MBPro won't wake up from screen saver?

Ok so here is the deal, on my mbPro mid 2010 laptop, I came back from lunch and the screen saver is working as per normal, but when I hit the space bar or move the mouse the is no response, however if I move the curser to the lower left hand corner which, for me is a hot corner set to activate mission control - then MC works. So then I click on one of my miniature windows thinking that it should then bring that window to full screen without the screen saver. This doesn't produce the expected result either, instead mission control animates itself back to a full screen, except the sreen saver is still active.
Its an endless loop - any ideas would be very helpful - Thanks in advance

I am also having the same issue. There's another thread here: https://discussions.apple.com/message/19004375#19004375
Mine is frozen when I come back to my machine and wake it up... the lock screen appears but it's frozen - usually I can move the mouse around and either see the arrow or spinning beach ball. Sometimes I notice the time is frozen from several mintures prior from when I left the machine ... I have turned of the lock on screensaver option for now to see if that will keep it from freezing.

Similar Messages

Retina Macbook Pro doesn't wake up from screen saver

Hi There -
I've been having some issues with my computer coming back to life after the screen saver has been initiated. Once it freezes, it's frozen for good and requires a restart. This has been happening relatively frequently and I'm assuming it's got something to do with the new hardware, specifically the retina display itself?
Anyway, I'd roll the dice and upgrade to Mountain Lion, but I've got some programs that have not been tested in that environment and I'd rather stick with Lion for the time being.
Has anyone else had this issue?

I am also having the same issue. There's another thread here: https://discussions.apple.com/message/19004375#19004375
Mine is frozen when I come back to my machine and wake it up... the lock screen appears but it's frozen - usually I can move the mouse around and either see the arrow or spinning beach ball. Sometimes I notice the time is frozen from several mintures prior from when I left the machine ... I have turned of the lock on screensaver option for now to see if that will keep it from freezing.

Macbook running 10.5.8 now won't wake up after screen saver

seems lst week m,y Macbook is locking up when it goes to screensaver...I hit power button and screen comes back with mouse frozen...have to reboot..assuming it is bad update>?

seems lst week m,y Macbook is locking up when it goes to screensaver...I hit power button and screen comes back with mouse frozen...have to reboot..assuming it is bad update>?

MacBook screen goes gray and won't wake up from sleep - 10.6.2

We have a MacBook Alum running 10.6.2 with 4gb ram.
We recently upgraded to 10.6.2 from Leopard and this issue started to happen.
It seems that as the MacBook goes to sleep or goes to the screensaver mode, the screen goes gray and won't wake up from sleep or screensaver mode without a hard reboot.
Is Apple aware of this issue? It did not happen with the previous version of Leopard. This issue arrived when we upgraded to Snow Leopard. Other than the sleep issue, SL is rock solid. Kudos to Apple for producing a great OS!

Hi GrooveDaddy,
Have you contacted AppleCare via telephone to make them aware of this issue? It definitely doesn't sound like normal behavior. What sort of troubleshooting have you done so far on the issue? What sort of settings do you have on your screen saver? Password protected? Custom iPhoto slideshow?
What if you manually sleep the machine by closing the lid or engaging it via software (via the Apple menu) does the screen have the issue in both scenarios?

Does anyone know what to do when a apple mac book pro screen won't wake up from sleep?

Does anyone know what to do when a apple mac book pro screen won't wake up from sleep? I have tried to restart it and it still won't come on.

Try this, which is located in your macbook pros user manual.

G4 DP 450 won't wake up from sleep....

hi,
My PowerMac DP 450 (Giga Designs 1.8Ghz DP) has a bizarre problem. If event activity is idle for an hour or so the screen will go blank (even though there is the flurry screen saver running at the time) and it won't wake up from the sleep mode. I have to press the reset switch to recover. This issue pre-dates the processor upgrade so it isn't the processor.
Any ideas on what is causing this? How do you diagnose this issue?
If I leave a DVD in the machine and let it paly all day. This won't happen. Something weird about idle events triggering this.
thanks.
PowerBook G4 PowerMac DP 450 Mac OS X (10.3.9) PowerMac DP GigaDesigns 1.8Ghz FirmTek Sata

If your Mac happily goes to sleep but won't wake up--Hold down the power switch to force-reboot your machine and get it running again.
Don't worry-your Mac isn't narcoleptic. Its Open Firmware system or NVRAM (nonvolatile RAM) is likely corrupt, and your Mac can't remember how to wake up.
Restart your Mac and immediately hold down the Command-Option-O-F key combo until you see a somewhat intimidating command-line display that ends with the Open Fimware prompt. Type the following lines:
reset-nvram
press Return on keyboard
set-defaults
press Return
reset-all
press Return
Your Mac will reboot. Once it's running, put it back to sleep to test. If the problem recurs your Energy Saver preferences may be the culprit. Delete the com.apple.PowerManagement.plist file (go to Finder/Hard drive/Library/Preferences/SystemConfiguration)--don't worry, your Mac will regenerate a new one--and then restart to see if that rights the wrong.
Still did'nt work? Might be time to call AppleCare or see an Apple Genius or a technician.
Cheers!
DALE

G5 won't wake up from sleep & fans go to high speed ???

