Mbp takes long time to go to sleep

hey guys.
i am having this issue since a few days and i came to no solution. there is no printers issue, as many others can have.
here is what my terminal says after typing
pmset -g log
Time stamp Domain Message Duration Delay
========== ====== ======= ======== =====
UUID: 6495FF51-6D3E-4789-A87F-C9048360569E
05/10/13 23:18:00 CEST Sleep Software Sleep Sleep: Using AC (Charge:33%) 25 secs
05/10/13 23:18:00 CEST Assertions PID 59(apsd) Released ApplePushServiceTask "com.apple.apsd-waitingformessages-push.apple.com" 00:04:03 id:0xc0000024d Aggregate:0x1040
05/10/13 23:18:00 CEST WakeRequests Clients requested wake events: None
05/10/13 23:18:25 CEST Wake Wake due to EHC1/HID Activity: Using AC (Charge:33%)
05/10/13 23:19:23 CEST Assertions Summary- Aggregate:0x40 Using Batt
how can i fix it?
and here is the previous sleep request; it seems the issue is different from the one before:
UUID: 39470AC2-05AF-4FE7-89FF-8A5AD6299482
05/10/13 19:21:01 CEST Sleep Software Sleep Sleep: Using BATT (Charge:7%) 12294 secs
05/10/13 19:21:01 CEST Timedout Kernel: Response from Google Chrome He timed out 30000 ms
05/10/13 19:21:01 CEST Timedout Kernel: Response from Google Chrome He timed out 30000 ms
05/10/13 19:21:01 CEST Timedout Kernel: Response from Google Chrome He timed out 30000 ms
05/10/13 19:21:01 CEST Timedout Kernel: Response from Google Chrome He timed out 30000 ms
05/10/13 19:21:01 CEST Timedout Kernel: Response from Google Chrome He timed out 30000 ms
05/10/13 19:21:01 CEST Timedout Kernel: Response from Google Chrome He timed out 30000 ms
05/10/13 19:21:01 CEST Timedout Kernel: Response from Google Chrome He timed out 30000 ms
05/10/13 19:21:01 CEST Timedout Kernel: Response from Google Chrome He timed out 30000 ms
05/10/13 19:21:01 CEST Timedout Kernel: Response from Google Chrome He timed out 30000 ms
05/10/13 19:21:01 CEST Timedout Kernel: Response from Google Chrome He timed out 30000 ms
05/10/13 19:21:01 CEST Timedout Kernel: Response from Google Chrome He timed out 30000 ms
05/10/13 19:21:01 CEST Timedout Kernel: Response from Google Chrome He timed out 30000 ms
05/10/13 19:21:01 CEST Timedout Kernel: Response from Google Chrome He timed out 30000 ms
05/10/13 19:21:01 CEST WakeRequests Clients requested wake events: None
05/10/13 22:45:52 CEST Assertions Summary- Aggregate:0x1040 Using AC
so maybe the issues are more than one.
important: i tried to do a safe boot and my laptop DID go to sleep right away. then re boot normally, and the issue came back. help!!!

again me, i cannot find the way to contact google about this. the only way to speak with one of them is asking for google drive support, but they wont answer you because this is a chrome issue. and chrome has no phone or email support. any suggestion?

Similar Messages

Macbook Pro takes long time to wake from sleep

Hi, I have recently purchased the latest Macbook Pro (Mid-2012, not the Retina display version), and I've noticed if the Macbook is left switched on, with the lid down and not plugged into the mains, it will take a long time to wake from sleep. I've looked for similar posts, and everyone describes it as a long delay, but for me the screen is greyed out (but transparent) and a process bar appears, which fills up and then the display loads properly, but it takes a further 30-50 seconds to activate things like the mouse and wifi etc (it feels like it has completely frozen).
Has anyone experienced this and is it normal? I looked up standby mode, but am led to believe this is only with the retina display models, so am a bit worried.

Hi Thumbnut,
This article may help explain what is going on:
Mac computers: Progress bar appears after waking from sleep
http://support.apple.com/kb/HT1757
I hope this helps!
- Ari

MBP takes long time to shut down

Hi,
Recently my 13" Mid 2012 MacBook Pro has been taking around 30-40 seconds to shut down whereas it only took 3 seconds before. The system itself is as responsive as ever and the OS and hardware seem to be working well, but the hard drive seems to be taking a long time to stop. Please help. This is very worrying.

