Mc inside of urxvt makes system crash

have tried for like 10 times now. Whenever i start mc inside of a urxvt terminal my system crashes. Not even SysRQ is responding.
Fun thing: if i start it inside of screen it works. It also works just fine in xterm.
Any idea what might cause this?

Good grief. I've never used urxvt at all, but my best guess is a graphics problem. Maybe try disabling compositing if you have it turned on, and temporarily switch to the VESA video driver if this is appropriate? Or maybe urxvt has some display options that would help.

Similar Messages

Any keyboard touch makes system crash

Hello,
As soon as I hit any key of the keybord the system crash!
I can only use the guest session without any keybord problem.
Please help...
Retina 15 mid 2012 working

Try starting in Safe Mode and see if the problem still occurs?
Restart holding the "shift" key.
(Expect it to take longer to start this way because it runs a directory check first.)
If this works look in System Preferences > Users & Groups > Login items and delete any third party login items (-), you can always add them back with the (+).

Newly installed Lightroom 4.1 64bit makes system crash when I try to run it.

How do I prevent Lightroom from causing my system to crash?

Moving this discussion to the Photoshop Lightroom forum.
PhilipWeiner do you receive a specific error message? Which operating system are you using? Have you tried installing the Photoshop Lightroom 4.4 update?

System crashes when i use any input field after installing Maverick

Hello all.
I have a 2010 macbook air, and have just installed Maverick OS.
Now every time i go to any input field to type in a web address or apple id, the system crashes
and re-boots. Tried to alter keyboard properties nothing works.
I presume i will have to do a factory re-set, because i can not load any updates because I am asked
for apple ID, which i cant enter because computer crashes... Oh right i mentioned that already ;)
Help advice welcome!
Rgds from frustrated in Sweden!!!!

There was an issue similar to this that was resolved with DAQmx 9.3 update. If you haven't done so already, update the driver to 9.3 and try again. If not, try opening an example (like, say, Hardware I/O->DAQmx->Analog Meas->Voltage->Cont Acq&Graph Voltage-Int Clk-Analog Start.vi), and try running that standard example. If the example works and you still have difficulty with your application, could you post information about your project and what navigational steps you take to make the error occur? Try also opening the VI inside and outside of a project (this would diagnose a symptom of the issue resolved by DAQmx 9.3).
- Regards,
Beutlich

Satellite M40: Win XP install after system crash- ser.number problem

Hello there,
i would like to ask you what shall i do. I bought new toshiba satellite m40 laptop about 5 years ago in London.
There was no Win XP recovery cd (no recovery partition on hdd as well), just cd with toshiba drivers in the box. Now my system crashed.
Took me long time to figure out what it was. (BSOD - "not ACPI compliant") I tried almost everything even HDD format.
Later on i completely dismanteled laptop, cleaned the dust inside and it works again - no BSOD.
Now i need to install my WinXP back. So i downloaded WinXP service pack 3 cd-rom and tried to install it.
It wont take my serial number which i have on a sticker on my toshiba.
Please help me, what shall i do?
I paid for WinXP (system was included in price) and now i cannot use it.

Well, i was in London just few months when i bought that laptop. The guy in the store told me the box include everything - it was the way they got it. I didn't know how it works in London (well except the robb of in an exchange office on victoria train station first day and another one paying for a laptop in Computer store which had branches all around London and the company crashed and did not pay me back) and it was my first (delivered) laptop as well. Of course i asked why there is no Win XP cd (or recovery). I used to have many destops before starting with old good 386@20MHz. I was very well aware that i really need installation cd of windows, do remember loads of system crashes of Win95 and Win98. Maybe somebody took it out of the box, who knows. I am just 100% sure it was not there. So i reconciled myself with it, was a newbee there, didn't want to make problems. My fault. Another one was not buying recovery program (or use of that toshiba recovery creator) to make image of hdd. Those days imaging system was quite a new thing as well-at least for me. Few days ago I tried toshiba support web to find recovery cd, even e-bay, etc. to find and buy it. No chance. I can try to call Toshiba UK support centre, but i guess it will be the same answer.
You wrote your friend has got one as well, is it the type -225 ? Full name of it is: Toshiba satellite m40 -225. Different number means different hardware, but recovery cd of your friend might be compatible. Would it be possible to ask him to give/sale me an image of that disk? Toshiba support in my country cannot provide help or further info, is not comparable with the UK or US one. But thank you guys for answering me anyway! :-) Any idea welcomed.
EDIT: BSOD (not ACPI compliant) is unfortunatelly back, laptop works just in really cold (-10 C) environment. Restoration CD would be logical step to go.

