Mbp retina processor choking (?) after wake from sleep

Hi all,
I recently bought a Macbook Pro Retina Display 15" (Haswell). Some time ago I started noticing that, after waking up the computer for a couple of times, the image and sound would briefly 'freeze' once every second. Strangest thing is that whenever I play back a system soundfile (like f.i. the submarine notification sound) while (let's say) youtube is playing a video, the freezing would go away only to return when I stop playing the notification sound.
Anybody got any idea of what's going on here? Hardware or software failure? Anyone encountered a similar problem?
Here you can see a little video I recorded when my rMBP starts tripping
Cheers
I

happened again just now. opened activity monitor and saw coreaudiod peaking at 54%. changed the driver to soundflower and video stopped lagging ... back to internal input and video started lagging again. I then plugged in my headphones and the freezing stopped immediately.
so been looking at this thread on coreaudiod and followed the instructions. let's hope my problem is solved

Similar Messages

BUG: Sandisk USB flash drive in "half-mounted" state after wake from sleep

My Sandisk Cruzer Crossfire 4GB Flash Drive is left in a half-mounted state after wake from sleep. The Finder believes the drive is still mounted, the icon is on the Desktop. However opening a file on the drive, or trying to eject the drive, results in a long beach ball, followed by a message that I removed the drive without Ejecting it first. The same drive continues to work fine on my Tiger machine, and on PCs.
Bug Report:
Setup:
Macbook 1st Gen (2.0 Ghz)
Mac OS X Leopard 10.5 Clean Install
Sandisk Cruzer Crossfire 4GB USB Flash Drive (in either port)
Repro:
Plug in the drive.
Close the MacBook to put it to sleep
Reopen the MacBook
Result:
The lights on the flash drive never light back up after wake from sleep. Navigating the drive, or trying to eject it results in a "you removed the device without ejecting it first" message.
Expected:
Drive should still be mounted and accessible after waking back up.

It may be a design flaw in the device. Mac OS X does a lot more power management than most other OSes, including tearing devices down to little or no power during sleep. It is possible that the device simply misbehaves due to corrupted memory state or reports a substantially different GUID or something similarly bizarre upon wake. (Okay, that last one wouldn't technically be a power management issue....)
If it doesn't have any problems except when sleeping the system, I would just make sure I unmounted it before putting the machine to sleep and wouldn't worry about it. Maybe check with Sandisk to see if they have a firmware updater for the device.

My Mac Pro loses network connection after wake from sleep since Yosemite upgrade.

Mac Pro loses network connection after wake from sleep since Yosemite upgrade. Any one have this issue as well. And is there a work around?

Wi-Fi?
Wi-FI connection drops
Wi-Fi Problems in OS X Yosemite
Wi-Fi Problems in OS X Yosemite (2)
Wireless Diagnostics
Also try turning off Bluetooth.
Troubleshooting Wi-Fi issues in OS X
Wireless Connection Problems - Fix
Wireless Connection Problems - Fix (2)
Wireless Connection Problems - Fix (3)
Wireless Connection Problems - Fix (4)

Left USB-Port dead after wake from sleep. Just restart helps.

I hoped Apples keyboard-Update today would solve my biggest hate-bug in this buggy POS called Leopard. It didn't.
As usual on my Leopard-Macbook Pro, no device will work on the left USB-Port after I waked the computer from sleep. Just a restart helps. I hoped this update to solve this, because it replaced among others "IOUSBFamily.kext".
Terminal gives a timeout error for the internal USB-Hub after wake from sleep. I assumed this should be related.
I'm really angry now.
When will Apple solve the most urgent problems in Leopard?
Was 10.5.1 just smoke and mirrors to make (fool people into...) people upgrade who intended to wait until the first maintenance-update?
Was Leopard Apples attempt to make Windows-Users more comfortable by putting in some heavy extra-bugs and blue screens?
FIX IT FINALLY! And f... don't wait for Macworld to release 10.5.2. It's desperately needed and the current state of Leopard will leave some people very sad at christmas after getting their first Mac. First impression counts and many more peoples first contact with the Mac will be at christmas...

Apple knows the problem and for some reason they are stumped on fixing it. this is so bad I can't believe it. On my macbook pro with Leopard installed, USB left port is dead after sleep. Only restarting can power it back up. I have to restart every day to use my external hard drive for time machine or when putting my flash drive in the port.
Come on already Apple. This is a SERIOUS, SERIOUS problem.
Fix it.

Slow Wi-Fi Reconnect After Wake from Sleep (Macbook Pro Retina Mid 2012)

Hello!
I'm not sure if anyone has experienced this problem, maybe someone out there can help.
The issue I'm having is with Wi-Fi taking a long time to reconnect after my Macbook Pro Retina wakes from sleep. Usually I need to go and reselet the network.
I've gone through some trouble shooting forums and have had no success. I've tried turning off Wi-Fi and turning it back on after a couple minutes and it turns on right away.
Has anyone experienced this problem?
Regards
CJ.

Hello!
I'm not sure if anyone has experienced this problem, maybe someone out there can help.
The issue I'm having is with Wi-Fi taking a long time to reconnect after my Macbook Pro Retina wakes from sleep. Usually I need to go and reselet the network.
I've gone through some trouble shooting forums and have had no success. I've tried turning off Wi-Fi and turning it back on after a couple minutes and it turns on right away.
Has anyone experienced this problem?
Regards
CJ.

Password not required immediately after wake from sleep

Every once in a while when my retina macbook pro wakes from sleep I do no need to enter my password immediately. Instead it just starts with no password required and then 5-10 seconds later it takes me to the lock screen and asks for my password. Other times it will ask for my password, start up after its entered and then 5-10 seconds later it takes me back to the lock screen and asks for my password again. Usually when it "takes me back to the login screen" it actually just makes the screen black until I press a key or move the mouse and then it "wakes up" again and shows the login screen.
Also is it common for it to hang for a while before allowing me to type my password after waking from sleep? Frequently it will take 10+ seconds before I can start typing in the password field or the clock updates etc. Its a 2.3ghz core i7 with 16GB of ram.
I have installed all updates and it should be noted that I do have the "require password immediately after sleep or screen saver begins" option enabled in system preferences.

Hi Kevin,
You mention that you moved the TC's network up in priority, so you may have already done these things as well. Apologies in advance if that is the case.
If you normally use your MBP with wireless, make sure that the AirPort connection is that top of the connections list in System Preferences > Network. Click on small gear icon at the bottom of list to put the Airport connection first in line to connect so the MBP will not look for an ethernet connection first.
Click on the Airport connection to highlight it and then click Advanced. If you have other wireless networks that you can delete, use the - (minus) button to do so. Ideally, you'll only have a few networks displayed. Confirm that your wireless network name is first at the top of this network list.
Make sure there is a check mark next to Remember Networks Joined. Leave the next two check boxes blank.
Any help? My MBP connects consistently and quickly with these settings when the cover is opened.

