MBP Screen size shrunk
Hi,
I just started to experience an interesting problem with the display of my MBP 15 . After I have installed the office, my screen size has shrunken suddenly about % 2~3. If I look at the edges of the screen it is offset 2 mm from the display(plastic sides and the hinges). There are 1.5mm thick black regions from every sides of the screen. Basically, it is like a 14.5" MBP now! I can not use the full display area. My resolution is fine and I am not using any zoom option.
Has anybody experienced that problem? What is wrong?
thanks.
I have seen this a few times but in my case it is always the resolution. I would try changing your resolution to a different resolution then change it back to the native resolution of your display, which I am going to assume is 1440x900, which is the native resoultion of my display. Also are you out putting to a secondary display with mirroring on. I know that it I have my resolution on my MBP set to 1280x800 and if I connect to a data projector of the same res., my MBP won't let me output 1280x800, but it will output 1280x768, so it puts black bars top and bottom of my screen so that it can match the 1280x768 res that it is outputing to the projector. If this is your case I would also recommend disconnecting the external display and seeing if this gets rid of the black bars. Good luck. - KLP
Similar Messages
-
Toshiba Bulletin Board screen size shrunk!
Hello,
I have been using the Toshiba Bulletin Board with no problems until recently when I tried to open it and the screen appeared as a tiny rectangle (around 50 x 20 pixels) on the top left corner of my screen. I can't resize it back to it's original size. I have tried restarting the software and rebooting my computer, but it is still opening up with a really small screen size. Has this happened to anyone before? Please help, thanks!
Best,
EliseHere's your Toshiba Service Station download, Elise. Hopefully, reinstallation will solve your problem.
C.B.
C.B.
Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit -
Satellite A300 PSAG0A - Games Will Not Display in Full Screen Size
I have a large number of games installed on my computer. At least 90% of them will not display in full screen size but display in a small window with a large amount of black screen surrounding the window. I am running Windows Vista Home Premium 32 bit. However, I do not think it has anything to do with Windows as my husband runs the same games on his Toshiba Satellite L300, running exactly the same version of windows, and they all display in full screen size.
Altering the screen resolution makes no difference. And, of course, I do select the full screen option in the games.
Also, sometimes when I have been playing a game and then closed it I find that my desktop picture has shrunk to the smaller size - the same size as the window in which the game was displayed when I was playing it.
The games work fine in every other way, it is only this small screen size which is driving me nuts.
I hope that someone can help me with this!!Yes, as far as I can tell I have the latest driver. But, even this is confusing to me because....
My graphics media accelerator is Mobile Intel(R) 965 Express Chipset Family. The installed driver version is 7.14.10.1329. The release date for this is 2007-09-13, as far as I can tell from web searches.
However, on the Toshiba website for driver downloads, the available driver version is 8.2.0.1012 PV. The date is 2006-12-28. I have downloaded this driver and attempted to install it. I get the message that it has been installed but, after rebooting and checking the installed driver version is still 7.14.10.1329.
Perhaps, the 8.2.0.1012 PV version does not actually install because it is older than the currently installed version. I would have thought that the driver version with the higher number would be the newer one, but perhaps this is not the case as the dates do not seem to support this theory.
So now I ask myself, firstly, if the driver available for download on the Toshiba website is not the newest one, then why is it there?
Secondly, if it is the newest one then why will it not install on my computer? -
Screen Size and Resolution on Remote Access Mavericks
Hi Forum,
Accessing my Mac Mini remotely and it has a new install of Mavericks. The Screen size and shape and resolution isn't right, but Screen options in System doesn't give me any options. Is this because, physically, no screen is attached? Do only screen sizes and options come up when a screen is attached?
it currently shows 1280x960 [i think - just turned off the mac to get back to work] or 'scaled to fit'. Neither is right for the MBP remote access,. It was fine before i upgraded.
any ideas?Hi xerhino, and a warm welcome to the forums!
Good work on your part!
Hope your doing OK with the Snow, Ice, and Winds! -
Mirroring to my Sony TV results in my MBP screen dimensions (14:9) showing up
...instead of proprietary Sony TV's ones (16:9). I reset my MBP to factory settings and returned to Lion. Previously, on Mavericks, I was able somehow to set up this quite easy, but I forgot what I have to do to optimize screen size of mirrored MBP monitor for my Sony TV on Lion. Please, help me. I remember that (on Mavericks) it had a function "Optimize image(?) for Sony TV/computer" or smth. in sysprefs.
