MBP to HDTV won't work - mini displayport to dvi - belkin dvi to hdmi

Hey, I'm trying to get my laptop hooked up to my tv, using the apple mini displayport to DVI -> belkin DVI to HDMI cable setup (as recommended by the dude int eh apple store - which i knew and planned on doing anyway :P).
anyway, when i first plugged it in to the tv in my hotel room it worked, 1080p, then stopped .. then randomly worked again after a few ties. Once I got home i hooked it up to my sharp aquos 42 and worked fine, then after it was unplugged and tried to get it working again, it basically just.. wouldn't - i don't get a picture/signal on the tv, no options in the display cp , nor does the screen go blue when it normally finds a monitor/tv. i've tried plugging it in both ends, restarting, turning tv off/on, everything to no avail. I know the dvi-hdmi cable works, used it from a windows desktop to make sure. the mini displayport to DVI works for DVI 100% of the time into one of my monitors.
as mentioned it had worked at first on and off..., and now i cant get it working on my 1080p tv, nor the 720p one that's in my room, neither of them get a picture/signal; no options in display control panel either, or the quick display flash to blue. Furthermore, sometimes when unplugging the dvi cable from the tv i get the laptop screen flash, as when it picks the device up initially.
I never got my emailed invoice from apple when I bought the cables in in SF during macworld so I cant just return it to apple I'm sure.
any ideas would be greatly appreciated, please help this is making me go crazy... worked and now nothing no matter what i try. Oh, also tried on another, new user to see if it was a weird setting that got saved.
mbp running 10.6.2

I have the same mini display port adapter and Belkin DVI-HDMI cable (but a Panasonic 42" Plasma HDTV) so just set this up on it to see if I could duplicate your problem, unfortunately for you (but good for me) I can't.
I connected the adapter+HDMI cable before switching the HDTV on and then powered up the MBP. It (the HDTV) came up with my background right away (it's set at Mirror not extended Desktop) and when I run System Preferences/Displays get the following. Sorry but all I can confirm is that adapter+cable combination should work ...
Try doing a Parameter RAM reset - hold down command/option/p/r keys at start up and wait for three chimes before releasing the keys?

Similar Messages

MBP + Mini DisplayPort to Dual-Link DVI Adapter + 30" = blue flickering

Hi everyone,
I was wondering if anyone has found a solution to this problem? I use an Apple 30" Cinema Display and it worked fine with my Late 2007 MBP. Now I got a new Core i7 MBP and the Mini DisplayPort to Dual-Link DVI Adapter. At first all works fine, but after a while of use I get blue (and sometimes also green) flickering pixels in areas that are supposed to be black. This does usually not matter while working, but watching movies for example is completely unbearable.
I’ve read a few threads, but most seem to have different problems like 1/3 of the screen flickering or the external display going completely off for a second. That is no issue over here. It is just that the longer I use my setup the more flickering gets added. At first I thought I don’t suffer from this, because it goes from practically flicker-free to totally weird flickering when everything is in use for more than a few minutes.
I’ve set up the Computer Name screensaver. If I run it right after turning on my MBP all is fine. Running it again after 2-3 minutes of use shows the first blue pixels flickering. It does not need 30 minutes to arrive at what seems like more flickering isn’t possible anymore...
Any recommendations or solutions are really welcome!
Things I already tried:
- different USB ports for both the adapter and the Cinema Display
- other power outlets
- powering the adapter from a USB hub or via an iPod wall charger
Thanks
Björn

Björn Herrmann wrote:
I would even try out crazy adapter combinations if there were any available...
At last! I’m quoting myself, because I finally found an alternative adapter which works! I have no more flickering pixels/lines. Black looks and stays completely black as it should! I can finally use dark backgrounds again and watching movies with black borders or dark areas is no longer a pain.
The adapter was very hard to get. It currently is not sold here in Germany and I got it off eBay where there was only 1 available. I’m happy, because I got it for less than 90€ which is even a little cheaper than Apple’s flicker-creator.
The adapter I now use is the Sapphire Active DisplayPort-to-(Dual-Link-)DVI adapter. It has a USB connector for power like Apple’s adapter. The only thing that’s added is the DisplayPort-to-Mini-DisplayPort cable since it is not available with Mini-DisplayPort. Here’s a picture of it:
Hope this helps others, too!
Björn
PS: This adapter seems to be normally meant for ATI’s GPUs in order to connect 3 displays which they call Eyefinity.

