MC371 not detect hard drive when install Windows 7

I use bootcamp to install Windows 7 on my Macbook Pro 15" core i5 Mid 2010. But when i boot from windows 7 installation disk, i receive "no drive was found". I think this is sata hard drive problem, any ideas or support?!

I change another windows 7 installation disc but it still get error "no drives were found". MC371 use Toshiba MK3255GSXF hard drive instead of Hitachi Hard drive as usual. Help!!!

Similar Messages

I just purchased the Mac Mini Server with the intention of replacing Lion Server with Lion for the first hard drive while installing Windows 7 thru Bootcamp on the second hard drive. Is it possible for me to do this? Thanks.

I just purchased the Mac Mini Server with the intention of replacing Lion Server with Lion for the first hard drive while installing Windows 7 thru Bootcamp on the second hard drive. Is it possible for me to do this? Thanks.

I would use Parallels or VMWare and use the second drive to hold the virtual machine. That way the VM only uses the space that it needs and you can still use the remainder of the drive for other things, not to mention that you would not need to reboot to run windows.
Also Time Machine does not back up a boot camp partition.

HP dv4t not detecting hard drive, please help!

Hello, its been just a little over a year since I've bought my HP dvt, and of course the problems start as soon as my warranty has ended.. It's been working fairly fine most of the year, and then just all of a sudden while not even doing anything of importance on computer last week I got a blue screen error..
Ever since then I have had so much problems. At first it just started out with closing the screen and reopening it crashed the laptop in a couple minutes..
The main problem now is, it just does not detect the hard drive when booting up! Sometimes (rarely) it does though.. I thought it was a windows problem, so I did fresh clean install of Windows 7 and reformatted the hard drive. Then I ran CHKDSK and it did it stuff and said volume clean at the end.. It worked perfectly for a couple of hours, was able to close screen and open with no problems. I downloaded "Hard drive sentinel" to monitor my hdd health, and it said 90% which is apparently excellent. Yet as I was installing adobe reader, it crashed, got the blue screen of death and has not been able to boot up since
Can anyone tell what is the problem with it? Anyone else have similar problem? I've tried to reformat again with CD but it doesnt even recognize any drive to install on..
Important thing to note is that, in the BIOS screen when i run the HARD DISK TEST, it does recognize it! So i dont understand why it doesn't load the operating system or cant see the hard drive anywhere else!!
What is at fault even? Is the motherboard dead? Althought the bios screen loads fine so does that mean its OK? Is it the hard drive? CHKDSK and the hdd health monitor thing said it was ok right before the crashes..
Please help, I have my first computer science lab in like 2 days with my laptop breaking just a couple days before it with barely any money left to buy a new laptop

"computer always freezes at 56%"
Time to replace your Hard Drive. BACK UP NOW!!!
This will be the 3rd HD in a new HP HDX 18 for me (6 months old).
Open up the HD bay and take a look at the model of the HD.
If it is a SEAGATE MOMENTUS 7200.4 they are known to fail in as little as 1 month from install, and do not last more than 6 months.
Google the brand and you will see that most people are reccomending that you remove the SEAGATE product ASAP (data recovery is next to impossible) and replace it with something else.
I had just finished setting up the PC as I wanted it, OS, programs / Bios, software upgrades, then without warning the 2nd HD went.
I lost EVERYTHING in my C drive, was just preparing to do a full BU and Mirror Image after deleting both from my D and External Drive.
HP is replacing one piece of crap with another, I will be shopping for a different brand for the C drive after the laptop comes back from repair.
There seems to be no end to this BS with SEAGATE drives.
DO A FULL BU NOW!!!
> Was your question answered? Mark it as an Accepted Solution!
> See a great post? Click on the white star and give it a Kudos!