1. Startup in Safe Mode.   http://support.apple.com/kb/PH14204
2. Reset PRAM. http://support.apple.com/kb/PH4405
3. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

MBP takes long time to restore wired network connection after wake-up

Hello...
My Mid-2010 MBP (MacBookPro6,2) has been experiencing this problem recently -- Whenever I wake up the computer from sleep, it needs approximately 10 seconds to restore its wired network connection. I know there are other annoying connection issues with MBP's WiFi/AirPort out there, but I'm talking about the wired connection here.
Maybe some don't even think this slowness is a problem at all, but this laptop used to be network-ready right after wake-up until 3~4 months ago. That was around the time when I upgraded to SSD and changed some settings via pmset, not sure if that's the culprit. It is now running OS X 10.8.5 and its pmset settings are:
Battery Power:
lidwake              1
ttyskeepawake        1
hibernatemode        3
gpuswitch            2
hibernatefile        /var/vm/sleepimage
displaysleep         2
sleep                15
acwake               0
halfdim              1
sms                  0
lessbright           1
disksleep            10
AC Power:
lidwake              1
ttyskeepawake        1
hibernatemode        0
gpuswitch            2
hibernatefile        /var/vm/sleepimage
womp                 1
displaysleep         10
networkoversleep     0
sleep                60
acwake               0
halfdim              1
sms                  0
disksleep            0
I'd appreciate help of any kind
Thanks,
zuoy

Maybe try this, i am not sure that it will resolve the problem, but it is worth trying anyways.
http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/thread/eef49e64-157c-4082-8e80-52e48309691f
Hi All,
I've seen this problem multiple times, especially with Windows 7 64-bit versions and Enterprise edition. The source of the problem appears to be the Bonjour service that is installed in the background and set to "Automatic" when installing certain 3rd
party applications. Apple applications like iTunes and Adobe applications like Acrobat Professional and Creative Suites have been known to cause this problem. I've also seen virtualization software like VMWare and VirtualBox cause similar issues
with network adapters.
The solution in most of the cases I've come across has been to stop and disable the Bonjour service. The Bonjour service also masquerades as a service with a name of the format "##Id_String1.6844F930_blahblahblah". Here's how to disable this service
in Windows 7:
Right-Click on Computer > Select 'Manage'
Expand the 'Services and Applications' section in the bottom of the Left-Nav dialog and Select 'Services'
Sort the Services list by name and look for either "Bonjour" or the "##Id_String..." name mentioned above
Right-Click on the service and select 'Properties'
Click the 'Stop' button to stop the service
Select 'Disabled' from the 'Startup type' drop down list
Click 'Apply' and then 'OK'
Reboot your machine and see if the "Multiple Networks" issue is resolved. If so, you should have internet connectivity again.
Hope this helps.
cheers,
Aaron

MBP takes long time to start up and applications freeze up

This has been a problem for a while now and I tried deleting the harddrive and reinstalling all of my software but it didn't work. Safari can work for a while but regularly freezes up so I have to force quit and reopen. Some applications like Pages don't even open most of the time and the icon just continues to bounce endlessly. I upgraded the software recently but it's still a problem. Does anyone know what the issue might be?
Thanks in advance.

You could try skype...

My mac shutdown suddenly fr0m time to other and take long time to open

hi everybody,
I think i have big problem ,i have macbookpro I5 13" early 2011 , i just changed the board to I7 ( used board got it from net ) after USB ports in my original logicboard are damaged due to drop , after changing the board the mac is unstable, it take long time(half hour!) to show up anything after press power, yes I press power and there are no response from the mac (black monitor as its ) , just i hear a noise from the empty CD drive . once it open it work fine for a while (may 2 hours or more ) and then shutdown suddenly! and you have wait more than half hour to open it again if im lucky.
Itried to rest the mac many times, replace the RAM places , i thought may the problem come from overheating the CPU, i monitored the CPU tempreture just before the suddenly shutdown was 57C
please help ,any suggetions ?

Run an Apple hardware Test:
support.apple.com/kb/ht1509http://
You may have to use OPTION D to start it.
See what that picks up.
You may also bring the MBP to an Apple store or AASP for a diagnostic evaluation.
Ciao.

