MBP & Thunderbolt Cinema Display

Hi,
How do I set up my MBP and the Apple LED Cinema Display Thunderbolt?
If my MBP does not support Thunderbolt, can I still connect it to the Cinema Display?
Thanks.
Ed

Yes you can:
The Dock is located at the bottom of the screen by default and the Apple menu bar is located at the top of the screen. You can connect to the external monitor using "Mini-DisplayPort to DVI Adapter" or "Mini-DisplayPort to VGA Adapter". Connect the monitor cable to the Mini-DisplayPort. You can now use the second display to create an extended desktop or mirror primary desktop. To configure multiple monitor click on Settings i.e. "Apple Menu" > "System Preferences" :
Fig.01: Rearrange the position of the dock and menu bar
Choose "Displays":
Fig.02: Drag the white rectangle to move the menu bar to the external display
The display will flickers and may goes black while refreshing the arrangement.

Similar Messages

My LaCie Firewire 800 hard drive, connected to my Macbook Pro via Thunderbolt Cinema Display port, disconnects after sleep

I have a LaCie RAID Quadra hard drive (two disks in a case set to a redundant array) which for all intents and purporses appears as a normal hard drive to my mac.
When connected directly via FW800 to my Macbook Pro (2011, with thunderbolt port), it works perfectly.
For the sake of convenience, and since I am using it only at home as my Time Machine drive, I connected it to the FW800 port on my Thunderbolt Cinema Display. The display works perfectly in every way up until now.
When connected, the drive works great. However, when I put the machine to sleep, upon awakening it, I receive the "Disk improperly ejected" error immediately upon the screen coming up.
The drive is set to Auto mode which has always worked fine in the past; putting the drive to sleep when the computer is asleep, etc.
So, I only receive the disk ejected error when it's plugged into the Cinema Display; not when directly plugged into the MBP.
I have the 1.1 firmware update applied to the monitor.
Any ideas? I appreciate it.

{quote}
My desktop has two FireWire ports. In the first one I had my webcam plugged in. In the second one, the External Hard Drive. I unplugged the camera and used the first port for my External HDrive and now it works! So it seems the problem is a hardware problem with the port.
I'd check to see if the problem returns when you plug the camera back into the second port, or if the drive works in the original port when the camera is not connected.
Edit: Maybe you unplugged the problem, when you unplugged the camera?
Message was edited by: dechamp

Color Different on MBP and Cinema Display

I have a problem I am so far not able to resolve. I have a new 2008 MBP 17" with an Apple Cinema Display hooked up to it. The color on the MBP is nice and seems "right". The color on the Cinema Display is brighter - so much so that is not very good for using an application like Aperture, where a second monitor would be a great asset.
I have tried adjusting the calibration on both screens but can not get the two screens to match up even reasonably well. I now have the calibration set to "Color LCD" on the MBP and "Cinema HD" on the Cinema Display but the Cinema display is till unnaturally bright. Reds are WILD and skin tones are more "orangey" and "pink".
I am not a color calibration expert and am somewhat at a loss here.
Does anyone have any info on a solution to this somewhat annoying problem? Is there a piece of equipment out there that does a good job and is reasonably priced? My concern is that any photos I print do not come out shockingly bright.
Thanks in advance.

