MBP won't sleep when I shut the cover.

New behavior. ?

Since I have never used your computer, I have no idea if the condition is "new behavior."
Apple Portables: Resetting the System Management Controller (SMC)

Similar Messages

  • Macbook Pro 13" will not sleep when I shut the lid

    Hello Community,
    This is my first time using the forum. I have a macbook pro 13" 2009 model. Recently I had my MBP connected to an external monitor. I shut the lid while it was connected to the monitor and forgot to turn off my bluetooth mouse. Later that night the mouse was bumped, waking my macbook and setting it to clamshell mode. I put it to sleep again, opened the lid and woke it, but the LCD on the laptop did not turn on. I reset the PRAM and the NVRAM with no luck. I disconnected the monitor, rested the P/NVRAM and it would boot with the laptop screen and once everything was loaded my screen went black and then went to sleep on its own. I tried powering on and off using the P/NVRAM key commands...and nothing. So I opened the bottom case and physically disconnect the battery, reconnected the battery, put the bottom plate back on and powered it up. The screen began working again, now I have a new problem, the MBP WILL NOT sleep when I shut the lid anymore. I even reinstalled the OS and still no luck? If anyone has anything helpful that I could try to get this feature working again it would be much appreciated. If there is some terminal command I could try or some other troubleshooting method. I even put a magnet by the right side of the keyboard to try to trigger the sleep switch.
    Any advice would be appreciated.

    I resolved my issue in a very unlikely way. In my earlier post I mentioned that I wiped my hard drive and was starting from scratch. Well I reinstalled windows 7 through bootcamp and it fixed my sleep issue. That's right folks...Windows fixed my mac. I think that it was an EFI issue. I think this because windows 7 uses EFI and during installation it must have reset the sleep values to normal. I feel when you reinstall Mac OSX the EFI partition on the drive should get wiped and reinstalled as well. I also feel that apple should have an option within System Prefs for the user to select what the way is that the computer responds when the lid is shut instead of the ritual of trickery and problems that the clamshell mode can cause.
    Hope this helps someone.

  • Won't sleep when I close the lid - HELP!

    A while ago, my iBook G4 1GHz was knocked off of a table. The display was smashed and the whole display assembly was destroyed. I bought a new (used) display assembly and installed it. Worked fine, but when I closed the lid, the iBook woudn't sleep. I checked the placement of the magnet in the top case and I reset the PMU. Still no sleep. So I contacted the company that sold me the display and got a different one. Still won't sleep when I close the lid. I checked all of the energy settings, reset the PMU and even tried to force sleep with a magnet from another broken iBook. Still no sleep when I close the lid. It will sleep when I choose sleep from the Apple menu (OS Tiger) and when it sits for a while with the lid open, but not when I close the lid. Any thoughts?

    My original problem has not been solved. The iBook still won't go to sleep when I close the lid. I have checked out any possible software causes, and have ruled them out. I have checked to make sure no keys were being pressed when I closed the lid. I took a magnet from another iBook top case and ran it down the side of the display to try to force sleep. No effect. I don't have any Firewire or USB devices attached, to that's not it. Apple, this board, PBFixit.com, and my local Apple-affiliated repair center have no idea why I am having this problem. Two display assemblies have experienced this problem. The original display had been destroyed in a drop. Could some internal damage, like maybe to the logic board, result in such a problem? It's odd that I am the only person out there who has had this problem. Weird, to be sure.

  • Macbook Pro won't sleep when lid shuts or hit sleep

    Hey Everyone,
    So after the latest update my Macbook pro no longer immediately sleeps after shutting the lid. It also won't sleep when 'sleep' is hit in the apple menu. It's actually really annoying as I need it for security.
    Does anyone know how to fix this problem?

    Try Reset SMC.  http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

  • MBP won't sleep when charging

    My 15" i5 MacBook Pro won't sleep when charging; a reset of the SMC solves the problem temporarily, but it always recurs. Interestingly, the sleep indicator light pulses as if the machine is sleeping, but I can clearly hear hard drive activity; the drive sounds like it keeps spinning up every 10 seconds or so. This is not an issue when trying to sleep when running on the battery only. Any advice?