BPM Process chain takes long time to process

We have BI7, Netweaver 2004s on Oracle and SUN Solaris
There is a process chain (BPM) which pulls data from the CRM system into BW. The scheduled time to run this chain is 0034 hrs. This chain should ideally complete before / around 0830 Hrs. <b>Now the problem is that every alternate day this chain behaves normally and gets completed well before 0830 hrs but every alternate day this chain fails</b> there are almost 40 chains running daily. Some are event triggered (dependent with each other) or some run in parallel. In this, (BPM) process chain, usually there are 5 requests with 3 Delta and 2 full uploads (Master Data). The delta uploads finishes in 30 minutes without any issues with very few record transfers. The first full upload is from 0034 hrs to approximately 0130 hrs and the 2nd upload is from 0130 hrs to 0230 hrs. Now if the 1st upload gets delayed then the people who are initiating these chains, stop the 2nd full upload and continue it after all the process chains are completed. Now this entire BPM process chain sometimes takes 17 -18 hrs to complete!!!!!
No other loads in CRM or BW when these process chains are running
CRM has background jobs to push IDOCS to BW which run every 2 minutes which runs successfully
Yesterday this chain got completed successfully (well within stipulated time) with over 33,00,000 records transferred but sometimes it has failed to transfer even 12,00,000 records!!
Attaching a zip file, please refer the 21 to 26 Analysis screen shot.doc from the zip file
Within the zip file, attaching Normal timings of daily process chains.xls the name explains it.
Also within the zip file refer BPM Infoprovider and data source screen shot.doc please refer this file as the infopackage (page 2) which was used in the process chain is not displayed later on in page number 6 BUT CHAIN GOT SUCESSFULLY COMPLETED
We have analyzed:--
1)     The PSA data for BPM process chain for past few days
2)     The info providers for BPM process chain for past few days
3)     The ODS entries for BPM process chain for past few days
4)     The point of failure of BPM process chain for past few days
5)     The overall performance of all the process chains for past few days
6)     The number of requests in BW for this process chain
7)     The load on CRM system for past few days when this process chain ran on BW system
As per our analysis, there are couple of things which can be fixed in the BW system:--
1)     The partner agreement (transaction WE20) defined for the partner LS/BP3CLNT475 mentions both message types RSSEND and RSINFO: -- collect IDOCs and pack size = 1 Since the pack size = 1 will generate 1 TRFC call per IDOC, it should be changed to 10 so that less number of TRFCs will be generated thus less overhead for the BW server resulting in the increase in performance
2)     In the definition of destination for the concerned RFC in BW (SM59), the Technical Setting tab says the Load balancing option = No. We are planning to make it Yes
But we believe that though these changes will bring some increase in performance, this is not the root cause of the abnormal behavior of this chain as this chain runs successfully on every alternate day with approximately the same amount of load in it.
I was not able to attach the many screen shots or the info which I had gathered during my analysis. Please advice how do I attach these files
Best Regards,

Hi,
Normally index creation or deletion can take long time in case your database statistics are not updated properly, so can check stat after your data loading is completed and index generation is done, Do creation of database statistics.
Then try to recheck ...
Regards,
Satya

The Application Takes long time to Start

Hello All,
We ar eon Unix->64 Bit-> Essbase 11.1.1.3.
Problem Description : The application is taking long to start up. around 5 to 6 minutes. This is very first time it is happening.
There were no specific changes done to the application in the recent releases.
I have tried all options 1. Compacating outline, 2. Purging the application log etc. all other applications respond good on this host except this. Usually any application should not take more than 1 to 2 minutes to start up.
There are no specific errors or XCP files recorded in the logs and folders.
Appreciate your suggestions
MS

Thanks Jitendra and Prabhas,
I know i have posted this thread sometime back and later I had to jump on a New release, so did not get time to check your inputs.
Well I am back on this issue again. I have been working on various option to get this issues solved " start of App takes long time"
Here are some Details. We are on SunOs 64 Bit, has 12CU with dual core, with Essbase 11.1.1.3 running on it. This is an ASO application and has just 7 dimensions, Out of which the ORGANIZATION Dimension is pretty huge with Multiple Hierarchies enabled ( Both Stored and Dynamic ) and has more than 20,00,000 members including the alternate hierarchies ( Shared members)
I did a smoke test by building dimension by dimension the app was startiung up in just *40* seconds. and when i reached the ORG dimension and added more than 70,000 memebrs . there i fall sick. the app now gets back to its old issue ( Takes more than 10 mainutes to start).
CPU Usage ranges between 3.1 % to 4 %
PID USER NLWP PRI NI VSZ RSS S STIME ELAPSED %CPU COMMAND
4424 user1 1 59 20 1608 1032 S 18:13:33 00:00 0.0 grep COMMAND
4428 user1 1 59 20 1608 1032 S 18:13:33 00:00 0.0 grep ESS
4766 user1 88 55 20 6814168 5684200 O 17:37:48 35:45 3.1 /path/xyz/masked/ASO_APP hgfedc NOCREAT.
But My question here is, in the last moth cube i still similar number of members in the cube and nothing really had changed.
Essbase GURU's Please give me some Hint to think out of box now.
Thanks
MS

