MC40 mvt types considered

Hi all,
This is my first thread and I would like no know if anyone can tell me which mvt types those the MC40 transaction considers?
Thanks in advance
Oliver F

Oliver,
To my knowledge it considers all Issue movement types(Inclusive of Stock transfer for plants) like,
201,221,231,241,251,261,281,291,301,303,309,351,641,643,645,647,672,674,676,
678.
Hope this helps...Reward your points,
Regards,
Prasobh

Similar Messages

  • OMJJ - Account grouping - Add mvt type indicator L

    Hi
    Pertinent to;  The account grouping in movement type for 101.
    For the STO I have enabled the Goods Recipet using MIGO and mvt type is 101. But the Reference document would be Outbound delivery instead the STO purchase order.
    Now the issue is after GR the Stock account is not debited as the movement type is not configured for Outbound delivery based GR.  How do i add the movement type indicator "L"  Goods movement for delivery note in OMJJ-Account grouping ?
    Currently only for F & B not for L.
    Thanks in advance
    Regards
    RG

    Hi,
    The Process flow is Stock Transport Order --> Outbound Delivery --> Goods Receipt
    So Outbound Delivery has a link with Stock Transport Order i.e. Receipt Indicator "B" so during GR against OBD it will consider B, no need of maintaining L and also it is not possible.

  • Good receipt mvt types

    Hi,
    Good receipt mvt types 101,102,105,106,122,123,161 which affect stock level.
    561 and 562 also considered as GR. we want to report actual GR to store.need to list affected mvt types. Please advise.
    Please let me know if any other GR mvt types used in the SAP. Thanks.
    Thanks
    Udaya

    Hi
    501, 503, 505 - GR without reference to PO
    511 GR with free of charge
    Thanks/Karthik

  • Excise Posting in Mvt Type Sample Withdrawl

    Hi
    1) client is manufacturing goods in batches.
    2) They keep sample for testing from each batch, Since it is finish goods and consider as exciseable material.
    3) Every sample are posted through Mvt Type 333 to Consumption account.
    3) Actual requiremnt is create new Mvt Type for the Sample withdrawl, For which two accounting posting done in the system.
    One for the material and
    second for the Excisable document.
    I have copied Mvt Type 333 and created new Mvt Type 733.
    At where i can do customizing for the Excise posting.
    Please help
    Thanks

    Hi,
    As I believe youu2019re mentioned about finished goods and 1st decide, when excise going to be applicable:
    Once finished goods manufactured in the factory
    OR
    Once finished goods goes out from factory premises.
    If excise applicable for  finished goods when goes out from factory premises, then no need to worry ,just after production you can take sampling where you will have two accounting enter which reduces from inventory stock of  finished goods  by debiting G/L account of sampling.
    If excise applicable for finished goods when just finished manufacturing in the factory, then you need to find how to do it , which & when register (RG1) to update with which movement type and then think about sampling.
    But if for sampling excises need to be updated, then movement type must be added to update excises.
    NOTE:
    Movement types specified relating to goods receipts involve excise invoices & which excises register need to be updated in the following path
    SPRO ---> Logistics general -> tax on Goods Movements-> India -> Business Transactions-> Specify Which Movement Types Involve Excise Invoices
    Regards,
    Biju K

  • Report for Mvt Type 103 & 105

    Dear Gurus,
    Is there any report which will show the corresponding material document of 105 MVT/ 104 MVT type  for 103 MVT type Material document
    Regards,
    Rajesh

    Hi,
    What you have to do is:
    Enter Tcode MB51...Enter Mvt type 103  and in to enter 105..
    Now clcik on F8 Button...It will display you the result as per what you have expected..
    Cheers!!
    Utsav

  • Mvt type 103 and 105

    Dear all,
    I am doing GRN through 103 mvt type of 100 Qty. But at the time of 105 Mvt type qty found 90 that means 10 Qty still pending in block stock. How to process with 10 Qty in block stock which is due to vendor mistake. Please suggest exact procedure and accounting effect on the same.
    Regards
    Atul

    While posting the document against the movement type 103, no FI documents get generated becasue there is no valuation for the materials at the blocked storage Location. The FI document is generated with the movement type 101 and 105.
    In this case, you can cancel the material document number created by the movement type 103 by 104. Then again you will have to do the GRN in 103. The quantities in the material document number created by 103 movement type can't be modified.
    Secondly, if you have the final GRN against the 103 document, then you will have to return the stock by movement type 122.
    Still any queries, revert back.