[VIA] Via K7-266 Pro2 - System crashes if use more than 512 MB of memory

Cannot use more than 512 MB of memory or system crashes. After running without a problem for over 2 years with 1 GB of memory installed, system started intermittent crashing, generally after 5 to 30 minutes of use. I worked with the system manufacturer's tech support and they determined that it must be a motherboard problem. I am hoping to find another fix rather than replacing motherboard. System details:
MB: Via K7-266 Pro2 (MS 6380)
OS: MS Windows XP Update 1
Bios: V3.6
I've used Norton Systemworks and Norton Anti-Virus to keep system clean, and SpyBot and Adaware to clean adware
During troubleshooting, we found that it will run with 512 MB of memory without problems, but not with the 1 GB I had installed. My memory was 2 x 256 MB installed with the machine and 512 MB I purchased from Crucial and installed. Computer ran over 2 years with all memory installed without a problem. After the problem started and during troubleshooting, we found that any combination of 512 MB worked fine (either the 2 x 256 MB or the one 500MB chip), apparently in any arrangement of slots. But as soon as I went to higher memory, I was subject intermittent crashes.
Could not ID the source of the crash. It sometimes happened when I was working with a single program open (various programs from IE to Excel to playing at GameSpy), had multiple programs open in background, or even when computer was sitting idle with only the startup programs active.
During troubleshooting we also did a complete re-install of Windows XP, updated the bios to V3.6, and checked bios settings, but the problems persists.
What else could be the problem?

I am beginning to suspect a PSU problem. I neglected to mention in my first post that when the system crashes, it does not freeze but has intermittent reboots.
I ran the memtest86+ test first on the two old sticks of memory then on just the one new 512 MB stick; both passed the test. I also used the Prime95 stress test on both sets, and both ran without incident.
I used PC Alert to report CPU and case temperatures during the stress test. The results maxed at 54 and 41 degrees respectively during the first stress test and 46 amd 39 degrees during the second test (I think part of the difference was due to a lower ambient, room temperature during the second test.) The voltages reported during both tests were similar and were: Vcore1: 1.71v; Vcore2: 1.26v; +5v: 4.76v; 3.3v: 3.31v; +12v: 11.60v; and -12v: 12.60v. I am not sure if that information is meaningful, PCAlert showed all measurements as within the required range.
I periodically have cleaned the dust out of my computer, so I don't think that is the problem.
I used 2 power calculators with major differences in the reported status of the system. The test from pcpowercooling reported minimum and maximum requirements for my system (with the full 1 GB of memory installed) of 300w and 510w. The alternate I found at jscustompcs (from a recent article about power supplies at Extreme Tech) reported a minimuum of 256w (no maximum is calculated with their tool. The two tools had significant differences for memory, CPU, and PCI cards. Off particular relevance to my problem was the difference in memory requirements; Pcpowercooling calculated memory requirements at 8w per 128MGB while jcustompcs used 12.5 per stick, resulting in different totals of 64w vs. 21w. Which is right?
One item that makes me think it is not the PSU, however, is that the problem would occur with the 1 GB of memory while the system was idle, thus I was not using any of the hardware devices. However, I never experienced the problem while using a device (e.g. DVD, CDRW, or tape drive) - either with 500MB or 1GB of memory.
My power unit is a Power Man #FSP 300-60BTV with 300w output, including +3.3v: 28amps; +5v: 30.0 amps; +12v: 15 amps; +5vsb: 20amps; -5v: 0.3amps; -12v: 0.8amps. It also notes max output of +3.3v and +5v of 200amps.
My system also includes a Leadtek nVidia Geforce 3 Ti400 graphics card, DVD, CDRW, HP 14 GB tape drive, 1 case fan, and 4 PCI cards (modem, network, USB2.0, and Audigy 1). The USB card is connected only to a bus in my Dell monitor and I have not used other USB devices.
Any thoughts or suggestions? Do I need to replace the PSU?

System Crashes repeatedly - hard drive issue?

I've been using my G4 933MHz with 2 internal hard drives for quite some time. I started having issues with the system crashing, while the system drive made a binding or poer up/down sound repeatedly. The drives were stacked on top of one another, so I bought a new cable and separated the 2 drives so they are now side by side. I thought maybe it was happening because they were getting too hot or something. The system worked for a few weeks, but is now back to having the same problem.
I've run both the Apple Disk utility and Tech Tool Pro and neither really come up with any problems. The Apple disk utility used to have issues seeing the drives right after a crash. Now it either sees them and says no fix needed or it doesnt see either drive at all.
Tech Tool Pro used to see both drives and all tests ran successfully. Now, I pretty much get a hardware nor supprted message each time I run it. At first I thought my system drive was the problem, but now I'm not sure. The fact that neither drive shows up in the disk utility makes me wonder if there is not some bigger problem. Both drives work perfectly fine sometimes. If I boot up a few times, they eventually show up and everything works fine for about 10-15 minutes, but eventually it crashes again.
Has anyone encountered this problem before? Or have insight into what might be wrong and how I could fix it? Or are there any other tests I can run, besides the normal hard drive tests? I'd just hate to go spend the money on a new hard drive to find out that my drives are fine and it's the system itself that is the problem. Any help is greatly appreciated.
By the way, the second drive is almost identical to the drive that came with the computer. I bought it from a mac dealer and it is the same brand.
Thanks,
Wil

