MBP won't boot up- stuck at grey apple logo? with gear spinning

Ok here's my dilema ...
I've read posts about this same problem but I can't get this mbp to do any of the suggested fixes!!
Here's where I screwed up....
I was playing around with iWeb 09' trying to make a better website for my company... when all of a sudden it wouldn't load from the tool bar it would bounce up and down once or twice and nothing would happen.
I then by mistake put the file on my desktop then wanted to get rid of it so I dropped it into my trash. oops!
Well then everytime I clicked on iweb it would say file is damaged or incomplete.
So when I got home from work I decided to try to reinstall the application with the app disk that came with my computer.
Well instead of being patient and figuring out how to install just the iweb app. I reinstalled the whole bundle !! oops again... I know I don't deserve to be a mac user !! but I've fell in love!!
OK now the install finished and it asked me to restart now so I did ... and this is where I'm stuck...
It restarts and goes to the apple grey screen with a small bar that starts to load and then disappears and gets stuck at the spinning gear.
I've manually ejected the disc by holding down the trackpad. And I put in the os x disc and tried to get into setup by holding down C after I hear the chime and until I see the spinning gear and that doesn't pull up anything!!
What should I do?? PLEASE HELP!!

ok I got into single user mode... comand and s
did the sbin/fsck -fy
got to checking catalog file
-keys out of order
(4,18563)
**rebuilding catalog B-tree.
**the volume Macintosh HD could not be repaired.
***File System Was modified***
:/ root#
What now ?? I'm scared to do anything on my own?? EEK
PLEASE HELP!!

Similar Messages

  • Macbook pro will not boot, gets stuck on great apple logo with spinning wheel.

    I have a Macbook Pro A1287 13" Core2Duo Intel running Mavericks. This morning it would not boot and got stuck at the grey apple logo with the spinning wheel. I have tried:
    1. Resetting PRAM
    2. Resetting SMC
    3. Starting in Safe Mode
    4. Boting to recovery partition and verifiying and repairing both disc and permissions
    Unfortunately none of these have worked.
    I thought after reading other discussions that it may be the sign/start of hard drive failure and that the hard drive may be corrupt.
    The strange thing is that I swapped the hard drive with another macbook pro that I use in work and it boots to the HD no problem, all my files and desktop are as expected.
    So, I thought this must be a hardware issue, maybe something to do with the hard drive cable, the battery or worse the main board, but when I put my work macbook hard drive in my macbook it also boots. Other than swapping the machines, I'm not really sure what to do.
    One thing to note is that I have noticed over the past few months that the clock will have re-set when booting up and that occasionally the machine will turn off with no warning and reboot.
    I would have thought if it was a hard drive problem, the drive would not boot in any machine, and if it were a hardware problem then the machine would not boot with different drive in it.
    Any ideas, would be appreciated.

    Thanks Linc for the swift answer. From what I have read on this discussion board and from other sources the model of Macbook I have does not have a logic-board battery, but may have a soldered on capacitor.
    Also, would this not cause the other drive I tried in the laptop to fail to boot also, as I said in my original post, the machine works ok with a boot drive from my work macbook pro. Just trying to eliminate all possible causes before taking it in somewhere to be looked at by a technician.

  • 2012 MB Pro 13" came with Lion - nearly new, second owner. Stopped responding yesterday in the middle of work. Forced quit, booted up single user, ran fsck -fy, mount -us /, reboot. Stuck on grey apple screen with spinning wheel forever now. Please help

    2012 MB Pro 13" came with Lion - nearly new, second owner. Stopped responding yesterday in the middle of work. Forced quit; reboot stuck on grey apple screen. Booted as single user; ran fsck -fy; mount -us /; reboot. Still stuck on grey apple screen with spinning wheel.
    Any advice please?
    Thanks

    Run through this list of fixes, your solution is there
    Step by Step to fix your Mac

  • Hey Guys i have a problem with my mac since last month and it wont boot up it freezes in a grey apple logo and and spinning gear any body know how to fix this?

    Hey Guys i have a problem with my mac since last month and it wont boot up it freezes in a grey apple logo and and spinning gear any body know how to fix this?

