MBP slow after startup after Time Machine restore process.

Hello all,
I have a 2.4 ghz MBP and was dual booting Ubuntu hardy and Leopard using the rEFit boot manager. I got tired of Ubuntu and decided to go back to a single OS. I reinstalled OS X erasing all data on the HDD, and then restored from a Time Machine back-up. Since then, start-up is very slow. I get a bright white/grey screen that last about 6-10 seconds before the apple logo appears and the chime sounds. I thought it might be a bad TIme Machine back-up so i tried a different one. I had no luck with this method, or repairing disk permissions etc. in Disk Utility.
What is causing this change in start-up time?
Can i fix it?
Any help is much appreciated THANKS!!

I know it may sound goofy, but worth a try...
Many times after erasing my Windows / Bootcamp partition I experienced extremely slow startups. What I found to fix that was to open System Preferences -> Startup Disk and make sure your Mac OS X is selected for the default to startup your system. Anytime I experienced this problem, Mac OS X was not selected.
Hope it works for this also.

Similar Messages

Can't Boot After New HD + Time Machine Restore

So a couple days ago my 27" iMac running Snow Leopard started making some weird noises and stalling out. Annoyed, I talked for a couple hours with apple tech support which eventually lead me to run an Apple Hardware Test. This test returned the error
"Alert! Apple Hardware Test has detected an error.
4HDD/11/40000000 SATA(0,0)"
I scheduled an appointment at the Genius Bar, and they replaced the hard drive.
After that I got it home and did a System restore from my time machine backup. It finished fine, but when I restarted it got stuck on the grey apple screen with the spinning dial thing.
I called apple back and they had me do a couple things like repair disk, verify disk, and one person had me reboot into this command line mode and type some stuff in. Nothing worked. After that They had me try to reinstall the OS first from archive, and next by erasing the hard drive and doing it. Both times the install fails with a big yellow exclamation point saying that it couldn't install support files and the OS couldn't be installed.
Any ideas how to fix this?
I'm currently trying to restore from my time machine backup again, but I'm not hopeful.

