MC.A and MB51 reports

Hello all,
       We have comparision between the reports MC.A and MB51 with the same selection criteria.
       Can any one please confirm, whether the receipt value calculated in the report MC.A will be equal to the multiplication of the Price available in the material master and quantity received in those dates.
           As we have ran both the reports with the same selection, we have obtained material documents in MB51 for which we have sepeartely calculated Receipts and Issues. Now this values does not seem to be equal to the Value receipt / Issue in the report MC.A. Hence we request to let us know the reasons for the different behaviour of the reports.
thanks & regards
Chaitanya

Hi,
Can you please explain the behaviour of the report MC.A using an example. I would like to know how the field "Valuereceipts" is getting calculated.
thanks & regards
Chaitanya Rayaprolu

Similar Messages

WBS element field blank in MB51 report.

Dear Experts,
I m using ECC 6.00 EHP4, My problem is we issue the project material with movement type 221 Q but in MB51 report if I want to get the output with WBS element with Movement type 221 q data is not showing if I give only movment type 221 Q and WBS field blank than in output screen WBS fileld shown blank please clear me where is the problem..
Neeru

Anyone please...
Neeru Dimri

Stock varation in Mb51 report.

Dear Expert,
System stock & Physically stock not match in MB51 Report.
we have Implement these SAP PP,MM SD,FI Module.
Case : when 1 job is completed then we will get some scrap from this product in Scrap location but in system stock get different & Physical stock is different. Its system Fault or Process Fault. Or Why it happen. Per Day we will get around 2000kg Difference. pls advise what are the possibilities.
e.g. 1.Material code                            - 10000016.
          S.LOC                                       - SD10.
          Mb51 stock                               - 6000 kg.
          But Physical Generated scrap - 8000 kg.
System Stock Difference = 2000Kg.
Regards
Mahendra.

i assume you mean the scrap generated thru the production / process order and the actual quantity which is physically produced are different.
if so check the BOM. you may have to adjust the scrap which may be produced as by product
pl revert in MB51 report, what is the movement type for scrap generated?

Adding Fields in the MB51 Report.

Is it possible to include the customised field captured in MIGO in customised table in MB51 report. And if I want to include such customised field in the output screen of MB51, what i need to do. Please suggest.
Also is it possible to include such customised filed in the selection screen of MB51.

Hi Mathew,
Report RM07DOCS could show all fields of the MM documents. That means the required fields should be EITHER in database table MKPF MM document header OR MSEG MM document item.
Please have a look at the note 357187. There you will find a description how to activate further data fields to be processed in transactions MB51.
In the case these fields are components of an other table the SAP standard has no possibility to process these fields in MB51 after changing the corresponding customizing settings.
Regards
Mauro
Edited by: Mauro Bianchi on Mar 3, 2011 4:02 PM

Modifying MB51 report...help plea...have ur points.

Hi all,
I m adding MATKL field in the selection of MB51 report, when i took matkl in select option and write selection text in the text elements, it is not getting reflect in the output..
eg. select-options matkl for mara-matkl.
text-element->selection-text-> 'Enter material group' -> activate.
This message is not reflecting in the selection screen..
Please help me & have ur points.

Hi all,
When i log on to DE (geman), i m getting selection text.
But when i log on to EN(english), i m getting MATKL.
Pleas help me yaar..
thanx in advance..
reply

MB51 Report

Hi ,
Please suggest me , the WBS element is not appaearing in MB51 report , for 221/222 Q movent types. Where as it is appearing in 101 Mvt type .
Raja

Hi ,
I had tried what u had said, but if i consider my selection criteria as plant ,mvt type , special stock indicator , and posting period. I can see the Wbs element for all the plants across which material doc has been posted. but for some plants it is not appaering, why this is happening. pl suggest.
Rgds,
Raja

Difference between MC.A and MB51

Dear Experts,
Why I am getting different figures for Receipt and Consumption in MC.A and MB51
Thanks

Hi,
Please check the report MB5B .You can down load the report and you can have a comparision for the issues .
and try for RM07MMFI .It wil show a diff if there exists any .Please check the note 32236 for these types of inconsistencies.This is a master note which lead to many.
Regards,

Sorting in 6i and 10g reports

Hello All,
I am running 6i and 10g reports against a 10g database.
I ran one of the 6i report and it generated a report in one sorting ordear
and when i ran the same report on 10g ,it generated the report in ddifferent order.
Both the reports r run against the same 10g database.
The order by clause on the columns of the records r identical.
Now i wanted to understand how it is sorting in different orders in both 6i and 10g reports?
Thanks,
Ranz

Hi,
Please note the fact that 6i Reports is not certified to work with 10g Database. Hence it becomes impossible to address the sorting behavior of 6i Reports, though there is nothing different in the way it works. I would suggest you to use 10gR2 version of Reports services with 10g Database which is certified and supported. Thanks for your understanding.
Regards,
Anand