Mini DisplayPort to Dual-Link DVI Adapter 1.03 - screen goes black and won't come back

I have a new Mini DisplayPort to Dual-Link DVI Adapter to allow my original Apple 30" Cinema Display to connect to the new Mac Pro. Shipped straight from Apple, it is firmware version 1.03. I've never had flickering issues as so commonly described, but the display will often go black (possibly after a screen power save) and not come back. when this happens I am still able to connect to and use the Mac via remote connection. But the only way to get the screen back is either to unplug the adapter and plug it back in to the Mac, or to shut down and power up the Mac. Is anyone else seeing this issue?

Hello,
From the news page here...
http://xlr8yourmac.com/
See if it's related to this...
It also seems to be related to later OSX versions, like 10.8.x & 10.9.x
The 2012 macs (and later apparently) (also later OSX versions on earlier Macs can do it also), not waking normally from sleep after hours being in sleep. (noted here ...
http://www.xlr8yourmac.com/archives/feb13/022813.html#2012macswontwake
"Why 2012 iMac/2012 Mac Mini won't Wake After Hours of Sleep (Hibernates/Powers Off)")
The sleepimage file still reappears even if never slept. Delete it (hibernate off, etc) - within minutes its back.
A note on that here - http://www.xlr8yourmac.com/feedback/Chameleon_SSD_Optimizer.html
About iMac sleep...
http://forums.macrumors.com/showthread.php?t=1529750
Try this: "sudo pmset autopoweroff 0" and "sudo pmset standby 0"
http://xlr8yourmac.com/archives/sep13/091313.html#10.8.5SleepEjectTip
Two users reported that the opposite worked...
Try this: "sudo pmset autopoweroff 1" and "sudo pmset standby 1"

Mini DisplayPort to Dual-Link DVI Adapter doesn't work on Battery Power

When I'm using the Apple Mini DisplayPort to Dual-Link DVI Adapter to connect a MacBook Air 13" to a 27" Display, it only works as long as the Power Adapter is connected. In other words
Can anyone tell if this is normal behavior?

Hello,
From the news page here...
http://xlr8yourmac.com/
See if it's related to this...
It also seems to be related to later OSX versions, like 10.8.x & 10.9.x
The 2012 macs (and later apparently) (also later OSX versions on earlier Macs can do it also), not waking normally from sleep after hours being in sleep. (noted here ...
http://www.xlr8yourmac.com/archives/feb13/022813.html#2012macswontwake
"Why 2012 iMac/2012 Mac Mini won't Wake After Hours of Sleep (Hibernates/Powers Off)")
The sleepimage file still reappears even if never slept. Delete it (hibernate off, etc) - within minutes its back.
A note on that here - http://www.xlr8yourmac.com/feedback/Chameleon_SSD_Optimizer.html
About iMac sleep...
http://forums.macrumors.com/showthread.php?t=1529750
Try this: "sudo pmset autopoweroff 0" and "sudo pmset standby 0"
http://xlr8yourmac.com/archives/sep13/091313.html#10.8.5SleepEjectTip
Two users reported that the opposite worked...
Try this: "sudo pmset autopoweroff 1" and "sudo pmset standby 1"

Will the old 23" ACD work with the Mini DisplayPort to Dual-Link DVI Adapte

Will the old 23" ACD work with the Mini DisplayPort to Dual-Link DVI Adapter and the new MacBook Pro?
Apple Store says it is for the 30" only.
Thanks ... Ken

I'm not so sure about that. I'd say the jury's still out until someone gets one and tries to use it single-link.

Is the thunderbolt port on the new MBP 13' the same as a mini displayport?

sorry if this is a silly question..

