MBP won't read my SD card?

So here's the issue:
My MacBook Pro won't read my 4GB SD card from my camera. I was able to transfer all of my images earlier this afternoon but now it plainly won't show up. I checked Finder, I checked Disk Utility, and nothing. The Nikon software doesn't recognize it either. It's not like I have a whole boatload of photos to transfer (I only have four pics to transfer). Earlier, I installed the software after I ejected the card, but did not put it back in afterwards. Could it have something to do w/ the software I just downloaded?

If you are using a DSLR camera, like for example a Canon 60D, there may be an option to use a "Low-Level Formatting" on the card. This should make it writable when putting it into the computer.
To test this (and confirm it works) I did the following:
Hardware Used:
Canon 60D camera body
Sandisk 32GB SDHC Extreme Card
Macbook Pro 15" (mid 2010 model) with built-in SD card slot.
Steps:
Place SDHC card into camera (SD card may work as well). Navigate through menu until you arrive at settings that allow the camera to format the card. There may be an option to format it "low-level", which you would then select.
-Note that all files on card will be erased permanently.-
After the camera formats, eject the card from the camera, and place inside the built-in SD slot on the Macbook.
The card should automatically mount, containing both read and write priviledges.
Hope that helps.
~Charlie~
Owner/Founder HotTips! LLC
<Link Edited by Host>

Similar Messages

  • MBP won't read SD card, but will read CF card with the same card reader

    As the title says, I have a card reader that works great with a CF card, but the MBP won't recognize an SD card. This is a new problem for me. I also have an express card adapter for SD that won't read the card, either. I have tried 4 different SD cards, and these exact cards have worked for me in the recent past (within the past 2 months). They work fine in the camera. I also tried connecting the camera via usb, which was unsuccessful. I tried blowing air on the cards and the reader. I cannot get the cards to be read on my wife's macbook. This makes no sense to me, as it worked fine the last time I tried. I find it hard to believe that all cards are corrupt, or the cable is the problem because it reads the CF card.
    Any help is greatly appreciated!

    check if the SD Card is a SDHC card and if the card reader can read that. I know I have a friend who had this issue and in the end had to buy a new card.
    Camera to MBP issue could be resolved by changing a setting on your camera. On my Nikon D300 I need to set the camera to MASS STORAGE in order for MBP to detect it like a drive.

  • Won't read my memory card

    Hello! My macbook pro won't read my memory card (transcend) anymore. It used to work fine but I don't know why just recently it won't. I've tried the little lock and unlock option on the card but still nothing.
    Help?

    Hi lostpuppy671,
    If you are having issues mounting your memory card on your Mac, you may find the following article helpful:
    Apple Support: About the SD and SDXC card slot
    http://support.apple.com/kb/ht3553
    Regards,
    - Brenden

  • MBP won't read microSD card with adapter

    My MBP won't recognize/read/mount a microSD card when I put it in an adapter and then a card reader. Is there anything I can do to make it see the card?

    I've used both a Griffin expresscard34 5 in 1 reader (mine) and a USB SanDisk Mobile Mate SD+ (a friend's). I'm using the adapter that came with my microSD card to make it fit in a normal SD slot. When I put it in it doesn't see it at all, not in Disk Utility, not System Profiler. My Griffin reader shows up in System Profiler though. But if I let it sit in my computer for a while(5 min) sometimes it gives me a message that the disk I inserted is not supported, then it shows up in Disk Utility. It says that it's unformatted, I've tried to format it, repair it, erase it, nothing works. When I try to format it, I get an error saying it failed because of an input/output error. I know that the microSD card itself is fine, because my friend's reader has a microSD slot and it works when I use it. I just want my reader to work because i spent $30 plus shipping. so any help would be great.

  • Won't read the SD Card after going in for repairs

    HELP - my 8520 curve won't read it's SD card? i know it's definately not the card as my wife just got a new BB also and it came with a brand new card that can't be read either. Thought i could live with it............ but can't. You can't have any music, video content etc............  My first blackberry died in a pint of guiness (don't ask), i took the sd card out before the insurance claim and had my fingers crossed that it would have survived the black death, but when my new replacement BB came it couldn't read the card.......... which i thought was down to the black stuff - initially.
    However since then i've tried different cards leaving me to believe i may still have the data on the original and that the phone or card reader is cream-crackered? any clues?........ thanks in advance.

