MBP won't load CDs

Hi,
Suddenly my 15 inch MBP is having problems loading audio CDs. It accepts and plays one and then rejects any others. It struggles to load, tries a few times then ejects disc without giving a message of any sort. If I restart it plays the first disc then rejects others. All the discs are commercial products. A DVD loaded ok. Anyone have any clues?
best
d

Well in as much as they work at home one would assume that there are issues with internet service at your place of work or for some reason they are blocking web sites. As long as you have no issues at home it would seem that your MBP is OK.

Similar Messages

  • Itunes won't load CDs automatically and I have to restart it everytime to load 1 CD. I have ensured I have latest Itunes, latest DVD driver, start itunes from program library in safe mode but nothing works. Any ideas ?

    Itunes won't load CDs automatically and I have to restart it everytime to load 1 CD. I have ensured I have latest Itunes, latest DVD driver, start itunes from program library in safe mode but nothing works. Any ideas ?

    I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
    When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
    At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
    I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

  • IPhoto[v 9.5.1] on MBP won't load photos from iPod touch Gen4 32GB, even if let run overnight

    iPhoto [v 9.5.1] on MBP won't load photos from iPod touch Gen4 32GB, even if let run overnight and don't let machine go to sleep.
    MBP has 8GB Ram and separate video card using 2.3 Ghx i7 processor ... so i don't think it is a hardware issue.

    Hello A_MadDog,
    It sounds like you are not able to import photos from your Camera Roll on your iPod touch.  I recommend following the steps in the article below for the issue you described:
    iOS: Unable to import photos to computer
    http://support.apple.com/kb/ts3195
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Tried to install OSX Mavericks now MBP won't load

    Hi all
    Last night I tried to install OSX Mavericks on my MBP mid-2010 running Mountain Lion. It downloaded fine and then seemed to install fine. When the message came up saying it was going to restart automatically the spinning wheel hanged, which was the first problem. I switched off the MBP and turned it on again. It now refuses to boot up and stays on the Apple bootup screen with the spinning wheel.
    I've tried to restart in recovery mode but this doesn't seem to work. It just goes back to the spinning wheel and there is no progress bar that pops up to indicate the recovery data is being downloaded from the net (I don't have a recovery partition).
    I have a backup external hard drive that I can use to restore my MBP and then try upgrading again, but I can't use that until I get into recovery mode.
    Is anyone able to help?
    Thanks

    Ok so I worked out how to get into recovery mode. Turns out I was doing it wrong! I used an external USB drive to access recovery mode.
    I ran disk utility which identified and fixed some errors on the HD. I thought this might solve the problem but when I restarted the same problem occurred. I then restored my time machine backup which thankfully worked.
    I tried installing mavericks again! Upon restarting and completing the install, I got the message 'OSX has been installed. Your computer will now restart'. After the countdown had finished I got the beach ball which span eternally again, just like last time. After about 10 mins I did a hard reset and again OSX won't load.
    Lame...

  • MBP Won't load - stuck at grey apple logo

    Ok here's my dilema ...
    I've read posts about this same problem but I can't get this mbp to do any of the suggested fixes!!
    Here's where I screwed up....
    I was playing around with iWeb 09' trying to make a better website for my company... when all of a sudden it wouldn't load from the tool bar it would bounce up and down once or twice and nothing would happen.
    I then by mistake put the file on my desktop then wanted to get rid of it so I dropped it into my trash. oops!
    Well then everytime I clicked on iweb it would say file is damaged or incomplete.
    So when I got home from work I decided to try to reinstall the application with the app disk that came with my computer.
    Well instead of being patient and figuring out how to install just the iweb app. I reinstalled the whole bundle !! oops again... I know I don't deserve to be a mac user !! but I've fell in love!!
    OK now the install finished and it asked me to restart now so I did ... and this is where I'm stuck...
    It restarts and goes to the apple grey screen with a small bar that starts to load and then disappears and gets stuck at the spinning gear.
    I've manually ejected the disc by holding down the trackpad. And I put in the os x disc and tried to get into setup by holding down C after I hear the chime and until I see the spinning gear and that doesn't pull up anything!!
    What should I do?? PLEASE HELP!!

