MBP sudden boot problem, gray screen then black zombie

Hello all -
I've had leopard installed on my MBP since Oct 27th and it's been running great, although I've noticed several times when I shut down, the machine really hadn't - I'd stick it in my briefcase only to find that the mac was on and the battery was down 50% an hour later. Searching the boards, I'm gonna assume that I have the same problem as those reporting the "screen goes black after a few minutes" problem. That's all weird enough, but last night it shifted into high gear.
I used the machine for a couple hours, nothing special, just some web browsing. I shut it down as normal. Later I came back to it and the power button did not turn it on... I then realized that the HD was still spinning. I touched a bunch of keys, worked the pad, clicked power a couple times thinking it was in some kind of weird sleep, nothing. So I held the power down long enough for a forced "off."
Then I turned it on, it chimes, comes to the gray screen, spinning gear goes for a bit (normal amount of time) then the blue screen flashes for the tiniest fraction of a second and the screen goes black. I waited for a bit and after a little while I noticed the faintest outline of dialog on the screen - I could not read it, but it looked to have four buttons. I pressed the Enter key, the dialog disappeared and the HD spun about for a bit, but the screen never came back. I forced it off again.
Starting it this time I went to Single User start up, then did a fsck -fy and the system reported OK. after Exit I watched closely as the exact same thing happened - it got to the Starting Login Window application line, the screen flashed blue for a fraction of a second and the thing went black again. (I did this cycle a few times, since I read one thread here that mentioned similar circumstances and said it worked againn after the 4th try...)
I tried a Safe Mode start, it took a lot longer to start, but essentially the same thing happened. One additional symptom - once when I was doing the reboot I think I saw a "Parallels Hypervisor" line before the screen blanked out. I was hoping someone here might be able to let me know how to ditch that (there's no /etc/rc3.d and such that I'd recognize, so I'm not sure where the startup items are...) - I'd like to push the possible notion that Parallels has somehow messed with the machine. BTW - I did an upgrade, rather than a clean install on the machine. Parallels has been on the machine the whole time, and no new software has been installed since I installed Leopard.
I am unfortunately about a thousand miles away from my Leopard disk for the next 5 days and was really not expecting to be without my machine... so I hope anyone here might have some more things I can try to get the little bugger back online. Even deep-deep-deep tech options and symptoms might help, I'm unfraid to try most anything.
TIA,
/perk
(Please note that my profile machine is my desktop, not my MPB)

No worries mate. Creeped me out pretty big, but when my Leopard DVD did the same thing upon bootup I knew the problem was weirder than what I had thought.
Glad to hear you got it all straight as well.
/p

Similar Messages

MAC OSX 10.3.6 having Boot Problems(Gray Screen with Spinning wheel all the Time) ,How to restore all the files without Mac Startpup Disc,still is not possible i want to download full CD from Apple Site, Is It Possible to Download!

Hi Frnds,Small Favour for me,...
MAC OSX 10.3.6 having Boot Problem(Gray Screen with Spinning wheel all the Time) ,How to restore all the files without Mac Startpup Disc,still is not possible i want to download full CD from Apple Site, Is It Possible to Download!, Windows 7 is working perfectly , can i restore any files in MAC OSX 10.3.6 through Windows 7, or i need the MAC OSX 10.3.6 Bootable Files i need to enter the MAC OSX....

Hi Frnds,Small Favour for me,...
MAC OSX 10.3.6 having Boot Problem(Gray Screen with Spinning wheel all the Time) ,How to restore all the files without Mac Startpup Disc,still is not possible i want to download full CD from Apple Site, Is It Possible to Download!, Windows 7 is working perfectly , can i restore any files in MAC OSX 10.3.6 through Windows 7, or i need the MAC OSX 10.3.6 Bootable Files i need to enter the MAC OSX....

Suddenly boot problem - no post - then crashes in windows

hi there! first off, here's my system:
P4 2.80C @ FSB 200 HT enabled
Corsair DDR400 2-2-2-5
865PE Neo2-LE
Sapphire Radeon 9500 no OC
Chieftec 360W
Western Digital 120GB & Seagate 20GB no RAID
BIOS - default settings
WinXP
Alright, my system has always worked fine in the past, but yesterday it started acting up, making more noises than usual, CPU working hard at low workload, and things generally being slow. This morning when i turned my PC on, it showed the first boot page, but wouldnt continue, post or accept any keypresses. I turned it off and tried turning it on later, and it was able to boot completely. So i was in windows, and everything was moving slowly. "My Computer" wouldnt open, my browsers would crash and i wasnt able to launch any games or benchmarks. then - BOOM - the computer turned itself off. so i startet up again, suspecting a virus and whatnot. A friend said it was probably that winBLAST thing that was going around earlier. so i tried to remedy it by doing "shutdown -a", and running a symantec blastfix.exe, which didnt find anything. i started a full virus scan with norton 2003, but didnt make it all the way through, as the computer would crash at some point. not at any special event, just after a random amount of time.
Hope that's enough information, will gladly supply more if needed.
bry - out

Check if your CPU Fan is failing as overheated CPUs will caused smiliar problems. Also check for other hardwares if they are burnt or suspicious of overheating.

