'mc.b' standard program zcopy issue

My requirement is to add stock category to standard transaction 'mc.b' selection criteria. I took a zcopy of standard program "RMCB0300" for this tcode. when i execute this code application toolbars are missing ie. "execute buttons etc.. How to fix this ?. Kindly help.
Thanks

So your original question is answered? If so, please close this thread and start a new one with the next question.
This makes it easier for those who search the forum to find specific answers to specific questions.
Rob

Similar Messages

FBL3N standard program to ZCOPY program issue

When I take a ZCOPY of standard program RFITEMGL of transaction code FBL3N and put break point over Function Module FI_ITEMS_DISPLAY and look into the table it_pos the material number and vendor numbers are not getting populated but without taking zcopy if set breakpint over this Function module directly in the standard program the values for material and vendor is getting populated. Kindly why this happens?

This program likely behaves differently based on which transaction is calling it.
Rob

Issue with the Receiving Transaction Processor Standard Program

We are facing issue in the Receiving Transaction Processor Standard Program.
The error description is as below:
RVTII-030: Subroutine rvtiicreate() returned error
Cause: Subroutine rvtiicreate() returned an internal error.
Action: Note this error number and the actions you are trying to perform. Contact your system administrator.
RVTII-077: ORA-01476: divisor is equal to zero
Cause: A SQL error has occurred in RVTII. The SQL error is &LSQL_ERR.
if any once faced this issue earlier and any solution, Please let us know.
Regards,
Krishna

Please see if these docs help.
RMA Receipt Errors With RVTII:077 OE COGS API Returned Error Warehouse NULL [ID 301767.1]
RCVRCERC: RVTII-077: ORA-0146: divisor is equal to zero [ID 1287907.1]
Cost Of Goods Sold Account Generation Failed With Error [ID 406035.1]
RMA Transaction Issues (Troubleshooting) [ID 311208.1]
Thanks,
Hussein

I'm having trouble with My adobe Creative Suite 4 Design Standard programs opening. They will bounce to open but won't open up and eventually I will need to force quit as they aren't responding. I'm thinking it may be a font issue but need some support A

I'm having trouble with My adobe Creative Suite 4 Design Standard programs opening. They will bounce to open but won't open up and eventually I will need to force quit as they aren't responding. I'm thinking it may be a font issue but need some support ASAP!

Nobody can tell you anything without proper system info or other technical details like the crash logs.
Mylenium

Variants issue - Standard program RFEPOJ00 - Upgrade

Hi Experts,
I'm facing an issue with variant created for a standard program. Recently, development system got upgraded to newer version. In old systems I've craeted a variant for program RFEPOJ00, which is working fine. All variants got copied into new system in the process of upgrade. The variant is not working in new system and I'm getting 'Varaint <varaint_name> of program RFEPOJ00 is not the current version' error. Usually, this type error will be displayed when program there is any change in selection screen parameters (type, length, etc.,). But, there are no changes in program as well as in selection parameters.
I can adjust the variant, but I want to know what might be the issue.
Please help me in this.
Thanks in Advance,
Siva Sankar

Run standard SAP program RSVARDOC_610 to bring old variants up to date.
Rob

ZCopy Of a Standard Program

Can someone please guide me on taking a Z Copy of the standard Program GP4QLQKH46VZJ3P1A40A23S3HJG220 .When ever I am taking a ZCopy after two steps it displays a screen "Copy Program GP4QLQKH46VZJ3P1A40A23S3HJG220 to ZC" ,in which there are two columns .
One is Include Name Source column and other is Include Name Target .Values in the Include Name Target have to filled by us .What names should be given here and will it affect the functioning of the orignal Standard Program.
ZC is my target Program.
Please Help urgently.
Moderator message: standard functionality, please search for available information/documentation before asking, do not use the term "urgently" when posting.
Edited by: Thomas Zloch on Dec 3, 2010 12:45 PM

Hi Friend,
When you copy any standard code it porvides you witha option to copy every compent of it liek include ,Varinat ,documentation all that into your porgram so such way standard porgram which you are copying may have some includes which you can copy it to some z**** and then automatically porgram also replaces the place where original include used with the new inlude name in which u have copied
So you can give some Z name and copy it i dont think it will spoil the functinality of original unless you do some thing very differnt and also in that case you shoudl have acess key to change original :).
Regards,
Poornima

GL Account Document not picked by Standard Program

Hi Friends,
I have an issue which is related to GL Accounts
Everyday 5000 odd documents will be Picked by standard program and the GL documents are cumulated to one particular document and it will be sent to another system through idoc.
The issue here is on one particular day one single GL Account document has not been picked by the program and cumulated. Instead that has been picked on next month..
So i need to know what might be the reason for the delay in picking the document for particular day.
Help me with solution in this issue
Thanks in advance
kishore