Report takes long time for few records

hi frends,
I m facing one problem with my Web based erp application which is developed in .net , in my application when i open the report from my applicaiton , in my temp folder there one file gets created name is "rpt conmgr cache"
bcoz of this for few records also my report takes too much time and opens very slow and it takes long time, and it happens in some of the reports only , other reports are working cool and its not creating any file in temp folder,,, so can u guide me whats this file and what can be the solution for it,
Thanks
Mithun

hi sabhajit,
i have already checked the sql query it is taking less then seconds.
any other steps u want me to check then pls let me know?
thanks mithun

Photo both takes long time to open, what can i do?

photo both takes long time to open, what can i do?

SO do you think we can get a aunser? i just bout my imac u know!!

MVIEW refresh takes long time

Materialized view takes long time to refresh but when i tried select & insert into table it's very fast.
i executed SQL and it takes ust 1min ( total rows is 447 )
but while i refresh the MVIEW it takes 1.5 hrs ( total rows is 447 )
MVIEW configration :-
CREATE MATERIALIZED VIEW EVAL.EVALSEARCH_PRV_LWC
TABLESPACE EVAL_T_S_01
NOCACHE
NOLOGGING
NOCOMPRESS
NOPARALLEL
BUILD DEFERRED
REFRESH FORCE ON DEMAND
WITH PRIMARY KEY
Not sure why so much diffrence

infant_raj wrote:
Materialized view takes long time to refresh but when i tried select & insert into table it's very fast.
i executed SQL and it takes ust 1min ( total rows is 447 )
but while i refresh the MVIEW it takes 1.5 hrs ( total rows is 447 )A SELECT does a consistent read.
A MV refresh does that and also writes database data.
These are not the same thing and cannot be directly compared.
So instead of pointing at the SELECT execution time and asking why the MV refresh is not as fast, look instead WHAT the refresh is doing and HOW it is doing that.
Is the execution plan sane? What events are the top ones for the MV refresh? What are the wait states that contributes most to the processing time of the refresh?
You cannot use the SELECT statement's execution time as a direct comparison metric. The work done by the refresh is more than the work done by the SELECT. You need to determine exactly what work is done by the refresh and whether that work is done in a reasonable time, and how other sessions are impacting the refresh (it could very well be blocked by another session).

Takes Long time for Data Loading.

Hi All,
Good Morning.. I am new to SDN.
Currently i am using the datasource 0CRM_SRV_PROCESS_H and it contains 225 fields. Currently i am using around 40 fields in my report.
Can i hide the remaining fields in the datasource level itself (TCODE : RSA6)
Currently data loading takes more time to load the data from PSA to ODS (ODS 1).
And also right now i am pulling some data from another ODS(ODS 2)(LookUP). It takes long time to update the data in Active data table of the ODS.
Can you please suggest how to improve the performance of dataloading on this Case.
Thanks & Regards,
Siva.

Hi....
Yes...u can hide..........just Check the hide box for those fields.......R u in BI 7.0 or BW...........whatever ........is the no of records is huge?
If so u can split the records and execute............I mean use the same IP...........just execute it with different selections.........
Check in ST04............is there are any locks or lockwaits..........if so...........Go to SM37 >> Check whether any Long running job is there or not.........then check whether that job is progressing or not............double click on the Job >> From the Job details copy the PID..............go to ST04 .....expand the node............and check whether u r able to find that PID there or not.........
Also check System log in SM21............and shortdumps in ST04........
Now to improve performance...........u can try to increase the virtual memory or servers.........if possiblr........it will increase the number of work process..........since if many jobs run at a time .then there will be no free Work prrocesses to proceed........
Regards,
Debjani......