They're both on the same ide cable. It's been setup this way for quite some time. One drive is setup as a master, the other as a slave. Never had any problems for the past couple of years. Issue just started about a month ago. Don't recall anything that may have triggered it. Just one night when I was sitting there, the whole thing froze. Ever since then, it has been freezing sporatically. Now it's doing it about every 2 minutes from when I get it booted up...if I can even get it to boot. Most of the time it just sits on a grey screen, then goes to the blinking folder with the system face and question mark, then after about 20 seconds of that, it eventually boots into the system drive and freezes or boots to the cd. It's completely random from what I can tell, as to which happens.

Total system crash caused by/during FF 6.0.1 update

Here on rock stable Windows 7 64bit SP1 (Dutch).
At 19:00 hrs (local time) today I was surfing normally when suddenly my mouse-pointer froze. Duration was a few seconds and then suddenly a complete black screen. No matter what I did, nothing happened. Only a message from my monitor that there was no signal. My PC was still on but no HDD activity or whatever. Had to do a hardware reset (first time since I have Windows 7).
After a restart in Safe Mode (just to be sure), I did normal restart and all was fine again but still no clue on what happened.
Did check log files and did see that at the moment of the crash FF had been updated to 6.0.1. And sure enough, when I started FF, I got the screen with info on the new build.
All is fine now, was just the 1 crash. Somehow the update caused a total system crash.

Looks like its been fixed for me, not by 6.0.1 but by - Todd Siechen from http://www.dvdthemepak.com
Check out his post at:
http://discussions.apple.com/thread.jspa?threadID=335417
Todd... I love you xxx
After having a nightmare since first day of version 6.0.0 and still no fix after 6.0.1, even after Apple requested the files... You fixed my problem... Checked for duplicate fonts and found about 5, selected "Resolve Duplicates" and everything great, even with old projects... You should work for Apple!
Check out the 2 posts:
http://discussions.apple.com/thread.jspa?threadID=313109
http://discussions.apple.com/thread.jspa?threadID=366383
1) The first and biggest culprit we found to be causing problems is with font issues. In order to alleviate this problem, open Font Book and make sure all the Fonts that are turned on have no dots next to them. If they do then select them and select "Resolve Duplicates" from the Edit menu. If you are using a different font manager then use whatever tool is available to make sure no duplicate fonts are loaded. iDVD 6 is very sensitive to this.
Many many many many many many many many many many many many many thanks.
Regards,
Charles Teton
United Independent Pictures Ltd.
http://www.makingmymovie.com

When i try to load certain page, the system crashed and the bottom panel states " stopped" but when I close and open firefox again,it can't and I get this message that says my firefox is still running and to open the browser i need to restart the compu

while browsing suddenly the system crashed and the bottom panel says " stopped".When closed and re-opened, I got a prompt that says firefox is still running and i have to close to open again or have to restart the computer but it doesn't work
== This happened ==
Every time Firefox opened
== just happened

You get message "firefox is still running" and computer restart doesn't help you. Try the advice below.
Make sure Firefox isn't running (end firefox.exe process in Task Manager or restart computer)
Find your profile folder
C:\Documents and Settings\USERNAME\Application Data\Mozilla\Firefox\Profiles\xxxxxxxx.default
find file "parent.lock" in it and delete it (the file is empty, its function is to signify to Firefox whether it's already open or not).
Then try to open Firefox again. Will it start or not? What will it say?

ASE instance not available *** ERROR:ASE instance possibly left running when system went down(system crash?). Notify Database Administrator

Hi Gurus,
I made some changes in rz10 for client copy like:
icm/host_name_full [email protected]
login/accept_sso2_ticket 1
login/create_sso2_ticket 2
icm/server_port_1
PROT=HTTPS,PORT=443$$,PROCTIMEOUT=600,TIMEOUT=600
icm/server_port_0
PROT=HTTP,PORT=80$$,PROCTIMEOUT=600,TIMEOUT=600
login/no_automatic_user_sapstar 0
After to make changes effective, i stopsap & startsap.
But unfortunately db is not coming up. I checked startdb.log it showing
error as " ASE instance not available
*** ERROR:ASE instance possibly left running when system
went down(system crash?).
Notify Database Administrator."
Please help us to resolve this issue, i have also added startdb.log for
your reference.
Regards,
Piyush

Hi Piyush,
Did you solved this issue.
We are facing the same issue and only this thread is there in SCN for this issue.
If you solved this issue,Kindly share the solution.
Thanks and Regards,
Mathan A

