MBPr Windows and Thunderbolt Display

Hi there,
I am trying to have my MBPr and Thunderbolt Display working under bootcamp with Windows 8. All the peripherals attached to the TBD are working fine but the display remains black/off. I am pretty sure that a solution exists but can't find the right. I've tried and under Windows 7 behavior still the same, whereas under MacOSx TBD display works fine.
Thanks for you support !
RV

I made the usb stick back when I installed windows 7 that made my imacs amd gpu see the monitor connected as it did in osx and in the same was as any other windows computer with a connected extra screen
(so I turn it on in windows display settings and maybe the amd catalyst software i forget)
when I upgraded to win8 it just used the win7 driver and it still worked fine
same when I later got te official win8 drivers from apple

Similar Messages

  • Macbook pro 17 inch primo 2011 and thunderbolt display crashes

    I have a Macbook pro 17 inch primo 2011 and thunderbolt display which has recently started to crash.
    Only modifications I have doen lately is I swapped the CD/DVD drive for a harddrive and put in 16 GB of ram
    but it has been running for more than a month with these hardware additions without problems.
    Today my Macbook has started to crash frequently within 10 min to 1 hour after plugging in my thunderbolt display.
    I tried to check CPU heat, change RAM but it keps crashing.
    When it crashes it either gives me a blue screen, a black screen or a distorts everythings and freeze up.
    When rebooting I have to press Command-Option-P-R to clear NVRAM / PRAM.
    I found a few support threads from people having similar problems so I started to disconnect the thunderbolt display
    and without plugging it in my laptop works fine.
    I have done a SMC reset also but that has not resolved my issue.
    Below is the crash report and if anybody has any suggestions what to do to resolve this please let me know
    My thunderbolt display was purchased in late 2011
    If this is not solveable what options do I have ?
    Thanks !
    Interval Since Last Panic Report:  2527129 sec
    Panics Since Last Report:          6
    Anonymous UUID:                    5309BD58-3CBB-321E-545E-6EE6BED7E0E2
    Tue Feb  5 17:02:21 2013
    Machine-check capabilities 0x0000000000000c09:
    family: 6 model: 42 stepping: 7 microcode: 26
    Intel(R) Core(TM) i7-2720QM CPU @ 2.20GHz
    9 error-reporting banks
    threshold-based error status present
    extended corrected memory error handling present
    Processor 0: machine-check status 0x0000000000000004:
    machine-check in progress
    MCA error-reporting registers:
    IA32_MC0_STATUS(0x401): 0x0000000000000000 invalid
    IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
    IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
    IA32_MC3_STATUS(0x40d): 0xbe00000000800400 valid
      MCA error code:            0x0400
      Model specific error code: 0x0080
      Other information:         0x00000000
      Threshold-based status:    Undefined
      Status bits:
       Processor context corrupt
       ADDR register valid
       MISC register valid
       Error enabled
       Uncorrected error
    IA32_MC3_ADDR(0x40e): 0x00003f7f85769a95
    IA32_MC3_MISC(0x40f): 0x000000000003ffff
    IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
    IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
    IA32_MC6_STATUS(0x419): 0x0020000000000000 invalid
    IA32_MC7_STATUS(0x41d): 0x0020000000000000 invalid
    IA32_MC8_STATUS(0x421): 0x0020000000000000 invalid
    Processor 1: machine-check status 0x0000000000000005:
    restart IP valid
    machine-check in progress
    MCA error-reporting registers:
    IA32_MC0_STATUS(0x401): 0x0000000000000000 invalid
    IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
    IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
