MBP shows strange colored images, artefacts

Hi everyone,
since a few days my MBP (2,4 GHz, Summer 2007) shows some strange artefacts on images. I attached a screenshot taken with my camera.
I tried the following to solve the issue:
- reset PRAM
- re-install 10.5.2, re-install graphics update
- change resolution and color depth
During my tests I noticed a few strange things:
- Preview.app is closed, I choose another color profile and open the attached picture, picture is okay
- switch back to standard color profile, picture in Preview.app is still okay
- Close Preview.app, reopen picture --> strange colors
Booting with other Mac in target mode doesn't help
When starting from Leopard-DVD the original Aurora wallpaper is displayed without artefacts but I can't reinstall because I already have 10.5.2 installed.
So does anybody know whats going wrong here? Tips? Suggestions?
Thank you very much in advance!
Alex from Germany
screenshot: http://img229.imageshack.us/img229/9171/dsc00944yr3.th.jpg

Welcome to Apple Discussions!
It is very difficult to know what is going on here. It seems to me that if it were a hardware issue, you would have strange colors no matter how you set the color profile. Given that the colors are off in just certain situations, I would suspect a software glitch of some sort. I am not a software expert, so I don't know if there is a good way to fix this short of reinstalling the OS. Even though you have OS X v. 10.5.2 installed, I think you could reinstall the OS by doing an Archive and Install and then updating it back to 10.5.2. You need to have a certain amount of free space on your hard drive to do this, and of course you would want to make a complete backup first just in case anything were to go wrong. And you would want to repair permissions both before and after the A&I.
Otherwise, there are a couple of things you could try. You could run the Apple Hardware Test and see if everything passes. You could also repair permissions using Disk Utility and see if that helps, particularly if you haven't done that in a while.
It's also hard for us to tell much from just one picture. It might be helpful to post a shot of the normal colors next to the strange colors. That might provide better insight to someone. Also, you can use the utility "Grab" to take a screenshot using your computer instead of a camera-- that might also make things a bit better to see.
Good luck!

Similar Messages

  • What can I do, when the viewer shows strangely fragmented images I can't work with?

    Good Evening,
    I have lately the strange problem, that the images on my viewer in Final Cut Pro X (10.0.8) are heavily distorted.
    As you can see on this Screenshot, mostly the image is like split into several channels. Sometimes, is has fragments of some sort of stored graphics from previous projects in it.
    perhabs it is important to know, that it is on a second monitor. However it used to work properly before the error started to show up periodically. Now it occurs ervy time i start to edit my footage. It is really annoying and i can't edit any longer. I used to just click on another file and it disappeared for some minutes, but now it stays the whole time.
    Hopefully you can help me with this. Is there anyone with the same problem? I can't seem to find anything on google...
    thanks in advance.
    edit: the screenshot was not uploaded.

    Welcome to Apple Support Communities
    It's possible that your hard drive is damaged. Hold Command and R keys while your computer is starting to start into OS X Recovery. Then, open Disk Utility, choose the hard drive at the top of the sidebar and look at the bottom of the window, so search for the SMART status. What does it say?
    If it has failed, make a backup of your data and get a new hard drive. You can use any 9.5 mm 2'5" SATA hard drive with your computer. You can find some at OWC > http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/

  • Bridge displays color images as b&w

    I assume this has something to do with settings in Bridge CS4, my platform is MacBook Pro OS 6.8.10.
    This question might confuse some people. To beging with, I do shoot my images in RAW files, I even have Bridge convert them to DNG files.
    Upon download the images are displayed in color as they should be for RAW files. After editing images in Camera RAW,  I convert most all images to sRGB. When some of those edited images come back to Bridge, they might be presented in B&W, though no color is lost to the file upon displaying in Photoshop, and I did not edit the file to be a B&W image. I have DNG, Canon RAW, Tif and Jpeg files, and most of these are displayed in color, but some are not, and I have not figured out the missing link just yet. So to be clear, I have Jpeg color images, displaying as b&w images, but they are color images. Only b&w images should be displayed as b&w.
    This problems started once I learned I could edit one image in photoshop out of a series of images, then after editing, i could bring the single photo file back to bridge, and then copy/paste image settings onto a groups of images in Bridge, and all those images would then have the same adjustments made to them as a batch edit adjustment.
    But now sometimes I get a B&W display on some images even when I do not apply a Bridge settings edits, and when I never edited the image for a B&W display.  I has to a setting somewhere in Bridge, and I just have not figured it out yet.
    Thanks in advance for all suggestions:

    ssprengel wrote:
    Yammer asked a pertinent question that remains unanswered—is that “settings” badge (small lines-triangles-in-a-circle) shown on the B/W image thumbnails (at least).  If you’re not sure, then include a screenshot of a few Bridge thumbnails where some are color and some are B/W, using the little camera icon on the web version of the forum messages.
    And the answer is NO!. I only have those showing up associated with the .DNG files (Camera RAW)
    Another similar question would be if you see a B/W thumbnail in Bridge, try doing a right-click (or whatever the Mac equivalent is) and choose Open in Camera Raw.  Is the image in B/W or color in Camera Raw.
    A <Control Click> (on MAC), opens the .jpeg file in b&w, as shown in the thumbnail.
    Can you upload three versions of one of the images that display as B/W:  the original PSD/raw/TIF file, a normal Save As JPG that is in color, and a Save For Web JPG that is B/W?  Use something like http://www.dropbox.com/ and post a public download link to the images, here.
    NO, I thought I explained that real well. Only the .jpeg file that was saved through the "Save for Web" processing ( that is, the a jpeg the goes through greater compression to reduce image file size for web display), is the image file process that produces the b&w thumbnail in Bridge ONLY. All opened images, of various file formats (ie: DNG, Psd, Tif, Jpeg, & Jpeg for Web), all present Color presentations (for editing in Photoshop, and or in display browsers). It is only the thumbnail of that particular jpeg formatting processing for Web Images that produces the b&w image "THUMBNAIL" in Bridge.
    When you Save As JPG or For Web, are you ever overwriting the original image with a new one or do you always save the PS-edited image with a new name?
    No, never. I leave my RAW files, as RAW originals, and work on newly names images files.
    A theory about what is happening is that Bridge uses Camera Raw to generate its thumbnails, and the images that are B/W have some embedded Camera Raw setting, perhaps pasted from a different filetype, that makes CR think the image should be rendered as B/W, but when you open the images on Photoshop, you are opening them directly, without using the Camera Raw plug-in, so any embedded settings are ignored, and the image displays in its original state without the settings having been applied.
    It makes since, (what you are saying), and it certainly does respond in that fashion. Your suggestion to open Ctrl Click, or Right Click to open the thumbnail in Camera RAW, was an interesting test, and the response was to open the previously save color image with a b&w thumbnail, into Camera RAW as a b&w image. So Camera RAW is responding to what is in the xmp settings that describes this images thumbnail to be displayed b&w. It is weird that a browser does not.
    As to what is in the window selections for the "Save for Web" editing windows, Presets for jpeg are :
    Progressive
    Optimize
    Embed Color Profile
    And I use Embed Color Profile.
    Even the Preview button at the bottom of the window, shows the color image as displaying color.
    I vaguely remember about a year ago doing some CS 4 Photoshop and Bridge web tutorials from an unnamed tutoring website and guy named D_k_ . It is his fault. Just kidding, I actually enjoy those tutorial.
    **** Okay, this is perhaps originating from Camera RAW presets, where you can apply previously made settings to other images and then saved them as Presets. Though I don't have this checked in Camera RAW ( still something goofy is going on there), I did find that in Bridge I can reset the individual "saved for Web" image thumbnail back to the the color image by :
    Right Click  (Ctrl Click, MAC) on the thumbnail
    menu down to the "Development Settings" and select :
    "Previous Conversion", and this presents the color thumbnail.
    I have now tested all the Camera RAW settings in Camera RAW, by opening an image in each one of these :
    Image Settings
    Camera RAW Defaults
    Previous Conversion
    Custom Settings
    and then reducing image file size, and saving for the web, while changing file name, and each and every one of these Settings produces a Sepia Toned thumbnail. I found out the images were a subtle Sepia Toned image by enlarging the Bridge Thumbnails bigger for a better view. So I can correct the thumbnail after it has been created, but so far, I can't get the thumbnail to be correct on first creation of the web saved jpeg image file. Regular jpeg image file thumbnails save correctly.