Here's what I got - apologies for any formatting peculiarities.
The problem: 10.6.6 mac won't boot after time machine restore to disk.
Further symptoms: Booting with Command-v shows several errors: usually blued and loginwindow collapse with errors from launchd. Errors will be of the style "dyld: Symbol not found: CSSMOID_APPLE_TP_MACAPPSTORERECEIPT" and other CommerceKit / CommerceCore framework errors.
A solution: Your Framework Security library may be an older version (possible cause with Time Machine below). The easiest way to fix this is to find another, working 10.6.6 Mac, and update the Security library on the broken machine.
Identifying if you're affected:
1) Boot the broken machine into "target" mode - hold "Command-t" during boot until the [Firewire|http://itunesu.utah.edu/terms/images/Firewire_Icon.png] icon appears.
2) Connect the broken machine to the working 10.6.6 machine with a firewire cable.
3) On the working machine, the disk of the broken machine should mount.
4) Open Terminal
5) Run "ls /Volumes" - the name of disk you mounted should be there (in this example, we'll use "Macintosh HD".)
6) Typing in the path of the broken machine, run:
<pre>
nm /Volumes/Macintosh HD/System/Library/Frameworks/Security.framework/Versions/A/Security | grep random_fd | cut -d. -f2
</pre>
(this does a dump of the library, looking for the version value)
If this comes back with the value 22457 (or less?), your Mac is not booting because it does not have the updated version of the Security library, which is required in 10.6.6 since Snow Leopard added the Appstore / Commerce framework.
Fixing if you're affected:
1) First, make sure the working 10.6.6 Mac has a correct version of the framework:
<pre>
nm /System/Library/Frameworks/Security.framework/Versions/A/Security | grep random_fd | cut -d. -f2
</pre>
For 10.6.6, this should be at least "22458"
2) *Be extremely careful at this point* - Make sure on the mounted disk (not the machine you are working on!) run the following
<pre></pre>
2a) Make a backup of the broken library
<pre>
mkdir /Volumes/Macintosh HD/savedLibrary
cp /Volumes/Macintosh HD/System/Library/Frameworks/Security.framework/Versions/A/Security /Volumes/Macintosh HD/savedLibrary
</pre>
2b) Copy the working version over the non-working version:
<pre>
cp /System/Library/Frameworks/Security.framework/Versions/A/Security /Volumes/Macintosh HD/System/Library/Frameworks/Security.framework/Versions/A/Security
</pre>
3) Eject the mounted disk from the working Mac, disconnect the firewire cable, and reboot the "broken" Mac. It should come up.
If it doesn't, you have problem(s) that are probably outside the scope of this. I'd also suggest restoring your original security library that you saved off.
Suspected cause:
It appears that Time Machine never recorded the change to the Security library after the update. If the library hadn't changed, the machine should have failed to boot like it did after restore the moment a 10.6.6 update was applied.
Inspecting the contents of my Time Machine backups before and after updating shows that Time Machine never updated the Security Framework library - why is still not 100% determined, but restoring from it is definitely broken. Combing through the backup databases on my Time Machine disk:
(I upgraded to 10.6.6 on January 6)
<pre>
for name in 2010-12-30-093337 2011*
do
echo -n "In backup on ${name}, version of Security library is: "
nm "${name}/Macintosh HD/System/Library/Frameworks/Security.framework/Versions/A/Security" | grep random_fd | cut -d. -f2
done
</pre>
In backup on 2010-12-30-093337, version of Security library is: 22457
In backup on 2011-01-04-100707, version of Security library is: 22457
In backup on 2011-01-05-082402, version of Security library is: 22457
In backup on 2011-01-06-092846, version of Security library is: 22457
In backup on 2011-01-07-094827, version of Security library is: 22457
In backup on 2011-01-10-093559, version of Security library is: 22457
In backup on 2011-01-11-110542, version of Security library is: 22457
In backup on 2011-01-12-094137, version of Security library is: 22457
In backup on 2011-01-13-103238, version of Security library is: 22457
In backup on 2011-01-14-113145, version of Security library is: 22457
In backup on 2011-01-18-112856, version of Security library is: 22457
In backup on 2011-01-20-114953, version of Security library is: 22457
In backup on 2011-01-21-103642, version of Security library is: 22457
In backup on 2011-01-24-102321, version of Security library is: 22457
In backup on 2011-01-27-002508, version of Security library is: 22457
In backup on 2011-01-27-011931, version of Security library is: 22457
In backup on 2011-01-27-104406, version of Security library is: 22457
In backup on 2011-01-27-114322, version of Security library is: 22457
In backup on 2011-01-27-123928, version of Security library is: 22457
In backup on 2011-01-27-134523, version of Security library is: 22457

Lots of permission errors after a full time machine restore.

So I replaced my hard drive in my MacBook Pro with a 500GB and when in reinstalled leopard i jest did a time machine restore, now if I check the permission i have this long list that it jest can not seam to fix. Here is the list. What should i do about it?
Reading permissions database.
Reading the permissions database can take several minutes.
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/DVD.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSettings.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSources.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Movies.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Music.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Photos.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Podcasts.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/TV.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/BackRow.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "Applications/iTunes.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
Permissions differ on "Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents/ CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
Permissions differ on "Applications/iTunes.app/Contents/Resources/iTunesHelper.app/Contents/CodeResou rces", should be -rw-rw-r-- , they are lrw-rw-r-- .
Warning: SUID file "System/Library/Filesystems/AppleShare/afpLoad" has been modified and will not be repaired.
Warning: SUID file "usr/bin/setregion" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
Warning: SUID file "System/Library/Printers/IOMs/LPRIOM.plugin/Contents/MacOS/LPRIOMHelper" has been modified and will not be repaired.
Permissions differ on "System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/CodeRe sources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/CodeResourc es", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/BlackAndWhiteEffect.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/CubeTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/DissolveTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/DropletTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/FadeThroughBlackTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/FlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/MosaicFlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/MosaicFlipTransitionSmall.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/PageFlipTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/PushTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/RevealTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/SepiaEffect.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/TwirlTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/WipeTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
ACL found but not expected on "Applications".
Permissions repair complete

This has been reported elsewhere in these forums.
They are not errors, they are warnings and informative statements, but not real errors and they can be ignored as you will find when you search
for the other posts about this exact same topic.
If you uncheck the Show Details" box in DU, you will only see real errors and these will not show up.
Yes they are annoying, and if you read my other post you get more information.

