MBP video issue
Hi,
recently my 1 year old MBP started to act strange. Randomly the machine locks up and all I can do is keep the power button pressed until it shuts down. The after shutdown at first startup it goes to the Apple Logo screen and then it reboots. At first I thought my machine is overheating but that is a bit strange since I have the smcFanController installed and my fans are at 6000RPM's.
That was 1 week ago, first lookup in 1 year. Since then however just before locking up my screen displays like a patter of short lines with the same color as the active background. For example if my background is has red, white and black then I would get a patter with short oblique lines (about 45 degree angle) with 1 red, 1 white, 1 black and so on all over the screen.
This is becoming very very annoying as sometimes it happens of the middle of something important and I lose all my work. Any ideas what can it be ? Could this be a video card chipset issue or something else ?
Thanks in advance for any help.
3,1 was released in 2007, not 2006.
But you should be covered by the extended warranty if it indeed is the GPU failure. I believe that specific coverage was extended for 3 years, so it would expire on the day you bought the machine sometime this year.
Message was edited by: Shaggywerewolf
Message was edited by: Shaggywerewolf
Similar Messages
-
MacBook Pro 2011 Repair Extension Program for Video Issues -Feedback?
Anybody have any feedback from the MacBook Pro 2011 Repair Extension Program for Video Issues?
I had my early 2011 15 inch 8,2 repaired (free) under the extension program. The machine now appears to run well - but much hotter than before. The case is significantly hotter - especially at the GPU corner and the fans are constantly on moderate to high (not full). Anybody else experiencing similar changes?Run an Apple Hardware Test;
https://support.apple.com/en-us/HT201257
Note an error free AHT is not definitive.
install iStat menus:
http://bjango.com/mac/istatmenus/
Set Activity Monitor to ALL PROCESSES and set CPU to display values from high to low.
When the MBP gets hot, post images of both for inspection.
Ciao. -
Mid 2010 17" MBP video problems
I have a mid 2010 17" MBP that has been having the same video issues as the 2011 MBP But, I guess im out of luck getting mine repaired?
As I said any brand will work just as well as any other brand, so the brand is irrelevant which you buy. All types of RAM are known to work. None any better than any other. This includes whatever brands Apple uses. As long as the RAM has a lifetime warranty and you buy from a vendor with a good return policy then you are in good shape.
If you look for the research you will find that tests of different brands of RAM demonstrated that the brand is unimportant when choosing a product.
I've never purchased brand name RAM in over 20 years for more than 30 Macs I've owned, and I've never had a problem. I happen to purchase mine from Data Mem. -
How can I troubleshoot video issues?
I setup the iPad device (G711) and then placed a call to a Jabber for Windows (G729) phone. Audio worked fine but no video. I changed the Jabber for Windows to G711 and video started working?
Is Jabber for iPad going to support G729 and if so when?
Thanks,
DougHello i have the same issue!
Someone find the cause for this issue?
Regards
Leonardo Santana -
Kernel Panic on iMac with Pixelated Video Issues
One of our work iMacs has been having weird pixelate video issues recently. Sometimes previews of program windows will freeze on screen... and as you move the window around the screen "erases" this preview from the LCD... It is a 2006 24" White iMac 6,1. Now we get some Kernel Panics with the following error message. Please help me decipher it. Thanks!