Kindest regards,
I.S.I'm afraid I wasn't specific enough so I'm now correcting this: when I plug in my TV I see its native 1080p resolution but what else I do see are the black bars from the right and left of the TV screen, thus getting dimensions not of my TV but those of my Mac.
Kindest regards,
I.S. -
Screen Size not fitting in the Window
For some odd reason, yesterday my MBP display started acting up. Regardless of the dimensions selected, the screen size will not fully fit in my display. As I move the mourse around the screen, the display area shimmers. At times the top menubar is not visible.
It's like it only displays about 1420 x 880 of a 1440x900 resolution at one time. Ditto for other screen resolutions.
All is up to date. I do have Parallels on this computer, but I don't think this is causing the problem. (It also ccurs when Parallels is not launched)
It might have occured when I tried to sync into an LCD Projector and had mirroring turned on ???
Anyone else experience this bizarre behaviour?
larryExcellent Larry... as always, a pleasure
It's a very useful feature to know. It enables the user to zoom right in for a close-up and right out again. After it's enabled via the key combo in my previous reply you simply press Command(Apple) + Option(alt) + = to zoom in and Command(Apple) + Option(alt) + - to zoom out. When you move the cursor the screen moves also. As you've discovered pressing Command(Apple) + Option(alt) + 8 disables/enables the feature.
RD -
New Macbook Air 11.6 or 13.3 screen size Advice needed
Hee guys!
I am going nuts trying to figure out which screen size i should take. Since i haven't got the option to compare them in real life it is really difficult. Hope some of you guys can help me out here and give me some advice or user experience.
I will use my macbook air mainly at home to surf on the web, watch movies in bed and very very occasionally on the road for leisure purposes. I already have a mac pro and an imac at home. I was planning to buy the ipad but missed a lot of functionality so the macbook air is perfect for me.
I just can't figure out which screen size i will take. Is the 11.6 to small for this kind of work? Is the difference between the 11.6 and 13.3 so small that you recommend taking the 11.6 or the 13.3?
Can somebody help me out here. Thanks in advance!
Cheers,
BrunoI have a 15" MBP I have been using for travel and as my main computer. I nearly got a Netbook last year but I thought I'd wait to see if a new "Air" would come out. I was surprised to see the 11" as an option as I was all set to get the 13".
As you, I could not put my hands on them, so I ordered both and then cancelled both. I eventually drove a good ways to try them out. I chose the 11" as it was not nearly as small as I envisioned, however this will primarily be used for travel. It is small, light, fast and has a great screen.
If you will rarely use it for travel, I'd go for the 13" for sure. I have been forcing myself to use the 11" MBA and have not only gotten used to it, but really enjoy it. However, if it were my only computer, I would be displeased. If I was using it at home for your purposes I still doubt I'd be happy with the 11".
I wear cheater glasses for fine print, but I can enlarge the font on the 11" and can read just fine. I watch movies on the 11" just fine too.
I vacillate b/t getting an iMac or an upgraded MBP to compliment this MBA, But for your purposes, again, I'd get the 13" MBA.
Goodd luck -
IBook 14" to MacBook 13" screen size
I am moving from a 14" iBook to the 13" widescreen MacBook. How do the two compare? Does the widescreen make up for the smaller overall screen size. I don't want to downgrade on size, as the 14" iBook is barely large enough.
The computer is used for basic Word, Excel, Internet, email, but lots of screens open at the same time.
Will it be OK???
FBI made th exact same upgrade and initially shared your concerns, however I can say confidently that they were wholely un-founded. The higher resolution screen of the macbook provides more screen space in a smaller area than did the ibook. The biggest difference for me was the brightness though, soo much brighter than the ibook; I hardly ever turn it up past half way!
The other posters are correct about expose though, I find i an invaluable tool. I also make use of virtuedesktops:
http://virtuedesktops.info/
It works perfectly to give you more useable screen area. -
I use iwires to connect macbook to lg tv to watch netflix.How do you increase screen size on rv.I have tried display settings ,but not working
I would guess that the HDMI port on your mac is for output only - no input, and that's what your'e attempting to do when you attach the mac to your xbox. I looked in Mactracker and it lists the HDMI port as video output for both the 13" Retina MacBook Pro and the 15" Retina MacBook Pro (your post didn't say which one you have), so looks like that is the issue..