Time Machine restore process will take 59 hours!?

I just received my iMac 17" Core Duo from my local apple store where they had replaced my LCD. Prior to taking it in, I did a full Time Machine backup (about 100GB). I booted up from the Leopard install DVD and selected from the menu-"restore system from backup" after selecting my backup drive it then proceeded to do the restore. So far (about 40 mins) its at 1.0% with *59 hours remaining*.
Is this normal???
Details: Connecting to my mac via USB with a Seagate 500GB external drive. iMac has capacity of 149 GB.
Thanks for any help!

Hi! That's probably correct though as it starts making progress the time may decrease faster than its estimates. That's the reason for having a clone, it's faster. Tom

Mail Crashes After a Full Time Machine Restore.

mail doesnt want to open... it tries rebuilding (is that the term) then it crashes.
a full restore was just done since the hard drive died completely and was replaced. restore was done by booting from the snow leopard cd and selecting restore from the utilities menu.
any ideas on what can be done?
there are around 80k messages in mail if that matters.

Welcome to Apple Discussions
TimeMachine is supposed to begin deleting "old" files when a SSD or HD reaches ~80% full. Also if TimeMachine is on when you are away from your backup drive for long periods it stores "cached local backup files"
It is essential to keep 10% free space minimum, 15-20% empty space ideal (more doesn't hurt) on your boot drive to keep your machine performing well.

Macbook Pro will not boot after full time machine restore

I have a 15-inch Macbook Pro, current model with the i7 processor, which I purchased in August 2010. Last week, when I tried to turn it on, it would not boot (just got to the gray screen with the Apple logo and spinning wheel). I took it in for repair and was told that it had a bad hard drive. The hard drive was replaced and I got the computer back yesterday.
Everything looked good, it turned on, so I did a complete restore from my Time Machine backup on my Time Capsule, following the instructions on this page: http://docs.info.apple.com/article.html?path=Mac/10.6/en/15638.html
The restore was successful and the computer prompted me to restart. I clicked the button to allow the restart and now I am back to the gray screen with the Apple logo and spinning wheel. It won't boot again.
I also looked at this discussion (http://discussions.info.apple.com/message.jspa?messageID=10924233) and it sounds like the person here was able to get his computer to work after doing the Time Machine restore in the same process I used, so I don't know what else to do.
I don't live near an Apple store, so it would be great if I could figure this out myself. Thanks for any help!

skylaneval wrote:
I have a 15-inch Macbook Pro, current model with the i7 processor, which I purchased in August 2010. Last week, when I tried to turn it on, it would not boot (just got to the gray screen with the Apple logo and spinning wheel). I took it in for repair and was told that it had a bad hard drive. The hard drive was replaced and I got the computer back yesterday.
Everything looked good, it turned on, so I did a complete restore from my Time Machine backup on my Time Capsule, following the instructions on this page: http://docs.info.apple.com/article.html?path=Mac/10.6/en/15638.html
See #E8 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum).

FCP X does not recognize projects and events on USB drive after a time machine restore of the MBP macintosh disk

FCP X does not recognize projects and events on USB drive after a time machine restore of the MBP macintosh disk.
I upgraded from an i5 to an i7 15" MBP and restored my files using my time machine backup. All seemed to go ok, except I had to use the migration assistant because on the initial boot the MAC didn't recognize the backup database on the USB device. MAybe this is a hint.
Since when I start FCPX it too cannot finnd the project or event directories.
Before my upgrade, I had a choice of files either on the Macintosh disk or the 2TB USB disk.
Now only files on the Macintosh are accessible to FCPX. The USB drive is visible under events and project but it finds no projects or events.
Please help if you can.
Thanks
Barry