    Hello and welcome to the discussions, I would try three things first. I reset SMC (unplug the MBP and remove the battery. Then hold the power button down for at least 20-30 seconds) Replace battery, plug in and try starting in Safe-Mode (press and hold the left "Shift" key after hearing the startup tone. Release when you see the Apple logo. Safe-Mode takes a long time to load...be patient.
    Next I would try to repair the disk. Start in Single-user mode (Press and hold the "Apple/Command" and the "S" keys after hearing the startup tone. Release when you see the Apple logo or the screen goes to a black and white text. If this works wait for a command prompt it will be a "#" then type in "/sbin/fsck -fy" No quotation marks and a space between fsck and -fy.
    This will repair the disk. If ANY repairs are made repeat the above command until none are made.
    Then type "reboot" again w/o quotations.
    Third I would boot in Verbose mode (press and hold the left "V" key after hearing the startup tone. Release when you see the Apple logo or it starts displaying text. The MBP will freeze at some point but you will be able to see what is failing. Write it down and get back to us.
    Cheers,
    Glynn

  • MBP won't load some sites on the net ???

    Hi,
    At my work i can't load som epages on the net. Some works fine but others don't....When I get home everything works well. i think it's the way the net at work is set up, but i'm not sure. Our net at work is wuite slow, can that be the cause ? It tells me that *"the server stopped responding"*
    Any ideas ????

    Well in as much as they work at home one would assume that there are issues with internet service at your place of work or for some reason they are blocking web sites. As long as you have no issues at home it would seem that your MBP is OK.

  • MBP Won't Burn CDs Using External Drive

    My internal optical drive in my 2006 MBP died because of something getting stuck in it, and I just got an external drive to replace it (Samsung USB 2.0 8x DVD Writer External Optical Drive for Mac and PC SE-S084C/RSBN). If I hook it up and put a DVD in, it functions normally - the DVD Player opens and plays the DVD. If I put a blank CD-R in, the box saying that a blank disc has been inserted comes up and give me the option of opening iTunes, etc. But then if I hit "Burn Disc" in iTunes or a Burn Folder from the Finder, it tells me to insert a blank disc. It seems to only recognize the internal (non-functioning) drive and not the external one when I want to burn CDs. Anyone have suggestions on how to fix this?
    Thanks!!

    Welcome to the discussion forums-
    How about if you where to drag to the desktop the following file:
    com.apple.DVDPlayer.plist
    You can find it in your user/home folder/library/preferences/com.apple.DVDPlayer.plist
    Restart your computer and see if this solves the problem. if it does you can trash the plist file are return it if no change.

  • Start Disk Full MBP won't load beyond background image

    Hello! My start disk was warning me it was approaching 'full' so I went out & bought an external hard drive.. backed up one user (primary) on the hard drive, then logged out so I could log in as the other user to back up that side of the computer's data, & when I logged in there all that loaded was a purple background (not my normal background) No access to any icons, applications, data, magnifying glass, etc.. nothing loaded basically. So I tried to log back in as the original user & ran into the exact same probelm, except from here I can access A SINGLE window of Safari.. it automatically loads just the Safari bar at the top & I can browse the internet still.. but cannot open any content such as youtube or download of course, also cannot open any other applications though it will open garage band's bar, just no files..
    I would like to know what I need to do to be able to get in to either profile so I can delete at least enough files or get my computer to at least let me back up that other user so I can do whatever you recommend I need to to get my computer working again. Thanks!