Thansk for the reply.
I also thought of one reason among the four u specified..But i will stil make it clear to u so that i will get better idea on this issue.
Like in one system all the documents wil be picked and GL account will be posted and through idoc it is sent to another system where the balance should be equal
when i compare two systems one is 4.7 and another is 4.5 version.
In FS10N for all the month the balance is talied for both the systems like the credit ,debit everything gets tallied for the particular document number. But for one particular month there is a diffence only in the credit amount of two systems..The 4.5 system shows some amt less than the total.
But that problem also solved but it got delayed by a month..
Thats the reason this issue arised, Why it took this delay..Could you pls suggest me witht this.
If any kind of prooof is ther to show this might be the reason for client
Thanks
kishore

Error While executing the Standard Program RSEINB00

Hi,
I am trying to execute the Standard Program RSEINB00.
The input parameters for this program are
1. File path along with name
2. Port.
File path I am giving the application server directory along with the filename.
For port. i have created a port in WE21.
For both outbound parametes I selected the Physical directory and gave directory name and file name in both tabs and saved the port definition.
Now I am passing the port to the RSEINB00 program.
it is giving an error File cannot be opened.
Can any one help me on this. Can someone guide me how to use RSEINB00 to read file from application server.
thanks

Hi,
I think,you missed out some steps while creating Port.so please follow the below steps to resolve the issue.
we21->click on your port number->outbound file tab->function module: EDI_PATH_CREATE_MESTYP_DOCNUM.
outbound file: give file name .txt.
and give the physical directory : /usr/sap/.......................................txt and save.
and click on 'ACESS TEST' button and check any error is coming.
go to outbound trigger tab-> give RFC destination name which we have created under a port in SM59.
and one more important thing is check your unicode status is active or not.
.Please get back me .if any issues.
Kiran J

Short dump in standard program

Hi Friends,
below description is short dump for standard program.
Please see the below and help me how to correct the program.
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
Error analysis
Short text of error message:
Internal error: Program   , include   , form   .
Technical information about the message:
Diagnosis
     An unexpected error has occurred.
Procedure
     If you can reproduce the error, contact the SAP Hotline quoting the
     error number.
Message classe...... "GR"
Number.............. 214
How to correct the error
Probably the only way to eliminate the error is to correct the program.
                                                                                You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"MESSAGE_TYPE_X" C
"SAPFGRWE" or "FGRWEF80_F80_FILL_COL_TAB"
"F80_FILL_COL_TAB"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
   To obtain this, select the "Print" function on the current screen.
                                                                                2. A suitable hardcopy prinout of the system log.
   To obtain this, call the system log with Transaction SM21
   and select the "Print" function to print out the relevant
   part.
3. If the programs are your own programs or modified SAP programs,
   supply the source code.
   To do this, you can either use the "PRINT" command in the editor or
   print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
   or which actions and input led to the error.
Thanks & Regards,
Sree
Edited by: adepus on Oct 7, 2009 12:39 PM
Edited by: adepus on Oct 7, 2009 12:39 PM

Hi Clemens,
I am getting a dump error as shown below. Could you please find some resolution for this issue. we just made some changes to the transaction GS02(Just added a GL account to one of the sets).
Runtime Error MESSAGE_TYPE_X
ShrtText
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
Short text of error message:
Internal error: Program , include , form .
Technical information about the message:
Diagnosis
An unexpected error has occurred.
Procedure
If you can reproduce the error, contact the SAP Hotline quoting the
error number.
Message classe...... "GR"
Number.............. 214
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Variable 3.......... " "
Variable 4.......... " "
to correct the error
Probably the only way to eliminate the error is to correct the program.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"MESSAGE_TYPE_X" C
"SAPFGRWE" or "FGRWEF80_F80_FILL_COL_TAB"
"F80_FILL_COL_TAB"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
Source Code
79 MESSAGE x214.
80 ENDIF.
81 PERFORM e08_read_object_index(sapfgsb0)
82 USING fcolumns-dim_index.
83 IF c-subrc 0. MESSAGE x214. ENDIF.
84 c_dsentry = c-tval-from.
85 IF c_dsentry '='.
86 READ TABLE data_fields BINARY SEARCH
87 WITH KEY tab = rep_table
88 dsentry = c_dsentry.
>>>> IF sy-subrc 0. MESSAGE x214. ENDIF.
90 ENDIF.
91 WHEN OTHERS.
92 c_dsentry = '*'.
93 ENDCASE.
94 ENDIF.
Regards,
Pavan

How to find a program which modifies the variant of a standard program?

