MBP wireless does not work, DSL does....all of the sudden.

Hi Forum, I turned on the MBP this morning (while captureing vid on my POWERMAC), to check email. Wireless said I was not connected to internet....but the DSL on the powerbook (and when I plug it into the macbookpro) works fine. Unplug it and no internet connection...though the wireless signal shows strong. i've looked in the forum, help, etc, and can't seem to find a way to actually "connect" again via wireless....i saw something on the forum about WEP but do not know what this is.....can anyone please advise....OK...I'm unplugging the DSL cable now!
Thanks
Mark

hey mark
what kinda of a router do you have and do you know what kinda IP address it is giving your computer?
WEP stands for Wired Equivalent Privacy just a level of security that will be on a network there are a few different kinds that can be set up the type of router you have might give some more insite on this for me
one thing you might try is setting up a test location in the network preferences and try joining again

Similar Messages

IPod model A1059, freezes, unresponsive to all click wheel entries. Reset does not work. Does not show up in ITunes or on windows explorer. What is the problem and how do I fix it?

IPOD model A1059 appears frozen and is unresponsive to all click wheel entries. Reset does not work. Does not show up in ITunes or in Windows Explorer. What is the problem and is there a fix?

If you are unable to reset the iPod (assuming the hold switch is not in the On position either), then you'll have to let the iPod's battery fully drain. Then connect it to a charger and leave it to charge for a couple of hours.
B-rock

My iPod touch needs to be restored. however, all of my movies/apps/songs/photos are not backed up on my computer because the shop on my computer does not work. can i still get the memory on my iPod touch 32gb back?

my iPod touch needs to be restored. however, all of my movies/apps/songs/photos are not backed up on my computer because the shop on my computer does not work. can i still get the memory on my iPod touch 32gb back?

If you weren't able to sync the purchases to a computer previously and now your iPod needs to be restored so you can't sync it now, then you may be out of luck and will need to purchase your content again. Officially Apple does not allow redownloads of purchased items other than iPhone/iPod touch applications and iBooks. The official statement of their policy can be found here, among other places.
You can try contacting iTunes Store Customer Service (select the "Music Purchases" or "Video Purchases" category, as appropriate, then "Lost or Missing Items". You'll find either an "Express Lane" button - just follow the instructions to get to the contact form - or an "Email Us" button) ") and explaining what happened. Reportedly in some cases Apple has allowed redownloading on a one-time basis. But don't count on it.
Good luck.

When the user press the button Calculate Tax (see attached doc) and click on Tax details then this should be updated automatically. But it does not work it is empty and the user has to update manually.

When the user press the button Calculate Tax and click on Tax details then this should be updated automatically. But it does not work it is empty and the user has to update manually.
All setup looks fine.
Please let me know what can be done on this?
Regards,
Peu

HarryAustralia wrote:
I recently updated my ipad wifi only to the new ios 6.1.2 and initially I had the auto cover lock option which can be seen in the Generals tab, but then it stoped working!! Before the update, the auto cover lock worked fine. So after trying all the options, I then did a complete reset on the ipad and now its gone all together from the General tab!! I can no longer see the "auto cover lock" option.
The iPad cover lock is for when you use a cover with magnets in it to lock and unlock the iPad when you close the cover or open it. Try running a refrigerator magnet along the sides of the iPad and see if that trips the iPad Cover Lock back into the settings.
That is not the same thing as the iPad Auto Lock setting which allows you to set an allotted time before the iPad goes to sleep.
You can try resetting all settings to see if the Auto Lock feature retinrs to the iPad.
Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. This can be a little time consuming re-entering all of the device settings again.

My iTunes does not recognize my iPod all of a sudden

Hello, My iTunes does not recognize my iPod all of a sudden. Today before I went running I downloaded some new podcasts to listen to. I plugged in my iPod and for some reason iTunes could not recognize my iPod nano. I run iTunes on Windows 8.1 on a Surface Pro and have successfully synced my iPod before with this system. I do not know why it doesn't work now.
Per the instructions on Apple Help, I went through the troubleshoot steps (i.e., restarting iTunes, restarting my computer, updating iTunes, etc.). When all that failed, I uninstalled iTunes and reinstalled it but this still does not work.
I cannot afford to purchase help through Apple, but I like running and I like listening to new stuff when I run. Can someone please help me on this board? I am pretty good with walking myself through simple computer steps.
Thank you in advance!

Try with the iPod in forced disk mode.
Putting iPod into disk mode.
Still no joy, see this.
iTunes 7 doesn't recognize the iPod.

While updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

while updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

Disconnect the iPad, do a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is 'appsolutely' safe!, reconnect and follow the prompts.
If that does not work then see here http://support.apple.com/kb/HT1808

I have a new laptop and I am trying to download CS3. The site on adobe gives an error message and the one I tried from this forum downloaded CS3 extended, so my serial number does not work. Does anyone have any suggestions. Regards Vicki

Hi,
I have a new laptop and I am trying to download CS3. The site on adobe gives an error message and the one I tried from this forum downloaded CS3 extended, so my serial number does not work. Does anyone have any suggestions. Regards Vicki

The trial is always extended. The serial number you enter determines whether it runs as standard or extended.
I'm getting through fine with that link, so it must be a browser issue or some such thing. Try another browser.

I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

After the Apple logo appears, what happens then? Can you hear any sounds or if you tap on the screen, does it seem like apps can open or are you just seeing a black screen? You might have a hardware problem, but you can try restoring the software and see what happens.
Read this in its entirety before you do anything. Make sure you read the sections at the end about using recovery mode.
iTunes: Restoring iOS software - Support - Apple

I bought Adobe Elements 12; I cannot use panorama photomerge, I have followed the directions to go to Full Edit mode in edit workspace choose File New Photomerge. However the Photomerge does not work, it does not respond. The only thing I can come u

I bought Adobe Elements 12; I cannot use panorama photomerge, I have followed the directions to go to Full Edit mode in edit workspace> choose File> New> Photomerge. However the Photomerge does not work, it does not respond.
The only thing I can come up with is that I found a blog that said that in the Trial version Photomerge does not work, however I do Not have the Trial version, I did at one time but I purchase Adobe Elements. Thank you.

The blog was incorrect. Photomerge should work in the trial, too.
When things get weird in PSE the first thing to do is to delete the prefs. Go to the editor preferences>general, click this button and restart the editor:

HT1688 My volume down button does not work on my phone and the button on the top of my 4s does not work..I bought the insurance on the phone from apple when. It was new

My volume down button does not work on my phone and the button on the top of my 4s does not work..I bought the insurance on the phone from apple when. It was new

Check the status of your warranty here:
https://selfsolve.apple.com/agreementWarrantyDynamic.do
Make a Genius Bar appointment to have your iPhone checked:
http://www.apple.com/retail/geniusbar/

My program does not work properly. I run the program but it is not capable of adding any of my ebooks and when I connect my ereader, it recognises the device but it does not add any ebook either. I uninstalled the program and reinstalled again but nothi

my program does not work properly. I run the program but it is not capable of adding any of my ebooks and when I connect my ereader, it recognises the device but it does not add any ebook either.
I uninstalled the program and reinstalled again but nothing gone better-
What should I do?
Best regards

Do you have Logitech gaming software installed on the PC? If so, perhaps try the suggestion from the following post:
Re: Everytime I close Itunes it loads back up

I have a disc of Creative Cloud 6. Acrobat Pro does not work. I have used the other programs and they are fine, but when I try to open Acrobat Pro nothing happens. I am using Microsoft System 7.

I have a disc of Creative Cloud 6. Acrobat Pro does not work. I have used the other programs and they are fine, but when I try to open Acrobat Pro nothing happens. I am using Microsoft System 7.

what's creative cloud 6? do you mean cs6?
what version of acrobat pro do you have installed and what are you clicking to start it?

I bought this ipod 4 from a friend the lock button does not work and he doesnt know the password? how do i reset and i cant use my computer???? HELP!!!!!!

i bought this ipod 4 from a friend the lock button does not work and he doesnt know the password? how do i reset and i cant use my computer????
HELP!!!!!!

Place the iOS device in recovery mode usning this program and then then restore via iTunes. The iPod will be erased.
RecBoot: Easy Way to Put iPhone into Recovery Mode
For how to restore:
iTunes: Restoring iOS software

HT5634 The "automatic Install" in the windows support software does not work. I cannot see the USB in Windows to manually start set uo

The "automatic Install" in the windows support software does not work. I cannot see the USB in Windows to manually start set up.
I have downloaded windows support software from Apple 3 time with the same result. Where can I get a clean copy of the Windows support software?

Did you correctly format your usb stick in accordance with the Boot Camp installation instructions? Go here to the Boot Camp System Requirements page, http://support.apple.com/kb/HT5634, look for your computer model/year and download the correct version of Windows Support software.

HT203712 I have a 2011 tahoe. My bluetooth functioned properly until I updated my iPhone. Now the iPhone connects to the Tahoe but when I try to call a number it does not work. Either it cals the number and has no outgoing or incoming sound or it just

I have a 2011 tahoe. My bluetooth functioned properly until I updated my iPhone. Now the iPhone connects to the Tahoe but when I try to call a number it does not work. Either it cals the number and has no outgoing or incoming sound or it just says it iis unable to complete the call.

I would check with the Auto dealer where the vehicle was purchased to check and see when the bluetooth software was last updated on your vehicle. With the vehicle being a 2011 and if the software has not been updated since the dropping of IOS 7 then obviously there will be software incompatibilities.
Good luck.

MBP wireless does not work, DSL does....all of the sudden.

Similar Messages

Maybe you are looking for