-
the green button, top left corner of a pop-up screen on MACbook, it's supposed to enlarge the pop-up to full MAC screen size, correct? Mine does not. Sometimes it makes the pop-up screen SMALLER. Appreciate someone solving this for me.
Are you talking about the green '+' button in the top left corner? That technically doesn't enlarge it. It switches the window from the default window size to the custom size you made. You can enlarge the window by moving your mouse to the bottom right corner of the window, and dragging until you get the size you want.
MacBook -
Mirroring with apple tv screen size on projector issue
Hello, my name is Dave. I do praise and worship music at a small church.
I want to mirror my ipad on a projection TV. I have the ipad and apple tv but it's not using the entire projection screen. It only uses about 40% of the screen.
I also want to use portrait mode as landscape is to wide and won't display the entire song well.
Apple suggested keynotes but I understand that doesn't work in portrait mode. That is a biggie for me. I have notability but isthe problem the app or getting the right screen resolution ont he projector / apple tv or how can I fix this please?
Thanks,
DaveWell that's the issue my friend. I called apple and told them what I wanted to do. They told me to get those things. So ... I called abck and double checked. I asked a different person the same scenario. Same ereply. So yes I did order apple tv and airpolay. As stated it doesn't work. The image is WAY smaller than the screen and it's not scaleable at all.
I don't understand what the praying jab is about. Praying was never mentioned in the issue here was it?
Back to the issue: it's not that I didn't realize this technology isn't here I was told it was by two different techs. So when I called back to explain my problem I was bounced around apple to several departments to find the technology simply wasn't here yet as I was told. I was informed incorrectly. So appple let me return the products. The customer service person apologized and I certainly accepted.
So the issue has nothing to do with praying etc. it's simply that for some reason, using your ipad for a demo only nets you 40% of the screen size and scaling is not an option.
Wish I knew that before I placed the order as that was not how it was explained either time I called in.
Now, let's have some techs start working on this issue... else I'm about to start praying... ;-)
Dave -
How do I set the screen size of my site?
Hey guys making a site for a friend and I'm not sure on how I go about setting a screen size that can be viewed on varying screen sizes like 1280x800 and up. At the moment on my 1920x1080 display it looks fine but when I open it on her MacBook Pro (1280x800) it is cut of by half and my website has some fixed anchors which I do not allow scrolling so you are kind of stuck.
Thanks to anyone that can help, can't find a tutorial anywhereIn the normal state the screen on an iPad will rotate depending on which side is up. Any of the four sides can be up or on top and the display will look correct. But if you want to lock the display in one orientation you can. Swipe up from the bottom of the screen to reveal the Control Center. Then tap on the Orientation Lock icon. That's the icon of the small padlock surrounded by a circular arrow. That icon will appear at the top right of the display and the screen will no longer rotate. Repeat the same procedure to unlock orientation.
-
How do i make this page adapt to all screen sizes???
if i copy and paste my index code can someone please tell me if theres anything i can add so it will adapt to all screen sizes??
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Nicola Campbell Photography</title>
<style type="text/css">
#apDiv1 {
position:absolute;
width:1001px;
height:170px;
z-index:1;
left: 438px;
top: 221px;
#navbar {
height: 40px;
width: 900px;
margin-right: auto;
margin-left: auto;
border-top-style: none;
border-right-style: none;
border-bottom-style: none;
border-left-style: none;
</style>
<script src="js/modernizr-2.5.2-respond-1.1.0.min.js" type="text/javascript"></script>
<script src="js/jquery-1.7.2.min.js" type="text/javascript"></script>
<script src="js/jquery.flexslider-min.js" type="text/javascript"></script>