Progress bar at gray screen, then shuts down

Hello. I work in a private high school and a staff member handed me his MacBook Pro (13-inch, Mid 2012). He says that in the process of doing updates (he was non-specific about what it was updating), he shut the display and now it won't ever fully boot. This is what I observe: Connect power adapter to it, confirm laptop is fully charged, press power button. At the initial gray screen, the black apple shows and a black progress bar appears at the bottom (not the spinning gear), which gets part-way through and then promptly shuts down. Sometimes it gets through the progress bar and the spinning gear for a few seconds before it shuts down.
I've booted to the Recovery Partition and run Disk Utility on the physical volume... and the physical hard drive appears to be fine. Since I've left my external USB drive with Maverick's installed, I'll have to wait until tomorrow to attempt cloning the drive and/or pulling off a copy of the user accounts. Once I get a copy complete, I may try a full restore, but...
In the meanwhile, does anyone have any ideas as to what might be causing this problem?
I have seen several other related threads in these forums, but most suggest that it may be a physically damaged hard drive, which isn't appearing to be the case here (at least not yet). Another post suggested that it may be a video issue, but it boots fine into the Recovery Partition. Do you think it's possible that one of the updates was a firmware update that never got properly installed due to his shutting the display-lid? Another post suggested trying to boot in Safe Mode, but that also fails similarly.
I'm open to ideas and suggestions.
-- David Allie

Here is the Apple support article regarding the symptom you describe:
http://support.apple.com/kb/TS3148
I trust that the data on the MBP is backed up.
Have you tried a safe boot?
http://support.apple.com/kb/HT1564
Ciao.

Intel iMac will not boot past gray screen

Intel iMac will not boot past gray screen
my system:
new (month old) 24" intel imac, 2.8 ghz, 4 gb ram.
running: leopard (upgraded from tiger, which was pre-installed at purchase), installed 10.5.1 update right before this huge problem occurred.
install discs on-hand: two-disc tiget set, single leopard upgrade disc.
what led to this:
i wanted to install windows using bootcamp on a 50 gb partition.
at this point i was running leopard 10.5
i followed all bootcamp instructions, printing out the guide, as well. once i got into the windows setup, i was prompted to choose a partition to install windows. unlike the bootcamp guide, which showed three partitions, one clearly labeled "bootcamp", i saw only one partition. not wanting to risk writing over my mac partition, i quit the setup and rebooted the mac os. after some googling around, i looked for firmware updates (didn't need any), and then software updates. i decided to try updating to 10.5.1.
i then ran through boot camp again, deleting my previous windows partition, creating a new one, and moving forward as before. once again, i was only shown one partition to choose from in the windows setup. i exited the setup again to reboot through the mac os, but this time, i was only given a blank gray screen.
here's what i have tried so far:
booting from a CD, holding down the C or D keys: no response (in fact, i have to restart the computer holding down the mouse button to be able to eject the CD)
booting with option key held down: gray screen
booting with option key held down with external bootable firewire drive attached: the firewire drive appears as a boot icon, and i can click on it within a five second window, but then the screen freezes after that time period, and nothing changes
booting into target mode while attached to another mac: gray screen (no firewire icon, and drive never shows up on other mac)
resetting NVRAM: i'm able to hear the boot chimes, but no difference in performance. gray screen every time
Safe boot: nothing but a gray screen
Verbose mode: gray screen
Single user mode: gray screen
Single user mode with firewire drive attached: occasionally (not every time), i am able to get the white on black terminal to show up. from here, i'm able to run fsck, but it appears to only be checking the firewire drive. i have tried several times to boot from here, and once it took me to a blue screen with movable arrow cursor, but it never went beyond this.
is there anything else left to try before taking it to apple?
any help would be greatly appreciated.
thanks,
Casey Burns
Casey Burns Illustration and Design
http://CaseyBurns.com

I'd call Apple support at this point. You'll need
to put this issue on the record.
Call U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273)
The wait may be long for an agent to come on the line
so expect that and have some other stuff to do in the meantime.
If you have the applecare protection plan, I'd ask about "onsite"
service.
I like your work ! Good luck !
Slim
Message was edited by: slimpikkunz

