MBPR wifi issues after latest update to 10.9.2

Hi all,
After the latest update to 10.9.2 my Macbook Pro Retina (1st gen) seems to be having issues re-connecting to wi-fi after I wake it up from sleep. Although I've read stories about wifi-issues with the retina line in general, I've been lucky enough to have mine run pretty smoothly so far. That is until the latest update ... for some reason, this happens EVERY time i close and open my laptop.
And yes, it's a easy fix. Usually all i need to do is to turn off wifi and turn it on. But it's getting slightly annoying having to do that every time.
Has anyone else had this issue? and are there by any chances a solution for this problem?
Appreciate the help!
All the best
Farid

Hello thegreatbeard,
Thank you for the details of the issue you are experiencing with Wi-Fi on your MacBook Pro.  I would be concerned about this too.
I recommend following the steps in the section labeled, "Symptom: The network connection drops unexpectedly" in the article below to resolve an issue like the one you described:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Thank you for posting in the Apple Support Community.
Best,
Sheila M.

Similar Messages

  • Open GL issue after latest updates: Missing GL version

    Having issues with OpenGL after latest updates to OSX and Safari. iTunes will not display cover art and Angry Birds responds glewInit failed: Missing GL version. The is a Mac Pro with 10.7.4 and Safari 5.1.7.
    Anyelse seen this? How is this fixed?

    Final chapter in this saga for anyone else who experiences this.......run reparPermissions against your disks prior to upgrading. After having to rebuild the boot disk a couple of times and upgrade, had no problems with 10.7.4 but would always get Missing GL Version after Safari update. Ran DiskUtil and repaired permissions prior to Safari update and finally got it to pdate without causing GL issue.
    Still working on how to not need to delete my previous backups when rebuilding machine (apparently TimeMachine always tries to create a new back sparse folder and thus may waste original space from your previous backups).
    Thanks to A Brody for the suggestion about repairing disk permissions!
    Edward

  • MAJOR Wireless, Safari, Dock & Finder issues after latest updates

    I'm having major issues after the latest AirPort, Security Fix and Safari updates in 10.5.2: Safari keeps crashing every hour, Wireless connections time out and Airport occasionally crashes when I try to turn it off/on. Sometimes the systems gets stalled and has lag - I'm not sure if Safari crashing is causing this or it's the system that causes Safari to freeze and crash - often the dock becomes unresponsive too and makes me force shutdown and reboot. I've had to reboot like this more than 4 times today, something isn't right. My questions, therefore:
    1) Is there a way to restore my Mac to the state BEFORE the latest upgrades?
    2) I can't recall the exact names and versions of the updates, is there a way to access the update log files, so that I can take notes on what actually was updated and when?
    3) Is there any other way to access log files that may have more information on the crashes that I've had lately?
    Thanks in advance!

    Hi Reinis,
    In this situation, the first thing I would do is log into a different user account (if you do not have one, create one) and then see if the symptoms persist with the new user account. To directly answer your questions:
    1) Is there a way to restore my Mac to the state BEFORE the latest upgrades?
    Archive and Install using the OS DVD or by using Time Machine if you have it enabled.
    2) I can't recall the exact names and versions of the updates, is there a way to access the update log files, so that I can take notes on what actually was updated and when?
    Fire up System Preferences, click on the Software Update icon and then select the Installed Updates tab.
    3) Is there any other way to access log files that may have more information on the crashes that I've had lately?
    Console, which is in your Applications/Utilities folder.
    Kryten

  • Trouble with 4G and other issues after latest update.

    To whom it may concern,
    After the recent update I have been having the following problems:
    I lose 4G in many places where I was receiving great 4G access before.
    Battery life seems to have suffered a little, this may be due to 4G hunting.
    New software applications were installed like the Caller ID app, and flipboard. I hate when software is installed without my authorization and then cannot be removed. What year do we live in Verizon?
    I have heard on this and other forums that a factory reset does not resolve these issues but Verizon claims that it is the final resolution. We should not have to do a factory reset after an update. I understand that there are many variables to consider with all the apps out there but that is what testing is for. That is why we wait for updates from Verizon.
    I will attempt a factory reset to resolve my issues. If this does not resolve the issues I will be contacting Verizon about a refund for the 4G access that I am now being denied.
    Thanks
    AlphaDanger

        Hey AlphaDanger!
    The year is 2013 and I read you loud and clear on wanting to make sure your software operates smoothly on your GS3. So, let's make that happen.
    Right off the bat, thank you for the details as well as considering a hard reset. But, I'd like to make another recommendation if you have yet to do it. Instead, I'd suggest wiping the cache partition. To do this:
    1.) Power off your phone.
    2.) Simultaneously hold the volume up key, home key, and power key.
    3.) When it vibrates, release only the power key.
    4.) When you see the Android recovery menu, wipe cache partition using the volume down toggle and power key to select.
    5.) Then select "Reboot System Now".
    Please let us know how this goes.
    EvanO_VZW
    Follow us on Twitter @VZWSupport

  • Airport Extreme (Dualband) Issues after latest update

    So after the semi-recent 7.4.1 upgrades, I am having a persistent issue where my computer will drops its connection to my Airport Extreme Dualband for no reason. Most commonly, it happens after I have left the computer sitting overnight. After I come back, the computer will be connected to no networks, despite my network showing up as available. The computer is not on the move, and there are no signal issues. I am not totally positive which machine is responsible (i.e. if the computer is dropping the connection, or if the router is), but I was hoping to here whether anyone else is experiencing the problem.