MDNSReporter causing system crash

Ever since upgrading to 10.5.7, I've had frequent, daily system crashes. I did an archive and install from the disks, then used the combo updater to 10.5.7. The console logs show that just prior to every crash, I have a lot of activity regarding the mDNSReporter for a few seconds. Any suggestions on what might be causing this? Currently I think it may be Little Snitch (2.1.4) interacting with something else, so i plan to disable it for a while and see if I stop crashing. Logs are posted below.
6/6/09 11:39:00 AM mDNSResponder[16] CheckNATMappings: Failed to allocate port 5350 UDP multicast socket for NAT-PMP announcements
6/6/09 11:39:00 AM mDNSResponder[16] mDNSPlatformUDPSocket: SetupSocket 5350 failed error -1 errno 48 (Address already in use)
6/6/09 11:39:00 AM mDNSResponder[16] CheckNATMappings: Failed to allocate port 5350 UDP multicast socket for NAT-PMP announcements
6/6/09 11:39:01 AM mDNSResponder[16] mDNSPlatformUDPSocket: SetupSocket 5350 failed error -1 errno 48 (Address already in use)
6/6/09 11:39:01 AM mDNSResponder[16] CheckNATMappings: Failed to allocate port 5350 UDP multicast socket for NAT-PMP announcements
6/6/09 11:39:01 AM mDNSResponder[16] mDNSPlatformUDPSocket: SetupSocket 5350 failed error -1 errno 48 (Address already in use)
6/6/09 11:39:01 AM mDNSResponder[16] CheckNATMappings: Failed to allocate port 5350 UDP multicast socket for NAT-PMP announcements
6/6/09 11:39:02 AM mDNSResponder[16] mDNSPlatformUDPSocket: SetupSocket 5350 failed error -1 errno 48 (Address already in use)
6/6/09 11:39:02 AM mDNSResponder[16] CheckNATMappings: Failed to allocate port 5350 UDP multicast socket for NAT-PMP announcements
6/6/09 11:39:02 AM mDNSResponder[16] mDNSPlatformUDPSocket: SetupSocket 5350 failed error -1 errno 48 (Address already in use)
6/6/09 11:39:03 AM mDNSResponder[16] CheckNATMappings: Failed to allocate port 5350 UDP multicast socket for NAT-PMP announcements
6/6/09 11:39:03 AM mDNSResponder[16] mDNSPlatformUDPSocket: SetupSocket 5350 failed error -1 errno 48 (Address already in use)
6/6/09 11:39:03 AM mDNSResponder[16] CheckNATMappings: Failed to allocate port 5350 UDP multicast socket for NAT-PMP announcements
6/6/09 11:39:04 AM mDNSResponder[16] mDNSPlatformUDPSocket: SetupSocket 5350 failed error -1 errno 48 (Address already in use)
6/6/09 11:39:04 AM mDNSResponder[16] CheckNATMappings: Failed to allocate port 5350 UDP multicast socket for NAT-PMP announcements
6/6/09 11:39:04 AM mDNSResponder[16] mDNSPlatformUDPSocket: SetupSocket 5350 failed error -1 errno 48 (Address already in use)
6/6/09 11:39:05 AM mDNSResponder[16] CheckNATMappings: Failed to allocate port 5350 UDP multicast socket for NAT-PMP announcements
6/6/09 11:39:05 AM mDNSResponder[16] mDNSPlatformUDPSocket: SetupSocket 5350 failed error -1 errno 48 (Address already in use)
6/6/09 11:39:05 AM mDNSResponder[16] CheckNATMappings: Failed to allocate port 5350 UDP multicast socket for NAT-PMP announcements
6/6/09 11:39:06 AM mDNSResponder[16] mDNSPlatformUDPSocket: SetupSocket 5350 failed error -1 errno 48 (Address already in use)
6/6/09 11:39:06 AM mDNSResponder[16] CheckNATMappings: Failed to allocate port 5350 UDP multicast socket for NAT-PMP announcements
6/6/09 11:39:06 AM mDNSResponder[16] mDNSPlatformUDPSocket: SetupSocket 5350 failed error -1 errno 48 (Address already in use)
6/6/09 11:39:07 AM mDNSResponder[16] CheckNATMappings: Failed to allocate port 5350 UDP multicast socket for NAT-PMP announcements
6/6/09 11:39:07 AM mDNSResponder[16] mDNSPlatformUDPSocket: SetupSocket 5350 failed error -1 errno 48 (Address already in use)
6/6/09 11:39:08 AM mDNSResponder[16] CheckNATMappings: Failed to allocate port 5350 UDP multicast socket for NAT-PMP announcements
6/6/09 11:39:08 AM mDNSResponder[16] mDNSPlatformUDPSocket: SetupSocket 5350 failed error -1 errno 48 (Address already in use)
6/6/09 11:39:08 AM mDNSResponder[16] CheckNATMappings: Failed to allocate port 5350 UDP multicast socket for NAT-PMP announcements
6/6/09 11:39:09 AM mDNSResponder[16] mDNSPlatformUDPSocket: SetupSocket 5350 failed error -1 errno 48 (Address already in use)
6/6/09 11:39:09 AM mDNSResponder[16] CheckNATMappings: Failed to allocate port 5350 UDP multicast socket for NAT-PMP announcements
6/6/09 11:39:09 AM mDNSResponder[16] mDNSPlatformUDPSocket: SetupSocket 5350 failed error -1 errno 48 (Address already in use)
6/6/09 11:39:10 AM mDNSResponder[16] CheckNATMappings: Failed to allocate port 5350 UDP multicast socket for NAT-PMP announcements
6/6/09 11:39:10 AM mDNSResponder[16] mDNSPlatformUDPSocket: SetupSocket 5350 failed error -1 errno 48 (Address already in use)
6/6/09 11:39:10 AM mDNSResponder[16] CheckNATMappings: Failed to allocate port 5350 UDP multicast socket for NAT-PMP announcements
6/6/09 11:39:11 AM mDNSResponder[16] mDNSPlatformUDPSocket: SetupSocket 5350 failed error -1 errno 48 (Address already in use)
6/6/09 11:39:11 AM mDNSResponder[16] CheckNATMappings: Failed to allocate port 5350 UDP multicast socket for NAT-PMP announcements
