Mc$6, mc$8 - only zero values
Hello all,
we would to see our vendor's delivery performance using the 2 reports MC$6 and MC$8.
When executing the reports, all vendors are listed, but all other columns (Del. dt. vr1 etc.) have only zero values.
So do I have to configure this report first to get any data or do something else?
Thanks
Anne
Hey,
thanks for your answer.
ME6H is a usefull transaction, but I think it is kind of different from MC$6?
Meanwhile I figured out, that I have to define intervals in MCFC.
But even after defining the intervalls, I only get zero values??
thanks
Anne
Similar Messages
-
How can I set my filter to bring only zeros for the field?
I have a field that has Number as data type in a table in Access. I only want to extract only zero values.
Field1 Field2
Orange 33
Apple 0
pumpkin 0
Tangerine 12
I appreciate your input.
GGGGGNNNNNN
GGGGGNNNNNTry a LEFT JOIN --
SELECT [All Applications-Western].ApplicationNumber, [NN List - Western].approved
FROM [All Applications-Western] LEFT JOIN [NN List - Western] ON [All Applications-Western].DealerNumber = [NN List - Western].DealerNumber
WHERE ((([NN List - Western].approved)=0));
OR a RIGHT JOIN --
SELECT [All Applications-Western].ApplicationNumber, [NN List - Western].approved
FROM [All Applications-Western] RIGHT JOIN [NN List - Western] ON [All Applications-Western].DealerNumber = [NN List - Western].DealerNumber
WHERE ((([NN List - Western].approved)=0));
Build a little, test a little -
Report for Asset with only values (No Zero values)
Hi All
There is requirement where in the user wants to genenerate report for assets with values .There should not be Zero balance assets included in the output. In short only with values in the asset master the report needs to be generated. Can one have any idea on this .
regards
Navin
Edited by: Naveen Rao on Jan 22, 2009 10:04 AMHi
Can you please specify the report name.
regards
Navin -
Display only non zero values in rows
Hi Friends,
I have a key figure "X', and it is split over 12 months (aging buckets), by using formula, but I want to filter values with zero values ie I want to display all non zer values only.
This looks like
Apr 100
May 200
Jun 200
Jul 0
Aug
Sep
Oct
Nov
Dec
Jan
Feb
Mar
In the above example I dont want to display 'Jul' at all, and the rest should be displayed, Wherein all the above are formula(Apr, May,......)
Is it possible ?
If so , what is method.
I tried supress in query properties , Like supress zeros, but it is not working.
Suggest me
Points assured.
SanjayDear Gupta,
In my case condition is not working, as I want to display values that ae non zeros. If I am using conditions, none of the values are displayed like Apr, May,Jun, Jul, etc........, I want to display all values except Jul as that values is zero as per my example.
Please suggest
Sanjay. -
Zero values not taken into account during retraction
Hello,
we are having an issue with data retraction.
When we reset a value to zero, the change in the value is not taken into account and the corresponding value in R/3 remains unchanged.
There are some posts that say that the function modules UPR_COST_PLAN_EXEC and UPR_COST_PLAN_INIT should be modified in order to populate <xth_data> with zero values, but debug mode shows that the data are read before calling these functions, and the zero values are
already ignored at this stage.
Could anyone help me, please?
Thank you in advance!Here is the second method -
Regarding your issue:
Retraction is based on the records of the SEM buffer. Zero records are
in general filtered in the buffer, so that they cannot be considered forplanning functions that execute the retraction. I regret but this is
the normal system behaviour in the standard. As workaround, please use adummy key figure that is set to a value <> 0.
The only way is a work around. If you fill a dummy key figure with an
arbitrary value, the frame work recognizes this as not 0, even if the
proper key figure is 0. In that case the 0 retraction would work. So if
not existing, create an additional dummy key figure to the cube and workon as described.
For all the of retractions (CO-OM, IM, PS) BPS planning functions are
used and they run in the general BPS framework. This framework is
designed to explicitly not process zero records because of performance
reasons.
If zero records would be processed, planning functions would run longer
but they can't deal with those records anyway. Therefore the developmentdecided on the current design, to delete all zero records first, before
processing them with a planning function. This decision has been
discussed several times before and it not likely to be changed.
Regarding SAP note you can check the work aroud I explained can be foundin the oss note 768822 SEM-BPS: Retraction of WBS element w/ Pushback.