    IA32_MC3_STATUS(0x40d): 0xbe00000000800400 valid
      MCA error code:            0x0400
      Model specific error code: 0x0080
      Other information:         0x00000000
      Threshold-based status:    Undefined
      Status bits:
       Processor context corrupt
       ADDR register valid
       MISC register valid
       Error enabled
       Uncorrected error
    IA32_MC3_ADDR(0x40e): 0x00003f7f85769a95
    IA32_MC3_MISC(0x40f): 0x000000000003ffff
    IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
    IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
    IA32_MC6_STATUS(0x419): 0x0020000000000000 invalid
    IA32_MC7_STATUS(0x41d): 0x0020000000000000 invalid
    Package 0 logged:
    IA32_MC8_STATUS(0x421): 0x0020000000000000 invalid
    Processor 2: no valid machine-check state
    Processor 3: no valid machine-check state
    Processor 4: machine-check status 0x0000000000000004:
    machine-check in progress
    MCA error-reporting registers:
    IA32_MC0_STATUS(0x401): 0x0000000000000000 invalid
    IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
    IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
    IA32_MC3_STATUS(0x40d): 0xbe00000000800400 valid
      MCA error code:            0x0400
      Model specific error code: 0x0080
      Other information:         0x00000000
      Threshold-based status:    Undefined
      Status bits:
       Processor context corrupt
       ADDR register valid
       MISC register valid
       Error enabled
       Uncorrected error
    IA32_MC3_ADDR(0x40e): 0x00003f7f85fa3e1f
    IA32_MC3_MISC(0x40f): 0x000000000003ffff
    IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
    IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
    IA32_MC6_STATUS(0x419): 0x0020000000000000 invalid
    IA32_MC7_STATUS(0x41d): 0x0020000000000000 invalid
    IA32_MC8_STATUS(0x421): 0x0020000000000000 invalid
    Processor 5: machine-check status 0x0000000000000005:
    restart IP valid
    machine-check in progress
    MCA error-reporting registers:
    IA32_MC0_STATUS(0x401): 0x0000000000000000 invalid
    IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
    IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
    IA32_MC3_STATUS(0x40d): 0xbe00000000800400 valid
      MCA error code:            0x0400
      Model specific error code: 0x0080
      Other information:         0x00000000
      Threshold-based status:    Undefined
      Status bits:
       Processor context corrupt
       ADDR register valid
       MISC register valid
       Error enabled
       Uncorrected error
    IA32_MC3_ADDR(0x40e): 0x00003f7f85fa3e1f
    IA32_MC3_MISC(0x40f): 0x000000000003ffff
    IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
    IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
    IA32_MC6_STATUS(0x419): 0x0020000000000000 invalid
    IA32_MC7_STATUS(0x41d): 0x0020000000000000 invalid
    IA32_MC8_STATUS(0x421): 0x0020000000000000 invalid
    Processor 6: no valid machine-check state
    Processor 7: no valid machine-check state
    panic(cpu 0 caller 0xffffff80048b83c9): "Machine Check at 0xffffff7f85769a95, registers:\n" "CR0: 0x000000008001003b, CR2: 0x000000010cd0e30c, CR3: 0x00000000072b4000, CR4: 0x00000000000606e0\n" "RAX: 0xffffff802516f800, RBX: 0xffffff802516f800, RCX: 0xffffff80253ab800, RDX: 0x0000000000000001\n" "RSP: 0xffffff8207ad3e90, RBP: 0xffffff8207ad3ec0, RSI: 0xffffff8207ad3edf, RDI: 0xffffff802520e000\n" "R8:  0xffffff8004ebec60, R9:  0x7fffffffffffff00, R10: 0xffffff8004ebdc20, R11: 0x0000000000000201\n" "R12: 0xffffff80253ab800, R13: 0xffffff81d60d2000, R14: 0xffffff8207ad3edf, R15: 0xffffff802520e000\n" "RFL: 0x0000000000010282, RIP: 0xffffff7f85769a95, CS:  0x0000000000000008, SS:  0x0000000000000010\n" "Error code: 0x0000000000000000\n"@/SourceCache/xnu/xnu-2050.18.24/osfmk/i386/trap_native.c: 280
