MBP retina with line on all the screen! @#!!?!***!

Hi guys
I have a MBP retina 15" with yosemite 10.2.2, yesterday, I saw the screen full of lines, it could be a problem of the vga-video?
I also have the same problem in this moment..this are the screenshot of yesterday and now..
I finished the two year warranty 1 months ago..what can i do?
How can be expansive?
Thanks a lot!

Hello Mr.lollo14,
I would not be able to tell you how much it will cost to get your MacBook Pro and that will be something you will need to discuss at an Apple Store or an Apple Authorized service Provider. Take a look at the article below for more information about setting your Mac up for service.
Service Answer Center - Mac notebooks
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=Macn otebooks
Regards,
-Norm G.

Similar Messages

My screen is changing colors and has lines in all the screen what can i do

I accidentally dropped my cellphone s couple of times. Then it got wet but I did not know it was wet and I connected it to my charger then my screen started to change colors and had lines covering the whole screen what can I do? I need help!

There is nothing you can do with that unit
Apple should exchange it for an Out of Warranty exchange identical 5S for $269 if you are in the US ,similar pricing elsewhere

What up with all the screen freezes since the updates?

What up with all the screen freezes since the updates?

Sorry to say your installation must have been unsuccessful.
A normal installation would not do this.
Uninstall, run the cleanscript* and try again (maybe your AV is too agressive).
*http://www.adobe.com/support/contact/cs4clean.html

My mac screen comes out with white fuzzy lines going across the screen, it used to just go back to normal and out of no where it freezes and the white fuzzy lines go across the screen. Now it is frozen at the opening screen. what do i do?

My mac screen is frozen with white fuzzy lines going across the screen. I shut it off and turn it back on but it still remains white fish lines on the start up screen. I've tried revolting it, it works sometimes but now its stuck at the starting screen. I have been at this for 2 hours to try and fix it but nothing has changed about the screen. What do I do, if I break this computer I'm screwed.

I would post a picture of the screen but I do not know how to do that

MAC OSX 10.3.6 having Boot Problems(Gray Screen with Spinning wheel all the Time) ,How to restore all the files without Mac Startpup Disc,still is not possible i want to download full CD from Apple Site, Is It Possible to Download!

Hi Frnds,Small Favour for me,...
MAC OSX 10.3.6 having Boot Problem(Gray Screen with Spinning wheel all the Time) ,How to restore all the files without Mac Startpup Disc,still is not possible i want to download full CD from Apple Site, Is It Possible to Download!, Windows 7 is working perfectly , can i restore any files in MAC OSX 10.3.6 through Windows 7, or i need the MAC OSX 10.3.6 Bootable Files i need to enter the MAC OSX....

Hi Frnds,Small Favour for me,...
MAC OSX 10.3.6 having Boot Problem(Gray Screen with Spinning wheel all the Time) ,How to restore all the files without Mac Startpup Disc,still is not possible i want to download full CD from Apple Site, Is It Possible to Download!, Windows 7 is working perfectly , can i restore any files in MAC OSX 10.3.6 through Windows 7, or i need the MAC OSX 10.3.6 Bootable Files i need to enter the MAC OSX....

I have recently purchased my mac book with retina.i have explore all the feature but couldn't able to understand how to use my facetime. plz assist me

i have recently purchased my mac book with retina.i have explore all the feature but couldn't able to understand how to use my facetime. plz assist me
rahul

Greetings rahul81,
After reviewing your post, it sounds like you want to know how to use FaceTime. I would recommend that you read this article, it may be able to help the issue.
FaceTime for Mac (Yosemite): Make and receive FaceTime calls
Thanks for using Apple Support Communities.
Take care,
Mario

Ipad had colored lines running through the screen

My ipad first generation which i love now has colored lines running through the screen. Can it be fixed?

Howdy diana,
It sounds like your iPad has mulitcolored lines all over it. I would recommend a few things here to help isolate the issue to software or hardware. Try restarting the phone with this article:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If the issue persists, I would next try reseting the device with the same article:
To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
If the issue is not resolved, I would next backup your device to iTunes, and restore it as a new device to see if the lines are still there. If not then restore your backup and verify they are still gone.
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
If the lines are there even when setup as a new device, your iPad may need service:
https://selfsolve.apple.com/agreementWarrantyDynamic.do
Thank you for using Apple Support Communities.
All the best,
Sterling

Straight line through all the page

Hi everybody!
How can I make a straight and thin line through all the page, under my logo?
I need the line to go from one to the other side of the page without interruption.
I created an image in Photoshop: I drew my logo and the line under it. I gave to the line the same width of the DW default window (1099 px).
Then I import the image as a .png with transparency, because it has to overlap every element in my web page.
I put it out of the main container and gave it a "relative" position, but then, both live view and browser preview are different: the line moves left or right, I can't control its position...
What is the easier and best way to create this graphic layout?
Thank you.

This is my screen.
Now the logo and the line are part of the same .png image. But I can't give it the right fixed position on the page.
I try to follow your instructions...
Sorry if I can't explain very well, but I'm new with this program (and sorry for my english too)!

Satellite M65-S9063 - Vertical white lines appearing down the screen!