Crashes after wake from Sleep after 10.8.1 update

2.5 Ghz Mac Mini (mid 2011), 8 Gigs of RAM
Since the day I upgraded to 10.8.1 I have had persistent crashes, 1 every 24 hours or so. It's always shortly after a wake from sleep. In all cases, it is impossible to switch to a random open application. But once I hit that application, no other application will respond to anything, including a Force Quit, or if it will force quit, it won't relaunch. A shut down will hang because an app refuses to quit. I can quit the Finder, but it won't relaunch. Have reinstalled Mountain Lion twice, zapped the PRAM, reset the SMC, checked and extensively tested the HD and RAM. Replaced RAM with original Apple RAM. Didn't help, so I swapped back to the RAM from Crucial. I can't think of anything else to try. Machine does not crash unless it has been asleep. Runs flawlessly when sleep is disabled. After a reboot (usually via a shut down via the power switch, start from scratch, check of the HD integrity, and then a clean restart) the machine will run fine, sleep and wake normally for about 24 hours. As near as I can tell from the logs, the hangs usually begin right after the Time Machine Backup after a wake from sleep finishes. If I don't allow the machine to sleep, there are no problems of any kind. Making me crazy. Did not occur under Lion or the .0 version of Mountain Lion. Is making me crazier than I normally am which is sorta serious.

Any solutions to this problem? I too have this kernel panic, however it only happens about once a week. Always upon wake from sleep as you've indicated.
FYI I don't have intego software, or an APC installed. Nor am I using filevault.
This is on an up to date, MacBook Pro Retina.
Robert

After Lion upgrade, having network issues after wake from sleep

After upgrading to Lion from 10.6.8 on my MacBook Pro (15-inch, Early 2011), I am unable to connect to the Internet after the computer wakes from sleep. I should rephrase this - I am able to ping IP's and DNS (DNS servers are present) however none of my apps will connect (Safari, iChat, etc) -> they all indicate the Internet is unavailable. I have two Airport Express's running 7.5.2 extending a WiFi network off an Airport Extreme running 7.5.2. This issue is specific to waking from sleep. Any thoughts or suggestions would be appriciated.

It's definitely linked to Time Machine and backups.
I think If I put my machine to sleep/close the lid and Time Machine happens to be performing a backup, when I open the lid again, the network connection is lost and I receive a bunch of errors about the backup disk being unavailable.
This means that if my mbp isn't in the middle of a backup when I put it to sleep, wifi comes back up without a problem.

Abnormal Start-up Screen Appearing after wake from Sleep Restart

I have started to have this problem with my MacbookPro where I will come back and wake try and wake from sleep and nothing. The computer is off or unresponsive. Upon restart I get an abnormal start up screen which looks like this image that I snagged with my camera:
http://www.creativetantrum.com/screen.jpg
In all my years of using a Mac I have never seen anything like this. And the MBP never gets pass the screen I have to hard restart and it launches into this screen:
http://www.creativetantrum.com/startup.jpg
and runs through to the login screen.
Previously I have tried resetting the PRAM and SMC(?) as well as running Cocktail on the machine. Those sequences seemed to resolve the issue for at least a day. The only thing I have done that I can think may have caused this is I play a game called "Ouba" that runs in 640 x 480 or some low resolution that the MBP seems to resemble upon restart.
Also upon restart I am given an opportunity to send Apple a message regarding the crash. Here is what it sends:
panic(cpu 0 caller 0x001A49CB): Unresolved kernel trap (CPU 0, Type 14=page fault), registers:
CR0: 0x8001003b, CR2: 0x5f5e1a64, CR3: 0x01334000, CR4: 0x000006e0
EAX: 0x00006739, EBX: 0x0040d4c1, ECX: 0x00000320, EDX: 0x00006720
CR2: 0x5f5e1a64, EBP: 0x47e93b58, ESI: 0x5f5e1a64, EDI: 0x00000006
EFL: 0x00010006, EIP: 0x0037f240, CS: 0x00000008, DS: 0x00000010
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x47e93888 : 0x128d0d (0x3cc65c 0x47e938ac 0x131f95 0x0)
0x47e938c8 : 0x1a49cb (0x3d2a94 0x0 0xe 0x3d22b8)
0x47e939d8 : 0x19b3a4 (0x47e939f0 0x0 0x47e93a08 0x131f48)
0x47e93b58 : 0x37f719 (0x109380 0x5f4e6000 0x0 0x9)
0x47e93c18 : 0x1ac378 (0x3190ca1e 0x2304 0x0 0x120)
0x47e93c48 : 0x61a3ce (0x61a1ae 0x3 0x64b160 0x0)
0x47e93ca8 : 0x60f446 (0x65d8600 0x2 0x47e93c7c 0x0)
0x47e93cc8 : 0x3ac373 (0x6632300 0x4b063c 0x3 0x4ef000)
0x47e93d08 : 0x3bb728 (0x65d8600 0x3f2688 0x6608f48 0x3920b5)
0x47e93d48 : 0x394a8f (0x6608b00 0x4 0x1d 0x2)
0x47e93d88 : 0x394fc5 (0x6608b00 0x0 0x47e93dc8 0x0)
0x47e93da8 : 0x395ea4 (0x6608b00 0x654fc00 0xb 0x1)
0x47e93de8 : 0x394fee (0x6608b00 0x6651780 0x47e93e28 0x0)
0x47e93e08 : 0x395ea4 (0x6651a80 0x654fc00 0xb 0x1)
0x47e93e48 : 0x394fee (0x6651a80 0x6695200 0x47e93e88 0x0)
0x47e93e68 : 0x395ea4 (0x6695e80 0x654fc00 0xb 0x1) Backtrace continues...
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AppleACPIPlatform(1.0.10)@0x60e000
dependency: com.apple.iokit.IOPCIFamily(2.2)@0x5fa000
dependency: com.apple.iokit.IOACPIFamily(1.2.0)@0x60a000
Kernel version:
Darwin Kernel Version 8.11.1: Wed Oct 10 18:23:28 PDT 2007; root:xnu-792.25.20~1/RELEASE_I386
Model: MacBookPro3,1, BootROM MBP31.0070.B07, 2 processors, Intel Core 2 Duo, 2.2 GHz, 4 GB
Graphics: GeForce 8600M GT, GeForce 8600M GT, PCIe, 128 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR2 SDRAM, 667 MHz
Memory Module: BANK 1/DIMM1, 2 GB, DDR2 SDRAM, 667 MHz
AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x87), 1.3.5
Bluetooth: Version 1.9.5f4, 2 service, 1 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
PCI Card: pci168c,24, sppci_othernetwork, PCI Slot 5
Serial ATA Device: FUJITSU MHW2160BHPL, 149.05 GB
Parallel ATA Device: HL-DT-ST DVDRW GSA-S10N
USB Device: Built-in iSight, Apple Inc., Up to 480 Mb/sec, 500 mA
USB Device: Apple Internal Keyboard / Trackpad, Apple Computer, Up to 12 Mb/sec, 500 mA
USB Device: IR Receiver, Apple Computer, Inc., Up to 1.5 Mb/sec, 500 mA
USB Device: Bluetooth USB Host Controller, Apple, Inc., Up to 12 Mb/sec, 500 mA
Any help would be fantastic.
Thanks.

the settings are done via Terminal commands or through a widget (i know there is "deepsleep" and i think another)
you should be able to find the terminal command through reading about the different sleep modes, if not try goggling "changing sleep mode on mac" and that should show you. if you cant find it let me know and ill try to dig it back up.
the MBPs are standard with safe sleep, the older lap tops used quick sleep. there is not way to change them through the standard system in a GUI, it has to be done via code (very easy because you can just copy and paste it in)
-matt

Connection Lost After Wake From Sleep

I am using a Macbook Pro and Linksys WRT150N W/L router. Every time my MBP wakes from sleep, I lose my internet connection. My menu bar still shows that I'm connected to the network, but I lose all connectivity. I cannot connect to internet or my router settings unless I do a complete restart. Network preferences shows connected to network but no connection to my router IP address under TCP/IP tab in the advanced settings. I also have a drop out of signal a few times an hour. My iMac DV does not experience the drop outs or connection loss at anytime. I have reset my router numerous times and used default factory settings all with the same results. Does anyone have an idea what the problem may be? Thanks.