    Spent 8 hours last night with same issues. All issues really started after the update. I had just bought the new dual band, set up was smooth, then all **** broke loose after the X.1 update. A couple of things I noticed. 1) Same issues you had that if the computers sat, it took a good 5 minutes to get the network up again or "see" it 2) I use comcast and I have noticed that the dynamic is causing issues between the AE and modem (post update) 3) Every time I try to change settings on the AE to add Guest network, the whole network crashes and I have to go to complete hard boot, reset AE and do power start all the way out. 4) Comcast rep had me power cycle all of my hard wire gigabit routers off the AE. I was having issues until I did this. Apparently the AE keeps IP if you feed routers off of it. Going to revert to 7.4 right now.

  • Battery Life / Recharging issues after latest Update

    I bought the Xperia Z2 beginning of April and it was fine. The battery lasted for about 2 days with Active Hotspot continuously running for approx. 18 hours. After updating to the latest software version, the phone runs pretty hot and with Active Hotspot on, while hardly using other programs, the battery is empty after 8 hours, despite having the phone always on the charger. Several times an error message pops up, telling that the phone consumes more power, then the (original) charger is providing! Is that update rather a downgrade? Or is it the intention to get the Hotspot literally hot?

    Hi there!! I've been using my Xperia z for the past one year. Till last week I didn't had any problem but now I'm not sure what happened to my mobile.. I have listed all the issues below. I really need your help and support to solve this issue and please get me a permanent fix..
    1. Battery is draining too fast(very fast)
    2. Mobile is always hot even if I don't use. When start using apps like game, browsing or watch any video, I feel that I'm holding an induction stove in my hand.
    3. "Throw" option is not working
    4. When I make a call I don't hear anything through earpiece rather I'm using loudspeaker speaker.
    Plzzz help me and get me a solution.. I'm afraid to take my mobile to service center.. Please advise what needs to be done..

  • Music syncing issue after latest update

    I'm having issues syncing my music on my iPhone 4 after this latest security update. Some of the files seem to be "stuck" on the phone. They won't remove, others just won't play, I can't add anything to the phone. Etc. SOS!!!

    Have you tried re-installing the firmware through Nokia Suite? Remember to backup all your phone contents when prompted by Nokia Suite.

  • Sync issues after latest update.

    I went to sync my ipod today, it told me it needed to update so i let it, once that update was done i noticed that it had removed all of my music from my ipod, annoying but didnt matter because i was just going to leave it to sync all 3207 songs from my pc to the ipod. Clicked on sync on Itunes, and the bar at the bottom doesnt show any music. After telling it to sync all the music and temporarliy have the music show up in the bar bellow, it still failed to sync music. Getting increasingly annoyed about this as every update to IOS or Itunes mucks everything up

    Hello,
    I am currently an owner of an Ipod Touch 4th generation. I see you are having problems with your Ipod Touch, so I will try to find a solution to your problem.
    Hard Reset: Hold down the Sleep/Wake and Home buttons for at least 10sec. or until Apple logo appears
    Have the latest Version of Itunes
    Restart the Computer
    Any error messages appear?
    Hope that helps!
    If none of the above solutions work, can you please respond back ASAP as I will try to find another solution to your problem (This might even help others with the same problem!)
    Cheers!
    Pizza98704

  • Nokia Lumia 920 issues after latest update. Fix in...

    Since the last update we are having massive problems on our Lumia 920 from ATT. Bad reception, losing Internet connection, etc.
    We have over 30 920 deployed in our company. We did tests with and without the new patch and its like day and night.
    Sitting in my office, i have 1-2 bars on the phone with updates, showing 4g, but cannot access any website.Plus constantly losing connection.
    On the phone without update I have 2-3 bars, showing LTE and constant internet access.
    It is horrible. We first thought it was related to the Access Point Software, but it is definitively the firmware.
    Please fix asap. Not good advertising for those awesome phones.

    This issue has already been covered on several threads on this forum. The update was found to cause issues on AT&T and was pulled part way through it's roll out. A fresh update is being prepared that fixes the issues. For more information contact AT&T or Nokia US.

  • Weird Safari issues after latest update

    Opening Safari opens Firefox. And searching in Safari browser opens webpage in Firefox browser. I am unable to use Safari at all. Instead any command given in Safari triggers Firefox.