I think that the Thunderbolt port offers the same function as the Display port.
This a working solution that I have, which uses the Thunderbolt port for both Thunderbolt and Display port use:
Macbook Air (mid 2011) - connect to Seagate GoFlex Desk Thunderbolt Hard Drive (Using Thunderbolt cable)
Seagate Goflex Thunderbolt passthrough (it has 2 thunderbolt ports) to a Dell 24 Inch monitor (using Apple Mini DisplayPort to Dual-Link DVI Adapter cable).
Both the Seagate GoFlex and the Dell 24 inch monitor work :-)

New iMAC to Dell 3008 using Mini DisplayPort to Dual-Link DVI Adapter

I just brought the new iMAC 27" iCore7. Previously I was using old MBP with dual link DVI to DELL 3008 and they did fine.
But Today I connect the Dell 3008 to my new iMAC using Mini DisplayPort to Dual-Link DVI Adapter...They could not work properly...
The dell shows images in red with flickers....
I've contacted the phone for help...and they said nothing could be done????!!!!!
Anyone could help??
THX

just update my progress...
I had made calls to Apple technical support center in HONG KONG for help...
To my surprise...they even did not understand what I was saying(Or just pretending...)....One interesting guy said I could take the new iMAC back to service center to change the 4850 display card to older version...or call DELL for help!!!!!
Fuxking Apple technical support center in HONG KONG
I was almost hopeless until I found a minidisplay port to display port cable in Circuit Assembly:
http://estore.circuitassembly.com/products/Mini-Displayport-to-Displayport-Adapt er-Cable.html
ONLY $14.95 !!
They sent the cable to me in 3 days time...and I hooked it up right away when I received it today...my Dell 3008 could display 2560 x 1600 normally again!!!!!
The problem is: Apple is still selling its FUNCTIONLESS Mini DisplayPort to Dual-Link DVI Adapter at high costing....sounds like cheating others....
What' s wrong with the Apple nowadays???

Mini displayport to dual-Link DVI Adapter - flicker issue resolved

I have a late 2013 Imac 27 inch and I had a 30" Dell 3007wfp as my second monitor on the standard DVI adapter for a while at low resolution. I finally got off my behind and bought the mini displayport to dual-Link DVI Adapter... I was excited to see it in all it's glory. It immediately started flickering wildly and I thought I'd do some reading to see how I could resolve it. Pointers to making sure the adapter was version 1.03 didn't help.
http://support.apple.com/kb/ts3232
I already had it. I was getting ready to bite the bullet and just take it back when I decided to see if I had another DVI cable to swap the one I was using out "just in case". I found another one.. same length. Darn it. Then I noticed the DVI cable diameter I was using was significantly thinner than the one I found in my box of etc... What the heck? I thought.
Connected it and BOOM! Vivid colors, high resolution, no more flickers!! Issue gone. Happy days!
Thought I'd post this to possibly help the next schmoe who is in the same situation

Hello,
From the news page here...
http://xlr8yourmac.com/
See if it's related to this...
It also seems to be related to later OSX versions, like 10.8.x & 10.9.x
The 2012 macs (and later apparently) (also later OSX versions on earlier Macs can do it also), not waking normally from sleep after hours being in sleep. (noted here ...
http://www.xlr8yourmac.com/archives/feb13/022813.html#2012macswontwake
"Why 2012 iMac/2012 Mac Mini won't Wake After Hours of Sleep (Hibernates/Powers Off)")
The sleepimage file still reappears even if never slept. Delete it (hibernate off, etc) - within minutes its back.
A note on that here - http://www.xlr8yourmac.com/feedback/Chameleon_SSD_Optimizer.html
About iMac sleep...
http://forums.macrumors.com/showthread.php?t=1529750
Try this: "sudo pmset autopoweroff 0" and "sudo pmset standby 0"
http://xlr8yourmac.com/archives/sep13/091313.html#10.8.5SleepEjectTip
Two users reported that the opposite worked...
Try this: "sudo pmset autopoweroff 1" and "sudo pmset standby 1"

Mini DisplayPort to Dual-Link DVI Adapter

Hi, I am using the Apple Mini DisplayPort to Dual-Link DVI adapter to connect my 30" Apple Cinema Display (Aluminum) to my MacBook Pro 13" Retina, I am passing through the Belkin Thunderbolt Dock, so I connect the Dock to the MBP via the Thunderbolt port and then I connect the Mini DisplayPort to Dual-Link DVI adapter to the Belkin Dock and then to the Apple Cinema 30".
One of the issues I am having is that with the Cinema Display I am working at 2560 x 1600 resolution, much larger than the native MBP resolution, I am also using my apps in Full Screen mode, so when I disconnect from the Cinema Display and go back to use the MBP the apps in full screen mode still are at a higher resolution than the native MBP resolution and they are off the screen. Is there a way to manage a profile with different resolution so the Mac OS will switch automatically resolutions?
Also does the Apple Mini DisplayPort to Dual-Link DVI adapter usb cable supports USB 3.0 ?
Thanks