I hope this explains the reason.
Please kindly confirm the message if your issue is answered.
Thanks for your support and cooperation. -
Excise invoice with zero values
Hi SAP Gurus,
In CIN, when I created excise invoice with Tcode J1IIN with reference to invoice, I found zero values. When I checked the pricing conditions tab in Billing, I observed that condition types JEXT and JECT are having zero values. Why the system is not picking the values for these condition types, though condition records are being maintained.? In my pricing procedure there is no UTXJ conditon type. Should I maintain the condition records for UTXJ though it is not in our pricing procedure?, since UTXJ is link between tax procedure, pricing procedure and tax code. I expect guidance in this regard..
Thanks in advance
Raksha.Hi Raksha
UTXJ is the only condition which brings the tax code in the document, please add utxj and then check it will definately work. I am not replying in detail so if u want any other clarification please reply back.
Best regards
Vineet Baweja -
Multiprovider displays zero value for Key figure
HI,
Multiprovider contains 3 cubes, in which one keyfigure (YDAYS) presents in two cubes and assigned to multiprovider from two cubes. But iam getting zero value in the multiprovider level. But in the cube level getting the data. This problem iam getting in testing system.
When i compated Develoment system and Testing system everything is correct, mapping, assignment .
Any ideas what might be the problem
Thanks / VenkataCheck the report to see if it has any filters that is available in only one of the infoproviders. if thats the case then move the filter and make it restricted.
Use RSRT to see which infoproviders are being hit when you execute the query. Look in detail. I had the same problem once and careful investigation revealed a filter that was at the report level instead of kf restriction level. -
TCode MIR7: Dump while deleting Parked Invoice with zero value
Hi,
We had parked an Invoice using TCode MIR7 with Zero Value with reference of a PO. Now as the value of invoice is zero, we want to delete it using MIR7.
In MIR7, when we go to Invoice Document-->Delete, it results in dump. Dump is as follows:
Error analysis
Short text of error message:
No document found
Long text of error message:
Technical information about the message:
Message class....... "FI"
Number.............. 124
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_X" " "
"SAPLFMPR" or "LFMPRU05"
"FM_CO_DOCUMENT_DELETE"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which actions and input led to the error.
Information on where terminated
Termination occurred in the ABAP program "SAPLFMPR" - in
"FM_CO_DOCUMENT_DELETE".
The main program was "SAPLMR1M ".
In the source code you have the termination point in line 34
of the (Include) program "LFMPRU05".
Any help.
Regards,
CMC Team.Hi,
Check following SAP notes:-
1173846 (MM) Termination when deleting prepaid logistics invoices
Reason and Prerequisites
This problem is caused by a program error.
1224772 (MM) Error message FI24 when deleting parked invoices
Reason and Prerequisites
This is due to a program error. The total amount of the parked invoice is '0'.
Regards,
Anand Raichura -
Dear BPC Experts,
I am getting incorrect results when running SPRUNCONSO. It seems that the error is due to zero values that are in the database. Would you know how i am getting zero values in the FACT tables? What should i do to prevent this situation in the future?
Best regards,
GraceHi!
Thanks for your comments/inputs. I am getting wrong amounts in the calculation of minority interest expense, equity in net earnings and investments. However, only a few entities are affected.
Minority interest expense = PMIN * Net Profit >>> Using the data in BPC, i dont get the correct results for some entities.
System was calculation correctly in the previous month.
Any idea what is causing this wrong calculation?
Thanks and regards,
grace -
Display only positive values for a particular Keyfigure
Hi..
(Sorry, I accidentally posted this also in Datawarehousing forum, actually it related to BeX forum).
For a particular column(keyfigure) in my report, the user wants to display only positive values.
I used the formula from the one of the forums
(Keyfig > 0)* Keyfig.
This displays only positive values in the column as required. But, the result for this column is also affected. As the result is negative, it shows, zero in the result for this column.
Is there a way in which the result will not be affected by the formula?
I went into the properties of the particular keyfigure and chose Calculate Result as -> Summation.
It throws out the following error message
'Calculating result as...' was not executed
Message no. BRAIN141
Diagnosis
The function 'Calculate Results as ...' could not be used in all
instances.