G5 won't wake up from sleep & fans will go to high speed within a few minutes of it going to sleep. Whether I put it to sleep or it goes to sleep on it's own per my preferences in energy saver. I have to manually shut it down by holding the power button in. I ran the system hardware dvd and results were good. I have repaired permissions, reset the PRAM.
Any ideas?

Hi Patrick,
How to reset the SMU on a Power Mac G5 (Late 2004) or Power Mac G5 (Late 2005) ...
http://support.apple.com/kb/HT1436
"Try Disk Utility
1. Insert the Mac OS X Tiger Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, test sleep in Safe Mode, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

M70-160: won't wake up from hibernate or standby - software or hardware?

I just got maaaaaan!!
works fine, but won't wake up from hibernate or standbye !! unless yur gonna wait for awhile!! 15min or something like that!!
After that it will wake and work normally !
I thought it's overheating problem but now just power it on and when the toshiba logo appear if you turn it off, it won't power on again, but after 15min it WILL !!!
so it's not a heating problem !!
It does that even without HD on it !!
at first it was hibernate and standby problem, now it dose the same with shutdown !!
what can I do!!
i just bought it guys !! ASP is to far a way !!
is there anyway i can do to fix it !!
i do fix PCs alot but not notebooks !!

thank you for your help and the fast replay, i really really appreciate it.
I'll explain the problem in details, right after hibernate or standby IF you press power button the led goes blue, fan starts, HD led lights, battery led, power adapter led (if its connected), and cd player make sound as if it looking for a CD, and THEN fan stopped, HD led goes off, no sound of CD, leaves u only with power button led ON, a nice frustrating Blue
after waiting, u eventually gave up, turn it off by along press on power button, and then no matter wut u do, simply won't start only same sounds and leds as mentioned previously, nothing on the screen as if its dead !! no logo no nothing.
give it a time ( about 15min with battery connected, or 5min or less with battery out) Press the power Button, THERE U GO, works perfectly !!
same case with shutdown but not always as hibernate and standby (though once it did wakeup from standby!!), but most of the time after shutdown u have to wait 15min!!
no USB flash memory connected or anything else !
i did install winXP pro SP2 on it and installed the drivers and Microsoft HOT fixes also, but problem remains.
i also did recovery from the recovery CD that comes with it, also no good !!
i noticed that if u disconnected the battery the unit needs shorter time to be able to wake up or boot. about 5 min.
wut kills me is that the unit works perfectly and i like it !!! i only got this issue with it !!
so wut i need to know is this: Is there anyway to make sure weather if its a software problem or a hardware problem?
its not easy to go to the local service cuz its in another city!! i need to try first wutever it takes to fix it on my own!
thank you for your time!

Powerbook G4 won't wake up from sleep

My 4 1/2 year old powerbook G4 won't wake up from sleep anymore. After I close the lid, or even manually put it to sleep, I can still hear the HD run. The backlight on the top of the lid never lights up and when I open the lid the blank screen doesn't do anything. The only way for me to work around this issue is to power down the laptop and start it up again. Since I've been having this issue every program that I use take forever to load. The spinning color wheel is the bane of my existence! I tried resetting the PRAM, I used Onyx to repair file permissions, and am out of ideas. Any help would be greatly appreciated.

How incredibly strange. I am having exactly the same problems with my computer. I just started the same behavior today. I have tried using MacJanitor, repaired permissions, verified disk, but it still will not go to sleep properly. S.M.A.R.T status is verified
I have tested my RAM as described above with no problems surfacing. Anyone else have any ideas that we can try. When I get home on Sunday I will try some more intense investigative tools including re-installing OSX 10.5
By the way, I am running 10.5.4 on a 15" 1.5Ghz G4 Powerbook with 1.25GB of RAM and 28.9GB harddrive free.
Another strange thing I have also observed is that it now takes 10 minutes to start up. 5 minutes on the Apple screen with pinwheel, and then 5 minutes with the blue screen before the cursor appears. After that point startup is normal. Also, even though Disk Utility shows 28 GB free on my harddrive when I try to copy something, it says that I do not have enough free space on my harddrive.
Do you suppose this means that my harddrive is on the way out? Is this also the case of the original poster?

It won't wake up from sleep after I open it. If I close it and then open it, it doesn't wake up for at least 5 minutes.

just upgrade my macbook air to yosemite. now when i physically close the computer and open it back up, it won't wake up from sleep mode. I tried pressing the power button, but it wouldnt turn on. Then once it somehow turned on by itself, I tried a PRAM and SMC reset. Then I tried closing and opening the computer again and I still had the same problem. nothing has worked. when i do get the computer on, i randomly goes into sleep mode again. I've check the settings for display and it says after 45 minutes of nothing it will sleep.