Interval Since Last Panic Report: 8641685 sec
Panics Since Last Report: 1
Anonymous UUID: E865F049-A575-4D59-A574-9D24C6EFD141
Fri Mar 30 07:35:41 2012
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x43923bb8 : 0x21b837 (0x5dd7fc 0x43923bec 0x223ce1 0x0)
0x43923c08 : 0x2abf6a (0x59e3d0 0x53c01f 0xe 0x59e59a)
0x43923ce8 : 0x2a1a78 (0x43923d00 0x0 0x43923da8 0x53c01f)
0x43923cf8 : 0x53c01f (0xe 0x48 0x10 0x10)
0x43923da8 : 0x53d2f5 (0x78f3000 0x785c240 0x43923df8 0x78f3000)
0x43923dc8 : 0x570fcd (0x78f3000 0x785c240 0x43923de8 0x2a45c9)
0x43923e18 : 0x28bb49 (0x78f3000 0x749a4a0 0x749a4b8 0x2106d8)
0x43923e58 : 0x21dbe5 (0x749a0a4 0x749a484 0x43923ea8 0x3a23)
0x43923e98 : 0x210a86 (0x749a000 0x0 0xbc747a0 0x7f6b690)
0x43923ef8 : 0x216f84 (0x749a000 0x0 0x0 0x0)
0x43923f78 : 0x295c57 (0x7daf5e8 0x0 0x0 0x0)
0x43923fc8 : 0x2a256d (0x7daf5e4 0x0 0x10 0x0)
BSD process name corresponding to current thread: Dock
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
System model name: iMac6,1 (Mac-F4218FC8)
System uptime in nanoseconds: 154254231492
unloaded kexts:
(none)
loaded kexts:
com.apple.driver.AppleHWSensor 1.9.3d0 - last loaded 121081986701
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.InternalModemSupport 2.6.2
com.apple.driver.AudioAUUC 1.57
com.apple.driver.AppleIntelYonahProfile 14
com.apple.driver.AppleUpstreamUserClient 3.5.7
com.apple.driver.AppleIntelPenrynProfile 17
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleMCCSControl 1.0.20
com.apple.driver.AppleIntelNehalemProfile 11
com.apple.driver.AppleHDA 2.0.5f14
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.AppleGraphicsControl 2.10.6
com.apple.GeForce 6.3.6
com.apple.driver.AppleIntelMeromProfile 19
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0a1
com.apple.driver.AppleBacklight 170.0.46
com.apple.driver.AppleLPC 1.5.1
com.apple.driver.AppleIRController 303.8
com.apple.driver.CSRHIDTransitionDriver 2.4.5f3
com.apple.driver.USBCameraFirmwareLoader 1.1.0
com.apple.iokit.SCSITaskUserClient 2.6.8
com.apple.BootCache 31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AppleUSBHub 4.2.4
com.apple.driver.AppleFWOHCI 4.7.3
com.apple.driver.AirPortBrcm43xx 423.91.27
com.apple.driver.AirPortBrcm43224 428.42.4
com.apple.iokit.AppleYukon2 3.2.1b1
com.apple.iokit.IOAHCIBlockStorage 1.6.4
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleUSBEHCI 4.2.4
com.apple.driver.AppleAHCIPort 2.1.7
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleUSBUHCI 4.2.0
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleACPIButtons 1.3.6
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.3.6
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 142.6.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.14
com.apple.driver.AppleIntelCPUPowerManagement 142.6.0
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.4.5f3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.driver.AppleHDAHardwareConfigDriver 2.0.5f14
com.apple.driver.DspFuncLib 2.0.5f14
com.apple.iokit.IOAudioFamily 1.8.3fc2
com.apple.kext.OSvKernDSPLib 1.3
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleHDAController 2.0.5f14
com.apple.iokit.IOHDAFamily 2.0.5f14
com.apple.driver.AppleSMC 3.1.0d5
com.apple.driver.IOPlatformPluginFamily 4.7.0a1
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.1
com.apple.nvidia.nv40hal 6.3.6
com.apple.NVDAResman 6.3.6
com.apple.iokit.IONDRVSupport 2.2.1
com.apple.iokit.IOGraphicsFamily 2.2.1
com.apple.driver.CSRUSBBluetoothHCIController 2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController 2.4.5f3
com.apple.iokit.IOBluetoothFamily 2.4.5f3
com.apple.iokit.IOUSBHIDDriver 4.2.0
com.apple.driver.AppleUSBMergeNub 4.2.4
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.8
com.apple.iokit.IOUSBMassStorageClass 2.6.7
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.8
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6.1
com.apple.iokit.IOATAPIProtocolTransport 2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.8