I was always experiencing drop outs as far as what my signal was showing in my menu bar. It would drop out even if I was on top of my router. I had upgraded to 10.4.11 and the day after I did that, the problems started. I thought I might as well upgrade to 10.5 to see if that might help it. I think the 10.4.11 had done something to my W/L card and upgrading to 10.5 wouldn't have helped it unless I upgraded from 10.4.10 to 10.5, skipping 10.4.11 all together. I'm gonna bring my router and MBP into the genius bar and see what they can tell me about. Thanks for replying. I'm glad and sad to hear that I'm not the only one experiencing these symptoms.

Coreaudiod crashes after wake from sleep

Hello,
My iMac crashes everytime it wakes from sleep within a minute from logging back into the computer. The problem stems from coreaudiod everytime. Here is the last crash log:
Interval Since Last Panic Report: 719204 sec
Panics Since Last Report:          1
Anonymous UUID:                    8F3A4A20-4FF0-4200-940A-F3CA4EBE6CEC
Thu Sep 6 07:26:20 2012
panic(cpu 0 caller 0xffffff8005ab7b95): Kernel trap at 0xffffff7f86bd2ae3, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000047000000058, CR3: 0x000000005102b04a, CR4: 0x00000000000606e0
RAX: 0x0000047000000000, RBX: 0xffffff802eb9d410, RCX: 0x0000047000000000, RDX: 0xffffff80280ee701
RSP: 0xffffff81ccbebaa0, RBP: 0xffffff81ccbebac0, RSI: 0xffffff802eb9d410, RDI: 0xffffff80280ee7e0
R8: 0x0000000000000000, R9: 0x0000000000000000, R10: 0x00000000000010bc, R11: 0x0000000000000206
R12: 0xffffff81ccbebc18, R13: 0x00000000e00002f0, R14: 0xffffff80268b8000, R15: 0xffffff8027f22500
RFL: 0x0000000000010207, RIP: 0xffffff7f86bd2ae3, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000047000000058, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff81ccbeb740 : 0xffffff8005a1d5f6
0xffffff81ccbeb7b0 : 0xffffff8005ab7b95
0xffffff81ccbeb980 : 0xffffff8005ace4ad
0xffffff81ccbeb9a0 : 0xffffff7f86bd2ae3
0xffffff81ccbebac0 : 0xffffff7f86bcc8b3
0xffffff81ccbebae0 : 0xffffff7f86bcdb6b
0xffffff81ccbebb20 : 0xffffff8005e47b6a
0xffffff81ccbebb80 : 0xffffff7f86bcd41a
0xffffff81ccbebbc0 : 0xffffff8005e46001
0xffffff81ccbebc00 : 0xffffff7f86bcd375
0xffffff81ccbebc20 : 0xffffff8005e638ef
0xffffff81ccbebd70 : 0xffffff8005a981a1
0xffffff81ccbebe80 : 0xffffff8005a20abd
0xffffff81ccbebeb0 : 0xffffff8005a10448
0xffffff81ccbebf00 : 0xffffff8005a195fb
0xffffff81ccbebf70 : 0xffffff8005aa5ad6
0xffffff81ccbebfb0 : 0xffffff8005aced13
      Kernel Extensions in backtrace:
         com.apple.iokit.IOAudioFamily(1.8.9f9)[FCB6B5D9-28D3-37BB-917C-F77C3B2CF2F8]@0x ffffff7f86bc2000->0xffffff7f86bf0fff
            dependency: com.apple.kext.OSvKernDSPLib(1.6)[E29D4200-5C5A-3A05-8A28-D3E26A985478]@0xfffff f7f86bbb000
BSD process name corresponding to current thread: coreaudiod
Mac OS version:
12B19
Kernel version:
Darwin Kernel Version 12.1.0: Tue Aug 14 13:29:55 PDT 2012; root:xnu-2050.9.2~1/RELEASE_X86_64
Kernel UUID: 3005059E-270B-3B9F-940D-7A66C05DDC9D
Kernel slide:     0x0000000005800000
Kernel text base: 0xffffff8005a00000
System model name: iMac12,2 (Mac-942B59F58194171B)
System uptime in nanoseconds: 307621556995213
last loaded kext at 104073447808115: com.apple.driver.DiskImages.SparseDiskImage          344 (addr 0xffffff7f88086000, size 16384)
last unloaded kext at 104137380589375: com.apple.driver.DiskImages.KernelBacked          344 (addr 0xffffff7f87dae000, size 73728)
loaded kexts:
com.intego.iokit.VirusBarrierX6Service          10.6.18
com.intego.iokit.VBX6NKE          1
com.intego.iokit.BehavioralKext          1
com.intego.kext.VirusBarrier.AppBarrierKPI          10.6.18
com.intego.kext.VirusBarrierKPI          10.6.18
com.apple.filesystems.udf          2.3
com.apple.driver.AppleIntelProfile          97
com.apple.driver.AppleBluetoothMultitouch          75.15
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.driver.AudioAUUC          1.60
com.apple.driver.AGPM          100.12.69
com.apple.filesystems.autofs          3.0
com.apple.iokit.IOBluetoothSerialManager          4.0.9f8
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.driver.AppleHDA          2.3.0f2
com.apple.driver.AppleUpstreamUserClient          3.5.10
com.apple.kext.AMDFramebuffer          8.0.0
com.apple.AMDRadeonAccelerator          1.0.0
com.apple.driver.AppleBacklight          170.2.3
com.apple.driver.AppleMikeyDriver          2.3.0f2
com.apple.driver.AppleIntelHD3000Graphics          8.0.0
com.apple.driver.AppleSMCLMU          2.0.2d0
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.0.9f8
com.apple.driver.AppleSMCPDRC          1.0.0
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.ApplePolicyControl          3.2.6
com.apple.driver.AppleIntelSNBGraphicsFB          8.0.0
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.AppleMCCSControl          1.0.33
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.iokit.SCSITaskUserClient          3.5.1
com.apple.driver.AppleUSBCardReader          3.1.0
com.apple.driver.AppleIRController          320.15
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.2.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          34
com.apple.driver.AppleUSBHub          5.1.6
com.apple.iokit.AppleBCM5701Ethernet          3.2.5b3
com.apple.driver.AirPort.Atheros40          600.70.23
com.apple.driver.AppleFWOHCI          4.9.5
com.apple.driver.AppleAHCIPort          2.4.0
com.apple.driver.AppleUSBEHCI          5.1.5
com.apple.driver.AppleEFINVRAM          1.6.1
com.apple.driver.AppleACPIButtons          1.6
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.7
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.6
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.driver.AppleProfileTimestampAction          97
com.apple.driver.AppleProfileThreadInfoAction          97
com.apple.driver.AppleProfileRegisterStateAction          97
com.apple.driver.AppleProfileReadCounterAction          97
com.apple.driver.AppleProfileKEventAction          97
com.apple.driver.AppleProfileCallstackAction          97
com.apple.iokit.AppleProfileFamily          97
com.apple.driver.IOBluetoothHIDDriver          4.0.9f8
com.apple.driver.AppleMultitouchDriver          235.27
com.apple.kext.triggers          1.0
com.apple.iokit.IOSerialFamily          10.0.6
com.apple.driver.DspFuncLib          2.3.0f2
com.apple.iokit.IOAudioFamily          1.8.9fc9
com.apple.kext.OSvKernDSPLib          1.6
com.apple.iokit.IOAcceleratorFamily          19.0.26
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.kext.AMD6000Controller          8.0.0
com.apple.kext.AMDSupport          8.0.0
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.0.9f8
com.apple.driver.AppleHDAController          2.3.0f2
com.apple.iokit.IOHDAFamily          2.3.0f2
com.apple.iokit.IOSurface          86.0.2
com.apple.iokit.IOBluetoothFamily          4.0.9f8
com.apple.driver.AppleGraphicsControl          3.2.6
com.apple.iokit.IONDRVSupport          2.3.4
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.iokit.IOGraphicsFamily          2.3.4
com.apple.driver.AppleSMC          3.1.3d11
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.IOPlatformPluginFamily          5.2.0d16
com.apple.driver.AppleThunderboltEDMSink          1.1.8
com.apple.driver.AppleThunderboltEDMSource          1.1.8
com.apple.driver.AppleUSBHIDKeyboard          165.5
com.apple.driver.AppleHIDKeyboard          165.5
com.apple.driver.AppleThunderboltDPOutAdapter          1.8.5
com.apple.driver.AppleThunderboltDPInAdapter          1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily          1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.1
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.1
com.apple.iokit.IOUSBMassStorageClass          3.5.0
com.apple.iokit.IOAHCISerialATAPI          2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.1
com.apple.iokit.IOUSBHIDDriver          5.0.0
com.apple.driver.AppleUSBMergeNub          5.1.5
com.apple.driver.AppleUSBComposite          5.0.0
com.apple.iokit.IOUSBUserClient          5.0.0
com.apple.driver.AppleThunderboltNHI          1.6.0
com.apple.iokit.IOThunderboltFamily          2.0.3
com.apple.iokit.IOEthernetAVBController          1.0.2b1
com.apple.iokit.IO80211Family          500.15
com.apple.iokit.IONetworkingFamily          3.0
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IOAHCIFamily          2.2.0
com.apple.iokit.IOUSBFamily          5.1.6
com.apple.iokit.IOHIDFamily          1.8.0
com.apple.driver.AppleEFIRuntime          1.6.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          344
com.apple.iokit.IOStorageFamily          1.8
com.apple.driver.AppleKeyStore          28.18
com.apple.driver.AppleACPIPlatform          1.6
com.apple.iokit.IOPCIFamily          2.7
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
System Profile:
Model: iMac12,2, BootROM IM121.0047.B1F, 4 processors, Intel Core i7, 3.4 GHz, 16 GB, SMC 1.72f2
Graphics: AMD Radeon HD 6970M, AMD Radeon HD 6970M, PCIe, 2048 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A54463531323634485A2D3147344831
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A54463531323634485A2D3147344831
Memory Module: BANK 0/DIMM1, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A54463531323634485A2D3147344831
Memory Module: BANK 1/DIMM1, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A54463531323634485A2D3147344831
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x9A), Atheros 9380: 4.0.70.23-P2P
Bluetooth: Version 4.0.9f8 10405, 2 service, 18 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: Hitachi HDS722020ALA330, 2 TB
Serial ATA Device: HL-DT-STDVDRW GA32N
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 3
USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfa120000 / 5
USB Device: Apple Keyboard, apple_vendor_id, 0x0220, 0xfa122000 / 7
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 6
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x850b, 0xfa200000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: Back-UPS BX1500G FW:866.L5 .D USB FW:L5, 0x051d (American Power Conversion), 0x0002, 0xfd140000 / 5
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfd110000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3
Is this problem happening to anybody else? Has anybody else encountered similar problems? I didn't install any new software or upgrades around the time this started happening.