Michael Byrnes wrote:
I have a problem I am so far not able to resolve. I have a new 2008 MBP 17" with an Apple Cinema Display hooked up to it. The color on the MBP is nice and seems "right".
Don't let your eyes deceive you. While the MacBook Pro has one of the best laptop displays out there, no laptop display matches even the midrange desktop displays. An objective test will show that the Cinema Display absolutely blows away the MacBook Pro display after proper calibration. Read this article for tests and explanations about the MacBook Pro display in a professional context.
One of the key ideas is that it how "right" the color looks to us is not a reliable way of determining if the colors are actually accurate.
The color on the Cinema Display is brighter - so much so that is not very good for using an application like Aperture, where a second monitor would be a great asset.
One of the things you'll learn as you study color management is that most monitors have a maximum brightness that is far too high for calibrated work. For proper blacks and white, and especially if you hope to simulate paper well, when you run a hardware calibrator on your monitor you will usually be required to reduce brightness to somewhere in the lower quarter of its range.
I have tried adjusting the calibration on both screens but can not get the two screens to match up even reasonably well. I now have the calibration set to "Color LCD" on the MBP and "Cinema HD" on the Cinema Display but the Cinema display is till unnaturally bright. Reds are WILD and skin tones are more "orangey" and "pink".
Due to the very different capabilities of the two monitors, you'll find it difficult to impossible to get them consistent by eye. Partly because human eyes are adaptive and can't be sufficiently subjective. If you are serious about good color, your best bet is to invest in a good hardware calibrator (like the one in the linked article above) and let it calibrate both monitors to a known standard.

No synchronisation between MacBook Pro 15" Retina and Apple LED Thunderbolt Cinema Display 27"

If I start my Retina MacBook with connected Apple 27" Monitor via Thunderbolt, I can notice less a second a blue Screen on both devices and then both Displays become black, since I installed Mountain Lion (10.8.2); the time before (Lion 10.7), the synchronisation was ok and everything is okay with my 13"-Apple AirBook (Lion 10.7) also.
Now, when this happens and I move down the Display of my 15" MacBook Retina, I can see everthing on the 27" monitor. With an extern mouse, I can work quite well (without the MacBook-keyboard, because the Display is closed). I didn't try an extern keyboard till now. I only can move the pointer of the ext. mouse visible on both screens.
When I connect a further monitor via HDMI to my MacBook Retina, everthing is okay and I can watch 3 Displays !!!
When I turn off (the third still HDMI-connected Monitor), I can continue working with 2 Displays - Mac Book and 27"-Apple monitor, everthing is ok.
If I disconnect the 27" Monitor, I can continue on the MacBook without a problem. If I connect the Apple-Monitor via Thunderbolt again, the Problem comes again.
Why I can't find a synchronisation between my 15" MacBook Retina (Mountain Lion 10.8.2) and my Apple 27" Monitor (baught in August 2012)????
Herbert

stevejobsfan0123 wrote:
... Some sites like eBay have a Buyer Protection Plan.
True, but eBay's policies are now totally lopsided in favor of buyers. So much, that there are far more sellers getting scammed these days.
Buyers hold all the cards with eBay.
Here's an ebay search. The lowest completed listing prices are within 10% of Apple's... about what you can get with an educational discount anyway. After listing / final value fees and Paypal fees, at those prices sellers are losing money.
Why? Hmm...

How to connect my old 20in Cinema Display to my thunderbolt new MacBook Pro?

Hi everyone, I just brought a new MacBook Pro to replace a older model(brought earlier 2010), and a new thunderbolt Cinema Display. I have a old 20 inch LCD Cinema Display all the way from 2005 and brought a mini display port for my old MacBook Pro, worked just fine. However with the new Thunderbolt Display, I noticed there's another thunderbolt port behind and was thinking to connect my old Cinema Display as a secondary monitor. I've brought a thunderbolt port from amazon (http://www.amazon.com/dp/B007KB0EGC/ref=pe_175190_21431760_M3T1_ST1_dp_1 ), but my old monitor still shows black. What did I do wrong here? Thanks!

So currently there are two displays and you expect there to be three?
Can you swap the displays just to make sure there is nothing else wrong?
That is confirm:
1) MBP -> Display A works
2) MBP -> Display B works
Then try:
MBP +-> Display A
|
+-> Display B

After ML upgrade, MBP mid 2010 crashes or freezes when connecting/disconnecting apple cinema display, specially when is put to sleep.

After upgrading to ML, when I connect my MBP mid 2010 to my Cinema Display system crashes, if I close the mac to put it to sleep, it freezes, if I pull the power cord and then disconnect the cinema display, it freezes to black.
Bottom line... MBP + ML + Cinema Display = Useless aluminum can.
Any Help??? .... Please????