<script src="js/jquery.mousewheel.js" type="text/javascript"></script>
<script src="js/jquery.easing.1.3.js" type="text/javascript"></script>
<link href="css/style.css" rel="stylesheet" type="text/css" />
<link href="css/flexslider.css" rel="stylesheet" type="text/css" />
<script type="text/xml">
<!--
<oa:widgets>
<oa:widget wid="2827522" binding="#OAWidget" />
</oa:widgets>
-->
</script>
<style type="text/css">
#apDiv2 {
position:absolute;
width:901px;
height:49px;
z-index:2;
left: 487px;
top: 51px;
text-align: center;
color: #FF99FF;
font-size: 80px;
font-family: HaloHandletter;
#apDiv3 {
position:absolute;
width:409px;
height:56px;
z-index:3;
left: 768px;
top: 96px;
color: #999999;
font-family: "Adobe Garamond Pro";
font-size: 24px;
#apDiv2 div {
font-size: 100px;
font-family: HaloHandletter;
color: #999999;
#apDiv4 {
position:absolute;
width:901px;
height:449px;
z-index:4;
left: 451px;
top: 202px;
#apDiv5 {
position:absolute;
width:848px;
height:152px;
z-index:11;
left: 433px;
top: 201px;
#apDiv6 {
position:absolute;
width:200px;
height:115px;
z-index:5;
left: 1250px;
top: 138px;
#apDiv7 {
position: absolute;
width: 891px;
height: 42px;
z-index: 5;
left: 552px;
top: 174px;
#apDiv8 {
position:absolute;
width:48px;
height:50px;
z-index:6;
left: 102px;
top: 51px;
#apDiv9 {
position:absolute;
width:49px;
height:51px;
z-index:7;
left: 152px;
top: 51px;
#apDiv10 {
position:absolute;
width:49px;
height:49px;
z-index:8;
left: 202px;
top: 51px;
#apDiv11 {
position:absolute;
width:52px;
height:52px;
z-index:9;
left: 252px;
top: 51px;
</style>
<script type="text/javascript">
function MM_preloadImages() { //v3.0
var d=document; if(d.images){ if(!d.MM_p) d.MM_p=new Array();
var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0; i<a.length; i++)
if (a[i].indexOf("#")!=0){ d.MM_p[j]=new Image; d.MM_p[j++].src=a[i];}}
function MM_swapImgRestore() { //v3.0
var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc;
function MM_findObj(n, d) { //v4.01
var p,i,x; if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) {
d=parent.frames[n.substring(p+1)].document; n=n.substring(0,p);}
if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n];
for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].document);
if(!x && d.getElementById) x=d.getElementById(n); return x;
function MM_swapImage() { //v3.0
var i,j=0,x,a=MM_swapImage.arguments; document.MM_sr=new Array; for(i=0;i<(a.length-2);i+=3)
if ((x=MM_findObj(a[i]))!=null){document.MM_sr[j++]=x; if(!x.oSrc) x.oSrc=x.src; x.src=a[i+2];}
</script>
<meta name="Description" content="Welcome to Nicola Campbell Photography. I am based in Lancashire and specialise in Wedding Photography." />
<meta name="viewport" content="width=device-width" />
<link href="untitled.css" rel="stylesheet" type="text/css" />
<!-- Phone -->
<link href="iphone.css" rel="stylesheet" type="text/css" media="only screen and (max-width:320px)" />
<!-- Tablet -->
<link href="ipad.css" rel="stylesheet" type="text/css" media="only screen and (min-width:321px) and (max-width:768px)" />
<!-- Desktop -->
<link href="desktop.css" rel="stylesheet" type="text/css" media="only screen and (min-width:769px)" />
<style type="text/css">
#apDiv12 {
position:absolute;
width:1013px;
height:648px;
z-index:1;
left: 321px;
top: 299px;
</style>
</head>
<body onload="MM_preloadImages('navbaroriginalroll_r1_c1.jpg','navbaroriginalroll_r1_c2.jpg','n avbaroriginalroll_r1_c5.jpg','navbaroriginalroll_r1_c6.jpg','navbaroriginalroll_r1_c7.jpg' ,'navbaroriginalroll_r1_c8.jpg','navbar_r1_c4.jpg')">
<div id="apDiv2">
<div align="center">nicola campbell</div>
</div>
<div id="apDiv3">P H O T O G R A P H Y</div>
