MBP won't turn on or charge, working fine last night

I've got a 2009 MBP that has been working totally fine, I was using it last night and all was well. I closed the lid, went to bed, then came out this morning to a computer that wouldn't turn on. No light on the charging cable, no response from the power button, nothing. I then plugged my MBP into another charger from my wife's MBP-- nothing. Any help would be very much appreciated!

If you push the little battery test button on the side of the computer (About the battery indicator lights on MacBook...), what does it show you?
You can try Resetting the System Management Controller,  but you will most likely have to take the machine in to a service place for testing/repair.

Similar Messages

  • IPad won't turn on...worked fine last night.

    iPad is blank and not turning on. Tried resetting pushing g home and sleep button

    Try a reset a few more times. Make sure you see the Apple Logo.
    Hold the Sleep and Home button down for about 10 second until you see the Apple logo.

  • My IPad2 has a black screen and won't turn on. It worked perfectly last night and has no response this morning.

    My IPad2 has a black screen and won't turn on. It worked perfectly last night and it is completely black this morning. It is fully charged.

    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Home button not working or unresponsive, fix
    http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
    Fixing an iPad Home Button
    http://tinyurl.com/om6rd6u
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • This morning, my macbook pro won't turn on even though the battery is charged and power cord is working. it worked fine last night. what can i do?

    This morning, my macbook pro laptop won't turn on even though the battery is charged and power cord is working. it worked fine last night. what can i do?

    Try the suggestions in this support article:
    http://support.apple.com/kb/TS1367
    Ciao.

  • My ipad2 was working fine last night, but this morning is unable to connect to ANY wifi networks (though it can detect them).  All typical solutions fail.  What can i do?

    My ipad2 was working fine last night, but this morning when I woke it up... it no longer was connected to my network.  While it can detect networks, it cannot connect to any (have tried at home and at work).  I have tried: resetting router, resetting ipad, forgetting network, renewing lease on network, ensuring airplane mode is off, resetting network settings, turning wifi on/off.  None of the typical solutions I can find online seem to work.  HELP!

    You've gone through all of the basics. You might look at this document regarding potential issues with wi-fi environments. 
    http://support.apple.com/kb/HT4199
    If none of that works, and if a device restore doesn't work, it's time for a trip to the Genius Bar. 

  • HT1926 i had itunes on my pc for a number of years. worked fine last night even. today, nothing, screen gave error 7, windows error 126, tried removing and re-installing, still same message. says I am missing MSVCR80.dll

    I have had Itunes on my pc for years. Worked fine last night. Today it gave me a message missing MSVCR80.dll, tried reinstalling, didn't work. Removed Itunes completely, reinstalled. Didn't work. Same message. Any fix ideas?

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99196)

  • "Unable to find PPoE server" - worked fine last night!

    *The set up:*
    Belkin ADSL modem (with ethernet jack)
    TC 500gb
    MacBook Air
    I have the Belkin ADSL modem (not a router) connected to the Time Capsule using an ethernet cable. When I set up the modem, I used a web based interface to enter the username/password settings for my connection. The modem connected ok, and works fine.
    During the Time Capsule set up procedure, I was asked how I wanted to connect to the internet. I was given the option of Ethernet, or PPoE.
    Assuming Ethernet was the correct option to use, I selected this. However, an error message was received telling me that the amber light would not stop blinking until this was resolved.
    I therefore changed the setting to the only other one available, which was PPoE. On the next screen, I was asked to enter my username/password for my internet connection, which I did.
    This was successful, the light went green, and I could access the internet.
    That was last night.
    *The problem:*
    This morning, I decided to change the name from "Chris's Time Capsule" to just "Time Capsule". After clicking update settings, I am now receiving the message about the amber blinking light again. I am told this issue needs to be resolved, and I can no longer access the internet.
    So I have tried chosen Ethernet from the menu again, however this does not work. Choosing PPoE no longer works now either.
    I'm confused why the device has suddenly decided to not work, despite working fine last night with exactly the same settings. Also, all I changed was the name of the device- I'm suprised this has resulted in the Time Capsule not working anymore.
    Can anyone perhaps suggest a solution?
    Thanks in advance!
    -Chris

    Hi Uma,
    Open your SAP MMC and from menu option select file->add/remove snapin...
    Click on add button and then select "SAP Systems manager".
    Click next on the next screen and then specify System ID, Instance (as hostname instanceNumber) and then click on add button.
    It will add this system in the list in sapmmc.
    Regards,
    Bhavik

  • My charter email account was working fine last night and now today my mac book pro keeps requesting the password and when I enter it, it still cannot receive mail?

    Fairly new to mac, and today my charter email account keeps asking me for password which was working fine last night when I went to bed. Now today it states that it is not the correct password and I cannot get my mail? What should I do here?
    Thank you

    Hello zeern2003
    Start with the article below to troubleshoot issues with Mail sending and receiving email. You may not have to do every step, but pay attention to what is relevant. Start with using Connection Doctor to bring up a window that will tell you what could be the issue.     
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/TS3276
    Regards,
    -Norm G.

  • I can't get my trackpad on my MacBook to click. It was working fine last night.

    I'm not sure if its the battery expanding (but since it was fine last night), it could be the battery expanding.
    Apple representatives told me that the battery expands to let us know the battery needs to be replaced and when it expands the enlarged battery  won't allow the trackpad to click, when your pressing it. 
    Clicks also won't happen when the area under the trackpad  gets dirty. 
    Does anyone know if there is a way to check to see if the battery is good without taking the MacBook apart?  Also, there is no error Exclamation Point, on the top right of the screen. That happened to my MacBook Pro, as well as an inability to click the trackpad.
    Any advice is greatly appreciated, Sean

    KaneoheSean wrote:
    Apple representatives told me that the battery expands to let us know the battery needs to be replaced and when it expands the enlarged battery  won't allow the trackpad to click, when your pressing it. 
    That's just not correct. Swelling in the battery is caused by overheating of one or more cells in the battery, followed an exothermic chemical reaction of the anode (usually lithium cobalt oxide). It can cause simple swelling or even complete failure in the battery (including fire). It is NOT something by design to tell us that the battery needs to be replaced. It is a runaway thermal process in the battery.
    Minor swelling might be ignored with no further issue. When in doubt, have the battery checked by Apple or an authorised repair centre.