    I've read on some forums this could be a card formatting issue, anyone got any thoughts on that?

  • MacBook Pro won't read Sandisk SDHC cards since Lion 10.7.1 update

    Hi all, just wondering if anyone else has had this problem. I know there are dozens of posts about SD cards not working with MacBook pros, but mine seems to have started when I installed the latest Lion update.
    I have a high-end 13" early 2011 MBP and the cards I'm having trouble with are all Sandisk 4GB SDHC. Two are 'Extreme III's" and one is an Extreme II. The card reader is showing up in System Profiler, and a really old 2GB Sandisk card gets read fine, so there doesn't seem to be anything wrong with the MBP hardware.
    Similarly, I can read the cards fine via a USB adapter, so it's not the cards that are causing the problem.
    I had successfully imported photos from the cards before upgrading to Lion, and also before installing the 10.7.1 update. So, it looks like the problem may be linked with the update, but this is purely an educated guess.
    I've tried resetting the SMC to no avail.
    Has anyone else experienced something like this?

    I've got the same problem. I've got a late 2010 MacBook Pro unibody running Mac OS 10.7.1 on it. I installed the 10.7.1 updated most likely on 8/17/11 the day after it was released by Apple. Since then I was able to read SDHC cards as I shot a number of photos and videos to my cards and they worked fine.
    I'm not sure what has changed since then, it wasn't as simple as the 10.7.1 update then it didn't work. This is the problem I'm having below, just started to experience this on 9/2/11. I tested with two 32GB SDHC cards, one 16GB SDHC card and one 2GB SD card. All cards were manufactured by Transcend.
    FAIL:
    * SDHC cards (16GB and 32GB) will not mount and isn't recognized by the MBP via the built-in SD card slot
    * SDHC cards (16GB and 32GB) will not mount and isn't recognized by the MBP via SanDisk 2.0 card reader connected via a short USB cable.
    * If I put any SDHC card into a SanDisk USB 2.0 reader that is connected to my USB hub (I gave it a try in case there was a power problem with the MBP USB system) the card is not recognized either.
    * Even Disk Utility will not see the card when inserted via built-in card slot or a reader.
    SUCCESS:
    * SD cards (2GB) mount fine when inserted either in the built-in SD card slot or via my SanDisk USB 2.0 reader.
    * If I leave the SDHC card in my camera (Canon 60D) and connect the camera to my MBP via USB I can import the images via Aperture.
    * If I put the SDHC card into the memory card slot reader of my HP inkjet printer (it has multiple card slots for different types) the card will mount normally like it is supposed to via the two failed methods above.
    I'm also sending this info to Apple but wanted to post here since there are three inconvenient work-arounds.

  • MacBook Pro won't read the sdxc card from Panasonic GH2

    I've got a MacBook Pro running 10.5.8. Just took my first pictures/video with the GH2 using a Lexar 64GB SDXC card. When plugging in the USB cable that came witht the camera I got - "The disk you inserted was not recognized by this computer". Does anyone out there have the GH2 that has experienced this problem? Solution? I've written to Lexar but so far they've been no help. I know the file system for this card is FAT32 which is a PC format.  I know this card will work with the Mac...but how is it accomplished?

    Your easiest & cheapest way to transfer the camera pictures is to buy (about $10 - $20) a USB memory card reader. Just plug your camera's memory card into it & copy the pic files to your Mac. Quicker & easier than interfacing the camera for pic transfer.
     Cheers, Tom

  • Computer won't read my SD cards

    I am trying to upload pictures and videos from my SD Card and also from a PRO Duo SD Card, and my computer doesn't seem to be reading them.  I have done this before without any issues.  Please help, these are wedding photos and the bride and groom are counting on me. 
    This question was solved.
    View Solution.