The recalculation of a result cell always occurs based on the set of
detailed cells subordinated to this cell. This is the most detailed
level of the drilldown. Therefore it is not posible to recalculate in
hierarchical lists. The calculation of a results cell is not performed
if a cell or column with an expand symbol is assigned beneath it.
Otherwise the newly calculated result is changed every time one of its
lower-level nodes is expanded. This is not supported for technical
reasons and would also only confuse users.
Note, however, that calculating with "Suppress Results" is always
executed because the restriction described above does not apply in this
case.
NOTE:
The query shows the keyfigure values for a selected title, for profit center and territory hierarchies.
Any suggestions would be greatly appreciated.
Thanks,
Sai.Hi Deepu,
Thanks for the reply. I tried with ur formula.
LEAF(keyfig) gives all values "zero" for that particular column including the result.
NOT LEAF(keyfig) gives all values "one" for that particular column including the result.
So, ur formula gives the same values as of the present column values.
I tried condition, but it's not working...it says the following errors...
There is a condit. on Title, results row suppress. active on Profit Center
(conditional
Message no. BRAIN144
Diagnosis
Characteristic Title has an output condition and the 'Suppress Results
Cells' property is active for Profit Center. This generally leads to an
incomprehensible output list.
System response
As soon as an output condition is defined for a characteristic (here
Title), the system calculates the corresponding result cells and applies
the output condition. If a result cell of this type is later deleted by
the condition, all the lower-level detail and result cells in its
drilldown are suppressed. Because the result cell is suppressed the
Title rows are then omitted from Profit Center.
In extreme cases this can lead to an entirely empty list being
displayed, although the single rows or columns would be displayed if the
condition were deactivated.
Procedure
Check the query settings, especially results row suppression and the
output conditions.
Procedure for System Administration
You can deactivate this message Brain 144 with transaction RSRT1.
There is a condit. on Profit Center, results row suppress. active on
Territory as in SPL (conditional
Message no. BRAIN144
Diagnosis
Characteristic Profit Center has an output condition and the 'Suppress
Results Cells' property is active for Territory as in SPL. This
generally leads to an incomprehensible output list.
System response
As soon as an output condition is defined for a characteristic (here
Profit Center), the system calculates the corresponding result cells and
applies the output condition. If a result cell of this type is later
deleted by the condition, all the lower-level detail and result cells in
its drilldown are suppressed. Because the result cell is suppressed the
Profit Center rows are then omitted from Territory as in SPL.
In extreme cases this can lead to an entirely empty list being
displayed, although the single rows or columns would be displayed if the
condition were deactivated.
Procedure
Check the query settings, especially results row suppression and the
output conditions.
Procedure for System Administration
You can deactivate this message Brain 144 with transaction RSRT1.
Thank you very much.
Regards,
Sai. -
How to Display WBS's with Zero values in a report created by CJE2
Hi All,
I have created a report using CJE1 (Report painter). When I execute the report, it only shows WBS that have values. How do I display WBS elements that do NOT have values? i.e. display items with zero values. I'm certain there is a setting either within report painter or forms...
Help appreciated.
SamirMenu>Formatting>Report Layout and then tab Rows. Check if setting under 'Treatment of zero rows' helps.
Regards
Sreenivas -
SBO SQL Query outputs zero values as nulls but need the zeros
Hi all,
I'm having a problem with a query I'm writing in SBO where if the field contents are zero, these are output as null.
I have a field for the stock usage on sales orders and ont too for production orders, but if I add these together they only provide a result if both columns contain a numeric value.
I've tried adding "0" to the column value, adding and subtracting "1" and also multiplying the value by "1" but still no joy.
I have also tried adding a "cast" statement to the column, but that doesnt seem to have an effect either (I think as this is more an output function).
I need to be able to use these columns as separate displays in addition to being used in a further column as part of a calculation.
If anyone has an idea how I can output a true zero value as opposed to a null value your help would be appreciated.
Cheers,
JHello Julian,
You could try to use a CASE Statement as I have shown below and test this will the SQL below. If you use the T0.LineNum without any CASE or CAST the LineNum 0 will show as blank in SAP.
SELECT
CASE WHEN T0.LineNum != 0 THEN CAST(T0.LineNum AS VARCHAR(10)) ELSE '0' END AS 'Row Number',
T0.ItemCode AS 'Item No.', T0.BaseQty AS 'Base Quantity', T0.PlannedQty AS 'Planned Quantity - Rows' FROM [dbo\].[WOR1\] T0 -
Ko88 results in zero value - trying from AuC to Asset (full settlement)
Hi everybody,
I´m getting a zero value doing a settle by KO88 from AUC to a final asset.