Any solutions to this problem? I too have this kernel panic, however it only happens about once a week. Always upon wake from sleep as you've indicated.
FYI I don't have intego software, or an APC installed. Nor am I using filevault.
This is on an up to date, MacBook Pro Retina.
Robert

Mail unresponsive after wake from sleep.

When my Retina Macbook Pro wakes from sleep, when i go to mail, it will often become unresponsive for a period of a few minutes - if i go and use safari/ other apps, it will normally resume normal use in its own time, alternatively, i must force quit and reopen to gain use of mail again.
I cant think of any configuration changes which caused this problem to begin, not after any particular software update of anything, am running the most up-to-date version of Mountain Lion - is anyone else seeing this problem and have a solution?

my problem on mail, is that sometimes when i quit it (cmd + Q) it will not quit. although the mail window is gone, but the app is still running in background. and i have to force close it only i can re-open it. and if i didn't force close it, i can't turn off my mac. using MBPr as well in Mountain Lion. really hoping for a solution to this problem.

External monitor flashes on and off randomly after wake from sleep

I have a Mid-2009 13" MacBook Pro 2.26GHz hooked up to a Samsung SyncMaster 2033 External monitor via the MiniDisplayPort-DVI connector.
After waking from sleep, the external monitor will go blank for a fraction of a second at random intervals (display on the MBP remains normal). The flickering clusters are about minutes apart, while flickers within a cluster (usually 2-3 flickers per cluster) is of order seconds apart. "Detect displays" will not make this go away. The only way I can make it go back to normal is to unplug-and re-plug the MiniDisplayPort connector on the MBP.
Anyone else got a more elegant solution to this that does not involved wearing down the displayport?

I tried this. No change. However, I did start playing with the Display settings. Oddly enough, when I change the disfunctioning monitor to 720p it starts working again. Does this mean anything to anyone?

Why am i getting mouse lag after wake from sleep?

both cordless mmouse and corded wacom tablet are displaying lag after waking from sleep. restart usually, but not always, helps. usb devices are on a powered external hub. noticing this after upgrading from nvidia geforce 8800 to ati 5770. compatibility issue?
specs are:
Hardware Overview:
Model Name:          Mac Pro
Model Identifier:          MacPro3,1
Processor Name:          Quad-Core Intel Xeon
Processor Speed:          2.8 GHz
Number Of Processors:          2
Total Number Of Cores:          8
L2 Cache (per processor):          12 MB
Memory:          8 GB
Bus Speed:          1.6 GHz
Boot ROM Version:          MP31.006C.B05
SMC Version (system):          1.25f4
ATI Radeon HD 5770:
Name:          ATY,Hoolock
Type:          Display Controller
Driver Installed:          Yes
MSI:          Yes
Bus:          PCI
Slot:          Slot-1
Vendor ID:          0x1002
Device ID:          0x68b8
Subsystem Vendor ID:          0x106b
Subsystem ID:          0x00cf
Revision ID:          0x0000
Link Width:          x16
Link Speed:          5.0 GT/s
NVIDIA GeForce GT 120:
Name:          NVDA,Display-B
Type:          Display Controller
Driver Installed:          Yes
MSI:          Yes
Bus:          PCI
Slot:          Slot-2
Vendor ID:          0x10de
Device ID:          0x0640
Subsystem Vendor ID:          0x106b
Subsystem ID:          0x0010
ROM Revision:          3386
Revision ID:          0x00a1
Link Width:          x16
Link Speed:          5.0 GT/s

That's normal. It just lets you know the call has ended.