  • How to show each color channel image of a video on Final Cut Pro X

    Hi, Sir,
    How to show each color channel (R or G or B) image of a video on Final Cut Pro X? I found this feature is useful for the image quality editing, such as the noise reduction.

    Do you mean this?

  • Overlapped polygon boundaries of the map image shows wrong colors.

    On using mapviewer getMapImageURL function to create gif,png image, the overlapped polygon boundaries of the map image generated shows different colors compared to the map window . Please help me on this.

    Can you post example images someplace for us to look at?
    Also are you using the java or javascript api?

  • Export Problem with Color Image Washing Out

    I did an export of an image from DNG to JPG in LR4. Funny thing is, the JPG suddenly appears with a washed out look. It looks the same in Develop and Print modules also.
    It gets even funnier, because when I use Finder to check the photo, the preview of the image is fine. I also opened the image from Finder in Photoshop CS5 and it is fine there. I also opened the image in PSCS5 from LR4 with "Edit In" and again the image in Photoshop is fine. So this appears to be a view issue in LR4. I did not print out the washed out photo but I suspect it would print out as it appears in LR4.
    I've done some other image exports from DNG to JPG with other images and they do not have this problem but those were black&white converted images. However, I did check doing an export of another color image with the same result as the problem image. Here are screen captures of the DNG and the exported JPG (I was going to upload the exported JPG, but like I said it appears fine in Finder):

    My monitor calibration is just fine. I was saying that because similar
    problems are almost always due to bad monitor profiles. If you calibrate
    regularly using hardware calibration then you're probably fine. Many people
    use canned profiles from monitor manufacturers however and lightroom is
    highly sensitive to those and shows messed up color depending on the
    source. In this case however, since the restart fixed it it was likely a
    bad preview image. I have seen before that LR sometimes is lazy in
    refreshing those and can show you strange results that only get cleared up
    by forcing a preview refresh.
    Last your top screenshot DOES show that you are pushing the red in that
    dress out of the monitor gamut. You can check this in the soft proof in LR
    4 by turning on the monitor gamut warning. If you blow the color out of the
    monitor gamut the preview is no going to be accurate no matter how good
    your calibration. Just a cautionary warning.
    Sent from my iPhone

  • How do I show multiple rollover images on a page inserted dynamically (pulled out of a sql database

    How do I show multiple rollover images on a page inserted dynamically (pulled out of a sql database table) using Dreamweaver’s Repeat Region. Example: I have different products each one associated (through their productID) with two images (one that’s showing in the page and one for the rollover effect) that are pulled from a database using Dreamweaver’s Recordset. So I want to end up with a page containing row after row of images(one for every product).When moused over each image will reveal the second (rollover) image for the same product which in turn can be a link(the image itself ) that when clicked leads to a detailed page with more information about the product the image is associated with. To show row after row with images for the different products in the database table I am using Dreamweaver’s Insert Rollover Image command and then the  Repeat Region – I have no problem to complete the steps, to insert the image and the rollover one at once and set the paths so they are pulled dynamically depending on the productID they are associated with .I have also no problem to apply the Repeat Region so not only the first image associated with the first product in the table is shown but all of them-a routine and standard procedure when using the Repeat Region to dynamically generate and display multiple rows of data. However, when I preview the page the rollover effect is lost –the images are shown but when moused over the second  image does not  show. The problem is caused when the Repeat Region is applied-once again I am allowed to apply it but the rollover stops working, a kind of interference. ANY SOLLUTION PLEASE, ANY WORK AROUND.