Tutorial: Clone/Installing new hard drive (hdd) & install windows(FAT NTFS)

This is a tutorial for people looking to clone their internal hard drive and install it into their macbook (usually because you've upgraded to a larger hdd). I have also included an installation of windows vis a vis boot camp style. Ive been battling this for the past 3 days, so hopefully this tutorial will answer some questions and save you some time.
1. Firstly get your external drive (clone) ready. Go to applications---->utilities---->disk utility. Click on your external drive and then partition it. I used 2 partitions, one for mac (200 GB) and one for windows (40 GB). For now partition in GUID partition format (found in options). This is important. You can check whether it actually as in GUID at the end of the format when you click on the drive and on the bottom part of the screen it will give you all the drive information. (NOTE: if you have a standard windows installation you can have 1 partition at this stage and then later let boot camp create a partition for you. Boot camp will only format in FAT, so all windows using NTFS are out of luck).
2. if you ve decided to go for 2 partitions, format the windows partition into FAT or NTFS. If you are using windows 7 (which by the way, is a pretty good effort by microsoft and WAS free to download on beta), anyways if your using a windows which requires NTFS obviously format so. WINXP runs just fine on FAT and is probably the easier option. (This is a note for those formatting on NTFS; sometimes OSX with have some error in formatting NTFS at this stage, God knows why, dont download NTFS 3G or Disk Warrior, nothing will fix it. Just leave it for now and when your finished cloning and ready to install windows, use the XP CD to boot from and then you will be presented with the option of formatting in NTFS. I did this then exited before the actual XP install to get my windows 7 in there. (NOTE: you cannot clone windows installations, ntfs partitions, etc)
3. With your external drive ready. Download carbon copy cloner or super duper. I used super duper. So just choose your internal drive and 'backup all files' to your external. This disk will be bootable. It will not be necessary to use a third hdd to restore to. infact i tried both ways of doing it and both worked just as well as each other. No need for a third drive as some have suggested.
4. Once finished, check out the clone. Restart, just when the mac is starting HOLD down the 'option' key....you will be presented with a list of devices to boot from, choose your external (usb or firewire------> note usb only works for INTEL macs, if your not sure if you have an intel mac. In OSX click on the small black apple on the upper left hand corner of the screen and 'about this mac'....it should say whether its intel or not. Also if your pressing option and you get a padlock wanting a password (like i did), but you dont know the password. Dont worry. Get your OSX installation discs, reboot from those (it will do so automatically). Go to Utilities drop down menu and choose reset firmware password. The other 'reset password' resets the password which would come right before entering into OSX at startup.
5. Anyways, assuming your all good booting from your external drive, check out drive, whether everything is where it should be. if it check outs your good to go.
6. Disassemble macbook to install your clone (not that difficult, get a good youtube tutorial for this like http://www.youtube.com/watch?v=MXqJn465lxs and be careful with disengaging your keyboard cable, otherwise its fairly straight forward. I did this about 6 times trying to get everything right and experimenting with installations. So im pretty blase about it
7. Start up your machine hold OPTION at startup, choose your now internal hdd. Your in. (NOTE: if you reset your firmware password the first time, you will have to do this again with your OSX discs)
8. If you have a standard windows installation you can download boot camp assistant or alternatively it will already be in applications---->utilities---> boot camp assistant. Boot camp will create you a partition and then ask you to put in the windows installation disc, is fairly automated.
9. If you decide to do it manually because you have 2 partitions already. Just restart with your windows cd in there and wait for it to boot, if it doesnt, restart, hold option key. Then just go through the usual windows installation, choose the partition with FAT or NTFS.
10. After all this you will have a working copy of OSX and Windows. I use VMWARE to use windows inside OSX, like a virtual drive. VMWARE has a more straight forward installation then Parallels Desktop (which is apparently faster).... but choose whatever works for you. To look at OSX files through Windows install MACDRIVE and you will be able to view and alter all files as you see fit.
Hopefully this tutorial was of some help. I don t generally read any mac forums so i cant really reply to any questions. I just wanted to post my experience so if someone else out there is searching for answers like i was, then these words will be guide and save you time trawling through numberless webpages......Good luck.