    I would just buy a wall charger for the touch and leave your MBP alone. If you really only wanted to charge it from the MBP, just make sure it doesn't sleep when plugged into the power adapter.

  • MBP Won't sleep when the screen/lid closes...

    I have had my MBP for almost a year now and my AppleCare is about to expire...
    Recently when I close the screen the computer will continue to run and operate as if it was never closed and will not sleep. I took it to the Apple store and they did an SMC reset which sorta helped for about 5 hours. Now it goes to sleep but will take almost a minute at times or won't sleep at all. I was told I would have to send my computer out for a couple weeks but I can't do without a computer. Please help me fix this or help me convince Apple to give me a new computer.

    Run /Utilities/Console and click 'All Messages' top left then close the lid and try and put it to sleep.
    If no dice open the lid and look at the Console messages - in particular look for lines including "sleepimage" and see what it says ?
    I suspect there's not enough space left on your hard drive, or it badly fragmented, and the RAM sleep image can't be created or stored properly ...

  • MBP won't sleep when shutting lid

    For about a week now, my Macbook Pro won't go to sleep when I close it.--It stays running, and gets hot.
    However, using the power button to put it to sleep or choosing sleep from the Apple menu works fine.
    Any suggestions?

    This issue has been covered extensively in Macfixit.
    I would make sure though that you aren't running any applications in the background or have any third party peripherals connected when you close the lid. Make sure also the Energy Saver System Preferences Options has Wake from Sleep for administrative access unchecked. It is found in your Apple menu -> System Preferences.
    If you find that you aren't able to stop it from happening, make sure your firmware version gets up to date, and your hardware test tests fine:
    http://docs.info.apple.com/article.html?artnum=303880
    http://docs.info.apple.com/article.html?artnum=303081
    Regardless of the Hardware Test results, call AppleCare:
    http://www.apple.com/contact/phone_contacts.html

  • MBP won't sleep when closing lid

    Since I did the 10.6.2 update, when I close the lid on my MBP and that the power is connected it won't go to sleep, my "apple" is still bright with the lid closed.

    HI,
    Try resetting the SMC.
    http://support.apple.com/kb/HT1411
    If that doesn't help, try resetting the PRAM / NVRAM.
    http://support.apple.com/kb/HT1379
    Carolyn

  • MBP won't sleep when closed?

    Hey Guys,
    I'm not sure what's up (as I didn't have this problem with 10.4.7) but ever since I updated to 4.8, when I close the lid on my MBP, the front light won't pulse at all.
    I can here the HD and stuff still spinning etc.
    If I have iTunes playing, it continues to play when closed (and it never did with 4.7)
    I checked that spotlight isn't indexing. I close all my programs and still it wont sleep.
    When I put it in its case to go to school, its really warm (since it's been on) and my battery life is dying because of it.
    I don't know what's up with it, or what I can do to fix it? I checked the energysaver settings and they're all right. I've tried resetting PMU and repairing permissions aswell.
    Any ideas/suggestions?
    Thanks in advanced.

    See this thread for complete information on the files to delete. That fix is temporary. The recent firmware update for the MBP fixed the problem permanently (so far) for me, but not for others apparently.
    MBP, MB, PMac G5, a few Linuxes   Mac OS X (10.4.8)  

  • Computer won't sleep when lid shut and battery icon not showing and not charging

    hello, I've just come back from holiday and went to turn on my mac air that was sitting at home, and it was flat so i put it on the charge and today i see that the light was still orange and then i notice that there is no battery icon and when I'm at the password stage to log into my account there is a black cross over the battery icon and then once logged on it disappears. And also when the lid is shut, nothing happens the light stays on the apple logo and the laptop doesn't sleep. also the lights for the key board aren't turning on, please help

         Reset SMC.     http://support.apple.com/kb/HT3964
       Choose the method for:
       "Resetting SMC on portables with a battery you should not remove on your own".