I have exactly the same problem. I found that unplugging the Cinema display (both from the MB and power) and re-connecting did exactly nothing, but that the MS Windows solution works: Reboot your machine.
Note: the problem comes up when the display sleeps, not the computer.
We are really making progress here with the evolution of OSX! NOT!

Using Cinema Display with FCP X

I just made the switch from an iMac to a MBP. I love the MBP but after editing for 7 hours the screen is just too small. I hooked up a monitor via HDMI, it is Ok but still not the best situation. If I purchase a thunderbolt Cinema Display will that basically be the same as having a Cinema Display back in the day hooked up to my PowerMac? I can just set the MBP aside and edit on the much larger screen?
Best.
Tom

Thanks Tom. Have a Happy New Year. And, thanks for all of the advice this past year.
Cheers.
Tom

3 Monitors with 1 iMac and 2 Cinema Displays conected to Windows Gaming PC Help!

Hi
I want to set up a 3 monitor gaming set up with 1 iMac in the middle and 2 cinema displays either side. This would be a tripple monitor set up.
I am looking to set up a new computer and i want to have 3 monitors. I also want to have an iMac so i want the iMac in the middle and two cinima displays next to each other. i Want to also conect these monitors with a Windows 7 gaming PC.
I want to hook up my very powerfull windows 7 gaming computer wich has 3 SLI GTX 560 EVGA cards. These cards have a display port output.
So i want to run 3 monitors from my gaming machine and i also want to have my iMac use the 3 monitors aswell. I also want to take advantage of the full, maximum resolution. I would get the thunderbolt cinema display monitors.
Gaming comupter has 3 display ports so i need to connect each graphics card to one of the monitors. I then need to conect the two cinema displays to the middle iMac.
I have not bought anything yet i just need to know if i can do this. Need to know stuff like what adapers to buy and what compatabilties.
I need to know if this is posible and how i would do it.
Thanks

Could i use some of these cables?
It says they are thunderbolt conpatable.
http://www.macfixit.com.au/shop/index.php?_a=viewCat&catId=229
http://www.macfixit.com.au/shop/index.php?_a=viewProd&productId=2444

MSN Messenger uses wrong inbuilt webcam for video chat on triple screen set up. It uses a cinema display webcam not the iMac webcam.

For some strange reason if i attach my 2 apple cinema displays to my iMac to make a triple screen set up msn messenger video chat does work but it uses the apple cinema display inbuilt webcam and not the iMac webcam. Its annoying as i have to turn sideways to get into the video call view.
So i have a set up like this: an apple cinema display thunderbolt, then in the middle an iMac new then to the right of the iMac another apple thunderbolt cinema display. WWhen i use MSN messenger to make a video call it uses the inbuilt webcam on the far right apple thunderbolt cinema display and not the inbuilt webcam in the iMac in front of me, its annoying any ideas please.
If i unplug both side cinema displays MSN messenger uses the inbuilt camera on the iMac like normal but when i use extra screens it uses the webcam built into those and not the iMacs webcam.

I would try with another client like skype or something
and if it's only msn messanger which have the problem it may
be more of a question for ms's forum?

Will 2008 macbook pro work with 27" cinema display?

November macbook pro 13"
will this work seamlessly with new cinema diaplay?
also - how come it's not HD but 30" is? thanks.

I am using and enjoying my 27" Cinema Display with my October 2008 MacBook Pro 5,1. The display is breathtaking and its operation with my computer is flawless. I strongly recommend that you consider getting an Apple external keyboard and Magic Trackpad to use with your MBP and Cinema Display.
If you have a MBP 5,1 as your post indicates, it has both a 9400M and a 9600M GT GPU, not a 9200M.