    Some of the new SD cards are not playing well with older hardware.  since no mention of model number for the computer, I would suggest getting a new card reader (USB driven) that can read the newer SD card format.  The easiest method,  you could connect the camera with the supplied USB cable, that way the camera becomes the card reader.
    {---------- Please click the "Thumbs Up" to say thanks for helping.
    Please click "Accept As Solution" if my help has solved your problem. ----------}
    This is a user supported forum. I am a volunteer and I do not work for HP.

  • My macbook won't read my sd card.

    My sd card has worked in my computer before, but today it decided not to work. I've tried reformating it on my camera, inserting the sd card into the slot faster than usual, but my computer acts like nothing is going on. Help?
    ~Stephanie

    Remove sd card and insert and remove it multiple times from the card slot.... also try cleaning the contacts.... See what happens it worked for me... Hope this helps...

  • My Whatsapp won't read my memory card and won't show my chat history

    My whatsapp won't show chat history and when I send texts, it doesn't show anything on my chats tab, it stays stuck on the "Welcome!" And when I go to Media Settings I see > sqlite error (setDirty Batch):net.rim.device.api.database.DatabaseException:database is null or closed.(-1)
    Please help.

    Hello Warren
    Welcome to http://supportforums.blackberry.com/
    Try within the WhatsApp application, and in the menu, under Settings, disable theMessage History. After connecting the phone or PC, meteos on the card and on the"Databases" folder and delete the "WhatsApp" off and enter the application againconfiguration folder and activate the recorded history in the memory card .
    Regards.
    BBM Channels  PIN: C0007093A
    Do not forget to give LIKE    Those people who help you and advise you about your doubts.  if the review has been SOLVED** # 4LL  #ÉliteRoad  Make a backup of your BlackBerry
    BlackBerry Protect and  BlackBerry Link constantly.  #ichooseBlackBerry10 Gutijose14 Forums Veteran I

  • My LG Cosmo Touch won't read my SD card for my pictures

    It reads my music but not my pictures i have tried to turn it off and then on and its still doesn't read my pictures on my SD Card can anyone help me please?

    KagomeAngel, pictures are definitely important and I will do my best to guide you in the right direction.  I have some questions to get started. First, are you using the SD card from a different phone you previously had activated? Were the pictures save on the previous phone to the SD card? If you are using an SD card from a different phone, you may need to format the card for the new phone, however the procedure will erase all data on the card.  It is recommended to have backup of  your data to transfer back to the phone. I have listed the steps below to save the pics to your SD card and info to format the new phone. 
    Steps to save pics SD card 
    From the main screen, touch Menu.
    Touch Media Center.
    Touch Picture.
    Touch My Pictures.
    Touch the Options menu.
    Touch Move.
    Touch a picture(s) then touch MOVE.
    Touch an option.
    To Card
    To Phone
    Touch Yes.
    Steps to format your SD card
    From the main screen, touch Menu.
    Touch Settings.
    Touch Memory.
    Touch Card Memory.
    Touch Format.
    Enter the Phone Lock Code (default is the last 4 digits of the phone number).
    Touch Yes. 

  • Won'r read new sd card

    new phone new card.  start up screen says preparing sd card.  go to settings sd card and mount and format sd card is grayed out.  take picture and it says to insert sd card????  removed and reinstalled and rebooted several times no luck?

    I havent been able to get the Format option to show under Settings > SD Card & Phone Storage but you can remove the card from the phone and place in PC and format FAT32 and see if the device reads it once placed back in phone.

  • MBP won't read burned DVDs after Mountain Lion upgrade

    Well, I think this is the last Macintosh I'll be owning. I've really had it. And now with the decision to cancel the 17" laptop, what's my inscentive to stick around?
    OK, rant over. I recently upgraded to Mountain Lion. All went fine, however, I did not notice until today that the machine will no longer read my previously-burned DVDs. The machine thinks they are blank DVDs! Interesting that I can insert a movie DVD and it reads/plays fine.
    Has anyine else had this problem? Is there a solution?
    Thanks-

    What version is Pages? If you have at least Pages 4.0.5, try deleting the preference file. Go to HD > Users > (your account) > Library > Preferences, delete the com.apple.iwork.pages.plist file & then restart Pages. In Finder, hold down the Option key while clicking on the Go menu & your user Library will appear about halfway down the list.
    If you're version of Pages is older, try updating.