    Backtrace (CPU 0), Frame : Return Address
    0xffffff800470bd20 : 0xffffff800481d626
    0xffffff800470bd90 : 0xffffff80048b83c9
    0xffffff800470bf00 : 0xffffff80048cedbf
    0xffffff8207ad3ec0 : 0xffffff7f856d75b4
    0xffffff8207ad3ef0 : 0xffffff8004c472a8
    0xffffff8207ad3f30 : 0xffffff8004c45daa
    0xffffff8207ad3f80 : 0xffffff8004c45ed9
    0xffffff8207ad3fb0 : 0xffffff80048b26b7
          Kernel Extensions in backtrace:
             com.apple.driver.AirPort.Brcm4331(602.15.22)[5BDCA43F-AD42-3F05-BCCF-BC364D17E1 5F]@0xffffff7f856ca000->0xffffff7f858bbfff
                dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f84e72000
                dependency: com.apple.iokit.IO80211Family(500.15)[4282DF5A-86B9-3213-B9B1-675FAD842A94]@0xf fffff7f8565e000
                dependency: com.apple.iokit.IONetworkingFamily(3.0)[28575328-A798-34B3-BD84-D708138EBD17]@0 xffffff7f85015000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    12C60
    Kernel version:
    Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
    Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
    Kernel slide:     0x0000000004600000
    Kernel text base: 0xffffff8004800000
    System model name: MacBookPro8,3 (Mac-942459F5819B171B)
    System uptime in nanoseconds: 6197670207287
    last loaded kext at 6133447331639: com.apple.driver.AppleUSBCDC          4.1.22 (addr 0xffffff7f86cb5000, size 16384)
    last unloaded kext at 5379727445407: com.apple.driver.AppleUSBCDC          4.1.22 (addr 0xffffff7f86cb2000, size 12288)
    loaded kexts:
    com.apple.driver.AppleUSBCDC          4.1.22
    com.apple.iokit.SCSITaskUserClient          3.5.1
    com.apple.filesystems.smbfs          1.8
    com.apple.filesystems.afpfs          10.0
    com.apple.nke.asp_tcp          7.0.0
    com.apple.driver.AudioAUUC          1.60
    com.apple.driver.AppleHWSensor          1.9.5d0
    com.apple.filesystems.autofs          3.0
    com.apple.filesystems.ntfs          3.10
    com.apple.iokit.IOBluetoothSerialManager          4.0.9f33
    com.apple.driver.AGPM          100.12.69
    com.apple.driver.AppleMikeyHIDDriver          122
    com.apple.driver.AppleHDA          2.3.1f2
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.ApplePolicyControl          3.2.11
    com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.0.9f33
    com.apple.driver.AppleUpstreamUserClient          3.5.10
    com.apple.driver.AppleIntelHD3000Graphics          8.0.0
    com.apple.driver.AppleMCCSControl          1.0.33
    com.apple.kext.AMDFramebuffer          8.0.0
    com.apple.driver.SMCMotionSensor          3.0.2d6
    com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
    com.apple.driver.AppleMikeyDriver          2.3.1f2
    com.apple.driver.AppleLPC          1.6.0
    com.apple.driver.AppleSMCLMU          2.0.2d0
    com.apple.AMDRadeonAccelerator          1.0.0
    com.apple.driver.AppleSMCPDRC          1.0.0
    com.apple.driver.AppleMuxControl          3.2.11
    com.apple.driver.AppleIntelSNBGraphicsFB          8.0.0
    com.apple.driver.AppleUSBTCButtons          235.4
    com.apple.driver.AppleUSBTCKeyboard          235.4
    com.apple.driver.AppleIRController          320.15
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          34
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCIBlockStorage          2.2.2
    com.apple.driver.AppleUSBHub          5.2.5
    com.apple.iokit.AppleBCM5701Ethernet          3.2.5b3
    com.apple.driver.AirPort.Brcm4331          602.15.22
    com.apple.driver.AppleFWOHCI          4.9.6
    com.apple.driver.AppleAHCIPort          2.4.1
    com.apple.driver.AppleUSBEHCI          5.4.0
    com.apple.driver.AppleEFINVRAM          1.6.1
    com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
    com.apple.driver.AppleSmartBatteryManager          161.0.0
    com.apple.driver.AppleACPIButtons          1.6
    com.apple.driver.AppleRTC          1.5