6/6/09 11:39:12 AM mDNSResponder[16] mDNSPlatformUDPSocket: SetupSocket 5350 failed error -1 errno 48 (Address already in use)
6/6/09 11:39:12 AM mDNSResponder[16] CheckNATMappings: Failed to allocate port 5350 UDP multicast socket for NAT-PMP announcements
6/6/09 11:39:12 AM mDNSResponder[16] mDNSPlatformUDPSocket: SetupSocket 5350 failed error -1 errno 48 (Address already in use)
6/6/09 11:39:13 AM mDNSResponder[16] CheckNATMappings: Failed to allocate port 5350 UDP multicast socket for NAT-PMP announcements
6/6/09 11:39:13 AM mDNSResponder[16] mDNSPlatformUDPSocket: SetupSocket 5350 failed error -1 errno 48 (Address already in use)
6/6/09 11:39:13 AM mDNSResponder[16] CheckNATMappings: Failed to allocate port 5350 UDP multicast socket for NAT-PMP announcements
6/6/09 11:39:14 AM mDNSResponder[16] mDNSPlatformUDPSocket: SetupSocket 5350 failed error -1 errno 48 (Address already in use)
6/6/09 11:39:14 AM mDNSResponder[16] CheckNATMappings: Failed to allocate port 5350 UDP multicast socket for NAT-PMP announcements
6/6/09 11:39:14 AM mDNSResponder[16] mDNSPlatformUDPSocket: SetupSocket 5350 failed error -1 errno 48 (Address already in use)
6/6/09 11:39:14 AM mDNSResponder[16] CheckNATMappings: Failed to allocate port 5350 UDP multicast socket for NAT-PMP announcements
6/6/09 11:39:15 AM mDNSResponder[16] mDNSPlatformUDPSocket: SetupSocket 5350 failed error -1 errno 48 (Address already in use)
6/6/09 11:39:15 AM mDNSResponder[16] CheckNATMappings: Failed to allocate port 5350 UDP multicast socket for NAT-PMP announcements
6/6/09 11:39:15 AM mDNSResponder[16] mDNSPlatformUDPSocket: SetupSocket 5350 failed error -1 errno 48 (Address already in use)
6/6/09 11:39:16 AM mDNSResponder[16] CheckNATMappings: Failed to allocate port 5350 UDP multicast socket for NAT-PMP announcements
6/6/09 11:39:16 AM mDNSResponder[16] mDNSPlatformUDPSocket: SetupSocket 5350 failed error -1 errno 48 (Address already in use)
6/6/09 11:39:16 AM mDNSResponder[16] CheckNATMappings: Failed to allocate port 5350 UDP multicast socket for NAT-PMP announcements
6/6/09 11:39:17 AM mDNSResponder[16] mDNSPlatformUDPSocket: SetupSocket 5350 failed error -1 errno 48 (Address already in use)
6/6/09 11:39:17 AM mDNSResponder[16] CheckNATMappings: Failed to allocate port 5350 UDP multicast socket for NAT-PMP announcements
6/6/09 11:39:17 AM mDNSResponder[16] mDNSPlatformUDPSocket: SetupSocket 5350 failed error -1 errno 48 (Address already in use)
6/6/09 11:39:17 AM mDNSResponder[16] CheckNATMappings: Failed to allocate port 5350 UDP multicast socket for NAT-PMP announcements
6/6/09 11:39:18 AM mDNSResponder[16] mDNSPlatformUDPSocket: SetupSocket 5350 failed error -1 errno 48 (Address already in use)
6/6/09 11:39:18 AM mDNSResponder[16] CheckNATMappings: Failed to allocate port 5350 UDP multicast socket for NAT-PMP announcements
6/6/09 11:39:19 AM mDNSResponder[16] mDNSPlatformUDPSocket: SetupSocket 5350 failed error -1 errno 48 (Address already in use)
6/6/09 11:39:19 AM mDNSResponder[16] CheckNATMappings: Failed to allocate port 5350 UDP multicast socket for NAT-PMP announcements
6/6/09 11:39:19 AM mDNSResponder[16] mDNSPlatformUDPSocket: SetupSocket 5350 failed error -1 errno 48 (Address already in use)
6/6/09 11:39:20 AM mDNSResponder[16] CheckNATMappings: Failed to allocate port 5350 UDP multicast socket for NAT-PMP announcements
6/6/09 11:39:20 AM mDNSResponder[16] mDNSPlatformUDPSocket: SetupSocket 5350 failed error -1 errno 48 (Address already in use)
6/6/09 11:39:20 AM mDNSResponder[16] CheckNATMappings: Failed to allocate port 5350 UDP multicast socket for NAT-PMP announcements
6/6/09 11:39:21 AM mDNSResponder[16] mDNSPlatformUDPSocket: SetupSocket 5350 failed error -1 errno 48 (Address already in use)
6/6/09 11:39:21 AM mDNSResponder[16] CheckNATMappings: Failed to allocate port 5350 UDP multicast socket for NAT-PMP announcements
6/6/09 11:39:21 AM mDNSResponder[16] mDNSPlatformUDPSocket: SetupSocket 5350 failed error -1 errno 48 (Address already in use)
6/6/09 11:39:22 AM mDNSResponder[16] CheckNATMappings: Failed to allocate port 5350 UDP multicast socket for NAT-PMP announcements
6/6/09 11:39:22 AM mDNSResponder[16] mDNSPlatformUDPSocket: SetupSocket 5350 failed error -1 errno 48 (Address already in use)
6/6/09 11:39:22 AM mDNSResponder[16] CheckNATMappings: Failed to allocate port 5350 UDP multicast socket for NAT-PMP announcements
6/6/09 11:39:23 AM mDNSResponder[16] mDNSPlatformUDPSocket: SetupSocket 5350 failed error -1 errno 48 (Address already in use)
6/6/09 11:39:23 AM mDNSResponder[16] CheckNATMappings: Failed to allocate port 5350 UDP multicast socket for NAT-PMP announcements
6/6/09 11:39:23 AM mDNSResponder[16] mDNSPlatformUDPSocket: SetupSocket 5350 failed error -1 errno 48 (Address already in use)
6/6/09 11:39:24 AM mDNSResponder[16] CheckNATMappings: Failed to allocate port 5350 UDP multicast socket for NAT-PMP announcements
6/6/09 11:39:24 AM mDNSResponder[16] mDNSPlatformUDPSocket: SetupSocket 5350 failed error -1 errno 48 (Address already in use)

