MBP starts without supposed to do

my macbook pro starts sometimes nights but i dont have set starting times or something like that. i know that this problem is both an old and a common one.. but i didnt find any solutions on it. is there nothing one can do to stop that?

Hi bagus,
Most of the issues you have were addressed in the firmware and software update to 10.4.6. If you have an external drive or iPod to use for backup or it even sounds like you have a .Mac account, since you referred to iDisk issues, you should back up your important data. After that I would do a clean install and then run all updates in Software Update. Then the firmware update. After all that repair permissions. Then you will see many of those issues gone.

Similar Messages

  • Sender File Adapter always "Polling interval started" without complete

    Hi,
    I have problem with sender file adapter suddenlty the status from Communication Channel Log monitoring always with polling started without completed.
    4/25/11 11:40:33 AM   Polling interval started. Length: 10.0 seconds
    4/25/11 11:40:23 AM   Polling interval started. Length: 10.0 seconds
    4/25/11 11:40:13 AM   Polling interval started. Length: 10.0 seconds
    4/25/11 11:40:03 AM   Polling interval started. Length: 10.0 seconds
    Normal :
    4/25/11 11:41:50 AM   Polling interval started. Length: 10.0 seconds
    4/25/11 11:41:50 AM   Processing finished successfully
    4/25/11 11:41:50 AM   Processing started
    4/25/11 11:41:40 AM   Polling interval started. Length: 10.0 seconds
    4/25/11 11:41:40 AM   Processing finished successfully
    4/25/11 11:41:40 AM   Processing started
    I have tried to stop and start the channel but still no luck. This problem only happen for this particular communication channel others channel is working fine.
    Please advise other solution before i need to restart the java engine since this in the production environment. The problem is some of the process was delayed because this issue. CC was delayed to pickup the file.
    Thank You in advance.
    FL

    Hi Abhistek,
    Thank you for your correction. It was typo.
    Which assumption is correct ?
    1. All 3 instance running together in the same time ?  or
    2. Either 1 of the instance running once time manage by clustering setting.
    Example :
    15:01:00   ---> A
    15:02:00  -
    > A
    15:03:00  -
    > B
    15:04:00   -
    > B
    Currently :
    15:01:00   -
    > A    
    15:01:00   -
    > B (lock)
    15:02:00  -
    > A
    15:02:00  -
    > B (lock)
    It seems all 3 instance lose control from clustering ?
    Regards
    FL

  • NOT STARTING WITHOUT SUPPLY

    I have hp compaq610 running on windows8!
    1)my laptop is not starting without a/c supply.
    2)battery showing 30% full "plugged in,not charging"
    3) and if i remove adapter wire after starting starting,laptop is going off!!
    plzz someone help i tried uninstalling driver but didnt worked

    How was it solved?

  • I have a G5 iMac. The browser and other apps were deleted by mistake.  If I had a working browser I think I could recoverss the other apps I need.  Question is .... Where to start without a browser?

    I have a G5 iMac. The browser and other apps were deleted by mistake.  If I had a working browser I think I could recover the other apps I need.  Question is .... Where to start without a browser?

    Well, go to a library or friends house & download file.  Do not expand. copy to zip drive. etc.
    Here is how to download iCab from the terminal.  the curl command reads html page.  I fished out the download link.  I think you want 501.  To get link, click on what download you want.  In the page that comes up . Look at the http source.  search for auto & copy link.
    http://icab.de/dl.php
    Macintosh-HD -> Applications -> Utilities -> Terminal
    # copy the following line to terminal.
    curl -O  http://www.costantini-net.de/iCab/iCab305_UB_OSX.zip
    # Or
    curl -O http://icab.clauss-net.de/icab/iCab_501_UB.zip
    # my termina commands.  Put file in home folder.
    mac $ curl -O  http://www.costantini-net.de/iCab/iCab305_UB_OSX.zip
      % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                     Dload  Upload   Total   Spent    Left  Speed
    26 6592k   26 1729k    0     0  44360      0  0:02:32  0:00:39  0:01:53 40984^C
    mac $ pwd
    /Users/mac
    mac $ ls i*
    iCab305_UB_OSX.zip
    mac $ ls -l i*
    -rw-r--r--   1 mac  staff       1M Jul 16 13:49 iCab305_UB_OSX.zip
    mac $

  • BPEL PM starts without oracle lite db

    HI all,
    my BPEL PM standalone starts without launching oracle lite db, i've checked the startorabpel.bat and everything is alright with this file,
    i think the problem comes from the modification of obsetenv.bat: i've added
    some libraries in the " @REM List of Orabpel and Orabpel related libraries " section, but even when i removed the libraries i've added the problem remains, can anybody help me please?