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
    a. Boot into Recovery by holding down the key combination command-R at the startup chime, or from a local Time Machine backup volume (option key at startup.) Release the keys when you see a gray screen with a spinning dial. When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
    How to back up and restore your files
    b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    How to use and troubleshoot FireWire target disk mode
    c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Before reconnecting an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
    Step 3
    Boot in safe mode.* The instructions provided by Apple are as follows:
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    *Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Post for further instructions.
    When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
    If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
    If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 4
    Sometimes a boot failure can be resolved by resetting the NVRAM.
    Step 5
    Launch Disk Utility in Recovery mode (see above for instructions.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it produces. Look for the line "Permissions repaired successfully" at the end of the output. Then reboot as usual.
    Step 6
    Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
    Step 7
    Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
    Step 8
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

  • MacBook stuck at grey apple screen with spinning logo

    I have a 2010 White MacBook that is stuck at the grey apple screen with a spinning logo. This seems to have happened after I installed the newest version of iTunes. The system slowed down a lot and when I ran the system monitor It said all of the memory was being used up. I had to force shut down by holding the power key. Upon reboot, I got the grey apple logo screen, a spinning wheel, and a progress bar. The progress bar gets about a quarter of the way and disappears. The spinning wheel remains. Initially, I let it run for awhile. Nothing different happened. I took off the Mac jack adaptor, and replaced the battery. Nothing happened. I kept trying to start it up and one time it worked. I backed up my files to two external hds via time machine.
    Upon the next boot, i have been stuck at the grey apple logo screen, spinning wheel, and progress bar. Each time the progress bar remains and then disappears after going about a quarter of the way. I have tried cmd-D, cmd-s,cmd-opt-p-r, cmd-v but I don't think any of those work (I don't know of i'm doing them right) . It just stays on the grey apple logo screen. I tried using the option button at the startup and it goes to a lock screen. I typed in the administrator name. That didn't work. I tried the apple password. That didn't work. I tried every password that I know. None work.
    What can I do to fix this?
    Thank you.

    See if this Apple note will help. When it gets to Disk Utility, boot holding the command and r keys down so you get into recovery mode, and run Disk Utility from there. Assume you have OS X 10.7 or later. If you're still on OS X 10.6, then follow directions to boot off the OS X DVD sent with your system or a retail OS X 10.6 DVD.

  • After Update to 10.5.8, stuck on Grey Apple screen with turning gear...

    After Update to 10.5.8, stuck on Grey Apple screen with turning gear... and it just stays there...
    Apparently I can't safe mode it
    Started it in verbose mode and it say disk02 i/o error
    Then I restarted it in single user mode, did a sbin/fsck -fy and it says that:
    *files have been modified*
    *REBOOT NOW*
    I reboot and still the same problem.
    When I put in the install disk it says *cannot install in this drive* (was thinking about archive and reinstall, but I suppose not ) then when I repair and verify, it says All seems OK
    Yikes. Yikes!
    Please help.
    Message was edited for additional clarity by: BrzrKrk

    Well, I brought to the Apple Store's genius bar. Can't say enough about the experience... they archived and reinstalled... tried everything else and like sometimes happens, transfer of data can become corrupt in a spot that just makes things go haywire. So the Archive and Reinstall worked like a charm.
    Moreover, they replaced my Macbook's top board casing (don't know what else to call it..) (where you rest your hands to type) it was cracked and stuff... not under warranty, but they will replace it free due to design ... I am impressed and pleased... *and me? I am a cynical critic* still, they made the experience as painless and certainly pleasant as possible.
    For all who are having problems, I urge you to not damage the wall any further with continuous headbanging: make an appointment and definitely visit the Genius Bar. Your head will thank you

  • My computer won´t boot and restarts at Apple logo with the spinning thing

    My computer won´t boot and restarts at Apple logo with the spinning thing and I can´t get it to work.
    Before this happen I had left the computer on without a cable plugged in and so it ran out of power.
    I just pressed the startbutton again after I´ve plugged it in and this problem started.
    Any ideas?
    Mattias
    Sweden

    WRONG FORUM Sorry

  • I was in the middle of updating to 7.0.3 and Itunes stopped working. Now my phone is stuck in limbo (apple logo with status bar under) My power button doesnt work (of course) How do I get it back to normal?

    I was in the middle of updating to 7.0.3 and Itunes stopped working. Now my phone is stuck in limbo (apple logo with status bar under) My power button doesnt work (of course) How do I get it back to normal?