<div id="apDiv7"><a href="index.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('navbar','','navbaroriginalroll_r1_c1.jpg',1)"><img src="navbaroriginal_r1_c1.jpg" alt="c1" name="navbar" width="111" height="40" border="0" id="navbar2" /></a><a href="Aboutme.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Image13','','navbaroriginalroll_r1_c2.jpg',1)"><img src="navbaroriginal_r1_c2.jpg" name="Image13" width="111" height="40" border="0" id="Image13" /></a><a href="Gallery.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Image21','','navbaroriginalroll_r1_c5.jpg',1)"><img src="navbaroriginal_r1_c5.jpg" alt="c5" name="Image21" width="111" height="40" border="0" id="Image21" /></a><a href="Blog.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Image22','','navbaroriginalroll_r1_c6.jpg',1)"><img src="navbaroriginal_r1_c6.jpg" alt="c6" name="Image22" width="111" height="40" border="0" id="Image22" /></a><a href="ContactMe.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Image23','','navbaroriginalroll_r1_c7.jpg',1)"><img src="navbaroriginal_r1_c7.jpg" alt="c7" name="Image23" width="111" height="40" border="0" id="Image23" /></a><a href="Clients.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Image24','','navbaroriginalroll_r1_c8.jpg',1)"><img src="navbaroriginal_r1_c8.jpg" alt="c8" name="Image24" width="111" height="40" border="0" id="Image24" /></a><a href="Weddings.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Image25','','navbar_r1_c4.jpg',1)"><img src="navbar_r1_c41.jpg" alt="" name="Image25" width="111" height="40" border="0" id="Image25" /></a></div>
<div id="apDiv5">
<script type="text/javascript">
// BeginOAWidget_Instance_2827522: #OAWidget
$(window).load(function() {
$('#slider').flexslider({
namespace: "flex-", //{NEW} String: Prefix string attached to the class of every element generated by the plugin
selector: ".slides > li", //{NEW} Selector: Must match a simple pattern. '{container} > {slide}' -- Ignore pattern at your own peril
animation: "slide",
easing: "swing", //{NEW} String: Determines the easing method used in jQuery transitions. jQuery easing plugin is supported!
direction: "horizontal", //String: Select the sliding direction, 'horizontal' or 'vertical'
reverse: false, //{NEW} Boolean: Reverse the animation direction
animationLoop: false, //Boolean: Should the animation loop? If false, directionNav will received "disable" classes at either end
smoothHeight: true, //{NEW} Boolean: Allow height of the slider to animate smoothly in horizontal mode
slideshow: true, //Boolean: Animate slider automatically
slideshowSpeed: 5000, //Integer: Set the speed of the slideshow cycling, in milliseconds
animationSpeed: 600, //Integer: Set the speed of animations, in milliseconds
initDelay: 0, //{NEW} Integer: Set an initialization delay, in milliseconds
randomize: false, //Boolean: Randomize slide order
useCSS: true, //{NEW} Boolean: Slider will use CSS3 transitions if available
touch: true, //{NEW} Boolean: Allow touch swipe navigation of the slider on touch-enabled devices
video: false, //{NEW} Boolean: If using video in the slider, will prevent CSS3 3D Transforms to avoid graphical glitches
directionNav: true, //Boolean: Create navigation for previous/next navigation? (true/false)
controlNav: true, //Boolean: Create navigation for paging control of each clide? Note: Leave true for manualControls usage
keyboard: true, //Boolean: Allow slider navigating via keyboard left/right keys
mousewheel: false, //Boolean: Allow slider navigating via mousewheel
prevText: "Previous", //String: Set the text for the "previous" directionNav item
nextText: "Next", //String: Set the text for the "next" directionNav item
pausePlay: false, //Boolean: Create pause/play dynamic element
pauseText: "Pause", //String: Set the text for the "pause" pausePlay item
playText: "Play", //String: Set the text for the "play" pausePlay item
startAt: 0, //Integer: The slide that the slider should start on. Array notation (0 = first slide)
pauseOnAction: true, //Boolean: Pause the slideshow when interacting with control elements, highly recommended.
pauseOnHover: true, //Boolean: Pause the slideshow when hovering over slider, then resume when no longer hovering
start: function(){}, //Callback: function(slider) - Fires when the slider loads the first slide
controlsContainer: "", //Selector: Declare which container the navigation elements should be appended too. Default container is the flexSlider element. Example use would be ".flexslider-container", "#container", etc. If the given element is not found, the default action will be taken.
manualControls: "", //Selector: Declare custom control navigation. Example would be ".flex-control-nav li" or "#tabs-nav li img", etc. The number of elements in your controlNav should match the number of slides/tabs.