MBP 17" garbled screen after waking from sleep

Occasionally, when the computer wakes from sleep, the screen is garbled like on the picture at http://www.geocities.com/chv74/IMG_6416.JPG. It makes no difference wheather the computer was put into sleep by closing the lid or any other method. I can type in my password and continue, but the screen is still garbled, the desktop is shown, but also garbled. The only method to correct the situation is to close the lid, let is sleep again and then wake the computer again. Ot, restart the whole thing by turning it off (5 seconds power-button). Sometimes it will not occur for a few weeks. It occurred throughout the updates 10.4.6 up to and including 10.4.10.
I just want to know if others have experienced the same or not.

So, I took my MBP to my Apple store where I bought it and showed the picture. They said it is not supposed to happen and I should reset the NVRAM, but that didn't help. So, now they replaced the motherboard and the problem is fixed, but my bluetooth doesn't work anymore, so my laptop is still in the shop. So, I can't say that it is completely over.
Another thing. I took it back first to have my screen fixed. It looked like there was dust behind the screen! I've seen someone post something about that also. At first it was just at one place, but in one week it turned up throughout the entire screen. So, I had the screen replaced. Now, there is one dead pixel right in the middle. Very irritating. What's up with these screens? Can they not give you a pixel-perfect screen in such an expensive notebook?! My last screen had three dead pixels (not at annoying places though)!
So, perhaps, y'all should take a picture too and show it to a tech guy at your Apple store.
Later, Parsec

Yosemite frozen for a few seconds after wake from sleep

So I open up the lid of my late 2012 Macbook Pro Retina and I instantly see whatever it was I was seeing before closing it, but I can't do anything for anywhere between 3 and 10 seconds... The problem exists whether my Macbook goes to hibernation or not (my sleep delay is set to a loooooong interval). I've already tried PRAM and SMC reset, tried a fresh install of Yosemite from recovery, etc. Nothing seems to change this behaviour. Maybe this problem is just too high profile and I'm whining about non-issues here, but this hasn't ever happened before, on any other Mac OS version I've ever had. And quite frankly, that sweet instant wake-from-sleep is something I was always proud of as a mac user. ;-) Now my mac is starting to behave like every Windoze version... ever! What gives?!
(PS: I have a Transcend JetDrive 720 480GB upgrade built in but the problem existed before the upgrade. And I'm running Yosemite 10.10.3 but that upgrade also had no impact on the issue.)