    I gotta tell you, using multiple images for rollover effects is going to be a big challenge in your dynamic scenario. 
    If this were my product page, I would use thumbnails with a bit of CSS opacity or filters to desaturate and make them full opacity/color on mouse over.  Nice effect with much less bandwidth. Easily done globally with CSS code.
    Two examples:
    http://alt-web.com/GALLERY/GalleryTest.php
    http://alt-web.com/TEMPLATES/CSS-Semi-liq-photo-sheet.shtml
    Nancy O.

  • Satellite A300-202 - External display turned a strange color

    Hi,
    I have a Satellite A300-202 with a ATI Mobility Radeon HD 3650, and after upgrade from vista to windows 7, my external display turned a strange color, seemed to lose the red color. Never show the white color, in which should show the white color shows the color blue.
    I have uninstalled and installed again the graphic card drivers and update the new drivers but dont solved this trouble. My external monitor it's ok because I have tried with other laptop and don't have this trouble. I have also tried my laptop with other monitor and have the same trouble.
    Anybody ever had this problem, someone who can help me?
    Thanks,

    Hi Xardas,
    Yes I have problems only with the external monitor.
    I tried both. Now I have the new beta version to the windows 7 64bits, downloaded from the amd/ati site, but I have tried also with the version available in the toshiba drivers page to my A300-202, and had the same problem.
    Yes I have installed the new version of the BIOS too.
    Thanks,
    Message was edited by: Zagga

  • What shows in color separations is not what prints

    I have a document originally created in InDesign CS3 with text in a 100%K black, not rich black. When printed directly from InDesign, text prints with only black ink.
    When I export to PDF, with black settings to output accurately (not rich black), the Acrobat 8 Professional color separations only show this text on the black separation, as is to be expected. However, when printed, the text is rich black with all CMYK ink tones present.
    I am printing to a Konica 7830dxn PostScript printer, but since the document prints fine to this printer directly from InDesign, I don't see it as causing the problem.
    What is going on? Other users have also had issues with this coming from InDesign, but I'm pretty sure it's an Acrobat problem, not an InDesign problem. I'm quite open to being proven wrong, of course.

    Well, I've tried just about all the options available. The printer driver gives me five options for color management - I've tried "Konica Color Matching," "PostScript Color Matching," and "No Color Matching," to no avail.
    "Print in Grayscale" wouldn't work for the color images in my document, and it won't let me pick "Use ICC Profile."
    I don't understand why it changes when it goes to Acrobat. Printing from InDesign with the default "Konica Color Matching" works fine. I'm stuck.

  • Problem of acquiring color image

    Now I try to acquire color image but show in grayscale real time with filter it before. The result is so slow on monitor. How can I do to acquire the filter image faster.Any help very appreciated.

    First make sure that you have the most efficient kind of aqusition running.IMAQ LL Ring Without Timeout is the most efficient continous aquisition scheme I know of.
    The you must make sure that your conversion and filetering code is efficient. As far as conversion is concerned make sure and use the extract color plane VI and extract the luminance plane. This is the fastest way to do color to gray scale. You can play around with Vision Builder and the Script>>Performace Meter Option until you get a filtering script which is faster than your frame rate.
    Hopoe this help,
    Amaury Rolin
    NI Applic
    ations Engineer

  • MBP shows VGA display, but none connected

    I am facing a quite strange problem. My MBP shows an external VGA display but there is none connected. I can see it in the display preferences. I already checked the hardware but there is nothing wrong with it. I connected a real display via dvi to vga and it works fine. Anyone who knows this problem and knows what to do about it?

