MBP suddenly SLOW wifi connect!! help

All of a sudden the wifi speeds on my MBP are very, very slow. Like 100-300kbps when on the very same home wifi network my iPhone gets 3mbps down.
Is there any thing on my MBP I can check, config settings???
thanks for any help!!

I have this very same issue. I have the MR814v2 from Netgear (fairly old now but still works very well with other machines). I have a Powerbook G4, a Windows XP machine with a Netgear adapter and the new MBP 15.4 all connected to the same router.
The data transfer of both the G4 and the PC are fast but the MBP is frustratingly slow.
I checked the activity monitor and found that Skype had some 23 threads running. I terminated both Skype and Adium. This made maybe slight improvements but not much.
I also turned off the firewall on the MBP but this too makes little difference.
Does anyone have any further suggestions?
Is there a known fault with the MBP Airport?

Similar Messages

Sudden slow wifi connection with Airport Express 802.11n

Recently, all of a sudden I noticed the speed of my internet droped dramaticlly from ~27Mbps to ~4Mbps (Speedtest.com) Comcast's blast. When I connect my laptop directly to the modem there is no problem with the speed. I tried restarting the modem, changing the channel/radio mode on the airport express, hard reset the airport epress, change the location of the airport express but nothing has changed. I notice that the speed fluctuate on speedtest.com meaning it ranges from 1-3 to 5-7Mbps. I test the speed on three other laptops but still got the same result. The only change I can think of that could effect this is the addetion of two computers to the network but I would still get the same speed when they are powered off.
Thanks

willcyrier wrote:
Do I have to change anything on my computers?
you use +airport utility+ (AU) (in your applications > utilities folder). launch AU, double-click on the icon of your extreme to enter manual setup, and go to the wireless tab. see this screen shot
however, before you do, i recommend you download iStumbler (does not work with Snow Leopard) or AirRadar (it has a trial period) and note the channels other networks in your vicinity are broadcasting on. change the channel of your network as far away as possible from those.
good luck !

I was trying to installed new ios update and suddenly my WIFI connection got desconnect. now I am trying to restore my Ipad2 but getting error saying "the Ipad could not restored, An unknown error accured (3194).

I was trying to installed new ios update and suddenly my WIFI connection got desconnect. now I am trying to restore my Ipad2 but getting error saying "the Ipad could not restored, An unknown error accured (3194)". so please help me out to resolve the same.

When I restart my iPad the connect to iTunes comes up and stays on until it shuts down again, I have read a report from Apple support suggesting I reinstall iTunes so I might try that again and also your suggestion which i shall also try, but thanks again - rg1547

5s on 8.0.2 Slow WiFi Connection - worth a try

I've been suffering from slow WiFi connection since I updated from iOS 7 to 8.0.2 and it got worse after updating a game (CoC). Its taking ages to load the game, download any app from app store, or any internet related task. Anyway, my WiFi issue is fixed and just want to share this workaround to help other people who is suffering and very much frustrated out there, like I was.
Go to SETTING - GENERAL - RESET - RESET NETWORK SETTINGS.
WARNING!!!
Doing the above will reset all your network settings including network passwords
Disclaimer
I'm not responsible for any damage/loss it may cause to you or your phone. Do at your own risk

I have all the same problems. I have a 5S. What I have found that if I reset network settings or power off/on - wifi will work for 5-10 mins, then go back to a crawl. BTW I am on IOS 8.1. Same issues
I tried:
-resetting network settings
-hard reset (home and lock button)
-Reset everything
-Restore Iphone (IOS 8.01/8.02/8.1)
-Restored iphone from new
-Turned off wifi networking
-Went to Genius bar and they gave me a new phone, it worked for a few days, then back to this.
It is a software issue. Because every other device works just fine on wifi (iphone 4, ipad, laptop, desktop)
I will be calling apple support again later to see what they will say. It is funny how Apple won't admit to known issues until a fix comes out.