Crystal report(Can i link sub report and main report Compulsorily) - invalid path

hi.
i need small clarification.
i am developing one Crystal report
main report i took it from rdr1 one table...
report is working fine..
Sub report i took it from inv1 one table.
i have not linked any fields from these tables.
May be it is having links in b1..
but in my other report both the tables.... from main report and sub report does not have any relation.
My Questions is..
Can i Compulsorily link fields to main report...
if both does not have any relation what should i do...
i took two tables.
main report rdr1
sub report inv1...
if i run the report it is asking two parameters one is for sub report and other one for main report working find in crystal report.
but...i want to run the report in b1.
while importing i am getting the error (Plz have a look on below image)
if i choose any other report it is importing fine...
Clearly i am mentioning i dont want to link both tables there is no links between two reports...
in this scenario can develop a report..
I need your Valuable suggestions.
here below u can find my developed sample report...
http://www.megafileupload.com/en/file/544758/NewReport-rpt.html

hi.
If i try only i am getting the error..
out side if i run i am able to run the crystal report but
in b1 i am not able to import the report.
you can also try my report
from below link u can get my simple report.
if u find any mistake what i have done plz inform me..
http://megafileupload.com/en/file/544806/NewReport85-rpt.html

I am not able to launch FF everytime i tr to open it, it says FF has to submit a crash report, i even tried doing that and the report was submitted too, but stiil FF did not start, and the problem still persists, please help me solve this issue in English

Question
I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
'''(in English)'''

Hi Danny,
Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
but not 180, right?
I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
=COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
or
=SUM(IIF(Fields!TICKET_STATUS=4,1,0))
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

Error while running historical and operational reports in OIM 9.1

Hi all,
I had a look at the operational reports and historical reports in OIM 9.1
When I tried to run the reports by supplying the parameters, I see the following behaviors.
a)The reports run as expected and display the information.
b)The moment, I click submit I see a series of exceptions in the Jboss log, the beginning of the thread being....
WARN [TxConnectionManager] Connection error occured: org.jboss.resource.connectionmanager.TxConnectionManager$TxConnectionEventListener@1e7aa15[state=NORMAL mc=org.jboss.resource.adapter.jdbc.xa.XAManagedConnection@6fc757 handles=1 lastUse=1300177838234 permit=true trackByTx=true mcp=org.jboss.resource.connectionmanager.JBossManagedConnectionPool$OnePool@62b4a1 context=org.jboss.resource.connectionmanager.InternalManagedConnectionPool@40ba54 xaResource=org.jboss.resource.adapter.jdbc.xa.XAManagedConnection@6fc757 txSync=null]
java.sql.SQLException: No more data to read from socket
c)The screen just hangs without any error message/report results. When I tried to click any other menu items on the left hand side, none of them responds after the screen is hung.
The only option available is to close the window and reopen the browser again.
It would be great if you could let me know the root cause for scenarios 'b' and 'c'
Looking forward to hearing from you,
Many thanks in advance

Hey guys! 2 days and no replies yet. please help me with this.

UCCX 7.0.1SR5 to 8.0 upgrade while also adding LDAP integration for CUCM - what happens to agents and Historical Reporting data?

Current State:
•    I have a customer running CUCM 6.1 and UCCX 7.01SR5. Currently their CUCM is *NOT* LDAP integrated and using local accounts only. UCCX is AXL integrated to CUCM as usual and is pulling users from CUCM and using CUCM for login validation for CAD.
•    The local user accounts in CUCM currently match the naming format in active directory (John Smith in CUCM is jsmith and John Smith is jsmith in AD)
Goal:
•    Upgrade software versions and migrate to new hardware for UCCX
•    LDAP integrate the CUCM users
Desired Future State and Proposed Upgrade Method
Using the UCCX Pre Upgrade Tool (PUT), backup the current UCCX 7.01 server.
Then during a weekend maintenance window……
•    Upgrade the CUCM cluster from 6.1 to 8.0 in 2 step process
•    Integrate the CUCM cluster to corporate active directory (LDAP) - sync the same users that were present before, associate with physical phones, select the same ACD/UCCX line under the users settings as before
•    Then build UCCX 8.0 server on new hardware and stop at the initial setup stage
•    Restore the data from the UCCX PUT tool
•    Continue setup per documentation
At this point does UCCX see these agents as the same as they were before?
Is the historical reporting data the same with regards to agent John Smith (local CUCM user) from last week and agent John Smith (LDAP imported CUCM user) from this week ?
I have the feeling that UCCX will see the agents as different almost as if there is a unique identifier that's used in addition to the simple user name.
We can simplify this question along these lines
Starting at the beginning with CUCM 6.1 (local users) and UCCX 7.01. Let's say the customer decided to LDAP integrate the CUCM users and not upgrade any software.
If I follow the same steps with re-associating the users to devices and selecting the ACD/UCCX extension, what happens?
I would guess that UCCX would see all the users it knew about get deleted (making them inactive agents) and the see a whole group of new agents get created.
What would historical reporting show in this case? A set of old agents and a set of new agents treated differently?
Has anyone run into this before?
Is my goal possible while keeping the agent configuration and HR data as it was before?