    I have same issue. I click on the home button and Wake/sleep at the same time for 30 seconds or more and then the phone entered in Recovery mode. It is erasing my content now and installing the update. Let´s see how this ends. I have iCloud, iTunes match, and backups from previos versions, hope I can restore all my content.
    Otherwise I´ll go to the Genius Bar to do a checkup.
    Good luck!
    It did not work the first time... The iPhone4 kept in limbo. Then I did disconnect as suggested above and tried again to enter in Recovery mode.  This second time it works. And after restoring the iPhone4 with 7.0.3, it asked me if I want to recover from backup. I did recover from my latest back up and now it is syncing the content.

  • HT1451 I am trying to restore my iphone but its stuck at the apple logo with the progress bar. What should I do?

    I am trying to restore my iphone but it has been stuck at the apple logo with the progress bar and it shows no signs of loading at all. What should I do?

    Hello kuukua.b,
    Thanks for using Apple Support Communities.
    Please try to restart and reset your iPhone by following the steps below, and then resume your restore process.
    Turn your iOS device off and on (restart) and reset
    http://support.apple.com/kb/ht1430
    Take care,
    Alex H.

  • My iPhone 4S got stuck on the apple logo with the progress bar!

    Afternoon. My iPhone 4S got stuck on the apple logo with the progress bar! but every time after I restore the 4S the progress bar starts again and stops at different stages of the loading process! Can anyone help with this please?
    All this started happening after I tried to download the lastest update (iOS 7.1). The 4S went and got stuck on the apple logo and progress bar!!

    Hello kuukua.b,
    Thanks for using Apple Support Communities.
    Please try to restart and reset your iPhone by following the steps below, and then resume your restore process.
    Turn your iOS device off and on (restart) and reset
    http://support.apple.com/kb/ht1430
    Take care,
    Alex H.

  • I've tried safe mode but I dont understand what is happening. I tried pressing the power button on and off for several times and nothing happens, I'm always stuck on an apple logo and a spinning wheel. I dont know how to get to the Partition and the DiskU

    I've tried safe mode but I dont understand what is happening. I tried pressing the power button on and off for several times and nothing happens, I'm always stuck on an apple logo and a spinning wheel. I dont know how to get to the Partition and the DiskUtility. The Apple Logo and the Progress Indicator will continue to spin and I have literally no idea what to do. i am in desperate need of help. help me pls

    Turn it off.
    Start it up again and (at the sound of the chime) press and hold the command and the R keys, hold them down until Recovery loads. When it does you will select Disk Utility and you should be on the First Aid tab when it opens, if you are not please select it. Then select the partition (in the side bar, 2nd entry on the list, see picture).
    Yours is probably called Macintosh HD.
    Once you have selected it go to the lower righthand corner of the First Aid dialog and press Repair Disk.
    This will take 10 minutes approximately. Post back when it is finished and tell me what it says.

  • I've tried safe mode but I dont understand what is happening. I tried pressing the power button on and off for several times and nothing happens, I'm always stuck on an apple logo and a spinning wheel. I dont know how to get to the Partition

    I've tried safe mode but I dont understand what is happening. I tried pressing the power button on and off for several times and nothing happens, I'm always stuck on an apple logo and a spinning wheel. I dont know how to get to the Partition and the DiskUtility. The Apple Logo and the Progress Indicator will continue to spin and I have literally no idea what to do. i am in desperate need of help. help me pls

    Reboot hold the command R for recovery.

  • MacBook won't boot - stuck showing the Apple logo and the spinning circle.