com.apple.driver.XsanFilter 402.1
com.apple.driver.AppleFileSystemDriver 2.0
com.apple.iokit.IOUSBUserClient 4.2.4
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IO80211Family 320.1
com.apple.iokit.IONetworkingFamily 1.10
com.apple.iokit.IOAHCIFamily 2.0.6
com.apple.iokit.IOATAFamily 2.5.1
com.apple.iokit.IOUSBFamily 4.2.4
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.6
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.TMSafetyNet 6
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 289
com.apple.iokit.IOStorageFamily 1.6.3
com.apple.driver.AppleACPIPlatform 1.3.6
com.apple.iokit.IOPCIFamily 2.6.5
com.apple.iokit.IOACPIFamily 1.3.0
Model: iMac6,1, BootROM IM61.0093.B07, 2 processors, Intel Core 2 Duo, 2.16 GHz, 4 GB, SMC 1.10f2
Graphics: NVIDIA GeForce 7300 GT, NVIDIA GeForce 7300 GT, PCIe, 128 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x87), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Network Service: Built-in Ethernet, Ethernet, en0
Serial ATA Device: ST3320620AS, 298.09 GB
Parallel ATA Device: MATSHITADVD-R UJ-85J
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8501, 0xfd400000 / 2
USB Device: Express USB2, 0x0dc4 (Macpower Peripherals Ltd.), 0x00db, 0xfd500000 / 3
USB Device: Hub in Apple Pro Keyboard, 0x05ac (Apple Inc.), 0x1003, 0x1d100000 / 2
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc50a, 0x1d110000 / 4
USB Device: Apple Pro Keyboard, 0x05ac (Apple Inc.), 0x020b, 0x1d130000 / 3
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8206, 0x7d100000 / 2
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8240, 0x7d200000 / 3Re: Kernel Panic on iMac Intel Core 2 Duo with Lion 10.7.1, 4gb RAM
27-sep-2011 11:53 (in response to jose guzman) Launch the Apple Hardware Test program, run the extended tests at least twice, and then download and run Rember. All indications are that you have bad or flaky RAM.
27" i7 iMac 10.6.8 , Mac OS X (10.7.1), G4 450 MP 1.5 GB RAM w/(10.5.8/10.4.11/9.2.2)
I did that and it doesn't work -
HT5313 What video issues were there on 10.7.4 that got fixed in 10.7.5? Any details?
The OS X update bulletin for 10.7.5 lists that one of the fixes in this update is
* Resolve a video issue with some VGA projectors when connected to certain Mac notebooks.
What is really being addressed? Any details?Hi Tony, Ben and others,
I'm not sure it was the same problem, but a little while ago I have problems too with RADIUS not working on Lion,
and by searching for solutions I found out that it's necessarily to edit /etc/raddb/clients.conf
My problem here it didn't work was with the shared secret.
So I edited /etc/raddb/clients.conf and put at the end of the file :
client 10.0.0.0/24 {
secret = shared-secret-type-what-you-want-here
shortname = private-network
BEFORE I started RADIUS and added AE's to it
I hope it solves your problem too …
GreetingZz John
PS For some strange reason I had to change the
'Wireless Security" from WPA2 Personal ---> WPA2 Enterprice on each AE manualy
But maybe that's just a little bug in when opening the AE in Airport Utility 6.1 cause is WAS
working before I looked into the AE's
PPS iPV6 not changed here
Message was edited by: Abhor -
This is a workaround for the MBP wireless issue
There have been many topics on the MBP wireless issues already, but I thought some people might find this workaround helpful.
Firstly, my system is a 2.2Ghz MBP, running 10.4.10, and also airport extreme update 2007-04. I am using an airport express base station. My previous Powerbook never had any wireless problems, so I really couldn't blame the basestation for the MBPs poor wireless.
Warning - The workaround requires a little bit of work in the terminal. A little bit of understanding of how networks work is assumed here as well. So it is probably not for everyone ...
What I have observed - whenever the MBP loses connection, the airport basestation IP and MAC addresses are missing from the ARP table.
- To view the ARP table, type (in a terminal window) arp -a.