Thanks... alas no one has responded.
I think I have the structure that you are recommending.
I have a root level directory (Final Cut Events) with the files in them.
The puzzling thing is that it used to work before the migration!.
Anyway I'm going to move the contents to the root and see what happens.
On a slightly different note...
I also posted a question about CPU utilization. Can I ask a question or two?
While rendering a short clip, I noticed burst of disk activity when the render started (likely loading the media files into ram since I have about 4Gigs available, then almost no activity while the render is happening, then more disk activity when its done.
However the cpu activity is not as high as I would have expected since rendering requires a lot of cpu.
What is your experience? I know some render is done by the GPU, but in my older i5 the CPU was about 100%, now in my i7 its about 50%.
Please look at the attached utilization for CPU and disk activity.
Thanks for any thoughts... Barry

Gray Screen After Time Machine Restore

I have an iMac running Snow Leopard (most recent update) I recently tried norton antivirus for the mac but found that it slowed down my mac too much so i uninstalled it with the uninstaller. The error i got was a circle with a line thru it at startup. After following steps on disk repair and permission repair i still couldnt get rid of this so I did a restore from time machine. I used the original disk (not the snow leopard upgrade disk) to reach the time machine restore. After trying 2 different backups I'm now getting the gray screen that asks me to restart my imac. I've unplugged everything else. The internal hard drive and ram are all factory.
Any suggestions for a frustrated iMac user ???

HI Corey,
There are no Mac viruses in the wild. Unfortunately, you selected the worst A/V software possible. Here's a list of Mac users who installed Norton. http://discussions.apple.com/search.jspa?search=Go&q=norton
After trying 2 different backups I'm now getting the gray screen that asks me to restart my imac.
That's a kernel panic.
Thing to do now is a complete erase and install from your SL disc.
http://support.apple.com/kb/HT3910
or here...
http://macs.about.com/od/snowleopardmacosx106/qt/cleaninstall_sl.htm
Carolyn

Reactivate software needed after Time Machine Restore?

So I'm getting ready to upgrade the HD in my MBP and I am going to try the time machine restore feature (hopefully) to reload the new HD to exact status of old HD. From what I've read this is pretty easy to do. What I can't find in my searches is if all the apps on my HD will need to be reactivate after this procedure.
Once I restore the new HD does all the software need to be reactivated? I have a ton of apps that I have no idea where the serial #'s are and would be screwed if I had to reactivate them. Or does the restore to the new HD work seemlessly so that it's as if I didn't even swap HDs.

The only 'problem' I've ever had after a restore was with the MS Office for Mac suite 2011. It required me to either re-enter my activation code or sign-on to my Office 365 account (I did the latter).
Never had a problem with Adobe products, though. I can't guarantee that you won't, of course, but I've personally never had a problem with Adobe products.
Clinton

Problem after Time Machine restore

So i just did a time machine restore since i replaced the HD in my old macbook, and whenever i start up the machine it stays at grey screen and eventually pulls up a folder with a ? mark. But if I hold down option at start up and select the drive, it boots fine, even if i do a restart from start up settings in system preferences it works fine. Just if I'm booting after shut down, it won't work without holding option key, Is there something I did wrong, or anyway I could fix it?

Are the specs for the replacement drive, especially for power consumption, similar to those for the original drive? If not, it may be that new drive takes too long to spin up from a cold start or some similar, specification related issue is causing this problem.
You also should make sure that the partition scheme of the drive is not MBR & that the file format of the startup volume is "Mac OS Extended (Journaled)." Disk Utility will tell you both of these characteristics when you select the drive & the volume respectively from the list on the left. (Look at the bottom of the window for this info.)
You can also try resetting PRAM & then reselecting the startup disk in the system preference.

Time machine restore resets after 1% completed

I am at the multi-language welcome screen, I get to the appropriate Time Machine restore backup and it begins. After 1.2% completed, it just takes me back to the multi-language welcome screen. No restart, no chimes, like nothing happened. I'm restoring from a 2-week old backup via USB on my 4 month old 15' MacBook Pro.
Please! I need this thing for work tomorrow and am desperate, the restore will take 9 hours and I'm getting frustrated.