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(1307 ' 0.5 0.25 50 1000 15 5120 1000 25000 6 6 5 1 0 100 ' 51 25600 4 10 25 5120 102400 1000 25 1536 500 40 500 300 85 25 20480 262144 20 2000 524288 604800 5 1024 25 );k=({Soft,Hard}ware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts Displays PCI UniversalAccess InstallHistory ConfigurationProfile AirPort 'com\.apple\.' -\\t N\\/A 'AES|atr|udit|msa|dnse|ax|ensh|fami|FileS|fing|ft[pw]|gedC|kdu|etS|is\.|alk|ODSA|otp|htt|pace|pcas|ps-lp|rexe|rlo|rsh|smb|snm|teln|upd-[aw]|uuc|vix|webf' OSBundle{Require,AllowUserLoa}d 'Mb/s:Mb/s:ms/s:KiB/s:%:total:MB:total:lifetime:sampled:per sec' 'Net in:Net out:I/O wait time:I/O requests:CPU usage:Open files:Memory:Mach ports:Energy:Energy:File opens:Forks:Failed forks:System errors' 'tsA|[ST]M[HL]' PlistBuddy{,' 2>&1'}' -c Print' 'Info\.plist' CFBundleIdentifier );f=('\n%s'{': ','\n\n'}'%s\n' '\nRAM details\n%s\n' %s{' ','\n'{"${k[22]}",}}'%s\n' '%.1f GiB: %s\n' '\n    ...and %d more line(s)\n' '\nContents of %s\n    '"${k[22]}"'mod date: %s\n    '"${k[22]}"'size (B): %d\n    '"${k[22]}"'checksum: %d\n%s\n' );c=(879294308 4071182229 461455494 216630318 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 2636415542 3694147963 1233118628 2456546649 2806998573 2778718105 842973933 1383871077 1591517921 676087606 1445213025 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 3374894509 1051159591 892310726 1707497389 523110921 2883943871 3873345487 );s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[4]} ' s/:$//;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[9]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of|yc/!{ s/^.+is |\.//g;p;q;} ' ' BEGIN { FS="\f";if(system("A1 42 83 114")) d="^'"${k[21]}"'launch(d\.peruser\.[0-9]+|ctl\.(Aqua|Background|System))$";} { if($2~/[1-9]/) { $2="status: "$2;printf("'"${f[4]}"'",$1,$2);} else if(!d||$1!~d) print $1;} ' ' $1>1{$NF=$NF" x"$1} /\*/{if(!f)f="\n\t* Code injection"} {$1=""} 1;END{print f} ' ' NR==2&&$4<='${p[7]}'{print $4} ' ' BEGIN{FS=":"} ($1~"wir"&&$2>'${p[22]}') {printf("wired %.1f\n",$2/2^18)} ($1~/P.+ts/&&$2>'${p[19]}') {printf("paged %.1f\n",$2/2^18)} ' '/YLD/s/=/ /p' ' { q=$1;$1="";u=$NF;$NF="";gsub(/ +$/,"");print q"\f"$0"\f"u;} ' ' /^ {6}[^ ]/d;s/:$//;/([^ey]|[^n]e):/d;/e: Y/d;s/: Y.+//g;H;${ g;s/ \n (\n)/\1/g;s/\n +(M[^ ]+)[ -~]+/ (\1)/;s/\n$//;/( {8}[^ ].*){2,}/p;} ' 's:^:/:p;' ' !/, .+:/ { print;n++;} END{if(n<'{${p[12]},${p[13]}}')printf("^'"${k[21]}"'.+")} ' '|uniq' ' 1;END { print "/L.+/Scr.+/Templ.+\.app$";print "/L.+/Pri.+\.plugin$";if(NR<'{${p[14]},${p[21]}}') print "^/[Sp].+|'${k[21]}'";} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p;' '&&echo On' '/\.(bundle|component|framework|kext|mdimporter|plugin|qlgenerator|saver|wdgt|xpc)$/p' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".","");print $0"$";} END { split("'"${c[*]}"'",c);for(i in c) print "\t"c[i]"$";} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/((iTu|ok).+dle|\.(component|mailbundle|mdimporter|plugin|qlgenerator|saver|wdgt|xpc))$/p;' ' BEGIN{ FS="= "} $2 { gsub(/[()"]/,"",$2);print $2;} !/:/&&!$2{print "'${k[23]}'"} ' ' /^\//!d;s/^.{5}//;s/ [^/]+\//: \//p;' '>&-||echo No' '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[2]}'{$2=$2-1;print}' ' BEGIN { M1='${p[16]}';M2='${p[18]}';M3='${p[8]}';M4='${p[3]}';} !/^A/{next};/%/ { getline;if($5<M1) o["CPU"]="CPU: user "$2"%, system "$4"%";next;} $2~/^disk/&&$4>M2 { o[$2]=$2": "$3" ops/s, "$4" blocks/s";next;} $2~/^(en[0-9]|bridg)/ { if(o[$2]) { e=$3+$4+$5+$6;if(e) o[$2]=o[$2]"; errors "e"/s";next;};if($4>M3||$6>M4) o[$2]=$2": in "int($4/1024)", out "int($6/1024)" (KiB/s)";} END { for(i in o) print o[i];} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' BEGIN{FS=": "} /^ {10}O/ {exit} /^ {0,12}[^ ]/ {next} $1~"Ne"&&$2!~/^In/{print} $1~"Si" { if(a[2]) next;split($2,a," ");if(a[1]-a[4]<'${p[5]}') print;};$1~"T"&&$2<'${p[20]}'{print};$1~"Se"&&$2!~"2"{print};' ' BEGIN { FS="\f";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1;} ' ' BEGIN { split("'"${p[1]}"'",m);FS="\f";} $2<=m[$1]{next} $1==9||$1==10 { "ps -c -ouid -p"$4"|sed 1d"|getline $4;} $1<11 { o[$1]=o[$1]"\n    "$3" (UID "int($4)"): "$2;} $1==11&&$5!~"^/dev" { o[$1]=o[$1]"\n    "$3" (UID "$4") => "$5" (status "$6"): "$2;} $1==12&&$5 { "ps -c -ocomm -p"$5"|sed 1d"|getline n;if(n) $5=n;o[$1]=o[$1]"\n    "$5" => "$3" (UID "$4"): "$2;} $1~/1[34]/ { o[$1]=o[$1]"\n    "$3" (UID "$4", error "$5"): "$2;} END { n=split("'"${k[27]}"'",u,":");for(i=n+1;i<n+4;i++)u[i]=u[n];split("'"${k[28]}"'",l,":");for(i=1;i<15;i++) if(o[i])print "\n"l[i]" ("u[i]")\n"o[i];} ' ' /^ {8}[^ ]/{print} ' ' BEGIN { L='${p[17]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n    "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n    [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"stat -f%z "F|getline S;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${k[30]}"' "F|getline g) { l++;if(l<=L) f=f"\n    "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n    '"${k[22]}"'"T;printf("'"${f[8]}"'",F,D,S,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' 's/^.{52}(.+) <.+/\1/p' ' /id: N|te: Y/{i++} END{print i} ' ' /kext:/ { split($0,a,":");p=a[1];k[S]='${k[25]}';k[U]='${k[26]}';v[S]="Safe";v[U]="true";for(i in k) { s=system("'"${k[30]}"'\\ :"k[i]" \""p"\"/*/I*|grep -qw "v[i]);if(!s) a[1]=a[1]" "i;};if(!a[2]) a[2]="'"${k[23]}"'";printf("'"${f[4]}"'",a[1],a[2]);next;} !/^ *$/ { p="'"${k[31]}"'\\ :'"${k[33]}"' \""$0"\"/*/'${k[32]}'";p|getline b;close(p);if(b~/ .+:/||!b) b="'"${k[23]}"'";printf("'"${f[4]}"'",$0,b);} ' '/ en/!s/\.//p' ' NR>=13 { gsub(/[^0-9]/,"",$1);print;} ' ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?'${k[32]}'$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ / [VY]/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' '/^find: /!p;' ' /^p/{ s/.//g;x;s/\nu/'$'\f''/;s/(\n)c/\1'$'\f''/;s/\n\n//;p;};H;' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */    /;p;' ' s/^.+ |\(.