Shams Shirley,
The link you gave points directly to the one I gave you.
If you follow [the link I gave you|http://openradar.appspot.com/radar?id=3406], you'll see that it gives a diff to apply as a workaround. One other way to make the problem in mDNSReporter go away is to put your Mac on the internet side of your router.
You should know that [portmap|http://developer.apple.com/documentation/Darwin/Reference/ManPages/man8/portmap .8.html] is built into OS X, as is the [kill|http://developer.apple.com/documentation/Darwin/Reference/ManPages/man1/kill.1. html] command.
Yes, finding and removing the conflicting app that opens up UDP ALL-SYSTEMS.MCAST.NET:5350 with SO_REUSEPORT would take care of the issue. What do you see when you run [netstat|http://developer.apple.com/documentation/Darwin/Reference/ManPages/man1/netstat .1.html] with the -g (multicast) switch?
-Wayne

System crash after recent update

Hi all,
As of yesterday, my laptop has started crashing after a little while open (sometimes right away, sometimes ten minutes in, sometimes right after bios). I believed it was to do with the recent alsa-utils update and I downgraded that package which helped for a little bit. When it updated again and the core dump from the previous update disappeared, I upgraded and the problem starting happening again. Then I downgraded and no change.
So I think it is not to do with alsa anymore...but I can find no information at all in dmesg or journalctl. There seem to be no errors, warnings whatsoever. I have tried chrooting in and looking at all the logs but to no avail.
The update that broke my system installed the following:
alsa-lib alsa-utils gcc-libs gcc isl kmod libcdio-paranoia pyalpm namcap
I have since downgraded both isl and kmod and it looks my laptop is running okay so far. After this update I also updated the kernel, but running from the fallback initramfs did not change the issue so I don't think it was that either.
I have trawled the forums for recent problems with recent updates .ut did not find anything apart from the alsactl core dump.
Does anyone know if there are any problems with the above packages? Or if there are other important logs other than journactl, dmesg, and pacman.log I can try looking at to troubleshoot this? I apologise for not being able to provide much more information, as I said I can't seem to find anything out of the ordinary in the aforementioned logs.
Any help would be appreciated.