    com.apple.driver.AppleHPET          1.7
    com.apple.driver.AppleSMBIOS          1.9
    com.apple.driver.AppleACPIEC          1.6
    com.apple.driver.AppleAPIC          1.6
    com.apple.nke.applicationfirewall          4.0.39
    com.apple.security.quarantine          2
    com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
    com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.1
    com.apple.iokit.IOFireWireSerialBusProtocolTransport          2.1.1
    com.apple.iokit.IOFireWireSBP2          4.2.0
    com.apple.security.SecureRemotePassword          1.0
    com.apple.kext.triggers          1.0
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.1
    com.apple.iokit.IOSerialFamily          10.0.6
    com.apple.driver.DspFuncLib          2.3.1f2
    com.apple.iokit.IOAudioFamily          1.8.9fc10
    com.apple.kext.OSvKernDSPLib          1.6
    com.apple.iokit.IOSurface          86.0.3
    com.apple.iokit.IOBluetoothFamily          4.0.9f33
    com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.0.9f33
    com.apple.driver.IOPlatformPluginLegacy          1.0.0
    com.apple.driver.AppleSMBusController          1.0.10d0
    com.apple.driver.AppleSMBusPCI          1.0.10d0
    com.apple.driver.AppleSMC          3.1.4d2
    com.apple.iokit.IOAcceleratorFamily          19.0.26
    com.apple.kext.AMD6000Controller          8.0.0
    com.apple.kext.AMDSupport          8.0.0
    com.apple.driver.AppleHDAController          2.3.1f2
    com.apple.iokit.IOHDAFamily          2.3.1f2
    com.apple.driver.IOPlatformPluginFamily          5.2.0d16
    com.apple.driver.AppleGraphicsControl          3.2.11
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.iokit.IONDRVSupport          2.3.5
    com.apple.iokit.IOGraphicsFamily          2.3.5
    com.apple.iokit.IOFireWireIP          2.2.5
    com.apple.driver.AppleThunderboltDPInAdapter          1.8.5
    com.apple.driver.AppleThunderboltDPAdapterFamily          1.8.5
    com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.5
    com.apple.driver.AppleUSBMultitouch          235.7
    com.apple.iokit.IOUSBHIDDriver          5.2.5
    com.apple.driver.AppleUSBMergeNub          5.2.5
    com.apple.driver.AppleUSBComposite          5.2.5
    com.apple.driver.CoreStorage          274.7
    com.apple.driver.AppleThunderboltNHI          1.6.0
    com.apple.iokit.IOThunderboltFamily          2.1.1
    com.apple.iokit.IOUSBUserClient          5.2.5
    com.apple.iokit.IOEthernetAVBController          1.0.2b1
    com.apple.iokit.IO80211Family          500.15
    com.apple.iokit.I
    Model: MacBookPro8,3, BootROM MBP81.0047.B27, 4 processors, Intel Core i7, 2.2 GHz, 16 GB, SMC 1.70f5
    Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 512 MB
    Graphics: AMD Radeon HD 6750M, AMD Radeon HD 6750M, PCIe, 1024 MB
    Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D534F384758334D314131333333433920
    Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D534F384758334D314131333333433920
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.81.22)
    Bluetooth: Version 4.0.9f33 10885, 2 service, 11 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: APPLE SSD TS256C, 251 GB
    Serial ATA Device: ST750LX003-1AC154, 750,16 GB
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfa100000 / 3
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0246, 0xfa120000 / 5
    USB Device: BRCM2070 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821a, 0xfa113000 / 6
    USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0xfa200000 / 2
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfd100000 / 2
    USB Device: USB Receiver, 0x046d  (Logitech Inc.), 0xc51b, 0xfd130000 / 5
    USB Device: iPhone, apple_vendor_id, 0x12a0, 0xfd120000 / 4
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd110000 / 3
    FireWire Device: My Book 111D, WD, 800mbit_speed