New imac 27(Intel based,bought 2013) slow wifi connection with my Verizon fios actiontec router. All other wireless devices in the house(ipad 3gen,MacBook Air ,hp laptop) have a much faster connection. Should I change router settings to G only,etc

New imac 27(Intel based,bought 2013) slow wifi connection with my Verizon fios actiontec router. All other wireless devices in the house(ipad 3gen,MacBook Air ,hp laptop) have a much faster connection. Should I change router settings to G only,switch channel from auto to maybe 6,channel width to 20mhz? Already changed security settings to WPA2. Currently router is running in mixed b and g mode.

If you have one computer running on G they will all run on G. All ROUTERS are backward compatible, in otherwords if you have a group of computers and all of them are N compatible and one or two are G They will all work but the N computers will run at N and those that are G will run at G speed not N.
It can get confusing but really it is simple. The newest is 802.11 AC and ic used with the newest Mac Computers made available in November 2013. So if you have the newest Airport Extreme that is 802.11ac and the newest computers that are AC compliant your speed will be 5 times faster than anything on the market right now.

Any news on ios 8.0.3 update? Been waiting for it coz of my slow wifi connection after i updated my iphone 5s to ios 8.

Any news on ios 8.0.3 update? Been waiting for it coz of my slow wifi connection after i updated my iphone 5s to ios 8.

I have heard rumours of an 8.1 update for developers. I just found another bug in 10.9.5. I am beginning to think that nobody should touch any update from Apple until they can get their very serious Q/A problems sorted out. This is getting bad.

Very slow wifi connection on my MBP

I'm having problems with my wifi connection on my MBP. My iPad, iPhone and iPod all work absolutely fine but for some reason I have a very slow connection on the MBP. If I connect it to the router with a wire it's fine so it's definitely the wifi.
The only other thing that's changed recently is our Internet package. But this hasn't effected any of my other devices and we actually upgraded our package so I think that's coincidental.
Is it a known problem with MBPs? Should I take it to the genius bar or is there a simple solution.
Thanks in advance

thanks for the tip. unfortunately, removing the security from the router isn't an option as it isn't even my router (my roommate owns it and would never allow that to happen).
the thing that is perplexing is that it hasn't always been slow - this just started happening within the last two weeks. one could assume that if one computer experiences a slow internet connection, the other would as well if they are both going through the same router. secondly, the connection strength, despite it being slow, is at the maximum. finally, if i connect to any other network at school or coffee shop, the connection is fast. there's obviouly something specific to my MBP and the router that the computer doesn't like, which is causing the lag.
maybe my MBP doesn't like the channel that the router is set to. i'll look into getting it switched as it may be the root of the problem.

!TRIED EVERYTHING! PLEASE HELP! Lenovo thinkpad twist super slow WIFI connect to home router

I love my twist i just wish my wifi would work at home!
It connects and works fine at public places
At home it takes forever to connect maybe have to try 5 times taking 5-7minutes and it will disconnect sometimes if computer goes black
I have : lenovo thinkpad twist s230u with windows 8
I have a : Broadcom 802.11n Network Adapter
I have a : Broadcom driver 6.30.59.26
Troubleshooting that i have already tried: adjusting wifi power settings, downloading lenovo driver
PLEASE HELP

I would try plugging the laptop directly into your cable modem, thus by-passing the router, and check your connection speed. Next, connect the router to the cable modem and plug the laptop directly into the router by cable. Compare your connection speeds. If both work fine by cable, then I think your wifi on the home router isn't broadcasting/working. You say the wifi connects at work/public, which leads me to believe it is not your laptop wifi card. What is your wifi signal strength from your home network? work? public?