  • ICloud won't sync to my iPad. Worked fine last night!?

    My iCloud works fine on my iPhone5, but it won't sync with my iPad. It started last night. I have followed the instructions on the support site, deleted and reinstalled several times and nothing. Argh! Any advice?? I have an important email hanging in the outbox. Thanks!!! :)

    Is this how you sync them back to iPad? (Tap to enlarge image)

  • My MacBook trackpad stopped working randomly today but I didn't do anything to damage it. I just upgraded to Snow Leopard 10.6.8 last night, but it worked fine last night. What is happening?

    Hi,
    So I have a late 2006 1.83 ghz Intel Core 2 Duo MacBook A1185. And last night I upgraded my software to Mac OS X Snow Leopard 10.6.8. And then this morning when I went to start doing work on it, my trackpad wouldn't allow me to click on anything. It would only scroll my little mouse icon around, so pretty much making my trackpad useless:/ So then I kind of had a panic attack and rebooted at least 10 times (no joke), and then remembered I had a external mouse I could use to plug in. So I plugged that in, and it worked fine as long as I didn't touch the trackpad at all. And then I got annoyed of that because it started to hurt my wrist, so I took out my battery(6 month old 3rd party battery), and then my trackpad started to work? I was slightly aggravated, and confused. So then I put the battery back in, and it stopped working again. So I am puzzled if it is just I need a better battery? Or to replace my trackpad and keyboard? Any advice would be greatly appreciated, so thank you in advance:)
    Thanks

    Ok, that's what I have done... I have Snow Leopard Installed, 10.8.6 and it's got Boot Camp 3.0.4... my questionis the Mac Windows Install Drivers you add after installing Windows. Windows looks terribly awkward and I'm guessing it has something to do with the ATI graphics card sofware the mac disk installed. Is is ok to use the one I created years ago? I can't seem to find a place to create a new one using the 10.8.6 and 3.0.4.
    When I orignially installed Boot Camp you had to create a disk using Boot Camp that you installed in Windows after the initial OS installation.

  • My iPod isn't turning on nor is it flat because I've had it on charge for a few hours. My computer isn't picking it up and it worked fine last night.

    I've never had this problem before and it was fine a few hours ago!

    Try here:
    iOS: Not responding or does not turn on

  • Tried charging my 2009 MacBook Pro but the green light won't turn on and now my computer won't turn on (it was working right before I attempted to charge it!) what do I do????? Even tried using another charger I had for it and nothing! Help

    Tried charging my 2009 MacBook Pro but the green light won't turn on and now my computer won't turn on (it was working right before I attempted to charge it!) what do I do????? Even tried using another charger I had for it and nothing. No green light. Computer turn on. Now what??? Help!

    QUOTE: "No green light. Computer turn on."
    What? so were you able to turn on the computer with the new plug? does it give you any other light? amber/orange light?

  • I turned my ipod off, and it won't turn back on. charging doesn't work and it won't be recognised by wi-fi or usb connections. How do i fix it?

    i turned my ipod off, and it won't turn back on. charging doesn't work and it won't be recognised by wi-fi or usb connections. how do i fix it?

    Check your cable whether it is good. If it is use the wall plug to charge at least half an hour. See how it goes.

  • Any idea why a 3 month old new IPad won't turn on?  It has been charged today and was working perfectly last night while I used it to read a book.  I have tried both the sleep/wake button and the on/off button on the front.  Nothing is happening.

    Any idea why a 3 month old Ipad will not turn on?  It has been charged and I haved tried the sleep/mute button and the on/off button on the front.  Nothing is
    happening.  It was working fine last nigh?

    1. Hold both the Sleep/Wake and Home button down together
    2. For 10 to 15 seconds
    3. Until you see the Apple logo
    4. Ignore the red slider
    Note: Repeat it if it doesn't work the first time

Maybe you are looking for

  • Frame timeout error using Configure Trigger3.vi

    Hi all, I'm triggering the frame capture of an .avi with an RTSI connection.  However, I keep getting a frame timeout error when I use the IMAQ Configure Trigger3.vi.  I don't get any timeout errors when I just use the IMAQ Generate Pulse3.vi but I a

  • WebCore plugin crashes Apple programs

    I installed the latest updates from the App store last night.  This morning Safari, Mail, iTunes and my RSS reader all crash with the message "quit unexpectedly while using the WebCore plugin".  Chrome is working with no problem.  I was able to acces

  • 2lis_02_itm data extraction problem

    Hi, I activated 2lis_02_itm in ecc6 and run the rsa3 tcod, but it is showing 0 record. is there any way to confirm the records or how to fix that problem, any diag. steps. Please help me. Thanks

  • Host name on SSL certificate did not match the alias name in the URL addres

    To the XI gurus, One of our vendors had problem to send us xml invoices because the url address had our server alias name and the SSL certificate we asked them to install had the server name. To resolve this issue, can we install two certificates (on

  • Help on VMS-communication and prerequisite

    HI, we're in the middle of waiting for the Cisco VMS 2.3 and i have a few concerns: 1) VMS has SSH sessions to all the devices being managed. Does these session stay up permanently or only when needed. 2) From what i know VMS comes with Ciscoworks co