The 0co_om_opa_6 ip in the process chains takes long time to run

Hi experts,
The 0co_om_opa_6 ip in the process chains takes long time to run around 5 hours in production
I have checked the note 382329,
-> where the indexes 1 and 4 are active
-> index 4 was not "Index does not exist in database system ORACLE"- i have assgined to " Indexes on all database systems and ran the delta load in development system, but guess there are not much data in dev it took 2-1/2 hrs to run as it was taking earlier. so didnt find much differnce in performance.
As per the note Note 549552 - CO line item extractors: performance, i have checked in the table BWOM_SETTINGS these are the settings that are there in the ECC system.
-> OLTPSOURCE - is blank
   PARAM_NAME - OBJSELSIZE
   PARAM_VALUE- is blank
-> OLTPSOURCE - is blank
   PARAM_NAME - NOTSSELECT
   PARAM_VALUE- is blank
-> OLTPSOURCE- 0CO_OM_OPA_6
   PARAM_NAME - NOBLOCKING
   PARAM_VALUE- is blank.
Could you please check if any other settings needs to be done .
Also for the IP there is selction criteris for FISCALYEAR/PERIOD from 2004-2099, also an inti is done for the same period as a result it becoming difficult for me to load for a single year.
Please suggest.

The problem was the index 4 was not active in the database level..it was recommended by the SAP team to activate it in se14..however while doing so we face few issues se14 is a very sensitive transaction should be handled carefully ... it should be activate not created.
The OBJSELSIZE in the table BWOM_SETTINGS has to be Marked 'X' to improve the quality as well as the indexe 4 should be activate at the abap level i.e in the table COEP -> INDEXES-> INDEX 4 -> Select the u201Cindex on all database systemu201D in place of u201CNo database indexu201D, once it is activated in the table abap level you can activate the same indexes in the database level.
Be very carefull while you execute it in se14 best is to use db02 to do the same , basis tend to make less mistake there.
Thanks Hope this helps ..

Delete Index in Process Chain Takes long time after SAP BI 7.0 SP 27

After upgrading to SAP BI 7.0 SP 27 Delete index Process & Create index process in Process chain takes long time.
For example : Delete index for 0SD_C03 takes around 55 minutes.
Before SP upgrade it takes around 2 minutes to delete index from 0SD_C03.
Regards
Madhu P Menon

Hi,
Normally index creation or deletion can take long time in case your database statistics are not updated properly, so can check stat after your data loading is completed and index generation is done, Do creation of database statistics.
Then try to recheck ...
Regards,
Satya

Database Connectivity takes long time if one of the Node is down .. ??

Hello All,
Env: 10.2.0.4 on Solaris 10
I have 2 nodes.
When Node1 server is down, it takes long time to connec to the database.
tnsping would give "OK(2050ms)". Below is the tnsalias.
RAC_test =
(DESCRIPTION =
     (ADDRESS = (PROTOCOL = TCP)(HOST=20.268.169.123)(PORT= 1521))
     (ADDRESS = (PROTOCOL = TCP)(HOST=20.268.169.127)(PORT= 1521))
     (LOAD_BALANCE = yes)
          (CONNECT_DATA =
        (SERVICE_NAME = DK.com)
      (FAILOVER_MODE =
        (TYPE = SELECT)
        (METHOD = BASIC)
        (RETRIES = 180)
        (DELAY = 5)
)I put the trace on sqlnet.ora and found that first it pings to the "20.268.169.123",
since the Server is down there will not be any reply and this consumes the delay and
later it would ping "20.268.169.127" and connect to it.
If i keep "20.268.169.127" above "20.268.169.123" in tnsalias, and keep "LOAD_BALANCE=no",
it gets connected very fast, as its directly connecting to Node2. In tnsping i get Ok(40ms).
How do i reduce the connect timing if i use the first step. Why does it take long time for
Oracle Client to understand that the Node1 Server is down ?
TIA,
J J

I hope the IP's you are using in the TNS are Virtual IP's.
You must use Virtual IP's / hostnames for the failover to be quick. If Node 1 is not available then then it's (Node 1's) virtual IP would also get assigned to Node 2 hence all client connections are still able to get a response from the Node Virtual IP address without needing to wait for TCP/IP timeouts. This helps clients to get notified immediately that node 1 is unavailable and the connection tries the 2nd ip/host in the connect descriptor.
Hope this helps.
- Siba

Mbp takes long time to go to sleep

Similar Messages

Maybe you are looking for