    After that, check the S.M.A.R.T. status on your HD: Boot from install disc (insert disc > restart > immediately hold down the c key and keep holding it until you see “Preparing Installation”) > at first screen select the language and click Continue > click on the Utilities Menu in the menubar > select Disk Utility > select your HD in the panel on the left side (the name of the HD’s manufacturer and the model number, usually the top item in the list) > look at the bottom of the main window next to S.M.A.R.T. status and see if it says “Verified” (good) or something more ominous like “Failing.”
    If S.M.A.R.T. status is "Verified," run Repair Disk > click Repair Disk at bottom of main window. Run this at least twice, and keep running it until it says “appears ok” twice in a row. If that doesn’t happen,you may need a stronger utility (such as DriveGenius, TechToolPro, DiskWarrior) or if the directory is damaged beyond repair, you may need to reinstall the OS, or you may have a damaged HD which will need to be replaced (repair utilities can only repair the directory structure, not the HD itself). When this is finished, quit Disk Utility, quit the installer, and restart. Once booted normally, go to Applications > Utilities > Disk Utility and run Repair Permissions.

  • I updated Mavericks yesterday. Now my MBP won't load.

    It shutdown to install the update.  When it came back up, it was at the grey apple logo, but there was a progress bar under it.  I assumed this was part of the installation as I had never seen it before.  Well, the progress bar finished, but then the computer turned off.  So I turned it back on.  I did this several times, and found out that the progress bar usually shows up if it wasn't shutdown properly.  So then I ran disk utility, and now it says it can't repair the disk..disk,and restore your backed-up files. What happened? Has my hard drive crashed?  I dont understand.  Everything was fine until the update.  Is there anything that can be done to save my files?! I'm an idiot (and I'm lazy) so I haven't backed anything although I'm trying.  I have an external hard drive connected and trying to save an image in DU, but the screen went blank last night so it is taking forever.  Any and all help would be appreciated! THANKS

    Try this:
    Unplug all peripherals (external drives, printers, hubs) and network cables.
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • MBP won't load purchased books in iBooks Mavericks

    Downloads start but fail before completing.  The error message I get is "To try again, select Check for Available Downloads from the Store menu."
    I tried that and get "All updates and purchases have been downloaded for this Apple ID."
    Any ideas how to fix this?

    the iBooks 1.01 update did not fix it on my side - sorry

  • Apple TV won't load or play movies from my MBP library (through both airplay and homesharing), but will from my mac mini. Help!

    I have been using my apple TV seamlessly with all my apple products (Mac Mini, iphone, MBP, ipad). Everything worked perfectly until recently (I noticed the issue about 3 weeks ago), when the apple TV won't load and play any movies from my iTunes library located on my MBP. The Library loads, and I can see everything, but as soon as I press play, the spinning load icon appears and doesn't stop. Same when I play movie from itunes directly and send it via airplay. Desktop mirroring no problem.
    I have checked, and films are being played perfectly from my other devices, as does airplay and mirroring

    Hello Tourneurm,
    Thank you for contacting Apple Support Communities.
    This article might be of use for your issue.
    Troubleshooting Home Sharing
    http://support.apple.com/kb/TS2972
    Section 8 seems to be most applicable.
    8. Cannot access my library when my computer is asleep
    For Apple TV to access your library while the host computer is asleep, "Wake for network access" must be turned on.
    Open System Preferences > Energy Saver and select (enable) the "Wake for network access" option.
    In addition, the network that the host computer and the Apple TV (2nd or 3rd generation) is connected to must support Wake on Demand feature. This works by partnering with a service running on your AirPort Base Station or Time Capsule called Bonjour Sleep Proxy.
    This article could also be of use.
    Apple TV (2nd and 3rd generation): Troubleshooting playback performance
    http://support.apple.com/kb/TS3623
    Regards,
    Jeff D.

  • ITunes won't load the songs from purchased music CDs

    When loading purchased music CDs, the CD loads but iTunes won't load the songs.  Error message:  "The current encoder settings for bit rate and sample rate are not valid for the file."  I'm using an iMac PPC G4 with 768 MB RAM and OS 10.4.11 with iTunes 4.7.1. If I copy the songs into a folder I can push them into the iTunes library but these are huge AIFF files with no info and the machine can't (won't) transfer them into AAC files.