IMac Does not boot past Gray Screen

iMac does not boot past Gray Screen. 2008 24" Intel iMac running Mountain Lion with 1TB hard drive.
Problem started yesterday while I was web surfing, and my iMac frooze and shutdown. I rebooted and could only get as far as the gray screen.
On bootup the following things happen:
Startup tone
Gray screen with Apple, and gear spins below Apple.
Once the gear stops spinning, nothing happends.
Troubleshooting steps I have tried:
removed all devices connected to iMac and rebooted, but same symptons occur.
booted into Safe mode and run disk utilites.
     Disk Utilities found no errors on the drive, but did find two permission issues that it was able to fix.
          First permission issue:
                   "Group differs on library; Should be 0; group is 80"
          Second permission issue:
                    "Permissons differ on library; Should be drwxr-xr-x; They are drwxrwxr-t"
Disk Utilities says it fixes these issues and then I reboot, but get the same problem.
I reboot back into Safe Mode and run Disk Utilities and it discovers the same problems listed above with Permissions. It says it fixes them, I reboot, but the same problem occurs. Its as if we are stuck in some sort of loop process.
Booted into Single User Mode and ran the following command:
     /SBin/fsck -fy   it reports back, Volume Apprears to be ok.
I reboot, same issue !
Performed SMC Reset, Rebooted, same issue
Performed PRAM Reset, Rebooted, same issue.
Booted into Recovery Partitioin (Command R) and ran disk utilities. It found the same permission issues listed above. It fixed them. I rebooted. Same problem still.
While in safe mode, I preformed a full time machine backup.
I am out of ideas. Any help would be greatly appreciated.

Hello,
I reboot back into Safe Mode and run Disk Utilities and it discovers the same problems listed above with Permissions.
You can ignore repeated "fixes" it's not really a problem, if it says completed repairs that's all that's needed.
Luckily it boots in Safe Mode, here's basically the steps to try to find out what it is...
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons
Though I'm suspecting some corruption to your OS at the moment.

IMac G5 boots to gray screen with Apple logo only

iMac G5 boots to gray screen with apple logo only.
What I've tried:
Won't boot to safe mode.
Reset PRAM several times.
Won't boot to install disk with "C" depressed at startup.
Will boot to screen showing HD and arrow buttons when "alt" depressed at startup. But clicking HD icon and proceed arrow just goes back to the gray screen with apple logo. Note the HD icon has a blue "x" symbol.
With install disc in, will boot with "alt" depressed at startup to three icons, HD, install disc, and apple hardware test. Both HD and install disc icons have the blue "x" symbol and won't run. BUT the apple hardware test icon doesn't have a blue "x" and runs. Extended test says all hardware OK.
Finally, startup in single user mode with "apple-s" depressed goes to a non-gui white text (UNIX core?) which gives blocks of repetitive text starting "unresolved kernal trap (cpu0)...(lots of date)...latest crash.....backtrace:" My rough guide to the Mac gives me text to enter at that point but I can't input to the screen.
That's where I'm stuck.

You're encountering a kernel panic.
[I got a black screen telling me I had to reboot in many languages, what was it?|http://www.dslreports.com/faq/4970] Also has detailed description of what happens during a KP.
[Apple docs: What's a kernel panic? (Mac OS X)|http://docs.info.apple.com/article.html?artnum=106227]
[Topic : kmosx: Kernel Panics? Don't panic too !|http://discussions.apple.com/thread.jspa?threadID=121923]
[X-Lab: Resolving Kernel Panics|http://www.thexlab.com/faqs/kernelpanics.html]
[Tutorial: Avoiding and eliminating Kernel panics|http://www.macfixit.com/article.php?story=20060911080447777]
[Tutorial: An introduction to reading Mac OS X crash reports|http://www.macfixit.com/article.php?story=20060309075929717]
[12-Step Program to Isolate Freezes and/or Kernel Panics|http://macosg.com/group/viewtopic.php?t=800]
[Texas Mac Man's post on kernel panics|http://discussions.apple.com/thread.jspa?threadID=1723768&tstart=0]
These are often attributed to hardware problems though they can also be due to corruption of software. Since you're also encountering it with your DVD I'd tend more towards the former. Your computer seems to be passing the early stage POST tests for RAM. Apple Hardware Test also seems to be passing but [X-Lab: The Apple Hardware Test|http://www.thexlab.com/faqs/aht.html] document recommends using this in loop mode to test for intermittent problems.
Sometimes the crash logs (all the error messages you are seeing) contain information about the problem, but there's an art to reading those.

Have a MacBook Pro. the computer will not boot up, the screen has black and white stripes and multi color bands as well.

Have a MacBookPro. The computer will not boot up. the screen has black and white bands with multi color bands as well.

Yeah it's dead. Take it to an Apple Genius Bar and have it checked out. Then buy a new one.

Desktop restart shows flickering black/white screen, then black. Could not restart. Anyone else with this issue?

Desktop restart shows flickering black/white screen, then black. Could not restart. Anyone else with this issue?

Have the PRAM battery looked at. It may be all that is needed.