    The other day I got the blue screen, the fan going on high, and then when I disconnect my thunderbolt connection from my macbook pro - i get a shutdown.
    Today I got flickering followed by the fan on high and then again I disconneced my thunderbolt cable and after a minute or two a shudown.
    This never happened before.  Actually I was suprised to hear about a firmware update for flickering since that's never happened to me but since updating I now get the flicker.
    Any ideas??  Any help would be greatly appreciated as this is my work labtop.

  • MBP Retina and Thunderbolt Display color correction

    What are my options regarding color correction for a new 13" Retina MBP and Thunderbolt display using Spyder color calibration system, or equivalent?  Really important I nail that down before purchasing.
    Thanks!
    Tom

    Disable GPU drawing in Photoshop's preferences, and let Apple know about their video driver problems.

  • Windows 7 and Thunderbolt Display

    I have installed BootCamp using the reccommended method, a USB Drive and an ISO.  BootCamp installed it's drivers at the end of the initial Win7 install and all seem to be running ok..BUT when I hook up an Apple "Thunderbolt Display", I get a black screen on theTB display while my MBP13Retina is just fine.  All the other ports and audio that the TB Display supports seem to work just fine, so what happened to the Thunderbolt Display video driver????  I see others have similar problems but is Apple working on this issue?  By the way, the TB display works just fine in MAC OSX 10.9 Mavericks.  So, where is the TB Display driver for Win7?  Inquiring minds, want to know...

    I'm beginning to believe that this all started after upgrading to OSX 10.9 Mavericks.  Apple need to update their BootCamp drivers to recognize the Thunderbolt display.  Till then, It will be hit, and probably miss whether anyone can get it to work using Win7 Bootcamp.  I have heard others are having the same problem with Win 8.x as well.
    C'mon Apple, fix this thing..I want to use your display in Win7 as well as OSX !!!

  • MBP Bootcamp install of USB Windows 7 , Thunderbolt Display

    We need support from APPLE! BootCamp
    Here are my issues.
    Like many users, I must abandon the marvelous os x, and head to the darkside -  Windows 7 for work.
    I have a MBP early 2011. I must use Bootcamp, because of the resource hogging the 3d CAD programs I use. have tried to in the past with VMWARE, Parallels ect. with no luck
    I have a Corsair Force GT ATA 120 gb SSD III,  installed and my optical drive removed to accommodate my original Hitachi.
    Remember, not to Install that Hitachi drive, until you have used a CD only install of windows 7 onto the SSD.
    Why?- You can not boot from a USB disc that I am aware of, or use an external optical drive case, for your superdrive.
    This is not ok, we need the capability to install windows 7 from something other than a CD. I went to reformat my SSD I was forced to open up my MBP case again. to reinstall the Super drive. Install Windows 7, then remove my superdrive and reinstall my 500gb Hitachi.
    This is a royal, pain in the butt.
    If a mac air has the capabilities of installing windows 7 from a usb APPLE, please give same rights to MBP.
    Additionally, my osX runs like absolute garbage on the SSD, I rarely if ever use it because of the constant pinwheel I receive, I have researched this error, with
    little or no luck, using apps like TRIM seem not to help.
    I also own a thunderbolt display, and the fact that there is no support on connecting it without restarting the computer is also an issue.
    Bootcamp Development -should add in fan speed Control,

    Buddah1200 wrote:
    We need support from APPLE! BootCamp
    Here are my issues.
    Like many users, I must abandon the marvelous os x, and head to the darkside -  Windows 7 for work.
    I have a MBP early 2011. I must use Bootcamp, because of the resource hogging the 3d CAD programs I use. have tried to in the past with VMWARE, Parallels ect. with no luck
    I have a Corsair Force GT ATA 120 gb SSD III,  installed and my optical drive removed to accommodate my original Hitachi.
    Remember, not to Install that Hitachi drive, until you have used a CD only install of windows 7 onto the SSD.
    Because you will need the internal superdrive to install Windows.

  • MacBook Pro Retina and Thunderbolt display

    Hi all,
    I noticed a for me new strange behavior when running  my new TBD on my new MBPR. Running Mountain Lion.
    When the lid is closed, that is when the MBPR's screen is closed and I use the TBD as an external display it only works when I use the TBD's power supply or the Mag Safe dito, do i disconnect the power from the MBPR the screen geas black... ok , that is as described in the manual. But....
    ..in the same scernario with no external power to the MBPR... if I open the MBPR, that is pull up the MBPR's screen they both spring to life anf can be used again???
    What's the logic about this?
    Please tell me the relevance why this is possible?
    Regards
    /Cekari