How to connect 2 24" Cinema Displays to a non Thunderbolt MBP

Hi I have a 2010 15" MBP and two 24" Apple Cinema Displays. I recently purchased a Matrox DualHead2Go Digital ME graphics expander thinking I could connect the two displays to it. However, the displays have mini displayport connectors and the Matrox is expecting DVI-D connectors. It seems that Matrox do not have a female mini displayport to male DVI adaptor so I am stuck.
Has anyone found a way of connecting two 24" Apple Cinema Displays to a non Thunderbolt MBP?
Thanks in advance
Neville

Just got the DualHead2Go DP edition. Problem is, I need a MiniDP (female) to DP (male) adapter to connect my two Apple 24" LED displays to it... and I can't find one anywhere? basically the DualHead2go only has DP inputs. All of my devices (24" LED displays and 17" MBP) are MiniDP.
Anyone have any ideas?
Shane

How do I connect a new Thunderbolt MBP to and old 23" HD Cinema Display ADC port

A question Im sure many have asked but I cant find a straight forward answer.
I simply will be buying a new thunderbolt MBP 15 and NEED to connect it an old 23" Apple Cinema Display that uses the old ADC connector.
Can I do it and if so how? I realise theres a potential under powering issue?
Thanks

Hello Sigh
I am sure there is no way to get your ADC connector display to function with your new Mac Book Pro.
I tried everying I could and gave up and purchased a 24" Apple refurbbished Cinema Display for $599 + tax on 4/27/2011. The Apple part number is FBXXXXL/A, Model A1287.
Gave my year 2002 ADC 22" display to a friend.
d
Sent- Tuesday, August 9, 2011-- 3:49 PM(Pacific Time)
Don Macdonald
< Edited by Host >
Re: How do I connect a new Thunderbolt MBP to and old 23" HD Cinema Display ADC port Jul 8, 2011 4:58 PM (in response to Russy47)
Got my new MBP 2011 today. Hooked it up to my 23" Apple Cinema Display fine, using the Apple DVI to ADC converter > Mini Display port adaptors. I could then mirror display, but only at 1440 x 900 resolution.
My dream is to have it like my old laptop--I mostly leave it shut, and main display is on the Cinema Display. So far, if I close the laptop lid on my new MBP, display shuts off. Also, can't get it to bump up the resolution to 1920.
Sigh.

Mid-2012 MBP with 27" Cinema Display SCREEN GOES BLACK WHEN USING USB PERIPHERALS IN DOCK

I haven't been able to find any straightforward answer as to why this is happening and it's becoming one of the most infuriating things in my life, impeding my workflow and costing me unmeasurable time in waiting, rebooting, screwing with cables, etc.
I use my MBP as a DAW for multitracking live audio events to ProTools through a digital console where I work. Here's my gear list that I use every day:
Mid-2012 MBP - Yosemite, 8GB, i7 quad 2.5, mechanical hd
HengeDocks dock for my exact model machine - has set-screw jacks for CinemaDisplay power, Tbolt, FW800, USB, USB, SDcard, headphones, etc
USB wired keyboard
Anker 1x4 USB3.0 hub - I have a TimeMachine 1TB drive, 3TB project backup drive, audio interface and MIDI I/O or PT iLok, depending what I'm working on
Magic Mouse (BlueTooth)
Here's what's happening:
SCENARIO 1 - I insert the CinemaDisplay (cD) power connector and TBolt plugs into the dock, tighten the set screws, close the lid of my MBP (already logged into Yosemite & linked with MagicMouse [mM]) and stick the MBP into the dock... everything comes up on the cD and I can go about my day. At this point, I can plug the USB hub into the back of the cD and the system sees the hub & all peripherals listed just fine.
SCENARIO 2 - Install cD powercon, TBolt connector, USB3 hub, USB keyboard into the dock, close the lid on MBP (again, logged in), insert into dock... cD comes up, looks great for about 15 seconds then goes completely blank. No response from key presses, mouse clicks, threats with a hammer, etc. Then, of course, I have to yank the MBP out of the dock, which hard-disconnects the external drives (backup and TimeMachine... good for them, right?) and causes the MBP to flake, thinking it's still in the dock, then not, then logging me out & requiring a password (not a big deal- I deal with copyrighted stuff, so passwords aren't the issue).
***EVEN IF I DO NOT PLUG THE USB3 HUB INTO THE HENGE DOCK, THE cD STILL GOES BLANK AFTER 15 SEC... IT ONLY SEEMS TO LIKE THE TBOLT AND POWER... NO OTHER PERIPHERALS (fw800, USB, etc)***
It seems like the MBP freaks out when the lid is closed and there are USB/FW peripherals plugged in while using a secondary TBolt display as the main output... seems stupid... if I need a closed-lid dock, the MBP shouldn't care what I have plugged in while the lid is closed. I had the same issues with Mountain Lion & Mavericks and now it's being repeated with Yosemite.
My goal in this exercise is simply to free up the USB jacks on the back of the cD for two reasons - #1) from time to time, I have extra things to plug in and I don't want some massive USB 1x8 hub on my desk... looks stupid; #2) the bottleneck created by plugging in the hub to the back of the cD (another hub via TBolt) almost triples the time required to back up/copy files. I move files from system drive to backup drive & back VERY often due to the nature of my job... speeding up this process would greatly improve my efficiency in the matter. Why would Henge create a dock with all the jacks on it to allow someone to plug into a cD that won't frickin work with said cD? Every other dock I've found makes the user stick the MBP on a slanted, goofy-looking stand and have the lid open or something dumb like that... what I have is the setup I need... just need the USB stuff to work while lid is closed and everything from powercon & cD to USB3 hubs will work without making the cD freak out.
Any ideas out there?