Hi all - any ideas...
Model M65-S9063 Approximately 3 weeks ago a vertical white line appeared down the screen, it's around a mil thick.
Then yesterday a second one has appeared, slightly thinner this time. They're always there even after a reboot! It doesn't look as though any video is being displayed as they're always white. I was wondering graphics card perhaps? Or maybe the LCD itself?
Anyone seen this before??
Many thanks,

Hi!
You can simply determine the reason of this issue. Connect an external monitor the notebook and see what happens.
If you can notice the same error on the external screen, its a problem of the graphic card or display driver. If you dont have this issue on the external screen, you should go to an authorized service provider for exchanging the internal screen.
If you use a non Toshiba display driver you should remove it and test it with original Toshiba drivers.
I hope I could help you a little bit.
Bye

I purchased Macbook Pro i5 in March 2011. Now the screen has problem; one vertical blue line is in the screen (at the right side). I noticed this last week when I opened the MacBook, and now I am always seeing it. How to remove it?

I purchased Macbook Pro i5 in March 2011. Now the screen has problem; one vertical blue line is in the screen (at the right side). I noticed this last week when I opened the macbook and now I am always seening it. I am seeing the blue vertical line always in the screen. However, I am not seeing this line when I open Word, Excel, PowerPoint files (without pictures). But I am seeing this line always when I see movies, pictures, and all the files which have pictures. Please do let me know how can I remove this vertical blue line (blue tint) pernamentally from the screen.
Regards,
Ujjal

Backup your files to a external hard drive and disconnect.
Call Apple and make a warranty call, then take it to the nearest Apple Store etc.
You can run these things and it might clear your issue or give further informaiton
Perform a hardware check
http://support.apple.com/kb/ht1509
Then see if resetting the SMC/PRAM resolve your issue
http://support.apple.com/kb/HT3964
https://support.apple.com/kb/HT1379

Zoom and fit in all the screen resolution

Dear Friends,
Greetings! when i click on a full screen button, i want to zoom my flash screen for full screen for all the screen resolution. Imagine i loaded my swf in aspx page. in my swf i kept one full screen button, when i click on it it has to zoom my swf full screen, when i click again or press escape button it has to show my old website in the normal state. looking for help in this..
for example, you can refer this site: http://www.templatemonster.com/flash-templates/39229.html
(press fullscreen button and check)
Thanks in advance,
Syed

There is nothing you can do with that unit
Apple should exchange it for an Out of Warranty exchange identical 5S for $269 if you are in the US ,similar pricing elsewhere

Extra line running through the screen on my Officejet 6500 printer

I just noticed a second horizontal line running through the screen on my Officejet 6500 printer screen (right through where the ink levels show up.) The screen resembles graph paper. What causes this? Is there something wrong with the machine? Can something be done to correct it?

Hi there,
A full factory reset may not be required. Try downloading and running the print and scan doctor located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

With remote management enabled the screen saver never kicks in, the monitor never sleeps

The title says it all. With remote management enabled the screen saver never kicks in, the monitor never sleeps. This is with an iMac. So I have to leave remote management off, which means instead of using remote desktop I have to manage the machine with TeamViewer. Life is still good, but this seems like a bug, and there's a few things remote desktop does that TeamViewer can't.

You should use a specialized tool such as TextWrangler, the Property List Editor, or the defaults command in the Terminal to view and change plist files; those created with recent software are encoded so that a regular text editor will not properly parse them.
(33430)

Why are there lines going across the screen?

Why are there lines going across the screen?

It may (likely) be a video card issue. There is a "known issue" with certain iMacs made in a certain timeframe (2011-12 I think), and one of the telltale symptoms is vertical lines showing up on your display. Go to Apple's website (https://getsupport.apple.com/) to find out how to get support, then either call their service line (they usually pick right up) or take it into your nearest store's Genius Bar. They'll first check if your iMac's serial number is on the list of vulnerable machines, and then they'll have to do a diagnostic to prove that's the problem -- if your serial number's on the list and it fails the diagnostic, they'll replace the video card for free, even if you're not covered by AppleCare (and if you are, it's free regardless).
My iMac just had this problem, there were lines sometimes and just weird display issues other times. Eventually it just grayed out altogether and I couldn't use it. So it's likely your display problems will worsen if you don't get it looked at.
It took them about a week to ship the new video card over, install it, and return the iMac to me.
Good luck!

TS3274 my Ipad 3.6 is reading with syntetic voice all the botton i select, i can't slide pages and i have to tap 2 times on the srcreentoexecute the selected botton what should i do to go back to normal

my Ipad 3.6 is reading with syntetic voice all the botton i select, i can't slide pages and i have to tap 2 times on the srcreentoexecute the selected botton what should i do to go back to normal

Turn off VoiceOver
1. Press the Home button
2. Tap Settings.
3. Then double-tap Settings.
4. Tap General.
5. Then double-tap General.
6. Use three fingers on the screen to scroll to Accessibility
7. Tap Accessibility.
8. Then double-tap Accessibility
9. Tap VoiceOver
10. Then double-tap VoiceOver.
11. Tap "On" next to VoiceOver
12. Then double-tap "On" to turn it off.

MBP retina with line on all the screen! @#!!?!***!

Similar Messages

Maybe you are looking for