  • 2012 MBP won't read My passport

    Hi there!
    My new (mid 2012) macbook pro doesn't show my My Passport HDD in finder/diskutilty and even in the western digital disk utility. I have tested the My Passport HDD on my imac and my old macbook pro, and it works great.
    At first i thought the USB ports were dead, but my mouse, keyboard and 2 usb sticks work.
    Please help me out! I need the HDD because i travel allot, and i work on different computers.
    Thank's in Advance!
    Kevin Boonekamp
    Qck Design

    Many "name-brand" USB external drives that lack their own power supply do not get enough power from the computer's USB bus to turn the motor and the electronics. If you don't want to replace the Passport with a drive that has an independent power supply, you can try these items:
    1) A number of people have reported that reformatting the external drive to Mac HFS+ (Journaled) using Disk Utility takes care of what seems to be a low-power problem.
    2) Get a powered USB hub to go between the computer and the drive. This type of hub has an independent power supply.
    3) Get a "Y" cable like this:
    1 Meter USB 2.0 A to 5 Pin Mini B Cable - Auxiliary USB "Y" Power Design for external hard drives.
    It plugs into two USB ports on the computer to drive more power to the external.
    If you want a drive that is truly Mac-compatible, look at those offered by OWC:
    http://eshop.macsales.com/shop/firewire/

  • Hp pavilion dv4-1123us Media Card won't read

    I have a hp Pavilion dv4-1123us laptop that won't read a 16 GB SDHC media card. The card works in my PC, so the card is good. I have a Scandisk 5-1 media reader hooked to my home PC that would not read it but I found through Scandisk site I needed to download the latest Firmware which I did and now the card works on my PC. The reader has always and still does read a 512 MB and a 2 GB XD cards on my laptop. I am running XP Pro OS.
    I have searched the HP site for driver downloads but only see them for Windows 7 and 8 not XP.
    Can someone help me on this?

    Hello wgray826,
    You’re having a problem not being able to read a 16GB SDHC card.
    I think that your computer does not support the SDHC card.
    Here is a link to your user guide and what cards it supports.
    I noticed that it shows the Secure Digital but not the Secure Digital High Capacity.
    Clicking the White Kudos star on the left is a way to say Thanks!
    Let me know how everything goes.
    Have a good day.

Maybe you are looking for

  • MBP FREEZES AFTER 10.4.6 UPDATE WITH WINDOWS PARTITION

    Just updated software to 10.4.6, and rebooted the computer unattended. It booted on the Windows partition, and worked fine. Just rebooted in Mac mode, and everything froze. Had to reinstall the OS, from the original DVD. Did anyone experience the sam

  • Jpegs display grossly oversaturated in LR3 but not LR2 on my intel iMac

    I have Lightroom 2.6 running on my desktop and laptop machines and have no color issues. Ever since the beta of Lightroom 3 I have a color problem with jpegs on my iMac only. Jpegs, even those exported from Lightroom 3 from RAW files, are grossly ove

  • How to extract data from OMElement object file attachment SOAP Service

    We are having Axis2 Tomcat6 Webservice on SOAP WSDL The Webservice method is like this public String uploadGpxFile(OMElement omEle) throws AxisFault {     // Extract file attachment from omEle    // store in database    return "ok"; So, I just went t

  • Re: Unable to place order with new credit card.

    I'm having a similiar situation with my new Best Buy credit card. I was approved today (7/24/2015) and wanted to use it for an online purchase at bestbuy.com. After the congratualtions message from citibank, I tried too register numerous times using

  • Missing Data after extraction

    Hi, I have a generic datasource in R3, delivering some 20 plus fields. When I check in RSA3, I get all data, for full extraction or even selective extraction. I have replicated and activated the DS in BW. Now when I extract the data in BW for a singl