I was doing some more research looking at the DB schema for UCCX 8.
Looking at the Resource table in UCCX, it looks like there is primary key that represents each user.
My question, is this key replicated from CUCM or created locally when the user is imported into UCCX?
How does UCCX determine if user account jsmith in CUCM, when it’s a local account, is different than user account jsmith in CUCM that is LDAP imported?
Would it be possible (with TAC's help most likely) to edit this field back to the previous values so that AQM and historical reporting would think the user accounts are the same?
Database table name: Resource
The Unified CCX system creates a new record in the Resource table when the Unified CCX system retrieves agent information from the Unified CM.
A Resource record contains information about the resource (agent). One such record exists for each active and inactive resource. When a resource is deleted, the old record is flagged as inactive; when a resource is updated, a new record is created and the old one is flagged as inactive.

VS2008/VS2005 and Crystal Reports 2008 Developer

Hi,
1.) I am using VS2008 and Crystal Reports 2008 Developer. Are there any issues I need to consider when developing using both of the above? (or with VS2005)
2.) The confusion for me is in regards to the SDK. From what I understand from articles etc is that using CR 2008 dev we can use the .NET SDK or RAS SDK for development purposes?
3.) So downloaded the sample code for RAS .NET from [here|https://www.sdn.sap.com/irj/boc/businessobjects-samples?rid=/webcontent/uuid/80774579-b086-2b10-db91-ed58c4dda375] and tried "DatabaseLogon_CS" example, as the option. It automatically opened in VS2005 (no problem) however it would not run.
I would get an error :
Failed to connect to server "localhost".
Error returned from Windows Sockets API : 0.
and line causing this is >>> rcd.Open(ref path, 0);
Code below:
        string sampleReportPath = @"C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\Samples\en\Reports\Demonstration\World Sales Report.rpt";
        object path = (object)sampleReportPath;
        // Create an instance of the ReportClientDocument.
        ReportClientDocument rcd = new ReportClientDocumentClass();
        // Set the location of the RAS server.
        rcd.ReportAppServer = "localhost";
        // Use the Open() method of the ReportClientDocument to open the report.
        rcd.Open(ref path, 0);
I have been able to open the RPT file by itself. So it does 'see' the database.
Reason why it would not run?
Any help would be appreciated. Thanks

If you're using the sample code from our website, make sure you have uncommented the InprocRAS option in the ConfigureCrystalReports method (see below). From your error description it seems like you're using the unmanaged RAS option, which requires a RAS server.
private void ConfigureCrystalReports()
        /* The following methods implement the same sample functionality in three different RAS
         * scenarios. Uncomment the method you would like to use.
         * - inprocRAS() logs onto a databse using RAS and SQL authentication.
         * - managedRAS() logs onto a database using RAS and SQL authentication from a managed RAS server.
         * - unmanagedRAS () logs onto a database using RAS and SQL authentication from an unmanaged RAS server.
         * Undocument the call to the method which applies to your appropriate RAS settings.
        DatabaseLogon_inprocRAS();
        //DatabaseLogon_managedRAS();
        //DatabaseLogon_unmanagedRAS();

What is difference between interactive list and interactive reports?

what is difference between interactive list and interactive reports?

hi check this..
interactive report/list means any input(double click or single click or user command ) on the screen will results a new screen with the corresponding fields....this is upto 20 levels only check this..
report .
start-of-selection.
write:/ 'this is the source list'.
at line-selection .
if sy-lsind = 1 .
write:/ ' this is the 1st list'.
elseif.
if sy-lsind = 2 .
write:/ ' this is the 2 list'.
if sy-lsind = 3 .
write:/ ' this is the 3 list'.
if sy-lsind = 4 .
write:/ ' this is the 4 list'.
if sy-lsind = 5 .
write:/ ' this is the 5 list'.
if sy-lsind = 6 .
write:/ ' this is the 6 list'.
if sy-lsind = 7 .
write:/ ' this is the 7 list'.
if sy-lsind = 8.
write:/ ' this is the 8 list'.
if sy-lsind = 9 .
write:/ ' this is the 9 list'.
if sy-lsind = 10 .
write:/ ' this is the 10 list'.
endif.
regards,
venkat

Diff b/w snapshot baselines and AWR reports

Hi All,
Can anyone tell what is the difference b/w snapshot baselines and AWR reports. I have gone through couple of articles and i feel both are same, however given different names.
Am I correct?
Thanks

AWR report is a report comparing the pair of snapshots and thus giving you the details of what has happened between that inerval!
The baselines is that "interesting time period" which you define telling to oracle and is used by oracle to compute the sql response tiime of your db with it in the subsequent timings. So both are completely different actually!
HTH
Aman....

MC.A and MB51 reports

Similar Messages

Maybe you are looking for