Nokia 6288 says nokia then white screen then black...

nokia 6288 says nokia then white screen then black at least 4 times then switches off its happened twice ive replaced the first one its a day old then the next one did the same thing now im awaiting for a call from the phone company i bought it from
NOKIA N73 MUSIC EDITION

i am having the same trouble i have just brought this phone on the 26 of october and i have had it back at the nakia care centre three times to be looked at and they fix it and within that day i get it back it happens again ....... the care centre upgraded software (dead flash). zone tested ok that all they did and now i have to send it back again i was wondering is there anyway i am able to reboot the phone myself???

Computer won't boot past gray screen

I can't get my computer to boot past gray screen. It keeps showing the apple logo and the spinning wheel. What can I do to get into my system?

Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
Startup - Gray Screen
Startup Issues - Resolve
Startup Issues - Resolve (2)

HT4061 I have an iphone 5s, does not boot, blinking white screen with black logo, when trying itunes restore from mac and pc, error code 4013 which is usb error, any ideas?

I have an iphone 5s, does not boot, blinking white screen with black logo, when trying itunes restore from mac and pc, error code 4013 which is usb error, any ideas? Does a totally dead battery have that effect? I have had it plugged in to a computer overnight, but maybe does not charge when totally dead?
Please help, thanks in advance all1

Hi eggroll77,
Welcome to Apple Support Communities.
That alert codes does suggest there is a USB related issue. If you haven’t already, try the troubleshooting suggestions in the article linked below.
iOS: Restore errors 4005, 4013, and 4014
I hope this helps.
-Jason

MBP 10.9.5-Gray screen (post log-in) but can log into guest acc no problem

Background: MBP has been fine until today, when it got really slow. I figure I have too many windows open (specifically Safari tabs); I was also having weird freeze-ups with the VLC player. I restarted the computer after it was getting really weird; I keep it on the setting where previously open programs and files will reload when I log back in)
I've looked around at other posts but I couldn't find one that specifies the gray screen I seem to have. My gray screen pops up after I log in, and the top bar (finder bar?) is visible. My cursor can be moved but goes between its usual shape and the beach ball. The weird thing is that I started up in safe mode (which worked), and then when I tried to restart and log in again, the windows which I didn't close were viewable at the front of the gray screen. They were useless however, since I am unable to actually click anything on the gray screen.
Things I've tried:
Restarting (often becomes force shutdown when I can't get the computer to respond)
Safe Mode (this works, but is really slow)
Disk Repair in Utilities (said everything looked OK)
And finally, I tried logging in on the guest account and everything seems to be fine.
Does anyone have any suggestions for this? Is there a way for me to erase the "save" setting that is remembering what applications I had up.
Thanks for your help!

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

IPad air2 suddenly freezes and the screen goes black, but sound continuesI have restored to factory setting and it was OK for a while yesterday it froze again. Anyone else got this problem

IiPad air2 suddenly freezes, the screen goes black but the sound is still on, I have taken it back to factory settings and it was OK then yesterday it froze again, only plugging it into my IMac got it going again. Anyone else got this problem?

Greetings jupiejupie,
Welcome to the Apple Support Communities!
I understand that your iPad is sporadically becoming unresponsive and the screen is turning black. In this situation, I would recommend reading over and working through the suggested steps in the attached article.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
Cheers,
Joe

Late 2008 MacBook Pro won't boot; only gray screen with Apple, spinning gear, and then the mouse pointer.

Thanks to all in advance! Okay, last night I was trying to encrypt a Time Machine BackUp disk (Seagate 500GB Back Up Plus) and a dialog box popped up and said "POSIX could not..." And then whatever was next. So I unplugged the drive, plugged it back in, and the files still showed up, so I was like "oh okay so it's not screwed up." The next I try and boot my MacBook Pro, and of course it doesn't. The gray screen comes up, the logo shows up, the gear is spinnin, the it goes away and the mouse shows up. But that's where it stops. And sits. And sits. And sits. So I force it to shut down. I run through this many more times, as well as attempting the Recovery Mode, Safe Boot, and to no surprise, it doesn't work. So I go grab my trusty Snow Leopard disc, pop it in, ctrl-C on start up and it loads. So I select the option of restoring from a Time Machine backup and plug in the external drive only to not see it in the list. So I go to Disk Utility, and find out that the entire external drive has been erased and renamed disk8s2. So I go to my internal drive, but it shows how much has been used and it matches to how much as of last night. So I tried repairing the disk and restarting and of course it doesn't work. So now I don't know what to do. Really I'll take any suggestions besides buying anything (I'm only a 16 year old guy haha). So yeah. Thanks!

The encryption never actually followed through.
You started it, though. That makes the volume inaccessible to any OS X version before 10.7.

MBP sudden boot problem, gray screen then black zombie

Similar Messages

Maybe you are looking for