Hi,
I have an issue where the variant values of the standard program RKEVEXT3 (Transaction : KEFC), is getting changed by a background job.I need to find the program which modifies the values of the variant.
Any input on this will be helpful.
Regards,
Raj

hi Raj,
you can change variants with FM RS_VARIANT_CHANGE. I would suggest to run a where used list for this variant in your system.
hope this helps
ec

Exporting An message Internal table to Standard program Internal Table

Hi,
In T-code VOFM, We have Goods issue routine 113, Now in Custmizing 913 is Configured. we are Checking the status of each handling unit of the Delivery. So I am getting the status Incomeplete Message for Multipe HU's. hence AM storing into One internal Table and Now I want To Export That Internal Table to Standard Program Internal Table 'WAT'.
If I raise

Elaborate your questions Please.

Addition of a new column to the standard program

Hi Friends,
I have a requirement to add a new column Group Key to the existing report a standard program RFD0PR10 and display the fields based on the group key .
The standard program uses methods write _header etc...
can any one guide me in this issue.

hai naveen,
For standard tables, it is possible to add new columns by using either .include or
Append structures. but,it is not possible to change key of the existing of table .
if useful, reward points
bye
G.V.K.Prasad

Error: While Copying Standard Program FBCJ

Dear Experts,
I tried to copy the standard program because the requirement was to change the menu fuction for save and post.
So i copied the T.Code FBCJ to ZFBCJ. It Copied Successfully and i assigned the tcode also. But While executing the T code
the system Shows the error message
"System error in routine FI_TAX_GET_TXJCD_STRUCTURE
error code 1 function builder TAX2"
Kinldy help me to resolve this issue.
Waiting for your valuable replies.
Kindly give some ideas.
Thanks and Regards,
Karthik V
Edited by: karthikani on Nov 24, 2010 10:30 AM

Hi,
are the both client environments hav same version (ECC 6).
In ECC 6 version type X is not allowed.
To avoid this problem,
you need to declare the field of TYPE C.
you need to get the value from Cl_ABAP_CHAR_UTILITIES.
Regards
Sandeep Reddy

How to find out if ENQUEUE_ESRDIRE is used inside a standard program!

Hi All,
I have run VFX3 to rellease billing document using VF02 BDC that is called inside VFX3.
I used debugging to find out in ENQUEUE_ESRDIRE, or ENQUEUE_E_TRDIR is used anywhere in the process.
I also used System Debugging and Break-point at statement functions. But I have not ben stopped at these function modules.
However, I checked using ST05 with enqueue trace enabled, and I found the below entries.
255 ESRDIRE    ENQUEUE     1      0 Excl(***) TRDIR GP3VOFY4EM1BE5DHB1155DUU8H
37 ESRDIRE    DEQUEUE     1      0 Excl(***) TRDIR GP3VOFY4EM1BE5DHB1155DUU8H
My query is how can we debug to a point where these lock objects are used or Do these lock objects are not identified in debug mode but are logged while enqueue trace used i.e., SAP uses internally?
Please help me as this helps me in resolving an issue where locking issue is there that fails to update VFX3 becuase for one user
in SQL trace it is logged as VF02 TRDIR Lock > 6 hours VF02 TRDIR
and for another job "UPD 42 050 BATCHFIN          GZZ K > Obj: ESRDIRE # enxxhead7727" is logged in ST05.
Regards,
Pratyusha

Hi Clemens,
I was unable to trigger the exact point from where this lock object has triggered.
But I am sure that it is a standard SAP process which is locking while releasing the billing documents.
Now my query is why SAP why SAP'S standard program VF02 that is internally called by VFX3 (RVFAKSPE) and that can be submitted in background mode will use ESRDIRE lock whil each time it releases the block?
The problem I am facing is - there are different BATCH jobs and all are for VFX3 with different variant so that no billing document is processed by two different jobs at same time. However the lock entries ENQUEUE_ESRDIRE is creating problem as it is creating locking issue and hence the jobs are processed longer than expected. This is evident from ENQUEUE trace of ST05.
Is VFX3 ( In version 4.5B) is meant for running 1 background job of VFX3 at a time?
Regards,
Pratyusha

Printing the form using output type and Standard program

Hi all,
   I am a beginner on SAP.Now i get a doc for smartforms.
   It need to print a form.And need to create a output.I don't know how to create it and how to use it.
   And how to use the standard program to print the smartfroms.
   Can you give me a thought about that??

Hi steven,
first u copy the standard form and modify as u required.
copy the print program.
after that assign modify form to modified print program using NACE transaction code.
NACE->slect application->go with output types->select suitable one->go with processing routines->select medium->provide modified program name and form name->save the details.
go for view->go for transport.
go with the appropriate transaction suitable to your application.
and provide one existing record->issue out put->go with print
i think it will useful for you.
Reward points if useful.
Thanks,
Usha

'mc.b' standard program zcopy issue

Similar Messages

Maybe you are looking for