Hey guys,
I found out an answer by myself...
The missing link : the MacBook Pro needs to be powered... as in you need to plug the charger in...
In conclusion, you simply plug everything, turn on the MacBook Pro, close the lid, and there you go !

Apple's Mini Displayport to Dual link DVI Adapter... What to do?

So i'm doing a new setup with 6 monitors (Eyefinity 6), and i've got everything set up so far... Except for adapters. So i went and got 4 Of those Accel MDP to DVI SL adapters, in addition to the two passive that come with a card. Didn't work...
So i got two Apple Mini Displayport to Dual Link DVI Adapters... And boy, I should have read the reviews before buying them. They are giving me very strange issues. Not going above 800X600, serious graphics corruption on the monitors connected to the apple adapters, or odd resolutions that the monitors do not support.
So i'm wondering what to do. If possible, i'd like to get these to work somehow, as i got them for cheaper than other MDP to Dual Link adapters. They are both plugged in to the USB ports of my mac pro.
I've also heard something about a firmware version, 1.2 or something. Is there a way to update the firmware of these?
Thanks
-C

I'm using the Sapphire 5870 Eyefinity 6 Edition. Two of them in crossfire, supplied their power from an external 1200W PSU Devoted just to them.
It's under Windows 7, running on my mac Pro 2.26.
Hooking them both up to a iphone cube-wall charger keeps them up and running, but they fail to supply the necessary resolution (One only registers 640X The other dimension, the other thinks the monitor is 1920X1080, when it really is 1920X1200).
Not to mention, attempting to use any of them in an extended desktop led to a MACHINECHECKEXCEPTION bsod.
I can't find any sign of what the whole issue is, i'm having issues with the eyefinity setup itself too, so i dunno if its the adapters, the card, drivers, or what. The apple adapters are acting up on me though.

Is an Apple ACTIVE Mini DisplayPort to Dual-Link DVI Adapter the same thing as an old Mini-DP to DVI adapter?

Is an Apple ACTIVE Mini DisplayPort to Dual-Link DVI Adapter the same thing as an old Mini-DP to DVI adapter?
Will a different adaptor give me better resolution between my old computer and a new monitor?
Computer: MBP 15-inch Mid 2010
Monitor: Dell U2713H
Current cable: 20276 3dv ft1 DVI Digital Dual Link with a Apple Mini-DP to DVI adapter to get it to plug into my MBP.
Possible solution?: Apple ACTIVE Mini DisplayPort to Dual-Link DVI Adapter instead of my old adapter above?

Yes. A single-link DVI connection can't drive that monitor at its maximum resolution.
(110544)

Switching between Dell 4K display and Apple Mini DisplayPort To Dual-Link DVI Adapter

Hi All,
I've recently upgraded my home setup to a Dell 4K display (Dell P2815Q), which since the 10.9.3 update work as expected.
However the downside is that my office setup uses a Mini displayport to Dual-Link DVI adapter (Firmware version 1.03) and a Dell 30" display (2560x1600), which will not work without a reboot after using the 4K display. If I use the 4K display after using the Dual-Link DVI adapter it works fine.
Is this a know issue ? If not, I'm happy to provide some more diagnostic information to help resolve the issue.

http://www.everymac.com/ says:
*This model supports a simultaneous maximum resolution up to 2560x1600 on two external displays via Thunderbolt. Alternately, it can support a single display up to 2560x1600 via Thunderbolt and a single 1080p display at up to 60 Hz, 3840x2160 at 30 Hz, or 4096x2160 at 24 Hz via HDMI.
DVI is not mentioned at all. You probably need to connect to the display via HDMI to get the 4096x2160 resolution.