    Install agian and if it work correct congrats, if not in the start in the star_olite.bat delete the folowing line in bold.
    C:\OraBPELPM_1\integration\orabpel\bin\olsv2040.exe /debug
    exit
    The idea of this is to check when ever the olite has a problem or if the olite did not stat up.
    From a previous consulting, I installed BPEL in one PC and I had problem running the olite because of JVM Error. The olite indeed started, but exited inmediatly it was run, so i had to remove the exit line to see the error.

  • Could macbook starts without battery by using adapter as power source!!??

    Hi all
    I have macbook black early 2008 model. My battery is damaged as it falls in water.
    I have experienced that If the adapter is plugged with macbook and macbook is on and then i remove the battery ...its remain on...
    My question is this that could macbook starts without battery using the power adapter as power source.
    Thanks
    Regards
    Abdul Azeez

    Yes it will start and run. The downside is your MacBook will run slower and if you accidentally pull out the plug it will shut off immediately and you'll lose any work that hasn't been saved. I suggest replacing the battery when you can.

  • Keeps crashing on start up! Can start without core audio, but crashes with!

    Hello
    I've run into a strange problem, when starting Logic it keeps on crashing after core audio initialize. I have tried starting whilst holding control to select start without core audio. This works and the app starts, i then go to audio preferences to select a audio driver to use. This is the strange bit i think?
    It only gives me my audio input options, Built MIC, Built Input/ Built Input Aggregated. It does not give me an output option. I recall this not being normal? I am right or wrong here?
    I also have a motu 828 which when connected and selected also crashes the program. It was all working fine one day and not the other, i have tried a reinstall twice also. I have no idea of what is happening so any insight and help would be great.

    I have finally solved the problem. Do not use melodyne with LOGIC 8 it will not work! To run both on the same machine the melodyne rewire files must be removed from application support.

  • IMac won't start without install disc

    Hi, I'm new to all of this. I tried resetting my admin password using install disc on my iMac as I'd forgotten it. Now iMac won't start without disc. If disc is ejected on restart apple logo flashes between no entry sign and folder with "?" on it. Will start up with install disc in, but then wants me to choose language and install OS. Tried repairing and verifying HD and all seems ok. Tried holding option key and selecting HD on startup, but same outcome - choose language and install OS. How do I get back to normal desk top? Do I have to install OS again? Will I lose data? Please, please help! Thanks.

    It should only take a minute or so at most to boot from the DVD.
    If your sure you have the correct Install Disk for that iMac, I'd start over. Then if it still doesn't work then perhaps a trip to your Local Apple Service Provider with the Disk or Disk and iMac is in order.
    http://www.apple.com/buy/locator/service/
    Alternately using the correct Disk as per the following article, see if you can run the Apple Hardware Test? > http://support.apple.com/kb/HT1509

  • SCEP Service started without any malware protection engine; AV signatures out of date; AS signatures out of date

    Our new pooled VDI collection reports the following errors in SCCM 2012 R2 regarding SCEP:
    Service started without any malware protection engine; AV signatures out of date; AS signatures out of date
    The Windows Update service is disabled and it is by design when we create a new collection, althought the service is enabled on the master template.
    SCEP is not up-to-date, real-time protection is off, and this is causing us compliances issues.
    Any ideas?

    Hi,
    How do you set the SCEP to get definition updates?
    The following blog might help.
    http://gerryhampsoncm.blogspot.com/2013/08/config-mgr-2012-endpoint-protection_4240.html
    (Note: Microsoft provides third-party contact information to help you find technical support. This contact
    information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.)
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Magsafe has no light, MBP starts but just spins on the Apple Logo, more...

    This is a friends 17" 2.16 model
    Magsafe has no light but works, MBP starts but just spins on the Apple Logo, the battery has no charge. I have a 2.4ghz model so checked the charger... it works AND lights up on mine. The battery (a replacement battery, 8 months old) does not take a charge in my mbp (had it installed for 30"). I connected via firewire in Target mode - it didn't mount so I tried to "repair" the connected HD via Disk Utility.... after about 5" a simple message came up saying that it was unable to repair the drive.
    Ran Tech Tool Pro and only managed to run scan blocks on it which at least mounted the drive so I could retrieve files etc but no other diagnostic would work.
    Did a SMC on it - no change.
    When I tried starting it and held down any combination of alt, control, shift keys etc it would just immediately go into shutdown.
    Anybody have an idea what might be wrong and how much it might cost to repair?