+$$//g;p;' '1;END{if(NR<'${p[15]}')printf("^/(S|usr/(X|li))")}' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END{ if(i>1)print n} ' s/{'\.|jnl: ','P.+:'}'//;s/ +([0-9]+)(.+)/\2'$'\t\t''\1/p' ' /es: ./{ /iOS/d;s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/://;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(B2|[my]): /H;d;:0'$'\n'' x;/[my]: [AM]|m: I.+p$|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' 's/$/'$'\f''(0|-(4[34])?)$/p' '|sort'{'|uniq'{,\ -c},\ -nr} ' s/^/'{5,6,7,8,9,10}$'\f''/;s/ *'$'\f'' */'$'\f''/g;p;' 's/:.+$//p' '|wc -l' /{\\.{kext,xpc,'(appex|pluginkit)'}'\/(Contents\/)?'Info,'Launch[AD].+'}'\.plist$/p' 's/([-+.?])/\\\1/g;p' 's/, /\'$'\n/g;p' ' BEGIN{FS="\f"} { printf("'"${f[6]}"'",$1/2^30,$2);} ' ' /= D/&&$1!~/'{${k[24]},${k[29]}}'/ { getline d;if(d~"t") print $1;} ' ' BEGIN{FS="\t"} NR>1&&$NF!~/0x|\.([0-9]{3,}|[-0-9A-F]{36})$/ { print $NF"\f"a[split($(NF-1),a," ")];} ' '|tail -n'{${p[6]},${p[10]}} ' s/.+bus /Bus: /;s/,.+[(]/ /;s/,.+//p;' ' { $NF=$NF" Errors: "$1;$1="";} 1 ' ' 1s/^/\'$'\n''/;/^ +(([MNPRSV]|De|Li|Tu).+|Bus): .|d: Y/d;s/:$//;$d;p;' ' BEGIN { RS=",";FS=":";} $1~"name" { gsub(/["\\]/,"",$2);print $2;} ' '|grep -q e:/' '/[^ .]/p' '{ print $1}' ' /^ +N.+: [1-9]/ { i++;} END { if(i) print "system: "i;} ' ' NF { print "'{admin,user}' "$NF;exit;} ' ' /se.+ =/,/[\}]/!d;/[=\}]/!p ' ' 3,4d;/^ +D|Of|Fu| [0B]/d;s/^ |:$//g;$!H;${ x;/:/p;} ' ' BEGIN { FS=": ";} NR==1 { sub(":","");h="\n"$1"\n";} /:$/ { l=$1;next;} $1~"S"&&$2!~3 { getline;next;} /^ {6}I/ { i++;L[i]=l" "$2;} END { if(i) print h;for(j=0;j<'${p[24]}';j++) print L[i-j];} ' ' /./H;${ x;s/\n//;s/\n/, /g;/,/p;} ' ' {if(int($6)>'${p[25]}')printf("swap used %.1f\n",$6/1024)} ' ' BEGIN{FS="\""} $3~/ t/&&$2!~/'{${k[24]},${k[29]}}'/{print $2} ' ' int($1)>13 ' p ' BEGIN{FS="DB="} { sub(/\.db.*/,".db",$2);print $2;} ' {,1d\;}'/r%/,/^$/p' ' NR==1{next} NR>11||!$0{exit} {print $NF"\f"substr($0,1,32)"\f"$(NF-7)} ' '/e:/{print $2}' ' /^[(]/{ s/....//;s/$/:/;N;/: [)]$/d;s/\n.+ ([^ ]+).$/\1/;H;};${ g;p;} ' '1;END { exit "find /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom -mtime -'${p[23]}'s"|getline;} ' ' NR<='${p[26]}' { o=o"\n"$0;next;} { o="";exit;} END{print o|"sed 1d"} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab kextfind top pkgutil "${k[30]}\\" echo cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin' env pluginkit scutil 'dtrace -q -x aggsortrev -n' security sed\ -En awk 'dscl . -read' networksetup mdutil lsof test osascript\ -e netstat mdls route cat uname powermetrics codesign );c2=(${k[21]}loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'" 'L*/Ca*/'${k[21]}'Saf*/E* -d 2 -name '${k[32]} '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' -i '-nl -print' '-F \$Sender -k Level Nle 3 -k Facility Req "'${k[21]}'('{'bird|.*i?clou','lsu|sha'}')"' "-f'%N: %l' Desktop {/,}L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message CRne '0xdc008012|(allow|call)ing|Goog|(mplet|nabl)ed|ry HD|safe b|succ|xpm' -k Message CReq 'bad |Can.t l|corru|dead|fail|GPU |hfs: Ru|inval|Limiti|v_c|NVDA[(]|pagin|Purg(ed|in)|error|Refus|s ful|TCON|tim(ed? ?|ing )o|trig|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o%cpu,comm,ruid' "' syscall::recvfrom:return {@a[execname,uid]=sum(arg0)} syscall::sendto:return {@b[execname,uid]=sum(arg0)} syscall::open*:entry {@c[execname,uid,copyinstr(arg0),errno]=count()} syscall::execve:return, syscall::posix_spawn:return {@d[execname,uid,ppid]=count()} syscall::fork:return, syscall::vfork:return, syscall::posix_spawn:return /arg0<0/ {@e[execname,uid,arg0]=count()} syscall:::return /errno!=0/ {@f[execname,uid,errno]=count()} io:::wait-start {self->t=timestamp} io:::wait-done /self->t/ { this->T=timestamp - self->t;@g[execname,uid]=sum(this->T);self->t=0;} io:::start {@h[execname,uid]=sum(args[0]->b_bcount)} tick-10sec { normalize(@a,2560000);normalize(@b,2560000);normalize(@c,10);normalize(@d,10);normalize(@e,10);normalize(@f,10);normalize(@g,10000000);normalize(@h,10240);printa(\"1\f%@d\f%s\f%d\n\",@a);printa(\"2\f%@d\f%s\f%d\n\",@b);printa(\"11\f%@d\f%s\f%d\f%s\f%d\n\",@c);printa(\"12\f%@d\f%s\f%d\f%d\n\",@d);printa(\"13\f%@d\f%s\f%d\f%d\n\",@e);printa(\"14\f%@d\f%s\f%d\f%d\n\",@f);printa(\"3\f%@d\f%s\f%d\n\",@g);printa(\"4\f%@d\f%s\f%d\n\",@h);exit(0);} '" '-f -pfc /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag $ -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f'$'\f''%Sc'$'\f''%N -t%F {} \;' '/S*/*/Ca*/*xpc*' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' /\ kMDItemContentTypeTree=${k[21]}{bundle,mach-o-dylib} :Label "/p*/e*/{auto*,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {/p*,/usr/local}/e*/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*{,/*} .launchd.conf" list '-F "" -k Sender hidd -k Level Nle 3' /Library/Preferences/${k[21]}alf\ globalstate --proxy '-n get default' vm.swapusage --dns -get{dnsservers,info} dump-trust-settings\ {-s,-d,} '~ "kMDItemKind=Package"' '-R -ce -l1 -n5 -o'{'prt -stats prt','mem -stats mem'}',command,uid' -kl -l -s\ / '--regexp --files '${k[21]}'pkg.*' '+c0 -i4TCP:0-1023' ${k[21]}dashboard\ layer-gadgets '-d /L*/Mana*/$USER' '-app Safari WebKitDNSPrefetchingEnabled' '-Fcu +c0 -l' -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' '-F \$Message -k Sender kernel -k Message CReq "'{'n Cause: -','(a und|I/O |jnl_io.+)err|disk.+abo','USBF:.+bus'}'"' -name\ kMDItem${k[33]} -T\ hfs '-n get default' -listnetworkserviceorder :${k[33]} :CFBundleDisplayName $EUID {'$TMPDIR../C ','/{S*/,}'}'L*/{,Co*/*/*/L*/}{Cache,Log}s -type f -size +'${p[11]}'M -exec stat -f%z'$'\f''%N {} \;' \ /v*/d*/*/*l*d{,.*.