iPhoto or Aperture libraries - Apple Support
    You will gain no free storage at all by deleting either the iPhoto Library or the Photos library.  So keep both libraries until you are very sure, that Photos is working well  on your Mac and your iPhoto library has been migrated correctly. Also, check, if you like the workflow in Photos. It is very different from iPhoto and some iPhoto features are not supported.
    There will be no easy way back to iPhoto, if you delete your iPhoto library or the iPhoto application. Apple does not sell it any more.

  • I have a new iphone 5s with ios 7 , I cannot pair with the bluetooth in my BMW with idrive , can anyone help . My old iphone 4 worked fine , however this was initially paired with older software , but still worked after the upgrade

    I have a new iphone 5s with ios 7 , I cannot pair with the bluetooth in my BMW with idrive , can anyone help . My old iphone 4 worked fine , however this was initially paired with older software , but still worked after the upgrade . I have tried & tried to pair again & that wont work either , suggesting it is the phones software . Can anyone help please

    Hi there soulboycraney,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Troubleshooting Bluetooth connections
    http://support.apple.com/kb/TS4562
    iOS: Troubleshooting car stereo connections
    http://support.apple.com/kb/ts3581
    -Griff W. 

  • Crippled 192.168.1.1 page after firmware upgrade

    hi,
    i recently upgraded the firmware of my WRT160N V2 to 2.0.03.
    but since then when i login i get a crippled page on 192.168.1.1 with not even a menu. so i cant even downgrade. is there something i can do?

    It is good to know that the issue is resolved
    After firmware upgrade it is always recommended to reset and reconfigure the router and I think that is why you were unable to see the menu on the setup page of your router.

  • Calendar missing after leopard upgrade

    I have 7 different calendars in iCal, but after upgrading to Leopard I'm missing one. I can still see the name of this specific calendar as a .ics file under Libary-Calendars, but it doesn't show when I open iCal. I tried deleting the cache file but this hasn't fixed my problem. TX!

    I got the same problem (one missing Calendar) when upgrading from 10.3 to 10.5.
    To get it back again, open iCal and drag the calendar file into the "CALENDARS" list (left hand pane). That should do the trick.

  • Q10 - Outlook contacts missing after software upgrade

    Hi there,
    I have an executive at my company who upgraded to the Q10.  It started to freeze when she went to her calendar.  I rebooted the device, checked for software updates and upgraded using the latest available software release.  After that upgrade, all of her outlook contacts disappeared.  Is there a known issue as some forums tell you to delete social media connector and a few other steps.  Is this a known issue....is there a proper process to follow to get this resolved?  Thankfully, I'm still using the Bold 9900 and was going to upgrade to the Q10 but it seems that there are a lot of bugs still in the new release.

    you should know that it is better to backup with the nokia pc suite. you are not the first who had this or similar problems after restoring a backup that was made by the phone itself.
    you can only try to restore the backup again. i dont know if there is another way to get your contacts out of the backup-file.
    you could also try to open the backup-file with a hex-editor on pc to search for the contacts. dont know if this could work
    @at all: does a software exist to open such a backup-file on the pc? is it archived by a known software?Message Edited by okidal on 02-Sep-200712:00 AM
    V21.0.025 » 04-09-2007 » RM-356 5800 XpressMusic » Language pack 01

  • Bridge Browser icon missing after the upgrade to OS2

    I have suddenly realised that the Bridge Browser icon has been missing from my PlayBook after the Upgrade to OS2. My service provider data plan supports browsing and I use to do that earlier on OS1. Now a days, since I am mainly using Mifi device...did not use Bridge Browser....BUT suddenly realised that this icon is missing.....
    Any idea what I need to do to get that icon back on PlayBook? and also use it....

    It's really funny...The OS2 manual says that there will be an icon for Bridge Browser....but in reality...you do not require any separate bridge browser icon...Browser main icon works for both...wifi connection as well as bridge connection....
    I am surprised, why RIM has not highlighted this fact in its OS2 manual.....
    Anyways....my problem is resolved....

  • I tunes is missing after last upgrade help! Please

    After last upgrade I noticed ITunes App is not on iPad.  How do I get it back?  I tried to download it again but all I get is it comes loaded on iPad.  Can anyone help me.  Thank you

    Home Screen: Missing App Store, FaceTime, iTunes or Other Icon

  • B&O Equalizer Software missing after the upgrade to windows 10

    After the upgrade to windows 10, the pre installed B&O Equalizer software is missing. Besides after i installed the audio driver provided by Hp Support , the sound quality and the level are degraded.
    I am unable to find the software. Help

    Hi  ,
    Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community!
    I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP Pavilion 15-ab029tx Notebook and issues with Bang & Olufsen Equalizer Software. Try using the Windows Update Troubleshooting tool to fix the problem.Here is a document that shows how to update drivers that are not working correctly with Windows 10.I hope this helps. Thanks.

  • ZenV Plus STILL stuck in recovery mode after firmware upgrade

    =Hi there,
    My ZenV plus opened in recovery mode for no apparent reason... I have tried every option to try to fix it, including downloading and installing the firmware upgrade - this generated a message saying the upgrade was successful but the player will still only start in Recovery Mode after trying to reboot it. So what do I do next? Thanks in advance for any and all helpful suggestions.

    AHi,
    Can you please try resetting the ZEN V Plus to see if it helps?
    To reset the player, use a pin to press the reset button.
    Did this happen out of the blue?
    Do you have any contents in the player? If you do, please remove them to see if the player is booting up properly.

Maybe you are looking for

  • Can i use DLL file created by Fortran with the call libary function node

    Can i use a DLL created by Fortran (Compaq Visual Fortran) with the call library function node in labview. If yes how do i create the DLL file if i have the Fortran code. Thanks

  • Share photos over iphone problem - possible improvement to iOS.

    Hi,  I haver an ipad mini and usually Share photos to a friend iphone. I found out that the sync of shared photos over icloud uses 3G/data plans and it is not possible to disable this (or is it? How?). This is a problem because when several friend sh

  • How to load image to midlet using SUN ONE Studio 4, ME?

    Hi, everyone: I'm trying to load an image to my midlet using Sun ONE Studio. Image image = null; try image = Image.createImage("/Duke.png"); }catch (Exception ex) {} ImageItem item = new ImageItem(null,image,ImageItem.LAYOUT_CENTER,null); append(item

  • Powerbook G4 (12" aluminum" won't start up (freezes with apple screen up)

    I'm on the road, and my Powerbook freezes during startup, with the apple on the white background, but no pinwheel. Tried starting in "Safe Mode", and it got to the pinwheel, then process bar/startup, but froze afterwards before the desktop came up. T

  • PSE5 installation on Windows 7

    I have recently gotten a new laptop with Windows 7 installed on it, and when I try to install my PSE5 directly from the CD that I purchased back in 2007 the installation fully completes, but whenever I try to access the Editor (whether from the PSE5