AirPort Time Capsule (firmware v7.7.3) has slow wifi connection to new Surface Pro 3

I got a new Surface Pro 3 i7. I have all the updates for it. I ran into a problem that many others also ran into which was very slow WiFi performance. I utilized many troubleshooting methods and sources and I am currently inclined to believe this... the new Marvell AVASTAR Wireless-AC Network Controller drivers are not compatible with my Airport Time Capsule firmware version 7.7.3.
Has anyone else experienced this?
Is there another firmware version that works (older or newer)?
Details:
I tried all kinds of things, like changing the network drivers on the SP3 to many different versions. Many of the help forums recommended using the drivers dated 4/24/2014. This did seem to help, but not reliably. What I discovered is... if I connect using the SP3 WiFi to my network extension Airport Express on version 7.6.4, I reliably get 20-22 mbps (which is the best I can expect from my network and works great for my needs). But, when I connect to my primary network Airport Time Capsule, the best I can get is 1.5 mbps, but usually between .15 and .9 mbps. It's completely unusable in today's internet environment. At the same time, I used my iPhone and the Airport Utility to verify the connections. I used SpeedTest.net on my MacBook, iPad, iPhone and Win8.1 HP laptop to verify that every other device was getting the 20+mbps. And they did. Only the Surface Pro 3 couldn't perform when using WiFi through the Airport Time Capsule. The SP3 does achieve 20+ mbps like all my other devices, but only when connected to the Airport Express.
The articles I read said that the network drivers on the SP3 seem to require the routers to be updated to the latest versions. Both the Airport Time Capsule and the Airport Express seem to be updated. When I go into their settings using the Airport Utility, there are no updates available.
Of course this problem isn't replicated at the Microsoft store since they don't have apple routers. So, their response is to upgrade the routers. Extremely unhelpful when the Apple software is saying it is upgraded already. I can't believe this new Airport Time Capsule has to be retired because it isn't playing well with others, and I love the automatic backup it is providing for my MacBook. So, somehow, I need the Airport Time Capsule to work with the new WiFi card & drivers on my SP3, just like the SP3 is working properly with the Airport Express.

Thanks for your input!
1. No downgrade. Bummer, but understandable.
2. Completely agree!!! I did too and then I had to redo it because I couldn't install a driver. I had to start all over and reinstall Win 8 then Win 8.1 over it. It was a colossal waste of time and endless frustration. If I can just get it modestly working, I'll take it. It doesn't have to be perfect right now.
3. Great suggestion! And the Microsoft forums are also a buzz. One suggestion I tried (and it seems to be working) is to set a separate wireless network name for the 5ghz band. I haven't thoroughly tested it yet, but I'm hopeful. I t seems to have worked for some, but not others. The next thing I'll try is fixing the channel, but strangely, I didn't see that option in the AirPort Utility app on my iPhone. Is it only available through Mac/PC laptop/desktop software?
4. Yup. Sigh. I actually have an old linksys. I retired it when I went 100% apple. I was hoping that things would work smoother. And they did! Until this SP3 came into my life. Arg.
And and a few more details...
the AirPort Time Capsule is 802.11ac
the AirPort Express is 802.11n (2nd gen)
I'm wondering if it is the AC connection that is the issue. Maybe since the Express always connects with n, it is OK....
Nope. Just tested the SP3 again and it is maintaining it's connection to the AirPort Time Capsule utiling the 802.11a/n/ac mode and connecting to the 5Ghz special network name. So far so good... Fingers crossed...

Idea centre B520 slow WiFi connection.

I recently bought a leno b520 all in one and I found out that WiFi connectivity is slow on that PC.
I tried with Opera, IE, Chrome and Firefox and the problem still exists. I even reinstalled the drivers and nothing has improved.
However, my Sony laptop performs just fine when I use it on the same network. Is anyone else experiencing this problem and if so when will a fix come out?

Hi Guys and Support...
I have bought a new lenevo B520 some months back. (in JULY 2012). The ALL In One PC is a great machine.. But suddenly the WIFI has become dead Slow... I have FULL Signals.8 MB Speed. All Other machines are good. But the Lenovo B520 i dead slow.. I did several speed test and the result is very poor.. the ping is some times.. 15---100 ms.. and the Downlaod speed comes @ 1 mb or less..
remember that I have no viruses.. or spyware. Did a; cleaning stuff.. !!
Please HELP>>>

HT5622 my apple id isn't connecting and i have wifi connected help

Help with ipad wifi is connected but cannot connect on email safari or to itunes store

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

MBP suddenly slow/lagging - pls somebody skilled with EtreCheck tell me what's wrong?