    Hi.
    My MacBook suddenly froze when I was using it today. Displaying the spinning beach ball.
    It never came out of it, fan running at max speed, so I tried to force restart it (Control-Command-Power), but that didn't work, so I forced the MacBook off (holding the power button pressed.)
    When trying to start the MacBook again it couldn't boot. It kept displaying the grey screen, with the Apple logo and the spinning circle below the Apple logo.
    I left the MacBook like this for 10-15 minutes, but nothing happened.
    Went on to try the following.:
    *- Removed the AC-adapter and battery for 5 minutes.*
    *- Command-Option-P-R (Resetting PRAM and NVRAM).*
    *- Resetting System Management Controller (SMC).*
    *- Command-S (singleuser boot)*
    And checking the HDD with sbin/fsck -fy
    = "The volume ** appears to be OK."
    *- Command-V*
    Stops on the following line, and fan ramps up to full speed.:
    DNSServiceRegister("ssh.tcp."): -65537)
    Force reboot didn't work. Had to force it off.
    But, nothing helped.
    It simply won't boot.
    I also tried to boot Ubuntu 7.10, but it hangs after a short while displaying "Kernel panic".
    Force reboot didn't work. Had to force it off.
    Also tried the option to boot from the first HDD (in the boot menu on the Ubuntu 7.10 disc), but that didn't work either. Only got a black screen, with a blinking cursor top left, and fan ramping up to max.
    Again, force reboot didn't work. Had to force it off.
    The only thing that has worked so far is exiting the Ubuntu 7.10 CD boot menu, and pressing enter on the prompt that appears.
    But, after rebooting, the MacBook still refuses to boot into Mac OS X.
    I left the MacBook alone, hoping it would work its way out of the spinning circle, but after 2 h 38 min nothing had happened.
    Does anyone know how to fix this?
    :. nattugglan

    This happened to me last night.
    I was updating my iPod and I got a message saying that it needed to do an update. I installed the update and went on ahead putting new songs on my iPod. When it was finished i ejected as I usually do and closed down.
    When I went to check me e-mails this morning the Macbook would not boot. It sticks on the grey screen with the Apple and the spinny disc underneath, then it restarts and sticks on the same screen. The last software to be onstalled was Norton 11 on Monday but I have used the Macbook since. I cannot think why it will not boot.
    I am loathed to do a reinstall as I have some things on the Macbook that I had not yet backed up.
    Any advice?

  • PowerPC Mac Mini gets stuck at grey apple logo screen, wont start

    I have a bit of a problem and would appreciate some help, im not especially good at this stuff.
    My Powerpc Mac Mini froze up recently, having left it on for a few days without shutting down/resetting. I impatiently turned it off with the power button at the back. When I turned it on again, it only got as far as the grey apple logo screen, it now refuses to go past this screen despite numerous power resets, and unplugging at the power.
    I have reset the PMU and the PRAM as suggested by the troubleshooting, to no avail - the PRAM did work as it changed the resolution of the apple logo, but still got stuck at the grey startup screen. Its out of warranty so I have to pay for technical support. Can anyone help?
    Message was edited by: misternuge

    If you have the original install disk that came with your mini, the first thing to do is to insert that, and then boot the system holding the C key down. This should force it to boot from the install disk rather than the internal drive. The reason you want to do this is two-fold: firstly that if it boots OK that way, it shows the basic hardware is OK, and secondly, it's possible that the hard drive has developed errors (likely directory damage) and the tool to check for that and attempt to resolve it is on the install disk.
    Once you've got the system booted to the install disk, exit the installer and run the Disk Utility application. That should display the internal drive (and the install disk) on the left. Select the internal drive and then click 'Repair Disk'. If no errors are found, the drive is fine and the problem lies elsewhere. If errors are reported and the disk is fixed, then you should be able to reboot normally afterwards. If errors are found and Disk Utility reports 'error on exit' not having fixed them, then run it again just to be sure, but otherwise it means the drive is damaged sufficiently that Disk Utility can't fix it. A third-party application such as Alsoft's DiskWarrior will then be needed if you want to try and fix the drive and recover data, or you can simply elect to do an erase and install, meaning the drive will be reformatted and a new copy of MacOS installed. Do not do this if you have data you need to get off the drive!!

  • Screen stuck on grey apple screen with a loading sign

    I thought i had lost my charger and i wasnt willing to fork out the money to buy one for awhile. During a recent move i found it. I charged it up but when i got to my login screen i kept trying to type my password and it wouldnt except it. After looking online i found several posts about click buttons i dont remember what exactly i clicked but it was along the lines of " option and the R key" Another screen popped up and it had several options one of which was to try to do a back up/ restore it through timemachine. I treid that and it wasnt working. I went back to the screen and saw an option that said install the lion thing. i tried that and it didnt work. I was frustrated so i decided it would be best to just shut down my computer and try again when i was less riled up. Well now it has been stuck on the grey apple screen with a loading sign under it for atleast a day now if not longer. I have no idea what to do. I'm not sure if i have apple care or not. Oh and not really sure what operating system i was using.

    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Maybe you are looking for