Check that the data cable to the drive is firmly inserted at both ends. If the drive is bus-powered but has an AC adapter, connect the adapter. If it's connected through a hub, connect it directly to a built-in port. Try another cable. Failing all that, continue as below.
Starting from a fresh installation of OS X, set up a new administrator account and log in. You should now be able to enter Time Machine and restore your user data from a snapshot.* I suggest you do this in two stages. Quit all applications except the Finder before you begin.
Restore all the visible items at the top level of your home folder.
Hold down the option key and select Go ▹ Library from the Finder menu bar. Enter Time Machine and restore all items in the Library folder. Log out and log back in as soon as the restore is complete.
Any other invisible folders or files at the top level of your home folder that you want to preserve will have to be restored separately. For most users, that isn't necessary.
You'll have to reinstall all third-party applications from scratch, or restore them from another kind of backup, if you have one.
You'll have another problem if this is a new computer, or if you erased the startup volume: Time Machine won't continue your previous snapshot series, but will instead try to begin a new one, starting with a full copy of all files. There might not be enough space on your backup volumes for that. There are different ways of dealing with that situation, depending on your needs. The easiest way is to set your backup drives aside, if possible, until you're sure you'll no longer need the data on them, then erase them and start over. Meanwhile start a new backup on one or more empty storage devices. If that solution isn't workable for you, ask for instructions.
*If you don't see any snapshots in Time Machine, exit the time-travel view and then hold down the option key while selecting
Browse Other Backup Disks...
from the Time Machine menu, which has an icon that looks like a clock running backwards. Select the backups of your computer by its previous name. If you don't have the Time Machine menu, open the Time Machine preference pane in System Preferences and check the box marked
Show Time Machine in menu bar

After a time machine restore my iPhoto won't open

A few days ago my iPhoto went completely crazy. I had quadruples of some pictures and events. My photo amount increased at least 300 percent to 222,000 pictures. After reading about what to do I did a time machine restore to the iPhoto before this problem happened. After restoring my iPhoto it won't open at all anymore. I have version 9.5.1 of iPhoto. I have not yet downloaded the Yosemite upgrade because a program that I use often is not compatible. How do I get my iPhoto to open with the restores iPhoto?

How did you do the "restore?" Did you restore the library from the pictures folder?
Barry

Lost "Last Import" after Time Machine restore

I recently had a hard drive fail on me but was up to date on Time Machine backups. So after a rebuild of 10.6.2, I restored my system from Time Machine. But now, I noticed that the last batch of pictures I imported before the hard drive went, are gone. They are still listed in iPhoto under Last Imported. And their Events Descriptions are showing up but all pictures are just empty grey squares, leading me to believe the links were lost. So I opened up the contents of the iPhoto Library and sure enough those file folders were gone also.
Any ideas what could have happened? Maybe ways to get them back?
I'm assuming the pictures are gone at this point - about 215 including my son's 3rd Birthday. Fortunately though, I have lo-rez versions on my iPhone.

Experienced this myself today with the latest iPhoto on a Time Machine restore after a failed hard drive.
I would guess the cause is that iPhoto writes the 'last import' into a cache file, and not to the Originals folder on the hard drive until the next import. Since Time-Machine excludes many cache files from its backup to save time and space from meaningless change (caches should always be able to be rebuilt), the photos were never copied to the backup drive.
However, this is merely a guess, and is the only reason I could fathom as to why Time Machine did not back up photos that have been on the disk for over a month. Quick testing with local files wrote directly to the disk, which makes me think it may be only from a camera or some other device, but I am not sure exactly.
If someone happens to find a way to get back the photos, let us know. Exploring the iPhoto library in Time Machine yielded me nothing, neither did rebuilding the cache database or looking for orphaned photos.

ALL Photos missing after Time Machine restore (help)