$UID}/* '-app Safari UserStyleSheetEnabled' 'L*/A*/Fi*/P*/*/a*.json' users/$USER\ HomeDirectory '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' ' -F "\$Time \$(Sender): \$Message" -k Sender Rne "launchd|nsurls" -k Level Nle 3 -k Facility R'{'ne "user|','eq "'}'console" -k Message CRne "[{}<>]|asser|commit - no t|deprec|done |ect pas|fmfd|Goog|ksho|ndum|obso|realp|rned f|/root|sandbox ex" ' getenv '/ "kMDItemDateAdded>=\$time.now(-'${p[23]}')&&kMDItem'${k[33]}'=*"' -m\ / '' ' -F "\$Time \$(RefProc): \$Message" -k Sender Req launchd -k Level Nle 3 -k Message Rne "asse|bug|File ex|hij|Ig|Jet|key is|lid t|Plea|ship" ' print{,-disabled}\ {system,{gui,user}/$UID} '-n1 --show-initial-usage --show-process-energy' -r ' -F "\$Message" -k Sender nsurlstoraged -k Time ge -1h -k Level Nle 4 -k Message Req "^(ER|IN)" ' '/A* -type d -name *.app -prune ! -user 0' -vv );N1=${#c2[@]};for j in {0..20};do c2[N1+j]=SP${k[j]}DataType;done;l=({Restricted\ ,Lock,Pro}files POST Battery {Safari,App,{Bad,Loaded}\ kernel,Firefox}\ extensions System\ load boot\ args FileVault\ {2,1} {Kernel,System,Console,launchd}\ log SMC Login\ hook 'I/O per process' 'High file counts' UID {System,Login,Agent,User}' services '{load,disabl}ed {Admin,Root}\ access Font\ issues Firewall Proxies DNS TCP/IP Wi-Fi 'Elapsed time (sec)' {Root,User}\ crontab {Global,User}' login items' Spotlight Memory\ pressure Listeners Widgets Parental\ Controls Prefetching Nets Volumes {Continuity,I/O,iCloud,HID,HCI}\ errors {User,System}\ caches/logs XPC\ cache Startup\ items Shutdown\ codes Heat Diagnostic\ reports Bad\ {plist,cache}s 'VM (GiB)' Bundles{,' (new)'} Trust\ settings Activity Free\ space Stylesheet Library\ paths{,' ('{shell,launchd}\)} Data\ packages Modifications );N3=${#l[@]};for i in {0..8};do l[N3+i]=${k[5+i]};done;F() { local x="${s[$1]}";[[ "$x" =~ ^([\&\|\<\>]|$) ]]&&{ printf "$x";return;};:|${c1[30]} "$x" 2>&-;printf "%s \'%s\'" "|${c1[30+$?]}" "$x";};A0() { Q=6;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo -v;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;date '+Start time: %T %D%n';printf '\n[Process started]\n\n'>&4;printf 'Revision: %s\n\n' ${p[0]};};A1() { local c="${c1[$1]} ${c2[$2]}";shift 2;c="$c ` while [[ "$1" ]];do F $1;shift;done`";((P2))&&{ c="sudo $c";P2=;};v=`eval "$c"`;[[ "$v" ]];};A2() { local c="${c1[$1]}";[[ "$c" =~ ^(awk|sed ) ]]&&c="$c '${s[$2]}'"||c="$c ${c2[$2]}";shift 2;local d=` while [[ "$1" ]];do F $1;shift;done`;((P2))&&{ c="sudo $c";P2=;};local a;v=` while read a;do eval "$c '$a' $d";done<<<"$v";`;[[ "$v" ]];};A3(){ v=$((`date +%s`-v[3]));};export -f A1 A2 F;B1() { v=No;! ((v[1]))&&{ v=;P1=1;};};eval "`type -a B1|sed '1d;s/1/2/'`";B3(){ v[$1]="$v";};B4() { local i=$1;local j=$2;shift 2;local c="cat` while [[ "$1" ]];do F $1;shift;done`";v[j]=`eval "{ $c;}"<<<"${v[i]}"`;};B5(){ v="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d$'\e' <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F$'\e' ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`egrep -v "${v[$1]}"<<<"$v"|sort`;};eval "`type -a B7|sed '1d;s/7/8/;s/-v //'`";C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { B4 0 0 63&&C1 1 $1;};C4() { echo $'\t'"Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};C5() { sudo -k;pbcopy<<<"$o";printf '\n\tThe test results are on the Clipboard.\n\n\tPlease close this window.\n';exit 2>&-;};for i in 1 2;do eval D$((i-1))'() { A'$i' $@;C0;};';for j in 2 3;do eval D$((i+2*j-3))'() { local x=$1;shift;A'$i' $@;C'$j' $x;};';done;done;trap C5 2;o=$({ A0;D0 0 N1+1 2;D0 0 $N1 1;B1;C2 31;B1&&! B2&&C2 32;D2 22 15 63;D0 0 N1+2 3;D0 0 N1+15 17;D4 3 0 N1+3 4;D4 4 0 N1+4 5;D4 N3+4 0 N1+9 59;D0 0 N1+16 99;for i in 0 1 2;do D4 N3+i 0 N1+5+i 6;done;D4 N3+3 0 N1+8 71;D4 62 1 10 7;D4 10 1 11 8;B2&&D4 18 19 53 67;D2 11 2 12 9;D2 12 3 13 10;D2 13 32 70 101 25;D2 71 6 76 13;D2 45 20 52 66;A1 7 77 14;B3 28;A1 20 31 111;B6 0 28 5;B4 0 0 110;C2 66;D4 70 8 15 38;D0 9 16 16 77 45;C4;B2&&D0 35 49 61 75 76 78 45;B2&&{ D0 28 17 45;C4;};B2&&{ A1 43 85 117;B3 29;B4 0 0 119 76 81 45;C0;B4 29 0 118 119 76 82 45;C0;    };D0 12 40 54 16 79 45;D0 12 39 54 16 80 45;D4 74 25 77 15&&{ B4 0 8 103;B4 8 0;A2 18 74;B6 8 0 3;C3 75;};B2&&D4 19 21 0;B2&&D4 40 10 42;D2 2 0 N1+19 46 84;D2 44 34 43 53;D2 59 22 20 32;D2 33 0 N1+14 51;for i in {0..2};do A1 29 35+i 104+i;B3 25+i;done;B6 25 27 5;B6 0 26 5;B4 0 0 110;C2 69;D2 34 21 28 35;D4 35 27 29 36;A1 40 59 120;B3 18;A1 33 60 121;B8 18;B4 0 19 83;A1 27 32 39&&{ B3 20;B4 19 0;A2 33 33 40;B3 21;B6 20 21 3;};C2 36;D4 50 38 5 68;B4 19 0;D5 37 33 34 42;B2&&D4 46 35 45 55;D4 38 0 N1+20 43;B2&&D4 58 4 65 76 91;D4 63 4 19 44 75 95 12;B1&&{ D4 53 5 55 75 69&&D4 51 6 58 31;D4 56 5 56 97 75 98&&D0 0 N1+7 99;D2 55 5 27 84;D4 61 5 54 75 70;D4 14 5 14 96;D4 15 5 72 96;D4 17 5 78 96;C4;};D4 16 5 73 96;A1 13 44 74 18;C4;B3 4;B4 4 0 85;A2 14 61 89;B4 0 5 19 102;A1 17 41 50;B7 5;C3 8;B4 4 0 88;A2 14 24 89;C4;B4 0 6 19 102;B4 4 0 86;A2 14 61 89;B4 0 7 19 102;B5 6 7;B4 0 11 73 102;A1 42 86 114;j=$?;for i in 0 1 2;do ((i==2&&j==1))&&break;((! j))||((i))||B2&&A1 18 $((79+i-(i+53)*j)) 107+8*j 94 74||continue;B7 11;B4 0 0 11;C3 $((23+i*(1+i+2*j)));D4 $((24+i*(1+i+2*j))) 18-4*j 82+i-16*j $((112+((3-i)*i-40*j)/2));done;D4 60 4 21 24;D4 42 14 1 62;D4 43 37 2 90 48;D4 41 10 42;D2 48 36 47 25;A1 4 3 60&&{ B3 9;A2 14 61;B4 0 10 21;B4 9 0;A2 14 62;B4 0 0 21;B6 0 10 4;C3 5;};D4 9 41 69 100;D2 72 21 68 35;D2 49 21 48 49;B4 4 22 57 102;A1 21 46 56 74;B7 22;B4 0 0 58;C3 47;D4 54 5 7 75 76 69;D4 52 5 8 75 76 69;D4 57 4 64 76 91;D2 0 4 4 84;D2 1 4 51 84;D4 21 22 9 37;D0 0 N1+17 108;D4 76 24 38;A1 23 18 28 89;B4 0 16 22 102;A1 16 25 33;B7 16;B4 0 0 34;D1 31 47;D4 64 4 71 41;D4 65 5 87 116 74;C4;B4 4 12 26 89 23 102;for i in {0..3};do A1 0 N1+10+i 72 74;B7 12;B4 0 0 52;C3 N3+5+i;((i))||C4;done;A1 24 22 29;B7 12;B3 14;A2 39 57 30;B6 14 0 4;C3 67;A1 24 75 74;B4 1 1 122||B7 12;B4 0 0 123;B3 23;A2 39 57 30;B6 23 0 4;C3 68;B4 4 13 27 89 65;A1 24 23;B7 13;C3 73;B4 4 0 87;A2 14 61 89 20;B4 0 17;A1 26 50 64;B7 17;C3 6;A1 4 88;D5 77 44 89;D4 7 11 6;D0 0 N1+18 109;A3;C2 39;C4;} 4>&2 2>/dev/null;);C5
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
        Part 1 of 8 done at … sec
        Part 8 of 8 done at … sec
        The test results are on the Clipboard.
        Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Mbp retina processor choking (?) after wake from sleep

Similar Messages

Maybe you are looking for