    Welcome to Apple Support Communities
    Open System Information (in /Applications/Utilities) without the Thunderbolt Display plugged in, and choose Thunderbolt in the sidebar. What does System Information say? Then, try with the Thunderbolt Display plugged in, and tell me the results.
    Also, reset the SMC > http://support.apple.com/kb/HT3964 And do a PRAM reset > http://support.apple.com/kb/HT1379

  • Macbook Pro and Thunderbolt display day to day work question

    I have a late 2013 15 inch Retina Macbook Pro and recently bought a Thunderbolt display.
    When I'm in my office I use it on the display don't have the display anytime I'm not in the office.
    Given the larger pixel dimension on the display, when I'm in the office and use the display, I'm having to re-size windows constantly to make maximum use of the real estate.
    Are there any settings on the Macbook Pro and/or the Thunderbolt Display where without having to adjust I can have windows maximize the available real estate?  Thanks.

    I kind of figured this out. The reason I wasn't satisfied was that without the power adaptor when you hit a button on the keyboard the monitor actually wakes up the computer, works fine for a few seconds and then puts the computer to sleep. That kind of proves that it does work, technically at least. The problem is going into sleep mode afterwards.
    Anyway i guess it just doesnt work. Thanks.
    ps. If there is a way of discharging the battery with software while the power adaptor was still on, would be great help.

  • Wacom Intuos 5 with Wireless Accessory and Thunderbolt Display

    It appears to be that the new Apple Thunderbolt display is interfering somehow with the Wacom wireless accessory kit. Everything works fine with 2 different thunderbolt computers I've tried it on. When I plug the Thunderbolt display in (Wacom wireless reciever always in Mac's USB port), it works, for a very short time, starts to stutter and become very unresponsive and then the tablet just loses connection. I have been able to duplicate this now several times. Unplug the Thunderbolt connection on the Apple Display from the computer, and the tablet works fine again with the Wacom Wireless Accessory. The Intuos 5 tablet works fine via a direct USB connection with the Thunderbolt display plugged in. It is the wireless connection that fails.
    I have 10.7.3 installed and the latest Wacom Dirver (of which I have also tried to remove and reinstall).

    I had the same problem with LR CC, W 8.1 and Wacom.
    This worked for me:
    http://www.makeuseof.com/tag/how-to-best-use-or-disable-the-windows-8-touch-keyboard/

  • What are the best Color "Display Settings" for both my Macbook Pro Retina and Thunderbolt Display??

    I have recently purchased a Thunderbolt Display for my MBPr (early 2013) and was wondering what were the best settings for both to obtain an equal color and graphic appearance. I want to have them identical for working on graphics and illustrations.
    Thanks

    I have the same laptop. There's nothing you really need to do to optimise the system. Perhaps just install the cuda drivers.
    It runs premiere like a dream.

  • Maverick and thunderbolt display

    I have upgraded to Maveick as soos as it was available.
    I have got a MBPr 15" with an Thunderbolt Display.
    The big issue I'm facing is that when hthe system go in sleed mode, the display doesn't wake up at all.
    I submit the problem to Apple support but they were not able to fix it and sent the problem to Cupertino.
    Has anyone the same problem?
    Thanks

    I'm also experiencing this problem and have to unplug the Thunderbolt cable as well. I've tried adjusting the monitor settings, but nothing seems to help. Apple are you working on a fix?

  • Vudu HDX and Thunderbolt Display

    Vudu HDX content will display on Macbook Pro Retina display, but it will not display on mirror to Thunderbolt Display due to HDCP issue. Are there any solutions to this?

    I made the usb stick back when I installed windows 7 that made my imacs amd gpu see the monitor connected as it did in osx and in the same was as any other windows computer with a connected extra screen
    (so I turn it on in windows display settings and maybe the amd catalyst software i forget)
    when I upgraded to win8 it just used the win7 driver and it still worked fine
    same when I later got te official win8 drivers from apple

  • Why can't you Fullscreen both Mac and Thunderbolt display at the same time?