    Will it launch at all, please be a little more descriptive. Remember we are not there to see what you are doing. Also which version of OS X is installed? Your profile indicates you are on 10.8.2, the most up-to-date version is 10.8.4. You may need to download the 10.8.4 Update Combo and re-install. You can locate the Update Combo at:
    http://support.apple.com/kb/DL1659

  • Is there a fix for the wifi connectivity issue after ios6 update?

    Is there a fix for the wifi connectivity issue after ios6 update?
    Cannot connect to any wifi since update to 6.0.1
    How do I get update to 6.0.2?
    Will that even help?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • HT201210 After latest update my iPad (no camera) screen went dark (dim) & blank. Once voice said setup incomplete. Tried reset does nothing. Home screen/wifi setup appeared for moment. Hear swipe see nothing!HELP

    After latest update my iPad (no camera) screen went dark (dim) & blank. At first I could not power off. At some point voice said setup incomplete. In every language. Took someones advise turned off voice over in itunes.. that stopped the voices. itunes identifies and syncs but ipad screen remains blank (dimly lit). Home screen appeared for moment couple of times as well as wifi setup but disappeared as soon as i started to enter info. Hear swipe see nothing! HELP!

    adetoye50 wrote:
    Dear Contacts Journal Support Team,
    FYI, this is a user to user support forum.  You are NOT addressing Apple here.
    Honestly, I doubt anyone is really going to take the time to read the novel you have written.

  • After latest updates cannot stream from iPad to AppleTV

    After latest updates on my New Ipad and Apple TV 2nd Generation, Canot stream video from the iPad to Apple TV.
    I Can Stream from my iMac and from MacBook Pro, but not from iPad.
    Any Advise?
    Thanks.

    Hey guys, unfortunately I've had to re-install Mountain Lion to get rid of the issue, but here's my experiences after trying many things and contacting AppleCare...
    First, I had Lion and had upgraded to ML. They had me go do the following with limited success:
    1) Reset PRAM (no effect)
    2) Recovery Disk and repair permissions (no effect)
    3) Went to system /Library and User /Library and basically we went through several attempts at removing various files from (/Library/InputMethods, /Library/LaunchAgents, /Library/LaunchDaemons") Once I had essentially removed every file and dragged it into the trash (without deleting), the issue was resolved. So, it seems to point to an application that was not fully supported or giving problems within the ML environment. The plan was to drag them one by one back and do reboot/shutdown until I could isolate the application, but rather than do that, I just did a fresh install to take out any variable that could be present from having to do a Lion/ML upgrade. I was able to put a fresh copy of ML on the computer through the Recovery partition after establishing connection to my router. Everything is working fine now.
    Anyway, hope that helps some of you. It was a frustrating experience but seems to point to application issues wih the OS and not the OS itself. I think developers are still rushing to catch up with full ML support and so you might find yourself having many new updates in drivers or applications over the next month.

  • Netflix will not play on my Mac anymore after latest update...HELP!!

    After latest update, Netflix will no longer play.  When I select a movie, it prompts me to install Microsoft Silverlight, which I have repeatedly done.  Netflix claims the latest MAC update is to blame, not a Netflix issue....PLEASE, any assistance is greatly appreciated.

    Create a new profile as a test to check if your current profile is causing the problems.
    See "Creating a profile":
    *https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
    Profile Backup and Restore
    *http://kb.mozillazine.org/Profile_backup
    *https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • Itunes crashed after latest updat

    Itunes crashed after latest update. I have uninstalled it but cannot reinstall it??

    Hey duffy-1,
    Thanks for the question. It sounds like you are having issues re-installing iTunes. The following resource may provide a solution:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Thanks,
    Matt M.

Maybe you are looking for

  • ODBC Driver 8.1.7.3 - pending bugs?

    Does somebody know if the problem below has been fixed with Oracle ODBC 8.1.7.3 driver for NT? Version 8.1.7.2.0 of the Oracle ODBC driver (with Net8 8.1.7.0.0) tends to fail with multithreading application, running only on a single processor. Theref

  • Want to display a still image if user cannot see Flash

    I am looking at all the various Flash detectors and am a bit overwhelmed. Most of the info I find is from 2008 and before so I am afraid it is outdated. I want to be able to detect if a user has flash plugin and if not then display a still image. I a

  • "Multiple cd burn" error  for 15 minutes of songs!

    twice in the last week, with different play lists, I have created small play lists, with total song times less than 25 minutes. When I click "Burn CD" it says, "this play list will require multiple cds" anyone else having this problem? Why would I ne

  • Reading data from URG-04LX-UG01

    Hi. I'm curently trying to create a vi that reads the data from a URG-04LX LIDAR laser. When I try to connect to the device through LabVIEW I can't read anything from it, if I use the Basic serial write and read example vi all I get is nothing or if

  • Need to reset a new email setting for my Desktop Mac OSX 10.8.6

    I have had my OSX 10.8.6 for some time and could not remember my email password and ultimately deleted the account.  I now need to start over with creating a new email account, but am having trouble.  It is not working and saying the server is "off-l