Previously i have made the settle for AUC from expense with no ploblem.
The problem is that when i make the settle with KO88 (full settlement option) to pass the value from the AUC to the final asset, the AUC balance is zero and the final assets (2 of them) also show zero. So the money is lost.
Please if anyone can help me, we will appreciate a lot.
Best Regards!This is the error when i try to use the AIAB transaction:
Line item settlement is not possible for asset IA01 38000816 0
Message no. AW050
Diagnosis
You want to carry out line item settlement of an asset under construction. This transaction can only be carried out for assets with active line item management.
However, line item settlement is not active in the asset class of asset 38000816 0 (company code IA01).
If the asset is an asset under construction belonging to an investment measure, then you should carry out the settlement using order or project settlement.
Procedure
Check the setting for 'status of AuC' in the definition of the asset class. -
SRM confirmations result in zero value material documents
We're on SRM 4.0 classic scenario.
We currently have a situation where we create confirmations in SRM but some of them ended up with zero value material documents; therefore, no accounting documents are generated. It also means no accruals are booked for the receipts.
I've compared several 'good' as well as 'bad' confirmations, and can't seem to tell the difference as to what may cause this issue. Does anyone know what may cause the confirmations to lose their price values in R/3?
Your help is appreciated.
SNDear Sreekanth,
Check following things
In SPRO--> PRDn --> rem --> cost object controlling --> Define Default Values for Cost Object Controlling
check for your order type what is the costing variant
and go to OPN2
for that valuation variant what is the stratergy sequence?
based on this setting only the cost for GR is calculating
if the stratergy sequence is 7 valuation price according to price control of material
then check the price contril is it V or S, If its V, whats the price maintained for V -
Dear All
Plz see below comments of Sujay.. can any one tell me is there any other sollution for that? plz note, while i am trying to use 501 MVT with ZSPR there is no FI doccument generated but if i use ROH material, then fi doc generated with value.. why and how it is happening?
plz advice
Subject: Re: maintaining spares returned
Message: As per your mentioned specification what i see is material type ZSPR is a valuated material, so in that case if you doing reverse movement 202 wrt 201 then it should cancel the effect of 10.00 RS, which the system is doing correctly.
Now coming to your question if you want to return the material to your respective store without any valuation, then why don't you do 501 movement.
BRthanks for clarification.
however it will not change the answer in general.
return from user departments are usually done with 202 movement, 501 is usually used for receipts from external vendors without having a PO.
In any case the movements will be valuated with the price in the material master, if the material type is quantity and value managed.
There is only one option to return at zero value: make the field fo external valuation in the movement optional, and try then to enter a zero manually while executing the movement. This will post the movement with no value and reduce the MAP of the material accordingly.
But this is pretty dangerous as you will not really have a control about the use of this field, any user can enter any value and will effect the material prices.
Maybe you are looking for
-
BIP and szending output to a printer
Hi, I am perusing the BIP documentation looking for how to print my report directly to a printer. The only reference I am seeing is to IPP. I must be missing something, because all I need to do is send my output to printers already defined on my serv
-
Can't see Adobe fonts in ID CS6
They're in HD>Library>Fonts. I've even added the relevant font aliases to ID CS6's Fonts folder. I'm referring to Adobe fonts. They appear after Zapfino in Font Book and in assorted Apple programs, and in strict alphabetical order (i.e. A for Adobe)
-
Interference when the Torch is in non-keybord mode
Hello I'd like to know if it is normal that when I do a phone call when the BB Torch is only on screen mode(that means that the keybord is hidden, closed) I have a huge interference a sort of "bzzzzzz" during my call. When during the call I open the
-
How do i build a digital clock in multisim
I need help. I am trying to build a digital clock in multisim. I know some things but not what I need to know. Originally this project was supposed to be a full 12 hour format with minutes and seconds but the instructor decided to make it just the h
-
Hi Sap Gurus if any body has Commissions & Incentives Configuration Document , pls send to my mail id: [email protected] With Best Regards Nina.T Edited by: Nina T on Apr 25, 2008 1:01 PM