I love ASC for hands-on advice to try oneself however this time I am in it too deep: My sons MBP suddenly became lagging and unresponsive/very very slow... ie. the swirl-thing comes up 1-2 secs AFTER clicking the apple-icon and the menu yet another 6-10 secs. Below is a copy from EtreCheck, pls help me understand it - never used it before.. My other MBPs could be optimized as well but at least they perform ok... this one is bad. Who to blame? Me, my son or thirdparty?
EtreCheck version: 1.9.15 (52)
Report generated 2 October 2014 17:55:18 CEST
Hardware Information: ?
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information: ?
Intel HD Graphics 4000 - VRAM: (null)
Color LCD 1280 x 800
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 0:22:25
Disk Information: ?
APPLE HDD TOSHIBA MK5065GSXF disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
MacBook Pro HD (disk0s2) / [Startup]: 499.25 GB (348.18 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R   UJ-8A8
USB Information: ?
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Mac App Store and identified developers
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
Launch Agents: ?
[loaded] com.oracle.java.Java-Updater.plist Support
User Launch Agents: ?
[loaded] com.facebook.videochat.[redacted].plist Support
[loaded] com.google.keystone.agent.plist Support
[running] com.spotify.webhelper.plist Support
User Login Items: ?
iTunesHelper
Internet Plug-ins: ?
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
SharePointBrowserPlugin: Version: 14.4.1 - SDK 10.6 Support
Unity Web Player: Version: UnityPlayer version 4.3.5f1 - SDK 10.6 Support
DirectorShockwave: Version: 12.0.3r133 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 7 Update 67 Check version
Safari Extensions: ?
AdBlock
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins ?
Google Earth Web Plug-in: Version: 7.1 Support
3rd Party Preference Panes: ?
Flash Player Support
Java Support
Time Machine: ?
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
MacBook Pro HD: Disk size: 464.96 GB Disk used: 140.69 GB
Destinations:
TCHUB-disc [Network] (Last used)
Total size: 929.19 GB
Total number of backups: 2
Oldest backup: 2014-04-21 13:23:17 +0000
Last backup: 2014-04-22 14:05:48 +0000
Size of backup disk: Adequate
Backup size 929.19 GB > (Disk used 140.69 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU: ?
      3% WindowServer
      1% Dock
      0% com.apple.IconServicesAgent
      0% NotificationCenter
      0% fontd
Top Processes by Memory: ?
82 MB com.apple.IconServicesAgent
70 MB opendirectoryd
53 MB mds_stores
53 MB loginwindow
53 MB ocspd
Virtual Memory Information: ?
1.65 GB Free RAM
1.20 GB Active RAM
612 MB Inactive RAM
568 MB Wired RAM
691 MB Page-ins
0 B Page-outs

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" '/S*/*/Ca*/*xpc* >&- ||echo No' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors XPC\ cache );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 50 32 52;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

RV220W: Very slow wifi connection???!!!

I'm an IT professional with more than 10 years experience. I have spent last 5 days trying to figure out why the wifi connection to this router is so slow, but still no luck. I'm getting only 13Mbps even if my laptop is next to the router! (wired connection worked ok)
I have tried all sort of setting combinations, 2.4GHz/5GHz; N only/ G,N Mixed; Auto/20MHz bandwidth; different channels; WPA2 encrypted vs open; disable firewall; wmm enabled/disabled; 1.0.0.26/1.0.1.0 firmware... no matter what I try, I always get only 10 - 15Mbps speed.
Once I replace this router with my old router, it worked perfectly --- getting 70 - 80Mbps with exactly the same testing environment and configuration.
I really expect this router to offer much faster wireless speed according to this review:
http://www.smallnetbuilder.com/wireless/wireless-reviews/31427-new-to-the-charts-cisco-rv-220w-wireless-n-vpn-firewall
Could anyone help me out? This is driving me crazy!
Much appreciated!
Kelvin