    Found a possible solution.
    Do you have bootcamp installed?
    I restarted into windows xp and checked my nvidia settings and made it was set to "Use One Monitor"
    Then restarted and Voila!
    Hope it can help

  • My screen don't show some colors

    Hi
    I have a weird problem with my colors. I have a mail-box,and new mails have a different color. But this color cant be showing by my screen,,,,it looks like the old mails I have already. When I go to another computer with a LCD screen the color is clear.
    I have tried any color profile and I have used colorsync to calibrate that s...! But my screen cant show this color.
    what can I do to fix this?

    I apologize for confusing the issue.  I'll try to be more precise this time.  I have 11 images in a folder that I have in "My Computer.'  That same folder was at one time imported into LR but i'm really not sure if all ot the images came in with the import. Today I added a couple of images to that folder and decided to iport the folder again into LR so tht I'd have the new images.  Before I did the import I noticed in LR that only 8 of the images were there but I figured that when I imported the folder tha remainder of the images would appear. So I do an "Import," I select the folder from the browser and click on "Import All files in Folder," and I get a "Problem With Importing Files" window which lists 8 of the images in the folder; however, the 8 that it lists are some of the images that were previoulsy imported (which makes sense), at least one of the "new" images that I added today (which should not be listed), and at least one other image that has been in the folder and should have come in with the current import. If I click the "Show in Library" button the "Already in Catalog" menu bar is highlighted and it says there are *8 images there. Those are teh same images that were in the catalog to begin with. If I go back and repeat the import but instead of clicking the "Show in Library" button I click the "Import" button the Preview window shows the 3 "missing" images. So I click "Import" (I'm actually going through this process now) i get an "Import Results" window listing the 3 images and it tells me they already exist so I click "Import." I then go back into LR ,open the catalog that they should have been imported into but they are not there.
    I appreciate your trying to help me. I hope I made it clear this time.

  • Strange colors and stripes after importong Photo

    Hello,
    I've got a problem in Adobe Lightroom and Adobe Camera Raw (Photoshop CC).
    There are strange colors and stripes in some of my photos after importing. The strange colors and stripes are not in the original photo; I can not see them in my camera and Lightroom does not show them in the grid where I can select which photo's I want to import.
    Sometimes the strange colors appear in the library, but sometimes they only appear when I'm already in the developping module.
    Sometimes when I re-import the photo the strange colors and stripes are gone, but sometimes they're not.
    The problem is also seen in Camera Raw (Photoshop CC) with the same pictures. I'm not sure what causes this problem.
    When I export this photo, the strange colors and stripes are also in the exported JPEG file.
    See picture:
    The problem appears with photo's taken with my Canon EOS 550d, but it happens so rarely that I don't think my sensor gives these problems. Even more the fact that I cannot see the problem at the LCD-screen of my camera and the fact that te problem sometimes disappears when I re-import the photo to my computer. The problem appears with photo's taken with different lenses and on differen SD-cards. So i can not say what causes the problem.
    Does anyone know what might cause this problem?
    And can anyone tell me how to prevent or solve the problem?
    Thanks in advance!

    I didn't say "not the camera, not the lenses, and not the computer"
    I did say it could be the hard drive; I did say it could be the memory (those are parts of the computer), and if the camera is not writing the photos properly to the camera card, it could be the camera (which is rare, but you can't rule that out at this time).
    But yes, its not the lenses

  • Newbie Question My Photos print and show desaturated color

    Hi I have a feeling there is a very simple answer to this. My photos which I mainly process in Lightroom 3 (with some adjustments in Photoshop CS3) print and show desaturated colors wether or not they are RAW or JPEG. I have applied camera profile settings such as landscape, to raw files but when I export them as a jpg and send to a photo shop to print they are still desaturated. Also when I send a stand alone file to a media contact it shows desaturated to them. If I deliberately adjust my monitor to Pro RGB it appears to show the true colour that others are seeing. I have attempted to over saturate to get a reasonable print but clearly this is not correct.
    Proberbly an easy question for someone out there but I am having trouble resolving it.
    Many Thanks
    Steve