// Carousel Options
itemWidth: 0, //{NEW} Integer: Box-model width of individual carousel items, including horizontal borders and padding.
itemMargin: 10, //{NEW} Integer: Margin between carousel items.
minItems: 0, //{NEW} Integer: Minimum number of carousel items that should be visible. Items will resize fluidly when below this.
maxItems: 0, //{NEW} Integer: Maxmimum number of carousel items that should be visible. Items will resize fluidly when above this limit.
move: 0, //{NEW} Integer: Number of carousel items that should move on animation. If 0, slider will move all visible items.
before: function(){}, //Callback: function(slider) - Fires asynchronously with each slider animation
after: function(){}, //Callback: function(slider) - Fires after each slider animation completes
end: function(){} //Callback: function(slider) - Fires when the slider reaches the last slide (asynchronous)
// EndOAWidget_Instance_2827522
</script><!-- #main-container -->
<script type="text/javascript">
// BeginOAWidget_Instance_2827522: #OAWidget
$(window).load(function() {
$('#slider').flexslider({
namespace: "flex-", //{NEW} String: Prefix string attached to the class of every element generated by the plugin
selector: ".slides > li", //{NEW} Selector: Must match a simple pattern. '{container} > {slide}' -- Ignore pattern at your own peril
animation: "slide",
easing: "swing", //{NEW} String: Determines the easing method used in jQuery transitions. jQuery easing plugin is supported!
direction: "horizontal", //String: Select the sliding direction, 'horizontal' or 'vertical'
reverse: false, //{NEW} Boolean: Reverse the animation direction
animationLoop: false, //Boolean: Should the animation loop? If false, directionNav will received "disable" classes at either end
smoothHeight: true, //{NEW} Boolean: Allow height of the slider to animate smoothly in horizontal mode
slideshow: true, //Boolean: Animate slider automatically
slideshowSpeed: 5000, //Integer: Set the speed of the slideshow cycling, in milliseconds
animationSpeed: 600, //Integer: Set the speed of animations, in milliseconds
initDelay: 0, //{NEW} Integer: Set an initialization delay, in milliseconds
randomize: false, //Boolean: Randomize slide order
useCSS: true, //{NEW} Boolean: Slider will use CSS3 transitions if available
touch: true, //{NEW} Boolean: Allow touch swipe navigation of the slider on touch-enabled devices
video: false, //{NEW} Boolean: If using video in the slider, will prevent CSS3 3D Transforms to avoid graphical glitches
directionNav: true, //Boolean: Create navigation for previous/next navigation? (true/false)
controlNav: true, //Boolean: Create navigation for paging control of each clide? Note: Leave true for manualControls usage
keyboard: true, //Boolean: Allow slider navigating via keyboard left/right keys
mousewheel: false, //Boolean: Allow slider navigating via mousewheel
prevText: "Previous", //String: Set the text for the "previous" directionNav item
nextText: "Next", //String: Set the text for the "next" directionNav item
pausePlay: false, //Boolean: Create pause/play dynamic element
pauseText: "Pause", //String: Set the text for the "pause" pausePlay item
playText: "Play", //String: Set the text for the "play" pausePlay item
startAt: 0, //Integer: The slide that the slider should start on. Array notation (0 = first slide)
pauseOnAction: true, //Boolean: Pause the slideshow when interacting with control elements, highly recommended.
pauseOnHover: true, //Boolean: Pause the slideshow when hovering over slider, then resume when no longer hovering
start: function(){}, //Callback: function(slider) - Fires when the slider loads the first slide
controlsContainer: "", //Selector: Declare which container the navigation elements should be appended too. Default container is the flexSlider element. Example use would be ".flexslider-container", "#container", etc. If the given element is not found, the default action will be taken.
manualControls: "", //Selector: Declare custom control navigation. Example would be ".flex-control-nav li" or "#tabs-nav li img", etc. The number of elements in your controlNav should match the number of slides/tabs.
// Carousel Options
itemWidth: 0, //{NEW} Integer: Box-model width of individual carousel items, including horizontal borders and padding.
itemMargin: 0, //{NEW} Integer: Margin between carousel items.
minItems: 0, //{NEW} Integer: Minimum number of carousel items that should be visible. Items will resize fluidly when below this.
maxItems: 0, //{NEW} Integer: Maxmimum number of carousel items that should be visible. Items will resize fluidly when above this limit.
move: 0, //{NEW} Integer: Number of carousel items that should move on animation. If 0, slider will move all visible items.