I hope my contacts dont mind me posting this.
Latest Firmware- 1.0.2.4 (was 1.0.2.3)
Please check out the attachment and download for latest firmware.
Bugs Fixed:
22032             Guest user is able to execute print secure settings link and email system summary link
22206             Configuration file name field in Advanced DHCP Configuration page is not having limit for maximum characters
23100             If SLA ID is set to "0", router is not forwarding IPv6 packets to "sit0" interface.
23245             Device not accepting ASCII Characters After F (G to Z) in WEP Key.
24313             Critical error observed when trying to delete the default vlan and clicking on save button for the second time
24565             PPTP server is not running in the backend, for specific of ip addresses.
24651             Unable to activate the protectlink license
24843              Request to have RA managed flag Enabled by default
24890             When PPTP Server is enabled, WAN-> LAN traffic running over Inbound firewall rules is source natted to RV220W lan ip
24975             Use the attached photo for the Setup Wizard of RV220W
25096             Need to include delete and display options in ssl certificates page
have you contacted Cisco with your list of issues?

Slow wifi connection - going crazy trying to figure it out. Sadface.

Howdy,
I read through the forum and tried to find a solution to this problem but everyone seems to be experiencing differences in what is wrong with their problem and I have yet to find a solution to mind.
Problem:
Recently I've noticed my wifi connection has been slow. Slow as in Firefox will sit at "Looking up..." or "Transferring data from..." and just sit there for a few minutes then idle out, stop loading the page or give me an error stating that the server is too busy, or cannot be found. A manual refresh will either restart the process or go immediately to the site. To describe the slowness in another way as if someone is downloading something on the network that causes it to lag. I verified that my computer is not the problem (all downloads offline).
I've made no changes (except for one, stated below) to my network preferences, my router or anything. I haven't recently installed anything on here that would interfere with my network settings either.
Failed solutions:
- Resetting/Restarting my computer, the router and the cable modem.
- Turning Airport on and off, even switching to a different wireless signal in the house (We have DSL and Cable, don't ask) and I get the same results from both connections.
- OpenDNS. It solved one problem temporarily (one server seemed to be offline when in reality it was not, OpenDNS let me go there again but the speed issue remains.)
- Software Update -- Everything is updated.
Also note that my signal strength is full all the time. It will occasionally dip down but that's nothing as the router is in a room beside mine.
My Linksys Wireless G with Speedboost router is secured with WPA and the Mac filtering enabled to only allow this laptop, my iPod Touch and my Nintendo DS access. Could this security be compromised and someone jacking my signal?
I'm at wit's end here. I've usually been able to find my solutions for these problems on a wired Windows computer but this Wifi stuff on my Mac is driving me bonkers. To me everything seems to be green but I know somewhere there is a problem.
If I did miss an important thread, please point me in the direction of it and I'll remove this topic.
Here's hoping this thing will post without timing out.
EDIT Further searching shows me this is a common problem. I guess that's a good thing.
Message was edited by: psychoboyjack

Your Mac stores previous DNS Lookups, Ned's suggestion just empties that cache.
I'm wondering if this could be MTU (Maximum Transmission Unit) related (i.e. packet size) some ISP's can be quite picky about this ...
Apple have an article on setting it for 10.2 (but not for 10.4) here:
http://docs.info.apple.com/article.html?artnum=107474
CockTail also allows you to set this.

Slow Wifi connections?

Hey all,
Anyone noticed that connecting to Wifi with the Touch is a lot slower than with a laptop? And I don't mean a little slower.. it is often to the point where just loading facebook or gmail can take well over 5 minutes. Sometimes I just sit and let it load, go do something else, come back and it still isn't done.
Anyone else experience this?

Hi nategodd-
Does this happen with any wifi connection or one in particular? How is the signal? Are you doing anything else with the Touch while surfing?
Luck-
-DaddyPaycheck

MBP suddenly SLOW wifi connect!! help

Similar Messages

Maybe you are looking for