  • My macbook pro won't go to sleep when I close the cover

    Does anyone have a fix for this problem?

    http://support.apple.com/kb/HT1411 Apple Portables: Resetting the System Management Controller (SMC)

  • Mac won't sleep when shut

    Hey, I just noticed today that my computer is no longer going to sleep when I shut the screen, so the Apple light stays on and presumably power is still being used. When I open it up, the screen is right where I left it, already on, not waking up from a black screen. Is this a magnet problem or a setting issue? Is it resolvable?? Thanks!

    I'm guessing from the lack of replies that this is a problem best solved with a trek to the Genius Bar....ah well.

  • MBB Does Not Sleep When Lid Shut

    My macbook does not sleep when I shut the lid. This happened recently after I had my fan repaired. I also updated the OS at the same time, so I'm not sure which triggered the problem.
    I would have to manually select sleep before shutting the lid; and I would have to press the space bar after I've opened the lid to wake it.
    The following thread applies to a MBP. Apparently my problem might be a faulty latch.
    http://discussions.apple.com/thread.jspa?messageID=5325605&tstart=0
    I've reseted my PRAM, but that didn't work. My machine has been in for repairs 4 times (Fan, Logic Board, and the top case has been replaced twice due to cracks).
    I'm wondering if I should send it back to the service centre to have it looked at. Apparently, if this is not a hardware problem, it won't be covered under AppleCare, and I would be charge. So just want to make sure...

    I tried doing this fix using the guide on http://ifixit.com to dismantle my MacBook and find the battery/lid detector cable which indeed seemed loose at its connector just next to the headphone jack, but when I reassembled the mac still does not detect lid closing and now it doesn't even detect the battery anymore! Yikes! Looks like a trip to the apple store is required anyway.

  • MacBook Pro won't sleep when lid is closed and battery lights won't work?

    I have a 2010 MacBook Pro 15" and ever since I got it, the battery indicator lights wouldn't light up (not that big of a deal) and the computer wouldn't sleep when I closed the lid.
    I've reset the NVRAM/PRAM, the SMC and verified/repaired my hard disk as needed.  But the computer still won't sleep when I close the lid (regardless if the machine is plugged into a charger or not).  Is there a known fix for this problem?  I've been searching through the forums and troubleshooting from advice that other people have suggested, but nothing seems to be working.  Any help is greatly appreciated!

    This exact thing happened to me. Resetting the SMC solved all my problems. Here's a link to how to do it: Intel-based Macs: Resetting the System Management Controller (SMC) Hope it works!

  • MBP won't sleep and battery drains quickly since 10.6.3 update, help!

    My 15" MBP refuses to sleep when I close the lid, it's very frustrating cause now I cant just close the lid when I'm done using it cause the battery runs down and it gets very hot. This is only since the 10.6.3 update, I've tried repairing the permissions but no luck, even when I choose 'Sleep' from the Apple pref menu it still doesn't sleep.
    Any idea's?
    Along with this and the screen flickering issue plus a few other bugs I'm really starting to wonder how I justified paying £2k+ for this machine

    Nope, reset the SMC.
    When I try put it to sleep it wakes up 15seconds on the button every time. When I close the lid to put it to sleep the apple logo on the lid lights up every 15 seconds aswell.

Maybe you are looking for

  • Error loading a text file during creation of data load rule

    Hi, I am trying to load this text file but whenever I open File -> Open Data File and then click on the file, it says "Invalid Blank Character in name". I tried changing the name of the file and everything but I do not understand what it really means

  • Does the 1st generation ipod Shuffle work with the new iTunes?

    I was just trying to sync my old iPod shuffle with iTunes 11 and it won't work. Any help?

  • Installing Design and Web Prem on a different computer?

    About a year and a half ago I bought the Design and Web Prem from Adobe for my MAC. I remember hearing you can un-install it from one computer and re-install it on another if you don't want to use it on the first anymore. I could have sworn I did thi

  • Help abap coding

    Dear all,i've an internal table full of datas. i need to filter the data out according to a criteria. if a storage location having both normal and consignment stock,den i wl need to display out this data. pls give some idea how to do this .am totally

  • Why doesn't full screen video option work in Captivate 8?

    Hi, I have added videos to my Captivate project and have placed the Corona 2 skin on top. When previewing or publishing there is a full screen icon button which can be clicked to make the video full screen. This is not working. When I clink on it, no