So, when the MBP wireless hangs, open up the terminal and type that in.
Do a Cntrl-C if the arp command is hanging and not returning anything.
In normal situations, a list of IP addresses and MAC addresses will show up.
As others have already noted, clicking on the airport icon in the menubar, will magically bring the wireless back to life. When this happens, the ARP table also gets magically populated correctly. Coincidence? I think not!
So, the workaround is to store a PERMANENT entry in the ARP table for the airport basestation IP and MAC address. In my case, I can use the Airport Utility software to confirm what the basestation IP and MAC addresses are (note MAC address = Airport ID in Airport Utility). I found the basestation IP=10.0.1.1 and the MAC=0:11:24:07:d7:f
To create a permanent ARP table entry for my airport basestation, I opened up a terminal window, and did the following -
1) login to my administrator account
2) type in the following command sudo arp -s 10.0.1.1 0:11:24:7:d7:f
3) type in my administrator password to authorise the change
4) type in (to confirm the changes have been made) arp -a
5) logout of my administrator account (from the terminal)
Ever since I did this, my MBP wireless performance has been flawless.
Note, if you shutdown or restart your computer, the arp entry disappears. This is ok for me as I hardly ever power down my MBP. As insurance I have added an account startup item to remind me to do the arp table entry.
This workaround is great for me because I don't have a need to use multiple wireless networks. It might not be practical for people who roam around onto different networks.
Give it a go and see if it works for you.
Message was edited by: michael loueyOK, after some further experimenting, I changed the multicast rate on my airport express. It was set at 6Mbps, and I changed it to 2Mbps.
I have read that the default multicast rate for previous 802.11g versions of Airport basestations is actually 2mbps. Excellent results so far !! I have set up a terminal command to continuously ping my airport router address every 15 sec, and there have been virtually no dropped packets so far over many hours.
ping -i 15 10.0.1.1
Interestingly, in Apple's Airport Admin software in my MBP there is no option to set the rate at less than 6Mbps (!!!!), so I had to use the Windows XP version of Airport admin software to make this change using a windows machine. Using the XP software you can set the muticast rate as low as 1Mbps.
If you are using Apples airport admin software (Tiger and Leopard) and you commit any sort of change in settings, the multicast rate will be re-set at a minimum of 6Mbps. My understanding of the multicast rate is that setting it too high is similar to shrinking the coverage area of the basestation, and limiting access only to clients who can transmit at the required multicast rate.
So my new theory is that the dropouts are caused by the MBP dropping off the airport due to not being able to achieve the set multicast rate. (this could be due to factors such as low signal strength, excessive interference or noise).
If you are using Apples more recent Airport admin software, you are having a minimum 6mbps muticast rate set, and this might be too high for your particular environment.
Just a theory.
(oh yeah, I enabled interference robustness on the MBP and the basestation just for good measure) -
Audio and Video issue with Windows 8.1 upgrade on Ideapad n585
I upgraded my Ideapad N585 to Windows 8.1 the other day, took forever, but it made it through. Unfortunately, I now get boot erors for the Dolby software, and the AMD Vision/Catalysyt Control Center. Neither of these programs are able to start, from startup or even manually. They just won't run. Sound seems to come out fine still, but I do have video issues.
First off, my computer doesn't seem to recognize a HDtv as a monitor through the HDMI port. I still get an image, but it's set to current screen resolution instead of 1080i. I tried using the detect button to force it to look for a second monitor (my TV), but it showed nothing connected, though at the time I was using two screens. Now my monitor's screen resolution seems to be a little higher than my TV's, but it doesn't fit the screen properly, and will sometimes put a black border around the desktop, not using the full screen. I have also noticed, that when plugged into the tv, if a background program like a screen saver starts (and I am one of the few people who still use them, I like BOINC, sue me), it will reset the screen resolution to what it requires. When the program exits, the screen resolution stays, and that becomes the new max screen resolution until I restart the computer. So far, it only does this through the tv, if I run the laptop monitor alone, it doesn't happen.