    The plan was to movies in the background while I  surf the internet... Not have a grey screen. WARNING! If you're considering purchasing a Thunderbolt display... I'm warning you. You can't use the Thunderbolt in fullscreen and still use your Mac!
    This is the worst purchase I've ever made- Exactly WHAT am I supposed to do with this Thunderbolt display, charge some iPhones? Why won't it do the very thing I bought it for? Windows has had this capability since XP!!! I sear, if I can't figure out some kind of "hack" to make this piece of junk work: I'M TAKING IT BACK!

    You can't use the Thunderbolt in fullscreen and still use your Mac!
    You can with VLC.
    <http://www.videolan.org>
    Make sure Mirroring is disabled in the Arrangement tab of Displays system preference.
    Select the Thunderbolt display for full screen in VLC's Video preference.

  • I have a Thunderbolt iMac 27" with a Thunderbolt Display attached.  I would like to use the iMac and Thunderbolt display in Target Display Mode for my new Thunderbolt MacBook Pro.  So far, it seems I can only use the iMac screen itself.  How do I do this?

    When I press the Command + F2, the iMac screen becomes a secondary for the MacBook Pro, and the Thunderbolt Display becomes the primary screen for the iMac.  I was hoping that both screens would become secondaries for the MacBook Pro.  Does anyone know how I should proceed?  I have tried to connect the Thunderbolt display directly to the MacBook Pro, and the iMac to the Thunderbolt Display via the separate Thunderbolt cable, but there was no difference.  And since the MacBook Pro only has the one Thunderbolt port, I'm not sure how to proceed.

    Yes, eww, the language definitely states two thunderbolt displays, but I can understand the confusion and was siding with how they could make the mistake to think it would work like they want it to. My appologies for not being clear on that point, but I think you make it clear that the language in the ad says nothing about an imac.
    Having said that all the language about TB would suggest that this would be possible. http://www.apple.com/thunderbolt/
    High performance on display.
    Thunderbolt I/O technology provides native support for the Apple Thunderbolt Display and Mini DisplayPort displays. It also supports DisplayPort, DVI, HDMI, and VGA displays through the use of existing adapters. So you can connect your Apple LED Cinema Display or other display, along with multiple high-speed devices, all from a single port.

  • Macbook pro and Thunderbolt display on battery power no go.

    I use my macbook pro mainly on my desk with the thunderbolt display and its lid closed. While having the power adapter connected to the macbook everything works fine. When I disconnect the power adaptor and try to wake up the computer it comes to life for a few seconds and then goes back to sleep for good. I cannot use the thunderbolt display while having the macbook on battery power. That causes the issue of the battery not discharging which I am aware is pretty bad. Any advice is welcome. Thanks.

    I kind of figured this out. The reason I wasn't satisfied was that without the power adaptor when you hit a button on the keyboard the monitor actually wakes up the computer, works fine for a few seconds and then puts the computer to sleep. That kind of proves that it does work, technically at least. The problem is going into sleep mode afterwards.
    Anyway i guess it just doesnt work. Thanks.
    ps. If there is a way of discharging the battery with software while the power adaptor was still on, would be great help.

  • IMac and Thunderbolt display connectivity

    Hello everybody,
    Several days ago I've bought new Thunderbold 27' display and connected it as a second screen to my iMac. Video works fine but I've just discovered that all ports of that display are not functioning, i.e. USB ports are not working, and I can't see its camera and speakers from my iMac.
    Is it possible somehow to get it working? Especially USB would be very helpful.
    Thank you.

    http://support.apple.com/kb/DL1451
    I found this update on apple - but can't use it as I have 10.7.3 version of osX.
    My data for thunderbolt display:
    Thunderbolt Display:
      Vendor Name:          Apple, Inc.
      Device Name:          Thunderbolt Display
      Vendor ID:          0x1
      Device ID:          0x8002
      Device Revision:          0x1
      UID:          0x0001000100170ED0
      Firmware Version:          22.2
      Port:
      Status:          Connected
      Link Status:          2/1
      Port Micro Firmware Version:          0.0.21
      Cable Micro Firmware Version:          0.1.18
      Port:
      Status:          No devices connected
      Link Status:          7
      Super Port Micro Firmware Version:          0.0.21
    Which version of firmare do you have?
    Thank you

Maybe you are looking for