Step 1
Take all the applicable steps in this support article. That's the starting point for any further efforts to solve the problem. Please read the whole article carefully (some of it is hidden by disclosure triangles) and don't skip any of the steps, including the ones under the heading "Additional troubleshooting." If you don't understand any of the steps, ask for guidance.
Step 2
If you're running OS X 10.8.5 or earlier, from the menu bar select
           ▹ System Preferences... ▹ Accessibility
If the checkbox at the bottom marked
          Enable access for assistive devices
is checked, uncheck it and test.
If you're running OS X 10.9 or later, select
           ▹ System Preferences... ▹ Security & Privacy ▹ Privacy ▹ Accessibility
If any applications are listed on the right and have a checked box next to them, uncheck all the boxes and test. You may first have to click the padlock icon in the lower left corner of the window and authenticate as an administrator to unlock the settings.
Step 3
In the Energy Saver pane of System Preferences, uncheck the box marked
          Put hard disks to sleep when possible
Step 4
This and the next step must be taken as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that heading, select
          View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You may see one or more reports with a name that begins with "Sleep Wake Failure" followed by a date. Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
Step 5
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ Diagnostic and Usage Messages
In the search box in the window's toolbar, enter "powerd" (without the quotes.)
You may see one or more lines like this:
com.apple.message.signature: Platform Failure
If you do see that, and you did everything in the preceeding steps, then you're dealing with an internal hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

MacBook won't "wake" up from sleep, when being folded

When I "fold" computer it goes to sleep. But, when I flip up the screen again, my Mac won't "wake" up from sleep mode anymore.
Do anyone know how to fix this problem?
BR
Christian
I have a MacBook 2.26 GHz Intel Core 2 duo, Snow Leopard 10.6.8.

I've solved my problem.
I have reset my MacBook's PRAM settings.
It's very easy: link: http://support.apple.com/kb/HT1379
Resetting PRAM and NVRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Your computer's PRAM and the NVRAM are reset to the default values. The clock settings may be reset to a default date on some models.
Hope this helps
Best regards,
Christian

Resume from Screen Saver Issues

Hey All,
Well...migrated from Leopard to Snow Leopard with minimal issues but
In Leopard, after waking from screen saver, a box would prompt for a password. I've gotten SL to do this, but there is no way to switch user.
I have multiple users and i'm unable to switch users from SL.
Any ideas??
Kayle

Hey All,
Well...migrated from Leopard to Snow Leopard with minimal issues but
In Leopard, after waking from screen saver, a box would prompt for a password. I've gotten SL to do this, but there is no way to switch user.
I have multiple users and i'm unable to switch users from SL.
Any ideas??
Kayle

Won't wake up from sleep mode

I have only had my iMac for a couple weeks and four times now it won't wake up from sleep mode. I have to use the on/off button for a response.

Since you have a new machine, I would call Apple immediately and have them deal with the problem.

X1C won't wake up from sleep mode using keyboard

Hi...so finally got my X1C today. One thing I am noticing is that the machine won't wake up from sleep mode when I press any key on the keyboard -- it only wake up by pressing the power key. This is a bit unexpected to me. Is it by design, and is there any way to change this?
Thanks for your help.
Solved!
Go to Solution.

Does it awaken from stand-by if you press the Fn key? That's been the ThinkPad standard for as long as I can remember.
Regards.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

G3 Bronze Keyboard won't wake up from sleep

I have a hand-me-down Powerbook G3 Lombard 400 Mhz (bronze keyboard), with a dead main battery. It works great with the power adapter, and has just enough charge for me to move it from one outlet to another without shutting down. I'm trying to set it up for use as an Itunes server connected to my home stereo, which is fine because it will always be plugged in.
The problem is that the laptop won't wake up from sleep. This morning I noticed that the display and HD seemed to be sleeping, but the fan/processor buzzing noise was still going (there were no lights other than the little green light on my PCI card). I couldn't figure out any combination of keyboard or power key strokes that would either wake it up or shut it down. I unplugged it, waited half an hour or so, and it finally shut down. I then plugged in, hit power, and it started and booted perfectly (after the expected disk check for abnormal shutdown). Then this afternoon, the whole thing was sleeping (I think -- no sound, no lights other than PCI card light), and again it wouldn't wake up. Again, I unplugged, let it power down (waited for the PCI light do die), the replugged and it started up just fine.
Any idea what gives? Or what I do when it's sleeping? Right now, I have changed the power saving settings so that it never goes to sleep, but I'd really like to let it sleep when people forgot to turn it off...
thanks!

aldpol,
There are many causes for sleep issues and you just have to wade through them one at a time.
You can always force a Lombard or newer powerbook to shut down by pressing/holding the power button until it turns off. As you have noted, this is an undesirable process since you can corrupt the HD.
I would start the troubleshooting in this manner:
1. Unplug all peripherals (PC cards, mouse, everything).
2. Reset the power manager:
http://support.apple.com/kb/HT1431?viewlocale=en_US
3. Now put the powerbook to sleep via the Special menu, wait a minute or so, then wake.
4. If no success, restart while pressing the shift key until you see the message 'extensions off', then release. Now test sleep/wake.
If number #3 is successful, one of you peripherals is probably the troublemaker. If still having issues, please post back with more details if possible.

MBPro won't wake up from screen saver?

Similar Messages

Maybe you are looking for