Crash still occurs...now found this in dmesg
[ 2.425173] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20121018/utaddress-251)
[ 2.425179] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.425250] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251)
[ 2.425254] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.425258] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[ 2.425260] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.425261] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[ 2.425263] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.425264] lpc_ich: Resource conflict(s) found affecting gpio_ich
I have looked online about these though, and so far it looks like it doesn't actually make anyone crash
EDIT: Also found that this is not actually a kernel bug...hmm.
Last edited by thesystematic (2013-04-16 00:51:03)

Imatch causes system crashes

After installing iMatch my memory seems te be fully loaded and hangs. I have a 24" early 2009 iMac with 8GB internal memory, no running other applications.
I already tried to throw away the iTunes library and startes importing the XML data again, but also the systems crashes. Then I tried te recover systems rights, also a hangup. Tried te start the save mode, no way it works. It is NOT the harddisk, because the systems starts when I login as another user.
Today I called Apple, but the won't give support on the because there is no Apple Care anymore !!! ***. The sold me iMatch last week, they screw up my system and then they sent you away with this unproper answer. I told her that I pay her salary, 4 iPhones at this house, 2 iPads, iMac, Macbook Pro, Apple TV, Macbook and the only thing Apple produces is a simple answer while referring to internal procedures.
Who can help me? I live in Amersfoort, Holland.
I install 10.7.3 and I hope that the bugs are sneaky solved by this update.....

This definitely does not sound like iTunes Match, suggest the following:
1. Make a Secure Backup of your Song files;
2. Restart computer from cold;
3. Re-install latest version of iTunes;
4. Start iTunes with Option key held down - select option to create new library;
5. Import your Song files from your secure backup into your new library.
At this point you should have a stable fully functioning system. From here, take a further secure backup of the full library, incldung the Song files - start iTunes Match - allow the 3-step process to complete (can take from few hours to few days). At this point you can begin to enable further devices, suggesting starting with computers and moving onto ipod / ipad / iphone etc.
Do let us know how it works out.