    Please click on the link below and read the entire site carefully.  Then follow the instructions to the letter.
    http://www.gballard.net/psd/cmstheory.html
    In a nutshell:
    • Calibrate and profile your monitor.  Set the resulting profile as your monitor profile.  Never use a device independent color space (such as ProPhoto RGB, Adobe RGB or sRGB) as your monitor profile.  Only use your calibrated profile specific to your monitor.
    • honor the embedded profile in each file;
    • when sending your images to a run-of-the mill lab, convert your images to sRGB (do not use assign profile; use CONVERT to profile) and embed the sRGB profile in them.
    The above site explains it all to you.
    Wo Tai Lao Le
    我太老了

  • RGB channel doesn't show the imported images...

    RGB channel doesn't show the imported images... i can see them in seperate blue, red and green channel but not in RGB...please help....
    (I'm using Photoshop CS6)

          The problem appears in every image I try to open (whatever format or origin). The images I try to import come from rendering in Autodesk 3ds max , from my camera (sony cyber-shot ) or are just stock images... I had no problem with photoshop cs5.1....
           Here's my system info:
    Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x32
    Operating System: Windows Vista 32-bit
    Version: 6.0 Service Pack 2
    System architecture: Intel CPU Family:6, Model:7, Stepping:10 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1
    Physical processor count: 2
    Processor speed: 2394 MHz
    Built-in memory: 3038 MB
    Free memory: 1387 MB
    Memory available to Photoshop: 1671 MB
    Memory used by Photoshop: 60 %
    Image tile size: 128K
    Image cache levels: 4
    OpenGL Drawing: Enabled.
    OpenGL Drawing Mode: Advanced
    OpenGL Allow Normal Mode: True.
    OpenGL Allow Advanced Mode: True.
    OpenGL Allow Old GPUs: Not Detected.
    Video Card Vendor: ATI Technologies Inc.
    Video Card Renderer: ATI Mobility Radeon HD 4650
    Display: 1
    Display Bounds:=  top: 0, left: 0, bottom: 900, right: 1600
    Video Card Number: 1
    Video Card: ATI Mobility Radeon HD 4650
    OpenCL Unavailable
    Driver Version: 7.01.01.849
    Driver Date: 20090208190620.000000-000
    Video Card Driver: atidxx32.dll,atidxx64,atiumdag.dll,atiumdva.cap,atiumd64,atiumd6a,atitmm64
    Video Mode: 1600 x 900 x 4294967296 colors
    Video Card Caption: ATI Mobility Radeon HD 4650
    Video Card Memory: 1024 MB
    Video Rect Texture Size: 8192
    Serial number: 92298703051332501777
    Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6\
    Temporary file path: C:\Users\User\AppData\Local\Temp\
    Photoshop scratch has async I/O enabled
    Scratch volume(s):
      C:\, 224,5G, 166,2G free
    Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6\Required\
    Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6\Plug-ins\
    Additional Plug-ins folder: not set
    Installed components:
       A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112  
       ACE.dll   ACE 2012/01/18-15:07:40   66.492997   66.492997
       adbeape.dll   Adobe APE 2012/01/25-10:04:55   66.1025012   66.1025012
       AdobeLinguistic.dll   Adobe Linguisitc Library   6.0.0  
       AdobeOwl.dll   Adobe Owl 2012/02/09-16:00:02   4.0.93   66.496052
       AdobePDFL.dll   PDFL 2011/12/12-16:12:37   66.419471   66.419471
       AdobePIP.dll   Adobe Product Improvement Program   6.0.0.1654  
       AdobeXMP.dll   Adobe XMP Core 2012/02/06-14:56:27   66.145661   66.145661
       AdobeXMPFiles.dll   Adobe XMP Files 2012/02/06-14:56:27   66.145661   66.145661
       AdobeXMPScript.dll   Adobe XMP Script 2012/02/06-14:56:27   66.145661   66.145661
       adobe_caps.dll   Adobe CAPS   6,0,29,0  
       AGM.dll   AGM 2012/01/18-15:07:40   66.492997   66.492997
       ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56  
       aif_core.dll   AIF   3.0   62.490293
       aif_ocl.dll   AIF   3.0   62.490293
       aif_ogl.dll   AIF   3.0   62.490293
       amtlib.dll   AMTLib   6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00)   1.000000
       ARE.dll   ARE 2012/01/18-15:07:40   66.492997   66.492997
       AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
       AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
       Bib.dll   BIB 2012/01/18-15:07:40   66.492997   66.492997
       BIBUtils.dll   BIBUtils 2012/01/18-15:07:40   66.492997   66.492997
       boost_date_time.dll   DVA Product   6.0.0  
       boost_signals.dll   DVA Product   6.0.0  
       boost_system.dll   DVA Product   6.0.0  
       boost_threads.dll   DVA Product   6.0.0  
       cg.dll   NVIDIA Cg Runtime   3.0.00007  
       cgGL.dll   NVIDIA Cg Runtime   3.0.00007  
       CIT.dll   Adobe CIT   2.0.5.19287   2.0.5.19287
       CoolType.dll   CoolType 2012/01/18-15:07:40   66.492997   66.492997
       data_flow.dll   AIF   3.0   62.490293
       dvaaudiodevice.dll   DVA Product   6.0.0  
       dvacore.dll   DVA Product   6.0.0  
       dvamarshal.dll   DVA Product   6.0.0  
       dvamediatypes.dll   DVA Product   6.0.0  
       dvaplayer.dll   DVA Product   6.0.0  
       dvatransport.dll   DVA Product   6.0.0  
       dvaunittesting.dll   DVA Product   6.0.0  
       dynamiclink.dll   DVA Product   6.0.0  
       ExtendScript.dll   ExtendScript 2011/12/14-15:08:46   66.490082   66.490082
       FileInfo.dll   Adobe XMP FileInfo 2012/01/17-15:11:19   66.145433   66.145433
       filter_graph.dll   AIF   3.0   62.490293
       hydra_filters.dll   AIF   3.0   62.490293
       icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615  
       icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615  
       image_compiler.dll   AIF   3.0   62.490293
       image_flow.dll   AIF   3.0   62.490293
       image_runtime.dll   AIF   3.0   62.490293
       JP2KLib.dll   JP2KLib 2011/12/12-16:12:37   66.236923   66.236923
       libeay32.dll   The OpenSSL Toolkit   0.9.8g  
       libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)  
       libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0  
       LogSession.dll   LogSession   2.1.2.1640  
       mediacoreif.dll   DVA Product   6.0.0  
       MPS.dll   MPS 2012/02/03-10:33:13   66.495174   66.495174
       msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1  
       msvcp71.dll   Microsoft® Visual Studio .NET   7.10.3077.0  
       msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1  
       msvcr71.dll   Microsoft® Visual Studio .NET   7.10.3052.4  
       msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       pdfsettings.dll   Adobe PDFSettings   1.04  
       Photoshop.dll   Adobe Photoshop CS6   CS6  
       Plugin.dll   Adobe Photoshop CS6   CS6  
       PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (32 bit)   3.0.0.383  
       PSArt.dll   Adobe Photoshop CS6   CS6  
       PSViews.dll   Adobe Photoshop CS6   CS6  
       SCCore.dll   ScCore 2011/12/14-15:08:46   66.490082   66.490082
       ScriptUIFlex.dll   ScriptUIFlex 2011/12/14-15:08:46   66.490082   66.490082
       shfolder.dll   Microsoft(R) Windows (R) 2000 Operating System   5.50.4027.300  
       ssleay32.dll   The OpenSSL Toolkit   0.9.8g  
       tbb.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406  
       tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406  
       TfFontMgr.dll   FontMgr   9.3.0.113  
       TfKernel.dll   Kernel   9.3.0.113  
       TFKGEOM.dll   Kernel Geom   9.3.0.113  
       TFUGEOM.dll   Adobe, UGeom©   9.3.0.113  
       updaternotifications.dll   Adobe Updater Notifications Library   6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   6.0.0.24
       WRServices.dll   WRServices Friday January 27 2012 13:22:12   Build 0.17112   0.17112