I would approach the situation as follows;
install Acronis, if your new HDD is from Seagate or Western Digital I believe you can download this free from their support sites.
create an Acronis Rescue Disc and when it's created uninstall Acronis as you don't need it any more.
attach external HDD and ODD and boot from the Acronis Rescue Disc
create an image of the current main HDD to the external HDD
remove current HDD from your X61 and insert the new HDD in it's place - this is very important.
boot from Acronis Rescue Disc and recover the image you created to it.
Enjoy your new hard drive.
Alternatively, if you can put your original HDD in the external HDD caddy (connectors are the same) or purchase a 2.5" caddy, you could clone after creating the Acronis Rescue Disc, step by step instructions for cloning can be found here.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Msi nf980-g65 Not detecting hard drives

I hope someone can help me while tech support is closed. I'm doing a new build. When I fired it up the MB detects the CdRom but not the Hard Drive. I tried switching the hard drive to an old PC and it detects it fine there.
Thanks!

Thanks Jack, I'm sure you love the noobs...here's the info:
■CPU: AMD Phenom II X4 955 Black Edition Deneb 3.2GHz
■MSI: NF980-G65, MS-7612 v1.0
■Memory: G.SKILL Ripjaws Series 4GB (4 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Model F3-12800CL9D-4GBRL
■Video card: XFX GeForce 9600 GSO 768MB PCIe
■Hard Drive, Western Digital Caviar Green WD10EADS 1TB 32MB Cache SATA 3.0Gb/s 3.5"
■Hauppage 2250 Tuner Card
■Operating system: Will install once hard drive is recognized
■Power Supply Unit: Rocketfish 700W, 30A

Logic Board Does Not Detect Hard Drive???

Problem on startup shows "Folder with (?) Mark on it". Tried to use Disk Utility but it does not detect. Replaced drive and still nothing. Use the drive as external and it boots normal. It looks like it's something else. I have order a new cable connection that goes from the logic board to the hard drive, as it's cheaper to obtain than a logic board, but lets just say that it wasnt that and there is a problem with the logic board, can I buy a "9.5 mm SATA Optical Bay SATA Hard Drive Enclosure" to place the hard drive and boot from it? When I went into Disk Utility it did detected the DVD drive, so I know that portion of the logic board works fine. I don't use or need the DVD drive, and wondering if I can do this, it cost less than buying a logic board.
Please let me know if this is possible, Thanks in advance.

Well logic board seems faulty from the connecting point of the hard drive but not from the optical drive. Optical drive is detected by the Disk Utility, but not the hard drive, and thats why I was thinking of using the optical bay to run the machine.

I used bootcamp assistant to partition my hard drive to install windows. When I got to the part to install windows, I selected the bootcamp partition and then choose format as instructed but it would not continue stating that the partition was in GPT par

Please help!! I partitioned my macbook pro hard drive in bootcamp so that I could install windows. Everything appeared fine until I got to the install part. I selected the BOOTCAMP partition and then selected format as instucted. That was it. The install could not proceed because it says the partion is in the GPT format instead of NTSF. At this point it erased the "BOOTCAMP" name from the partion but the partion still exists.
I tried to reform by going back on the OS side, in disk utitly, erase and format. It will not allow me to select NSTF format.
What do I do to fix this??
Thanks for you comments.
Kristina

In Boot Camp Assistant when you select the format option the Boot Camp partition it automatically formats the Boot Camp partition as NTFS since this is what Windows requires. There is no option to select NTFS or any other format type.

Cannnot use 3TB hard drive to install Windows Server 2008 R2

I am trying to install Windows 2008 R2 on a server with a 3TB HDD, but I can only create a 2TB partition on the hard drive, leaving around 800GB which I cannot even access. I can install Windows on the 2TB partition, but even after installation, I cannot
physically access the remaining 800GB. When I right click on the 800GB unallocated partition in Storage\Disk Manager, I have no options to create a new partition. If I right-click on the existing 2TB partition, I have no option to extend it using the remaining
800GB.
Motherboard details:
Asus Veriton S460
Product Name: EG31M
System BIOS: R01-C2
BIOS Release Date: 11/27/08
Can I do anything to use the remaining 800GB?
Thanks.