before: function(){}, //Callback: function(slider) - Fires asynchronously with each slider animation
after: function(){}, //Callback: function(slider) - Fires after each slider animation completes
end: function(){} //Callback: function(slider) - Fires when the slider reaches the last slide (asynchronous)
// EndOAWidget_Instance_2827522
</script>
<div id="main-container">
<p> </p>
<div id="main" class="wrapper clearfix">
<!-- FlexSlider -->
<div id="container">
<div id="slider" class="flexslider">
<ul class="slides">
<li> <img src="hollie.jpg" width="500" height="600" /> </li>
<li> <img src="slider2.jpg" width="500" height="600" /> </li>
<li> <img src="slider3.jpg" width="500" height="600" /> </li>
<li> <img src="slider8.jpg" width="500" height="600" /> </li>
<li> <img src="slider4.jpg" width="500" height="600" /> </li>
<li> <img src="slider5.jpg" width="500" height="600" /> </li>
<li> <img src="slider6.jpg" width="500" height="600" /> </li>
<li> <img src="slider1.jpg" width="500" height="600" /> </li>
</ul>
</div>
<div id="carousel" class="flexslider" style="display:none;">
<ul class="slides">
<li> <img src="hollie.jpg" width="500" height="600" /> </li>
<li> <img src="slider2.jpg" width="500" height="600" /> </li>
<li> <img src="slider3.jpg" width="500" height="600" /> </li>
<li> <img src="slider8.jpg" width="500" height="600" /> </li>
<li> <img src="slider4.jpg" width="500" height="600" /> </li>
<li> <img src="slider5.jpg" width="500" height="600" /> </li>
<li> <img src="slider6.jpg" width="500" height="600" /> </li>
<li> <img src="slider1.jpg" width="500" height="600" /> </li>
</ul>
</div>
</div>
</div>
<!-- #main -->
</div>
<!-- #main-container -->
</div>
<!-- #main-container -->
<div id="apDiv8"><a href="https://www.facebook.com/nicola.shulmancampbell?fref=ts"><img src="Retro-Facebok-Rounded-128.png" width="48" height="48" /></a></div>
<div id="apDiv9"><img src="Retro-Flickr-Rounded-128.png" width="48" height="48" /></div>
<div id="apDiv10"><img src="Retro-Tumblr-Rounded-128.png" width="48" height="48" /></div>
<div id="apDiv11"><a href="https://twitter.com/nicola_shulman"><img src="Retro-Twitter-Rounded-128.png" width="48" height="48" /></a></div>
<script type="text/javascript">
$(window).load(function() {
$('#slider').flexslider({
namespace: "flex-", //{NEW} String: Prefix string attached to the class of every element generated by the plugin
selector: ".slides > li", //{NEW} Selector: Must match a simple pattern. '{container} > {slide}' -- Ignore pattern at your own peril
animation: "slide",
easing: "swing", //{NEW} String: Determines the easing method used in jQuery transitions. jQuery easing plugin is supported!
direction: "horizontal", //String: Select the sliding direction, 'horizontal' or 'vertical'
reverse: false, //{NEW} Boolean: Reverse the animation direction
animationLoop: false, //Boolean: Should the animation loop? If false, directionNav will received "disable" classes at either end
smoothHeight: true, //{NEW} Boolean: Allow height of the slider to animate smoothly in horizontal mode
slideshow: true, //Boolean: Animate slider automatically
slideshowSpeed: 5000, //Integer: Set the speed of the slideshow cycling, in milliseconds
animationSpeed: 600, //Integer: Set the speed of animations, in milliseconds
initDelay: 0, //{NEW} Integer: Set an initialization delay, in milliseconds
randomize: false, //Boolean: Randomize slide order
useCSS: true, //{NEW} Boolean: Slider will use CSS3 transitions if available
touch: true, //{NEW} Boolean: Allow touch swipe navigation of the slider on touch-enabled devices
video: false, //{NEW} Boolean: If using video in the slider, will prevent CSS3 3D Transforms to avoid graphical glitches
directionNav: true, //Boolean: Create navigation for previous/next navigation? (true/false)
controlNav: true, //Boolean: Create navigation for paging control of each clide? Note: Leave true for manualControls usage
keyboard: true, //Boolean: Allow slider navigating via keyboard left/right keys
mousewheel: false, //Boolean: Allow slider navigating via mousewheel
prevText: "Previous", //String: Set the text for the "previous" directionNav item
nextText: "Next", //String: Set the text for the "next" directionNav item
pausePlay: false, //Boolean: Create pause/play dynamic element
pauseText: "Pause", //String: Set the text for the "pause" pausePlay item
playText: "Play", //String: Set the text for the "play" pausePlay item
startAt: 0, //Integer: The slide that the slider should start on. Array notation (0 = first slide)
pauseOnAction: true, //Boolean: Pause the slideshow when interacting with control elements, highly recommended.