    To what format are you trying to convert? What settings are you using?  Has this just started or is this the first time trying this?  I really don't know what the limitations are for iTunes 4.7.  I thought I was being a luddite in sticking with 7.5....
    Try an alternative ripper such as XLD or Max.
    X Lossless Decoder: Lossless audio decoder for Mac OS X - http://tmkk.pv.land.to/xld/index_e.html
    http://sbooth.org/Max/

  • MBPro won't load some CDs

    13" mid-2010. 2.66 GHz; 8 GB RAM
    The CDs do play on my car's stock CD player. This happens with some shrink-wrapped CDs straight from a store, and some CDs borrowed from the library. Entirely unpredictable as to which ones will fail.
    What's the likely source of my problem? Is it the drive? If so, can it be fixed? Is there a treatment I should apply to the CD if it won't load?

    I would make certain that the lens is clean on the DVD drive,  Use a lens cleaning disk or wrap a fine microfiber cloth (eye glasses cleaning cloth) around a business card and insert it gently into the slot.
    Ciao.

  • YouTube won't load on Safari, Firefox or Chrome (on MBP)

    Just in the last couple of days, my MBP stopped loading YouTube. It doesn't matter which browser I use, it won't load. Ironically, it WILL load on my husband's iMac. It's just started the last couple of days.  We're on the same network. I've emptied the cache, deleted history, ran a disk utility, rebooted the Airport and the Modem, still nothing seems to help.  Not sure what sort of settings to check for. I tried updating flash, but still nothing.

    Have you reinstalling Flash? Download and install from http://www.adobe.com/downloads/ . Perhaps your Flash has become corrupted.
    Have you tried using the Chrome browser, which has Flash built into it, versus relying on the separate Flash module (assuming that Flash is the common component causing the issue)?

  • CDs won't load or play

    MacBook Pro...been using it to download audiobooks with no problems. Today went to insert CD in to drive and it won't load up. Tried a few that I have used in there before, same thing. CD sits in there. I hear one noise like it's going to load, then it kicks it out. ??????

    Is your DVD drive being recognized in the system profiler?
    You can run a AHT (Apple Hsrdware Test) newer Mac's by rebooting holding the D key.
    For Intel-based Apple computers shipping with Mac OS X v10.5.5 or later, Apple Hardware Test is located on the Applications Install Disc 2 and should be included with your computer.

Maybe you are looking for

  • There was a problem connecting to the server ... OS 10.8.4 + WD NAS

    Dear all, first my configuration: iMac from mid 2012, MacOS X Mountain Lion, 10.8.4, iPhoto 09 v. 8.1.2 - all software updates done and up-to-date MacBook Pro late 2011, MacOS X Mountain Lion, 10.8.4 NAS WD My Book World Edition II (white light), 2 x

  • Sales order is blocking while credit limit is exceeded ...

    Dear Friends , Client issue  regarding credit management , all customers are defined under low risk category , in OVA8 transaction code we activated  i) For Static credit check : reaction D & status Block checked & open orders , open deliveries are b

  • Scope of List in ME3M, Vendor List per Material Group

    Dear Experts, In ME3M, ME3L or ME3C, Can we define one of the criterias in F4 list of the scope of list as PR (Non-Service) only during searching Purchasing Documents? Is it possible to adapt material group and vendor list  with corresponding validit

  • Detect of Oracle Server is available

    I need a very primitive way to detect the existence of an Oracle Server, preferably by opening a port via a TCPClient call with ASP.NET. With SQL Server you can telnet to port 1433. I've used ASP.NET and just connected to to the port to see if the se

  • RH_STRUC_GET change version 4.6 to 6.0 lose of data

    Hi, i'm using this function module "RH_STRUC_GET", and i found an error with the same parameters in the 4.6 and 6.0 version and the same data in the tables, the function import a table with 58 results in 4.6 version  and 57 in the 6.0 version. the ev