Link
Known Issues/Limitations
Because the transition to a single-disk capacity of greater than 2 TB has occurred fairly recently, Microsoft has investigated how
Windows supports these large disks. The results reveal several issues that apply to all versions of Windows earlier than and including Windows 7 with Service Pack 1 and Windows Server 2008 R2 with Service Pack 1.
To this point, the following incorrect behavior is known to occur when Windows handles single-disk storage capacity of greater than 2 TB:
The numeric capacity beyond 2 TB overflows. This results in the system being able to address only the capacity beyond 2 TB. For example, on a 3 TB disk, the available capacity may be only 1 TB.
The numeric capacity beyond 2 TB is truncated. This results in no more than 2 TB of addressable space. For example, on a 3 TB disk, the available capacity may be only 2 TB.
The storage device is not detected correctly. In this case, it is not displayed in either the Device Manager or Disk Management windows.
Many storage controller manufacturers offer updated drivers that provide support for storage capacities of more than 2 TB. Contact your
storage controller manufacturer or OEM to determine what downloadable support is available for single-disk capacities that are greater than 2 TB.

PowerEdge R720 - Could not detect Hard Drive

I have 2 Servers PowerEdge R720, and I am trying to install windows server 2008.
I used the windows drivers, and when i got hard dive screen i did not it
please i need help

Abu-saeed,
It sounds like the issue may be that the raid driver isn't being loaded. How are you trying to load the OS, by booting to the 2008 media?
Depending on the controller you will have different driver files. If you have the H310, H710, or H710p then this is the driver you will need - http://www.dell.com/support/drivers/us/en/19/DriverDetails/Product/poweredge-r720?driverId=M20VR&osCode=WS8R2&fileId=3160710291&languageCode=en&categoryId=SF
If you are trying to load the OS through the F10 Lifecycle Controller, then this is the file you will need - http://www.dell.com/support/drivers/us/en/19/DriverDetails/Product/poweredge-r720?driverId=FF29M&osCode=WS8R2&fileId=3325054588&languageCode=EN&categoryId=DD
Let me know if this helps.

Unknown Hard Error when installing Windows XP?

Ok first off I tried installing Windows Vista Home Premium on my new 24in iMac and after installation had problems installing drivers. Found out it was because I had a 64 bit version of Vista and the iMacs dont support that. Then I got a copy of XP Home Service Pack 3 from a friend to try. Im not sure if it is 32 or 64 bit but I was going to try it anyways. Its starts to extract the files and get ready for the install but not long after it does that it gives me an unknown error and the blue screen of death.
"STOP: c0000221 Unknown Hard Error
\SystemRoot\System32\ntdll.dll"
Does anyone know what this means? I would really like to get one of them installed. I dont care which one...if anyone knows how I can put a 64bit version of Vista on my iMac that would probably be best since it installed fine and just messed up when installing the drivers. Otherwise can anyone tell me what to do about this unknown error? Or do I need to search around for yet another operating system cd?
Any help will be greatly appreciated.

Hi KadeP,
there is indeed not a solution for that CD-problem, since you are getting it when installing from the CD not after the installation, when there is a problem with that specific file on your harddisk.
So, apart from the checking of the CD for physical problems (dirt, dust, scratches) the only other solution would be the use of another CD and maybe doing a full disc-copy of that CD onto a CD-R or CD-RW and hoping the best.
As for the Vista procedures the hatter described, all these has to be done before even installing Vista and also on a Windows PC.
The outcome of that would be a modified Vista Installation DVD, which seems to be installing even on iMacs not really supported.
Since I don't have Vista I never tried it myself, though.
But the hatter is 'our local Vista/Windows 7 genius'
As for the 'old XP CD' you found:
such behaviour/error is usually a sign that the XP CD is not at Service Pack level 2 (SP2) which is a must for XP CDs.
However, you can use these instructions http://www.winsupersite.com/showcase/windowsxpsp2slipstream.asp to 'slipstream' yourself a XP SP2 installation CD.
But again, you have to do it on a running Windows PC.
Regards
Stefan