pauseOnHover: true, //Boolean: Pause the slideshow when hovering over slider, then resume when no longer hovering
start: function(){}, //Callback: function(slider) - Fires when the slider loads the first slide
controlsContainer: "", //Selector: Declare which container the navigation elements should be appended too. Default container is the flexSlider element. Example use would be ".flexslider-container", "#container", etc. If the given element is not found, the default action will be taken.
manualControls: "", //Selector: Declare custom control navigation. Example would be ".flex-control-nav li" or "#tabs-nav li img", etc. The number of elements in your controlNav should match the number of slides/tabs.
// Carousel Options
itemWidth: 0, //{NEW} Integer: Box-model width of individual carousel items, including horizontal borders and padding.
itemMargin: 10, //{NEW} Integer: Margin between carousel items.
minItems: 0, //{NEW} Integer: Minimum number of carousel items that should be visible. Items will resize fluidly when below this.
maxItems: 0, //{NEW} Integer: Maxmimum number of carousel items that should be visible. Items will resize fluidly when above this limit.
move: 0, //{NEW} Integer: Number of carousel items that should move on animation. If 0, slider will move all visible items.
before: function(){}, //Callback: function(slider) - Fires asynchronously with each slider animation
after: function(){}, //Callback: function(slider) - Fires after each slider animation completes
end: function(){} //Callback: function(slider) - Fires when the slider reaches the last slide (asynchronous)
// EndOAWidget_Instance_2827522
</script>
</body>
</html>APDivs cannot be resized.
APDivs in primary layouts won't work in Responsive Web Design.
APDivs are a very poor layout method.
For this reason, Adobe removed APDivs from Dreamweaver CC.
Example of Fluid Grid Layout with floats & margins, no APDivs required.
http://alt-web.com/FluidGrid/Fluid2.html
Nancy O. -
How can I get my movie clip to resize according to screen size?
I have a movie clip (startMenu); inside it there are buttons, text, and graphics. This is a game I am making, and it will be played on different screen sizes of Android. This is the code I have so far:
stage.scaleMode = StageScaleMode.NO_SCALE;
stage.align = StageAlign.TOP_LEFT
startMenu.addEventListener(Event.RESIZE, resizeLayout);
function resizeLayout(e:Event):void
setPosition();
function setPosition():void
startMenu.x = (stage.stageWidth - startMenu.width) / 2;
startMenu.y = (stage.stageHeight - startMenu.height) /2;
When I run it on different phones using debugging, it locks on the left hand corner, but does stretch out to fit the whole screen. What should I do?try changing
stage.scaleMode = StageScaleMode.NO_SCALE;
to
stage.scaleMode = StageScaleMode.EXACT_FIT;
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/display/StageScal eMode.html -
How can I find out the screen size of the users moniter using the Acrobat SDK?
How can I find out the screen size of the users moniter using the Acrobat SDK? I need to know how much sreen real estate that is available on the users moniter. Is there some call that I can make from the SDK to discover the maximun X and Y coordinates?
Thanks,
GregoryCurrently, I am testing on multiple moniters and it is defaulting to the moniter designated as the #1 moniter. For our purposes, this is acceptable. Once the two documents have loaded, the user can move and re-size at will.
Gregory
Maybe you are looking for
-
<?xml version="1.0" encoding="UTF-8"?> <definitions xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:soapbind="http://schemas.xmlsoap.o
-
In the attached vi, the one second loop runs at one second and can't be touched. In the ten second loop, the ten second clock is a stand in for a process that generates a finished signal. The problem is once the process is complete, to start it agai
-
Where-used list for hierarchies in queries
Hi all, has anybody an idea, how to find out, in which queries an external hierarchy is used? (BW 3.5) Thanks in advance! Regards, Carsten Bucken
-
Loop Beats, Tempo, Key not working properly
Hey all, I've discovered a really annoying problem today. When I want to cycle through my many loops, I used to be able to order them by simply clicking on "Key" at the right hand top of the loop browser. All the loops of a particular category would
-
Labview Engineers required : Pune
We are a leading developer of training solutions using simulation technology. Please visit our website www.teklearn.com for more details about our company. We require freshers or candidates with 1 year experience. The candidates should be able to dev