I did try updating the software with what's available through the support site, but nothing happened. I even went as far as to use the Windows 9x~XP standbys of completely uninstalling, manually removing everything from the system registry I could find relating to these two programs, and then finally reinstalling the software. Giving the audio and video a complete clean slate to work from, and got no positive results. I restart the computer, Dolby and Catalyst won't boot, and blind to HDtv. Problems as described above still apply.
Anybody else have this issue? Anybody got a fix?have you found a solution to this?
My computer updated to 8.1 without my wanting it to, I have the same problems as you. I installed the video driver because the brightness was locked on what I had it. (the bar would move but did not change)
I searched for brightness and n585 and I was able to find a driver, now brightness works but HDMI still does not. When I plug in the TV both screens go black with all 4 options in the "project" screen.
*edit*
this worked for me i stumbled across this
I unplugged the power cable with the hdmi cable plugged in. Hit (windows key+p) scrolled to duplicate and it worked.I plugged in the power cord back in and it still worked. -
Video issues in mac os 10.6.4 and windows 7 64x
To start with, my computer is the late 2008 model Imac, has 3g of memory, and wasn't experiencing any video problems until earlier this month. I've already had it serviced, and was told that the issue was resolved, and was unrelated to hardware. Fifteen minutes after repair and setup, the exact same symptoms occur.
I'm thinking, Ok, perhaps this is a bad install of windows, since it happened in a windows program (everquest 2, an online game), and rebooted into Mac. Almost immediately, I saw video problems (snow, pixels, lines, distortion)on the mac side, which had occurred with the windows side.
My husband is angry, I'm angry, so I decide that I'm going to trash everything and start off completely fresh. I intended to reinstall mac 10.6.4 after erasing everything, so I removed the windows partition, and attempted to reinstall snow leapard, without using the original leapard disc that came with the system. I didn't realize until too late that I had forgotten to erase the original os, but I figured I'd see if there were any problems and go from there. I had no initial problems with the install of either os (mac or windows), except to note that I couldn't install the apple software updates on the windows side. I was able to fully update the mac side before attempting any installation of the windows os.
I started having video problems really quickly in the windows side after the full installation and update, but the system disabled the initial nvidia drivers and went to plug and play drivers. The only thing that displayed any further problems was the ISight camera, but that was to be expected without the apple updates.
I did read the bootcamp manual afterwards, and saw that my IMac, being an earlier version, might not properly install bootcamp drivers for windows 7 64x, although we had successfully located and manually installed the drivers earlier when first installing windows 7 64x. Keep in mind, I'd had the os installed for several months without any video problems, and in fact, it worked like a dream in both os after the computer had a previous repair of the hard drive, sound card, and logic board.
Anyway, to continue, after the video symptoms occurred on windows, I switched back over to mac to look for and install a video firmware download that I had located through these same forums. I had to change os because it was a dmg, so I did so. Now, I still had the snow leapard install disc in the computer, so that's the first thing I saw on the screen when booting into mac. I immediately started also seeing the pixels and some distortion, but it stopped briefly. I tried bringing up Firefox to get to the download, but the computer froze (showed the little round ball)and wouldn't respond further. I tried several reboots, and could usually at least get into snow leapard, but the computer froze each time.
Finally, after several attempts, the computer won't boot into either os, and won't go into the install disc either. I'm completely at a loss, because I'm told this IS NOT a hardware issue, and the problem was resolved with simply resetting everything. The problem was NOT resolved with that reset, because I'm able to reproduce this issue consistently with multiple reboots, and have even recorded it with a camera I have. I'm at my wit's end, because I'm on a fixed income, and this costs me time and money I just don't have. It's caused me to get behind on one of my bills, because I have to have a computer, and further repairs, while covered under warranty, are going to cost me further money to get to and from the service center. Not to mention the fact that it's going to take another month for me to wait for my money to become available so that I can pay for the ride back and forth for the repair.
Anyone, anyone at all, have any suggestions that may help? I have access to another computer, and can try using that computer to help me boot the other computer up, if I know how. Please, this is so frustrating to me, so I'm hoping someone can suggest something that may help.
