MC.9 - Material Number appears for period 06/2007 but not 07/2007

Hi Experts,
Have you encountered the situation whereby in MC.9(S039), the data of a certain Material Number appears for period 06/2007 but not 07/2007
This material# has no stock & movements for 07/2007, but for another material# with the same conditions, there is no problem.
Thanks & Regards
Lawrence

Hello Experts,
i´m having the same issue at my system.
Does anyone know why for a certain material report MC.9 shows balance at some Store Location although it doesn´t have any movements, while for other Store Location it isn´t showed any line, not even with zero values.
I hope somebody can answer this issue.
Thank you very much in advance.
Regards,
cecil

Similar Messages

Material Number mandatory for PR exceptP for Service Purchase Requisition

Hi All,
Our client's new requirement is we need to give material number mandatory for Purchase Requisition. But it should not affect for Service Purchase Requisition (as we don't have material number with material type DIEN. Till now, we were using Acc Assignment Category K and Item Category D with only Short Text description). We have separate document type for Service Purchase Requisition(ZSRV).
In order to make Material number mandatory, in PR, we need to give in "Define Screen Layout at Document Level for PR",right? Is there any way to give, "Material Number Mandatory at Document Type Level"?
Please suggest.
Regards,
rosh

hi sridhar,
Thank you for your answer. So as you said, there is no possibility to make material number as mandatory at DOCUMENT TYPE level through Customzining, right?
Regards,
Rosh

TS1702 my ibooks are appearing on my music playlist, but NOT on ibooks for me to view...how do I resolve this issue?

my ibooks are appearing on my music playlist, but NOT in ibooks for me to read, how do I resolve this issue?

This is a concern amoung many corporate users. It's going to take somekind of policy change with apple.
Enterprise support:
Call enterprise support (866) 752-7753 to create a case ID number

How do I get the Label for a Front Panel Control to appear in the Block Diagram but not on the Front Panel?

How do I get the Label for a Front Panel Control to appear in the Block Diagram but not on the Front Panel? On the Front Panel I am making a complex control that consists of a Slider and a Numerical Input box. Both Controls display the same information and either can be used for Input. When one changs, the other is made to display the same value.
But I only want the Slider to display the Label on the Front Panel, to avoid confusion. On the Block Diagram however, I want both controls to display their Labels so that I know what they are. How do I display the Label for a Control on the Block diagram, but not display its Label on the Front Panel?

No. The Label Visible property is separate for the front panel control label and the block diagram terminal label.
How did you start out with the block diagram's label not being visible? Whenever I drop a control or indicator, the label is always visible on both the FP and BD by default. Maybe there is a LabVIEW option that causes new controls/indicators not to have their labels visible by default, but I have yet to find it. I don't think an item should ever be dropped without the label visible, good LabVIEW coding practice demands that the labels for control terminals on the block diagram be visible so that you know what control or indicator a wire is going to.
That being said, I have seen a lot of VI's posted where the label for the terminal on the BD is not shown (against good programming practice.) I've gone to the BD and right clicked to show the label. Sometimes, the people have an empty label (which will turn off the visibility for both the FP and BD) and I'm forced to add some text of my own into the label so I can figure out what their code is doing. When I add some text to the label, at that time, I find both the BD and FP labels become visible.
Are you dealing with controls that have empty labels to start?
Good programming practices:
1. Always have a name for all of your controls, never use and empty label by deleting the text in the label.
2. Make the labels unique. For example, don't have two controls both called Stop. How do you know quickly know which terminal relates to which control?
3. Always show the labels on the block diagram, so you know the function of a control's terminal. If you want to hide the label on the FP, that's okay.
4. If you want a different label to appear on the FP than whatever you actually called the control, then use the caption. You can hide the label and show the caption. This is useful if you need to programmatically change what the "label" is on the front panel such if you are making an application that needs to change its user interface such as for a foreign language.

HT1473 I am having to recreate my itunes library and do not understand why prior album artwork appeared in my older library but not the new library? Is there some way to scan itunes for missing album artwork?

I am having to recreate my itunes library and do not understand why prior album artwork appeared in my older library but not the new library? Is there some way to scan itunes for missing album artwork?

do you have a strongly recommended default "managed" library (the iPhoto preference to "copy imported items to the iPhoto library is in its checked state) or a referenced library - you have unchecked that option?
It sounds like you have a referenced library and are now experiancing one of the very siginificant drawbacks of a referenced library and one of the many reasons they are strongly not recommended
Also note that iPhoto '11 may use alises in the originals folder as part of the upgrade
It is important that we understand exactly what you have and what is not sorking - what error messages you are getting
You must NEVER make any changes of any sort to the structure of content of the iPhoto library - there are no user servicable parts in it -- and you can not rebuild yoru librtary - only iPhoto ir iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ - can rebuild a library unless you are a SQL programmer and understand the structure that iPhoto uses
LN

My Ipod shuffle appears in itunes on mac but not on windows 7 even though we have the latest update of itunes. We have also tried the other solutions on the apple support site.

My Ipod shuffle appears in itunes on mac but not on windows 7 even though we have the latest update of itunes. We have also tried the other solutions on the apple support site.

Hi reinkristine86!
I know you’ve said that you have tried other suggestions for troubleshooting this issue, so pardon me if you have already seen this article, but have you tried all of the troubleshooting steps listed in the article below?
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

The apple coloured ball keeps appearing in photo elements 13 but not in any other programme. I have the latest IMac with plenty storage and ram

The apple coloured ball keeps appearing in photo elements 13 but not in any other programme including premier elements and organiser. I have the latest IMac with ample storage and ram

I believe I have solved the problem. I have 16mb ram so I went into photo
preferences and raised to 75% what is available for photo
I also reduced the cache from 6 to 2. The last two sessions the coloured
ball has not appeared. Hope this might be usefull to others
Rgds J McBride
On Sun, Jan 25, 2015 at 7:15 PM, Barbara B. <[email protected]>

How to use time capsule for wireless back-up but not internet?