System crash attempting to use the packet filtering on Solaris 10, MU7

I have been attempting to port my kernel module to run on Solaris 10, MU7 (from MU6). Some changes to the packet filtering hooks interface requires me to make code changes and linker option changes i.e -Nmisc/neti -Nmisc/hook
I now have my module loading successfully and "hooking" packets. However, I am seeing instability and after processing in the order of 100-200 packets the system crashes. See stack dump beow for details.
Also note that initially my callback hook function is very simple i.e returns 0.
I require assistance on identifying the root cause. The key code fragements are as follows:
int _init()
// allocated a control block using net_instance_alloc
// populated the nin_name, nin_create, nin_destroy, and nin_shutdown fields with valid callback functions
// registered the control block using net_instance_register
static int _attach(dip, cmd)
dev_info_t *dip;
ddi_attach_cmd_t cmd;
// initialised a hook control block using HOOK_INIT
// performed a protocol lookup (using net_protocol_lookup) on the net_id provided by the nin_create function callback
// registered the hook with the net_id protocol using net_hook_register
static int
myipf_hook4_in (hook_event_token_t tok, hook_data_t info, void *arg) {
// simple callback function for test purposes
return 0;
System Stack trace:
Boot device: /virtual-devices@100/channel-devices@200/disk@0:a File and args:
SunOS Release 5.10 Version Generic_139555-08 64-bit
Copyright 1983-2009 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
Hostname: bfs-t5440-03-ldm12
NIS domain name is bfs.nis
Reading ZFS config: done.
bfs-t5440-03-ldm12 console login:
panic[cpu9]/thread=2a100a67ca0: BAD TRAP: type=9 rp=2a100a67630 addr=7b6e8d48 mmu_fsr=0
sched: trap type = 0x9
addr=0x7b6e8d48
pid=0, pc=0x7b6e8d48, sp=0x2a100a66ed1, tstate=0x1606, context=0x0
g1-g7: 1910, 18b0, 2a100a678f0, 60010776b14, 1910, 0, 2a100a67ca0
000002a100a67350 unix:die+9c (9, 2a100a67630, 7b6e8d48, 0, 2a100a67410, 182b400)
%l0-3: 000000000100954c 0000000000000009 0000060020ac1620 00000000010523ac
%l4-7: 00000000018a3c78 0000060020ac1848 000003000481dbe0 00000000010ac400
000002a100a67430 unix:trap+6cc (2a100a67630, 10000, 0, 0, 30004028000, 2a100a67ca0)
%l0-3: 0000000000000000 000000000185b480 0000000000000009 0000000000000000
%l4-7: 0000000000000000 0000000000000000 0000000000001606 0000000000010200
000002a100a67580 unix:ktl0+64 (300014c8e40, 2a100a67890, 600114fb428, 3, 1, 0)
%l0-3: 0000030004028000 0000000000000048 0000000000001606 0000000001021604
%l4-7: 00000000003c0000 0000000000000001 0000000000000000 000002a100a67630
000002a100a676d0 hook:hook_run+7c (30001b039c0, 300014c8e40, 2a100a67890, 60012566ea8, 7b6e8d48, 1)
%l0-3: 0000030001b039c8 00000600117df3c0 0000000001878888 0000000000000000
%l4-7: 0000000000000000 000000000000003c 0000000000000000 0000000000000000
000002a100a67780 ip:ip_input+3b4 (0, 600135ca040, 0, 6001359bc28, 0, 0)
%l0-3: 0000000000000000 0000000000000000 0000000000000000 0000060011562000
%l4-7: 00000000e0000000 0000000000000001 0000000000000000 0000000000000000
000002a100a67910 dls:soft_ring_drain+78 (600135d1f00, 60011dfa940, 2, 2000000, 2, 0)
%l0-3: 0000000000000000 0000000000000000 0000000000000004 0000000000000005
%l4-7: 000006001359bc28 00000600135ca040 000000007be1c238 000000000000fffe
000002a100a679c0 dls:soft_ring_worker+64 (600135d1f00, 0, 2, 600135d1f4c, 0, 2a100a67a8a)
%l0-3: 000002a100a67a88 0000000000000000 000002a10001fca0 000002a10001fca0
%l4-7: 0000000000000002 0000000000000000 0000000000000002 00000000018f1000
syncing file systems... [1] 104 [1] 95 [1] 4 [1] 4 [1] 4 [1] 4 [1] 4 [1] 4 [1] 4 [1] 4 [1] 4 [1] 4 [1] 4 [1] 4 [1] 4 [1] 4 [1] 4 [1] 4 [1] 4 [1] 4 [1] 4 [1] 4 [1] 4 done (not all i/o completed)
dumping to /dev/dsk/c0d0s1, offset 644284416, content: kernel
100% done: 118970 pages dumped, compression ratio 10.00, dump succeeded
rebooting...
Resetting...
-eugene
Edited by: emonagh on Aug 25, 2009 1:54 AM
Edited by: emonagh on Aug 25, 2009 1:56 AM

I have checked weblogic download link.
Currently webloigc is only available only for below mentioned platforms:-
1. Windows (32 bit jvm)
2. Linux (32 bit jvm)
3. sun solaris (only SPARC) (32 bit JVM)
There is no generic installer available for weblogic 9.2
Thus what I want is weblogic 9.2 setup for x86 machine.
I have tried to run weblogic 9.2 setup for linux on sun solaris x86.
But it did not run, it also gave error message that some package is missing in /lib/.. folder.....

I get error box THot2nd Window; message is cannot open powrprof.dll. system crashes

I have a Toshiba Tecra running XP professional Service Pack 3.
I was using Firefox and now have Chrome just installed. Problem occurs with both.
I routinely use GFI Viper - deep scan clear
Yesterday I installed MS Security Essentials - clear
I down loaded MS safety Scanner - clear
What happens - After 1-2 hrs running the system makes the 'somethings wrong' sound and the THot2nd Window with the powrprof.dll.......message appears. This happens repeatedly . There is a box that says the system has crashed and the program will be terminated. As I try to close these boxes more appear until there is a Unresponsive Program box appears and I click end now. Then when I click Start to shut down I am prompted to log off [which I dont usually see]. Either clicking logoff or cancel or x-ing out has no effect. Eventually the system restarts.

Tecra A10 (PTSB0A-002001)
Downloads here.
Your thread in Microsoft Answers..
   I get THot2nd window saying Cannot load POWDProf.dll and system crashes
   Bug Check 0x50: PAGE_FAULT_IN_NONPAGED_AREA
   Faulting Driver: win32.sys
Did the blue screen occur during a shutdown?
Please attach the corresponding *.dmp file from the C:\Windows\Minidump folder.
You've done lots of things you did not report to us. Among them, you did this one wrong. So let's start here.
I did as instructed re sfc.exe and there was a momentary small black screen then it disappeared.
So run sfc /scannow properly, which is at the command prompt.
   Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
-Jerry
Attachments:
UserGuide.pdf ‏4315 KB
PTSB0A-002001.pdf ‏673 KB

Mc inside of urxvt makes system crash

Similar Messages

Maybe you are looking for