    Does your friend's 2.16 MBP have the original hard drive? If so, the hard drive could be failing. It would be 3 years old, and the useful life of a hard drive is 3-5 years.
    Have you tried your known good battery in your friend's MBP? If the battery won't charge with a known good adaptor and a known good battery after a SMC, then there could be a problem with the Left I/O Board.
    I have heard of a dying hard drive affecting the optical drive as well. If TTP was not able to do any diagnostic test, I am wondering if the problem might be with the optical drive.
    The worst possibility would be a bad logic board.
    Have you tried a PRAM reset?
    http://support.apple.com/kb/HT1379?viewlocale=en_US
    These are just some guesses. With a known good battery and adaptor cable, you may be able to determine if the Left I/O Board is OK. However, you may end up needing to go to Apple or an AASP for a real diagnosis. If you are anywhere near an Apple Store, you can make an appointment at the genius bar and get an evaluation for free. If it's just a hard drive or the left I/O Board, the repair should not be too much. If the logic board, it could be quite expensive.
    Good luck!

  • [CS2Mac] Indesign crashes after start without error.

    Hi,
    i send a version of our plugin to a customer, he installed it on his mac. And now his InDesign CS2 crashes immediately after start without an error message. When he removes the plugin, everything works fine.
    Can i create some kind of logfile from InDesign to see where it stops? I can't install a debug version there because it's a customers mac. And the same plugin works here on my computer.
    thanks for any help
    Klaus Friese

    Hi Klaus!
    Did you try to remove any persistent data of session and preferences saved by InDesign before launching it with your plug-in installed?
    Ciao
    Emanuele

  • My i-touch music is interrupted by voice memo. the music also fast forwards, changes tracks or stops and starts without touching the i-touch

    my i-touch music is interrupted by voice memo. the music also fast forwards, changes tracks or stops and starts without touching the i-touch. can you help?

    Try the standard fixes:
    - Rest. Nothing is lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defauslts/new iPod.

  • ICloud on my MBP started dropping calendar entries

    iCloud on my MBP started dropping some recurring calendar entries right before my eyes, not all, but some.  The entries are still visible on my iOS devices.  What up?  I am also still getting reminders on my MBP for the no-longer-visible appointments. Just started today.  The same situation on my MBA too.  Just dont get it.  Server issue?
    Update: one of my reminders just popped up, and the corresponding entry became visible.  Crazy!  Any ideas?

    Go to Settings>Mail,Contacts,Calendars>Default Calendar and be sure you have selected an iCloud calendar as your default and not something else like On My iPhone, a Google calendar, etc.  If you haven't, make this change, then add a new event and see if it appears on your calendar on icloud.com now.
    If your settings are correct and new events still aren't appearing on icloud.com, add any missing calendar events from your phone to your calendar on icloud.com.  Once the calendar on icloud.com is up to date, go to Settings>iCloud, turn Calendars to Off, choose Delete from My iPhone when prompted (they will still be in iCloud), then after a minute or so, turn Calendars back to On.  Then add a new event on your phone and see if it appears on your calendar on icloud.com now.

  • Firmware update 1.0 window appears everytime the MBP starts up.

    After a succesfull firmware update the firmware update 1.0 windows appears everytime the MBP starts up.
    It says: the firmware of the computer is updated to version 1.0.0. of the Mac Book Pro updater.
    Can someone help me to let it disapear?
    Thanks.

    No I can't help you to make it dissapear but I would like to warn other users to perhaps wait for Apple to get their act together and create a firmware update that actually works and does not break machines...
    After the upgrade of my MBP 2.16GHz the wifi interface will no longer connect to my WPA Personal protected network. Before the upgrade this would work flawlessly...

  • Mirrored Display. How to sleep MBP display without closing LID to keep the machine vented?

    I just got my hands on a 15" MBP and I currently have a third party Display that I have connected to my Display output port. Mirrored display, and tried the clamshell mode but machine got quite hot by running in it that way. I was wondering if there is any way to keep the lid open while the mirrored mode on the external Display still runs?
    Also, if there are any third party software that does give me flexibility as to which display to sleep and such, and at least have control over the display output options, that would be a gem. Appreciate it if anyone has that info?
    Thanks a lot for taking time to help! Happy holiday and a great year to come for all!
    Miles of smiles,
    Jimbo

    Captfred,
    I've tried what the article suggests but it only seems to work if you want to wake the computer when it is sleeping or the screen saver is on.
    What I am trying to find out is how to start the computer when it is turned off without having to open it. I would imagine that there would be some key combination on the keyboard or perhaps a way to program the on/off button on the side of the Apple external display to do that.
    Any ideas ?
    Thanks in advance.

Maybe you are looking for