I know I mentioned in the post what type of video issues I'm experiencing, but I figured I'd reiterate to make it easy. The computer will display a distorted image on bootup, like a pixelated off-center image. You know, kinda like 2 punch cards held up to each other, with the same holes, but off center. You also get snow, when able to boot up, with the screen sometimes showing half the screen, flickering. Like the screen is broken, but it's not even scratched. And it's not all the time either, if it was, I would think maybe an internal screen was broken or cracked (I've worked tech support for devices with internal screens, so I understand you can have a perfectly good outer screen, but a cracked inner screen). Right now, on bootup, I get that punch card effect, then the screen goes blank. I should mention that sometimes the system will show that, but then boot into windows with no immediate distortion, but will show distortion in the mac side if I'm able to boot into snow leapard. Hope this information helps someone give me an answer that helps.To start with, my computer is the late 2008 model Imac, has 3g of memory …
I'm assuming you mean the Early 2008 iMac since there is no "late 2008" one. AFAIK, it came with 2 GB of RAM standard & the common BTO option would have been 4 GB, so can we assume that you have installed an aftermarket memory module to get to 3 GB?
I've already had it serviced, and was told that the issue was resolved, and was unrelated to hardware. Fifteen minutes after repair and setup, the exact same symptoms occur.
What repair and setup? Is this something you did after getting the iMac back from service? If so, what exactly did you do?
I had no initial problems with the install of either os (mac or windows), except to note that I couldn't install the apple software updates on the windows side.
Do you mean the Windows drivers or something else? Did you follow the Bootcamp install procedure exactly when reinstalling Windows or not?
I switched back over to mac to look for and install a video firmware download that I had located through these same forums.
What video firmware download do you mean? AKAIK, there are none for early 2008 iMacs.
No offense intended, but it is hard to understand exactly what you have done because while you mention much, you don't say a lot about the specifics for a lot of that. In general, it is best to concentrate on those things & keep the commentary to a minimum. -
Video Issues in Adobe Presenter 9
Video issues - I have inserted a 3 minute video in a Presenter 9 file and it plays fine when previewing but only 6 seconds when published. Plays 6 seconds and then buffers. I have tried inserting different formats and still get the same results. Anyone else have this issue or ideas on how to resolve?
Hi there,
I got a solution from the Adobe Captivate technical team.
As an attempt to resolve your issue
Uncheck the option “Accelerate 3D graphics” under VM Settings by going to VM >> Settings >> Display>> 3D graphics
Once done please try capturing and hopefully this must resolve your issue
I did this and it worked, yeah. However, it is still incredibly frustrating using VMWare, when I am recording using Presenter it keeps freezing and I have to shut the entire system down. Guess I'll try the Partition!!!
Thanks again -
I have a iMac G5 20" 2.16 s/n W86494YZVUV that has a serious video issue. What appears to be a set of small lines appears on each side of each icon and the cursor. Additionally, large random angular spikes appear all over making the display virtually unreadable. Is there an economic solution to this issue or is it a throwaway?
Hello.
Once my iMac G5 experienced this blue tint problem.
The solution was to:
Open System Preference > Display.
Click on the highest resolution.
Close Display pane.
Close System Preference.
Hope this helps. -
New motherboard/chip/memory/HDD in previous case with previous video card. No other cards installed.
I get to the WinXP setup screen fine, and choose to format the HDD in NTFS, but then the screen flashes and I get "synch out of range" on the monitor. I tried XPhome as well as pro out of curiosity...I get the same "synch out of range" at various times.
KT4VL
Corsair 512MB PC400
Athlon 2.1Ghz
MSI-8855 GeForce2 ti-Pro (4x AGP)
CD burner, CD reader and 80GB HDD installed
PSU is 300 or 350 I believe
no other cards or devices yet
I made sure to keep all BIOS settings at safe/default levels while doing initial install. Cannot get past the video issue, and I have never seen it before. Any ideas?Sorry...its a Samsung 19" Synchmaster...about 6 months old.