Have now taken the 27" display into the repair shop and after 24 hrs got the phone call - "appears to be nothing wrong with it, will check again on Tuesday and let you know".
I can't seem to find anything on the net describing a similar problem. Everything is working fine right now with the Mac Pro connected to the older 20 inch Cinema Display. In fact, everything seems to be working about a second faster.
I was told by the local retailer that Apple no longer makes the 27 inch LED Cinema Display product and the new display, the "Thunderbolt" will not work with my 13 month old Mac Pro.
***??? In 20 years of owning Mac equipment, this is my first major "uh-oh".

Cinema Display hookup via a Thunderbolt drive

I believe it's possible to run a Cinema Display from my MBP via a Thunderbolt drive, going from the MBp to the TB and then, via a Mini-display to DVI cable, into the display.
I've hooked it up this way with the display also plugged into its power supply and usb'd into the MBP: nothing
When I click 'Find displays' I hear activity in the thunderbolt drive (a Lacie 2big) but that's about it. Nothing shows on the Cinema Display.
I'm doing somethin wrong probably, a familiar scene.
Anyone done this successfully?
(I'm running 10.7.3)

A dvi display with a resolution greater than 1920 x 1200 requires a dual link dvi adapter. I assume you are using a single link dvi adaper (or cable).

How to Connect Early 2011 MBP 13" to Apple 20" Cinema Display at 1680x1050?

My early 2011 MacBookPro will only display 1280x800 on an external Apple 20" Cinema Display. The MBP's specs say that it will support dual displays and video mirroring simultaneously at full native resolution on the built-in display and up to 2560x1600 on an external display. The 20" Cinema Display specs indicates that it supports an optimum resolution of 1680x1050. The 20" display is connected to the MBP through it's Thunderbolt port using an Apple Mini Display Port to DVI connector. No luck.
I've tried using the latest version of SwitchResX set to 1680x1050. It says it is configured to 1680x1050 but the display does not respond.
Anyone had success setting up this combination of MPB and Cinema Display at the max resolution of 1680x1050?

To clarify. The MacBook Pro displays 1280x800 and the Apple Cinema Display mirrors it at 1280x800. I cannot get the ACD to display at it's max capable resolution of 1680x1050.
The MPB has 16GB ram so 512 SDRAM is available to the Intel HD Graphics 3000 chipset.

MBP & Thunderbolt Cinema Display

Similar Messages

Maybe you are looking for