Hello,
I have a tower and recently a laptop at work. The tower is connected to our local network with an ethernet cable and the laptop with wireless. So, the internet connection is fine for both.
I was hoping to use my time capsule to do time machine backups on my laptop. Do you have any advice on how to configure this? I do not want to use the time capsule to extend my Internet, as I believe my work I.T. would prefer to handle all access to their network.
Perhaps there is some documentation about doing this that you could point me to? I have not been able to find it.
Thank you for your help.

Your original question was How to use Time Capsule for wireless back-up but not Internet?
There is no reason for you to connect the tower....or anything else...using Ethernet if your goal remains that same as you stated.
If you are asking if you can backup the Tower using Ethernet, and not wireless, then you can connect the tower to one of the LAN <-> ports on the Time Capsule....not the WAN port.
Yes, it appears to work without plugging into my tower.
Correct, it will work.
I just have to select the network that it created. Of course, I have no access to the Internet while this is happening and it can not auto backup, unless I am on that wireless signal.
As I stated, that is the downside to trying to back up without an Internet connection. You have to establish another network...and backup over that network.
If you are asking if you can stay connected to the work network while also backing up to your non-Internet "private" network, that is not possible.

HT204266 25 apps on my wife's phone need updating and now it "Cannot connect to iTunes Store" only when i try to update them for her. I can access the iTunes store for all other options but not to update. How can I get her updated?

25 apps on my wife's phone need updating and now it "Cannot connect to iTunes Store" only when i try to update them for her. I can access the iTunes store for all other options but not to update. How can I get her updated?

Try quitting the App Store:
Tap the home button to get to the home screen. Then double tap the home button, and hold your finger over the App Store icon. Tap the red when it appears. Tap the home button again to return to the home screen.
Try resetting:
Hold the home and power buttons at the same time until the Apple boot logo appears. No data will be lost.

How can I tell how many licenses are included in a volume license? I can login, but am unable to see the number included, just says purchased "1", but not the amount in the volume.

How can I tell how many licenses are included in a volume license? I can login, but am unable to see the number included, just says purchased "1", but not the amount in the volume.

Hi networka,
Please see this page for links to the resources you can use to manage a volume license: Customer resources | Adobe Buying Programs. You should be able to find this information by logging in to the Licensing Website.
Best,
Sara

USB port Working for my Wireless mouse but not working for another Devices like Flash Memory ?, USB port Working for my Wireless mouse but not working for another Devices like Flash Memory ?

USB port Working for my Wireless mouse but not working for another Devices like Flash Memory ? Anyone can help me plz?

Hi, is this a question" Post?
or are you just offering an insight into your Mouse Issue?
Generally and at times we all have little idiosyncrasies appearing with the running of our Macs.
I use the same Logitech BT with my MBP. MB & iBook..(not at the same time) Only ever had one issue
and the cure was to completely Delete the mouse from BT -> Repair Permissions & Reboot then Re Install the BT mouse..Ihave just put a new set of batteries in the Logitech (only 2nd set ever)...L

I sometimes have blue and red square-shaped dots appear on my MBP; especially but not exclusively when I'm watching videos. The dots don't stay in the same place; and also they are not there all the time.

I sometimes have blue and red square-shaped dots appear on my MBP; especially but not exclusively when I'm watching videos. The dots don't stay in the same place; and also they are not there all the time. Also, sometimes my animations (applications opening, windows being dragged, etc.) will glitch as well. Again, this is not a continual thing; it just happens variously throughout my day. MBP Model A1212, OS X 10.6.8, 2.33 Ghz 3GB RAM.

Did the original songs that do not appear on the car player play in the Music app on the iPod? Sometimes glitches happen and they do not. Also, If y ohave a 5G iPod/iOS 7, purchase songs will show with an cloud icon by them if they are not downloaded if Shall All is turned on in Settings>iTunes and App Store

I'm setting up my new ipad air and it's asking for id and password, but not accepting it. help me

i'm setting up my new ipad air and it's asking for id and password, but not accepting it. help me

If it is asking for an APlle ID password for an ID you do not recognize then you have stumbled upon the Activation Lock feature of IOS7.
Read more about it here:
http://support.apple.com/kb/HT5818

Why does the apps store not accept my ID and password, it works fine to log into this forum and it works for the apple store, but not to log in to buy apps, it just keeps telling me that the id or password is wrong, and I know it isn't

Why does the apps store not accept my ID and password, it works fine to log into this forum and it works for the apple store, but not to log in to buy apps, it just keeps telling me that the id or password is wrong, and I know it isn't

I Just signed in to find the answer to this too. I started having the same trouble today.

Just got a new MacMini. Migrated files using Time Machine. However, now, on Launchpad, I see several Firmware updates that were relevant for the old machine, but not for the new one. How do I get rid of these updates? They won't delete!

Just got a new MacMini. Migrated files using Time Machine. However, now, on Launchpad, I see several Firmware updates that were relevant for the old machine, but not for the new one. How do I get rid of these updates? They won't delete!

Only thing I can think of is trying this Lion trick...
http://www.cultofmac.com/106030/how-to-nuke-lions-launchpad-and-start-over/10603 0/

MC.9 - Material Number appears for period 06/2007 but not 07/2007

Similar Messages

Maybe you are looking for