It was fine with the old system, as was the video card itself. I carried them both over from my previous "guts"...an MSI KT2proRaid I think, with Athlon 800.
Initial video signal is fine, and as far as I know it shouldn't switch from basic VGA to hi-resolution until it actually gets into XP. It's nowehere CLOSE to that point when it is in the blue XP setup screens which makes it puzzling. -
Lightroom 4.4 video issues, I think it may be a windows 8 issue.
I am not sure when this started happening or what has changed. I went to import some video and in the import dialog box all my video files show "Preview unavailable for this file" in the thumbnail in the grid view. And if I try to import them i get a dialog box with a message that says Import Results > Some import operations were not performed. > There is a problem with the video file (1) > [Filename].AVI
I am currently using windows 8 and I have imported video to this catalog before from the same camera. The video plays fine in the video players(windows media player, quicktime, and the new video app on windows 8 that is the default player in the OS).
I went throught the http://helpx.adobe.com/lightroom/kb/troubleshoot-video-issues-lightroo m-4.html and did all those suggestions. I am now turning to the forums before I reach out to support.
Has anyone else run into this issue or a simililar one that may be able to give me a workaround or solution?
I am a cloud subscriber and all my programs are up to date. Windows is current, all players are current, and this specific catalog has .AVI files in it from the same camera and the firmware on the camera has never been updated since I started shooting video.
Thanks,
AlexI had the same problem -- also on Windows 8. I was trying to import .MOV files from an Olympus OM-D E-M5 into Lightroom and got the error you mentioned.
I believe it was a problem with my QuickTime installation. I was using an unofficial distribution of QuickTime called "QT Lite", and apparently it doesn't play well with Lightroom. Uninstalled that, installed the latest QuickTime and video imports started to work.
Unfortunately I then ran into this other problem, which sometimes causes video editing to fail: http://forums.adobe.com/thread/972420 -
Best ressources for "ANDROID vs IPAD video issues"
Hello
Would someone be kind enough to post here the best ressources for the "ANDROID vs IPAD VIDEOS issues" ?
I got lots of troubles to have some videos working on Samsung Galaxytab ...
thanx !mm well
Sorry but what is the definition of "inline" videos, I wanna be really sure (i'm not english / in my language my videos are "inline" videos: videos put inside the document).)
On some apps I made, some videos work, some don't. And
one of the main issues are
- they launch full screen when they're not supposed to (i want them to launch in a definite area)
- they dont launch full screen when they're supposed to (when they're suppposed to play in full screen, they just do not appear: black screen)
mmm ? -
Hi.
When I play a video, then I click the green "plus" button on the top-left corn of the window of the iTunes, the iTunes goes to mini player, then I continues to listen the music, when I reclick the green "plus" button, the picture will fast forward style play to the current music playback position. Even I click pause button, the picture still fast forward. Cool, Huh?
So? Whats going on?
AceFurther addendum to this issue. I have gone into the directory for my itunes and using quicktime if I play a show in HD I get the same video issue, if I use the SD version it plays fine. Any ideas what would do this?
Maybe you are looking for
-
How to make a socket connection timeout infinity in Servlet doPost method.
I want to redirect my System.out to a file on a remote server (running Apache Web Server and Apache Tomcat). For which I have created a file upload servlet. The connection is established only once with the servlet and the System.out is redirected to
-
How to populate IDOC segments...
Hello Experts, I was just tasked to add new fields in an IDOC segment. My question is, how do I populate those newly created fields? The data will be coming from a purchase order. Thank you guys and take care!
-
Any Recommendations will be appreciated!
I am looking for some over-the-ear headphones that fit into the iphone plug, (the 5 sets I have dont fit into it.) I would love a wireless, bluetooth pair, but dont know if they exist. Can anyone recommend their headphones that they use with their ip
-
What is the file name .........
of the start up screen containing the recent items in "open a recent item"?
-
I need to know if there ant app for free helps me to filter & hide columns in excel sheet for m iPad ?