Problem w/New MacbookPro, Cinema 30, Mini DisplayPort to Dual-Link DVI Adap

Hi, I have a new MacBook Pro with Miniport connected to a Cinema 30 using the Mini DisplayPort to Dual-Link DVI Adapter. I upgraded from the previous version of the Macbook Pro w/built-in DVI and never had a problem.
From the moment I started using this new miniport adapter with the Cinema 30, I noticed intermittent graphic anomalies. Most of the time, discolored lines will start rapidly popping in and out across the screen - especially noticeable with dark backgrounds. Here are a couple of quick videos that visualize the problem.
Video 1 - http://is.gd/krM6
Video 2 - http://is.gd/krLT
I'm also experiencing issues with the cursor randomly jumping across the screen.
It's isolated to the 30 cinema and the adapter. The Macbook Pro works fine when connected tot he new 24" LED Cinema.
Any advice on what to do? Is it a faulty adapter? Is there a SW/Firmware upgrade?
Thank you!
http://store.apple.com/us/product/MB571Z/A?n=cable_adapter&fnode=MTY1NDA5OQ&mco= MjkyNjI0Mg&s=topSellers
Message was edited by: bsolis

I'm having the exact same problem. Have you called Apple and if so, what did they say? I read in a magazine that you can switch to the NVIDIA GeForce 9600M GT graphics processor some how with in our computer. I don't know how or if this may solve the problem.

TS3232 I have the mini DisplayPort to Dual-Link DVI Adapter firmware 1.03 and I still have screen flickering issues

I have the mini DisplayPort to Dual-Link DVI Adapter firmware 1.03 and I still have massive screen flickering issues on a Mac Mini 2012.
I am using a Dell 30" monitor (it's the Samsung screen just rebranded) connected to a WD 4TB Thunderbolt drive connected to the Mac Mini.
The screen is usable for the most part when I've just started the computer (although today I started having issues after a fresh restart) but if even just the screen goes to sleep, or the computer goes to sleep and I wake it later, I start to have massive flickering to black and occasionally to snow.
The effect seems to be more likely to arise when I'm on heavy graphics-intensive websites or programs (eg, Tumblr feed with lots of GIF images or working in Adobe Premiere), but once it starts shutting down those programs has no effect, the screen keeps flickering wildly.
The problem improved after the 1.03 firmware upgrade (for a while it was flickering uncontrollably ALL the time and was virtually unusable) but it has not gone away.
Any suggestions would be very welcome, either for how to fix this issue or how to get Apple to, you know, let me TELL THEM that their adapter firmware fix has NOT solved the issue, since my phone support has expired. :/

I have a new Mini DisplayPort to Dual-Link DVI Adapter to allow my original Apple 30" Cinema Display to connect to the new Mac Pro. Shipped straight from Apple, it is firmware version 1.03. I've never had flickering issues, but the display will often go black (possibly after a screen power save) and not come back. when this happens I am still able to connect to and use the Mac via remote connection. But the only way to get the screen back is either to unplug the adapter and plug it back in to the Mac, or to shut down and power up the Mac. This may be a separate issue, so I'll also post it standalone...

Can a Mini DisplayPort to Dual-Link DVI Adapter do the same job as the Mini DisplayPort to DVI Adapter?

Can a Mini DisplayPort to Dual-Link DVI Adapter do the same job as the Mini DisplayPort to DVI Adapter? Meaning, can I connect a DVI screen less than 30 inches? Why would I buy the expensive product? Simply because I might have to sometimes work with a small screen, sometimes with a big, and it would save me the trouble and money of buying both. If the answer is yes, do I have to constantly plug it in USB, even on a smaller screen?

Hi p,
Can a Mini DisplayPort to Dual-Link DVI Adapter do the same job as the Mini DisplayPort to DVI Adapter?
Yes.
Meaning, can I connect a DVI screen less than 30 inches?
Yes.
Why would I buy the expensive product?
Don't know which products you're looking at, so can't say.
Simply because I might have to sometimes work with a small screen, sometimes with a big, and it would save me the trouble and money of buying both. If the answer is yes, do I have to constantly plug it in USB, even on a smaller screen?
A dual link is supposed to handle any single link signal, it just has twice the bandwidth.

MBP to HDTV won't work - mini displayport to dvi - belkin dvi to hdmi

Similar Messages

Maybe you are looking for