       wu3d.dll   U3D Writer   9.3.0.113  
    Required plug-ins:
       Accented Edges 13.0
       Adaptive Wide Angle 13.0
       ADM 3.11x01
       Angled Strokes 13.0
       Average 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Bas Relief 13.0
       BMP 13.0
       Camera Raw 7.0
       Chalk & Charcoal 13.0
       Charcoal 13.0
       Chrome 13.0
       Cineon 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Collada 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Color Halftone 13.0
       Colored Pencil 13.0
       CompuServe GIF 13.0
       Conté Crayon 13.0
       Craquelure 13.0
       Crop and Straighten Photos 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Crop and Straighten Photos Filter 13.0
       Crosshatch 13.0
       Crystallize 13.0
       Cutout 13.0
       Dark Strokes 13.0
       De-Interlace 13.0
       Difference Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Diffuse Glow 13.0
       Displace 13.0
       Dry Brush 13.0
       Eazel Acquire 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Embed Watermark 4.0
       Extrude 13.0
       FastCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Fibers 13.0
       Film Grain 13.0
       Filter Gallery 13.0
       Fresco 13.0
       Glass 13.0
       Glowing Edges 13.0
       Grain 13.0
       Graphic Pen 13.0
       Halftone Pattern 13.0
       HDRMergeUI 13.0
       IFF Format 13.0
       Ink Outlines 13.0
       JPEG 2000 13.0
       Lens Blur 13.0
       Lens Correction 13.0
       Lens Flare 13.0
       Liquify 13.0
       Matlab Operation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Measurement Core 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Mezzotint 13.0
       MMXCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Mosaic Tiles 13.0
       Multiprocessor Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Neon Glow 13.0
       Note Paper 13.0
       NTSC Colors 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Ocean Ripple 13.0
       Oil Paint 13.0
       OpenEXR 13.0
       Paint Daubs 13.0
       Palette Knife 13.0
       Patchwork 13.0
       Paths to Illustrator 13.0
       PCX 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Photocopy 13.0
       Photoshop 3D Engine 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Picture Package Filter 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Pinch 13.0
       Pixar 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Plaster 13.0
       Plastic Wrap 13.0
       PNG 13.0
       Pointillize 13.0
       Polar Coordinates 13.0
       Portable Bit Map 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Poster Edges 13.0
       Radial Blur 13.0
       Radiance 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Read Watermark 4.0
       Reticulation 13.0
       Ripple 13.0
       Rough Pastels 13.0
       Save for Web 13.0
       ScriptingSupport 13.0
       Shear 13.0
       Smart Blur 13.0
       Smudge Stick 13.0
       Solarize 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Spatter 13.0
       Spherize 13.0
       Sponge 13.0
       Sprayed Strokes 13.0
       Stained Glass 13.0
       Stamp 13.0
       Sumi-e 13.0
       Targa 13.0
       Texturizer 13.0
       Tiles 13.0
       Torn Edges 13.0
       Twirl 13.0
       Underpainting 13.0
       Vanishing Point 13.0
       Variations 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Water Paper 13.0
       Watercolor 13.0
       Wave 13.0
       WIA Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Wind 13.0
       Wireless Bitmap 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       ZigZag 13.0
    Optional and third party plug-ins: NONE
    Plug-ins that failed to load: NONE
    Flash:
       Mini Bridge
       Kuler
    Installed TWAIN devices: NONE
    Thank you both for the interest!

Maybe you are looking for