So, I accidently formated the wrong drive while in Windows, (big oops) which gave me the opportunity to take Time Machine for a test drive.
I put the DVD in, and was able to restore from the TIme Machine drive. Very impressed! Everything came back just as I had left it except - whats this? The default Leopard wallpaper instead of a picture of my son? Huh strange, I thought. Until I noticed I had no photos in iPhoto.
There seems to be reminents of photos in the iphoto database - the size is 1.3gb instead of the 7gb it used to be. But 0 photos in iPhoto 08.
I went into iPhoto and choose File/Browse Backups. I selected Nov 8th, which was the last day of my backup and showed all 7000+ photos, and clicked "Restore All". This brought up something odd - a 2nd iPhoto icon in the dock, which showed a progress bar for the restore. Once the restore was completed, I still had a 2nd iPhoto icon the the bar, which was iPhoto running - but no photos in iphoto! I exited the 2nd iphoto, which disappeared, and launched my normal Iphoto icon. Still no photos! (That just seems odd that it would launch iPhoto with a 2nd icon)
So, I moved my iphoto database, and launch iPhoto in order to create a fresh database - thinking maybe that was the issue. I then did File/Restore again, and went through the whole processes again, including the odd 2nd icon. Still, no photos! And another 1.3gb iphoto database!
Is it normal for a Time Machine restore to not include your photos? Surely you are not supposed to restore them separately from within Iphoto?
What do I do now? At this point, everything went very well - except no photos! Which is awful and not at all expected! 7000+ family photos! At least, if I ask iPhoto/Time Machine to restore 'all photos' you would think it would restore 'all photos' - not show a progress bar, and then show me no photos!
p.s. I just tooked at the iPhoto Library. The 1.3gb is in /Data/ which contains folders 2000-2007, my Events, and thumbnails of all the photos - but no actual photos (the 'Originals' folder is missing).
I then went back in time, and found the 8gb iPhoto Library database. I supposed I could copy it over manually via Time Machine, and not iPhoto's Restore/TM - but - i'm so far off track of how this should have went I don't know what to think!
p.s.s. So I did just that - copied the 8gb iPhoto Library manually from TM, and pasted it in place. I help down option, and launch iPhoto, selecting the 8gb library - and BOOM... no photos!
Something is #$%# up here.
Message was edited by: metzen79

This is what it says in the help file:
Reverting to a previous Mac OS X version
If you’ve used Time Machine to back up your computer, you can easily revert to a previous version of Mac OS X if you’re experiencing trouble after installing an update.
IMPORTANT: Reverting to the previous version of Mac OS X will erase any additions or changes you’ve made to the files on your computer after installing the new version of Mac OS X. To save new or revised files, copy them onto a different disk or back them up using Time Machine before you follow these instructions. Use Time Machine only if you’re reverting to a previous version of Mac OS X 10.5 (Leopard), since Time Machine is not available with Mac OS X 10.4 or earlier.
To revert to a previous version of Mac OS X:
Insert the disc you used to install the new version of Mac OS X, and double-click the Install Mac OS X icon.
In the Installer, choose Utilities > Restore System From Backup.
In the Restore Your System dialog, click Continue.
Select your Time Machine backup volume.
Select the Time Machine backup you want to restore. To restore your computer to the state it was in before you installed a new version of Mac OS X, choose the most recent backup.
Follow the onscreen instructions.
If you backed up any individual files as described under the Important message above, you can restore them now. If you backed them up using Time Machine, recover them using the Time Machine application. (You’ll find the Time Machine application in the Dock or in the Applications folder.)
Hope this helps
Denisimo

Computer wont boot after time machine restore

Hi Guys,
I did a time machine restore last night and after it completed and i did a restart the computer gets stuck on the gray screen. I waited like 2 hours and it still doesn't get past that screen. I have tried every boot shortcut including target mode, single user mode etc. One problem is that i have disabled sounds so i cant hear the chime therefore not knowing when to push and hold the "t" or "c" button.
Am i doing something wrong? when do i start holding c or t?
Even when i put the mac osx dvd in it won't even boot from that. also tried holding c and booting from the dvd and that doesn't work.
please help

Begin with the usual diagnostics in hopes of successfully booting your macbook. As Eric mentioned, have you tried booting with the Option key ?
If that fails, try the following, before forced to a re-install of the OS:
1: Boot up the machine via Safe Boot by holding the shift key. Since your volume is off, ideally you want to wait a second or two where the chime would come in. Note that if the safe boot is successful it will take some more time to boot as it checks for disk errors. Make sure and repair your permissions if you get through !
2: If that fails reset your PRAM, http://support.apple.com/kb/HT1379

MBP slow after startup after Time Machine restore process.

Similar Messages

Maybe you are looking for