Time machine not detecting external drive after installing OS X Server

Hi,
Recently I installed OS X Server to set up a vpn but while I have been setting it up I have noticed other Mac's with in the network can not back up anymore the the external hard drive that they used to.
I have made sure that the external drive is on shared folders etc. and the other Mac's can detect the hard drive if I use connect to server to connect to my Mac Mini that the hard drive is attached to.
I have tried to connect it to the Airport we have here but it wont come up on any computers under the Airports name, we are using its hard drive at the moment to back everything up to but we need to back up to the external hard drive ASAP.
The hard drive in question is a SmartStor DS4600 6TB using USB 3 to connect to the Mac Mini and all the Mac's are running Mavericks.
This needs to be resolved ASAP so any help would be greatly apreciated.
Thanks,
Bruce

I *think* with OS X Server to use an attached external drive as a TM backup, it has to be setup this way. You're right, a shared folder is setup under a Backups folder. However, each Mac on the LAN will create its back up in the Backups/Shared and those back ups will be visible if they ever need to restore.
I don't understand why you need to have the back ups created at the root of the volume. And I don't know if or how this can be done using OS X Server. I have always used the TM Backup service and have not tried to share an externally attached drive to be used as a back up. You may be able to do this by going into the File Sharing service and define your back up drive there. You'll have to give read/write permissions to each user just like you would do for any other shared folder.

Will not detect hard drive

I am trying to help out a friend who bought an Ultra2 board (no raid) on my suggestion...it will not see the hard drive. I have tried 3 different hard drives and different cables. This is the second board he has ordered with the same problem and he has also replaced the RAM.
HELP!!

As you said "When entering the BIOS the screen goes blank for at least 30 seconds before the BIOS is displayed", can you check what is shown in the D-Bracket? Btw, did you enable/disable the RAID?
Please check the jumper on the WD hdd. Set it to Cable Select and try again with the mobo on all IDE channels, including the RAID IDE too. If BIOS can't detect it, maybe RAID will. You may also try with jumper at MASTER and SLAVE. Also, just try with this single HDD without any CDROM or CDRW attached. There must be something you can set/configure to get it work if the HDD is not faulty.
If the HDD work standalone in the IDE Channel, then add in the CDROM and CDRW one by one. If problem reappear, then the most suspect is the power supply unit. If from everything you have tried and the HDD can't work, oh well.....

K8N Neo4 Platinum not detecting hard drive

Hi,
what may cause a K8N Neo4 Platinum to not detect an IDE hard drive? no matter what i try the mobo never sees the hard drive.

welcome to the forum
1) What Hard drive - size & make
2) How connected - By itself as Master or slave.
3) What other ide devices.
it's a lot easier when u post some specs & we can quit the guessing games.

Can I use an external hard drive to install Windows 7 on a macbook

Hi!
I currently have a 13" retina macbook pro and want to install windows 7 home premium to use on bootcamp. The problem is that my computer does not have a disk drive. So can I use a desktop to put in the windows disk and download it to an external HDD, then install it on my macbook with the external HDD? Or do I have to use a USB. Also, does anyone know of a place I can just download Windows 7 Home premium 64bit?
Thanks

Hi! If your macbook doesn't have a cd drive you need to have Windows 7 but an ISO image, you can't just copy the contents of the copy into a USB and expect it to work. There are many tutorials on internet on how to obtain an ISO image from an installation disc, for example: http://pcsupport.about.com/od/software-tools/a/create-iso-image-file.htm As for "just download Windows 7" (i suppose you mean free download) this is not the right place to ask, believe me. Try searching Windows 7 ISO on google, but be careful with what you download and form where, also you are going to download the Windows drivers from the Bootcamp program, try reading this manual to give yourself a better idea: http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf

Lost Disc recovery after hard drive crashed installed windows 8.1 no drivers

Hard drive crashed and replaced hard drive with ssd, lost all recovery discs then updated to windows 8.1 now i dont have any drivers like finger print scanner and cd discs will not load. It is a hp pavilion dv6-3079tx
Need Help
Thanks,
Leady05

Hi @Leady05 ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv6-3079tx Entertainment Notebook PC needing drivers and software.
Here is a link to the HP Support Assistant. Just download and run the application and it will help with the software and drivers on your system that are needed.
Hp SimplePass Identity Protection Software here. If you needed to download. You can download any of the Multi Media software here. Cyberlink products are all there.
Hope this helps you.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

MC371 not detect hard drive when install Windows 7

Similar Messages

Maybe you are looking for