  • Report to check the stock transfer through 303 mvt type

    Hi,
    I understand that the stock transfer can be done through two ways
    1. Using 351 against UB PO and go MIGO using 101 --> Can be checked in the report MB5T, for stock in transit
    2. Using 303 and 305 mvt type --> the stock lies in Stock trans(Plant)
    When we do 303 mvt type, is there any standard report to check the stock in stock trans (Plant) ? Please let us know.

    hello
    for this you can use MB51 only. same report you can give the movement types as 313 & 315.
    Laxman

  • Auomatic TO creation and confirmation from PCN with 321 MVT type

    Dear Friends,
    I am facing following WM issue, Kindly go through it and reply me with your valuable solution.
    In my plant QM is active, so while receiving goods against any Purchase Order (MVT TYPE 101), all my stock goes to quality. After UD check, 99% material move to unrestrictd stock (321 mvt.type) and 1% used for quality (331 mvt. type).
    For an example if I have received 1000 kg material (which initially goes to quality), after UD 995 kg material come to unrestricted stock and 5 kg used for quality check.
    In my existing system for material document with mvt. type 321, one PCN is generated in the background, and using LT05 we make TO from PCN and confirm it.
    But is it posible to create the TO and confirm from the PCN (Mvt. 321) in the backgroung itself, i mean to say that while my QM user is doing UD, material document with mvt 321, one PCN and TO will be generated and TO will be confirmd in the background itself.
    I don't want to use LT05  separetely to make TO from PCN.
    Please reply me soon.

    You need to make the config settings here in ur system.
    SPRO > Logistics execution >  WM > Interfaces > Inventory Management > Activate Automatic TO Creation
    Assign the relevent setting to movement types...
    Hope thsi helps
    Thanks & regards
    AHP

  • Automatic TO Creation and Confirm for the 321 Mvt type

    Hello Experts,
    Like to know the customisation invovlved for automatic TO creation and confirmation for the 321 movement type in which QM is activated.
    I have already activated in OMKZ as below
    1.Automatic TO for 321 mvt ytpe
    2.TO item to be confirmed immediately
    3.Propose confirmation
    Table T333 -AUTTA
              T333-SQUIT &
              T333-VQUIT is activated.
    Please let me know any other settings to be performed
    Regards
    Krishna

    Hello Experts,
    I am trying to create the Automatic TO and TO confirmation for the mvt type 321.
    I made the below settings
    I have activated in OMKZ as below
    1.Automatic TO for 321 mvt ytpe   -"A"
    2.TO item to be confirmed immediately  - tick mark
    3.Propose confirmation   - tick mark
    Table T333 -AUTTA
    T333-SQUIT &
    T333-VQUIT is activated.
    I have activated in OMKX as below
    Table T321-TBFKZ Immediate TO Creation with "A"
    T321-TAFKZ TR creation with "X"
    After doing the settings i am not able to see the Posting change number in the Material document created for the mvt type 321.
    Please let me know how to create the Posting chnage notice for the material document and how to convert the Posting change notice to automatic TO and confirmation.
    Thanks & Regards
    Krishna
    Edited by: Hariharan krishna on May 25, 2011 8:01 AM

  • Error while doing GR for mvt type: 501

    Hai
    Whenever i do a G.R with out P.O (mvt type 501) i encounter the following error
    "field selection for mvmt type 501 / acct 895000 differs for vendor goods movement (014)"
    How to fix this?
    Thanks

    Hi,
    Check the G/L account 895000 in t-code FS00, whether the G/L account's Field status group seems t0 be inconsistency in it.
    Goto FS00, put your G/L & company code, goto tab Credit/Bank/Interest- DOuble click on filed ststus group.
    Check filed selection there.
    Make it mandatory /suppress/optional for both as per the requriment..

  • Automatioc TO creation with mvt type 331(WM)

    Dear Friends,
    I am facing following WM issue, Kindly go through it and reply me with your valuable solution.
    In my plant QM is active, so while receiving goods against any Purchase Order (MVT TYPE 101), all my stock goes to quality. After UD check, 99% material move to unrestrictd stock (321 mvt.type) and 1% used for quality (331 mvt. type).
    For an example if I have received 1000 kg material (which initially goes to quality), after UD 995 kg material come to unrestricted stock and 5 kg used for quality check.
    In my existing system for material document with mvt. type 321, one PCN is generated in the background, and using LT05 we make TO from PCN and confirm it.
    But is it posible to create the TO and confirm from the PCN (Mvt. 321) in the backgroung itself, i mean to say that while my QM user is doing UD, material document with mvt 321, one PCN and TO will be generated and TO will be confirmd in the background itself.
    I don't want to use LT05  separetely to make TO from PCN.
    Please reply me soon.

    Use RLAUTA11 SAP Report - Create transfer orders for posting change notices automatically.
    Thanks & Regards,
    Sudhakar

  • IR of WITHOUT PO (WITH MVT TYPE 501)

    HELLO EXPERTS,
    when I go for GR without PO with movement type 501, i dint find any delivery note field in MIGO SCREEN.
    so can anybody help me how to get it.
    If it is not possible than how to do MIRO (invoice verification), with any reference document, like delivery note,vendor or something else.
    because my project is in GO-LIVE phase, there is some GR WITHOUT PO.
    so if I don't have any reference document, my data entry will get doubled (GR,than IR)
    SO can anybody suggest me , if there is some other way..so that while i m going for IR data is not required,i e. there is some reference document from which I can copy my data.( like PO BASED IR )
    kindly help me out.
    regards..
    Raghu

    Hi
    You can upload the initial balance of inventory (GRed but not Invoiced) in MM and let FI upload initial vendor balances (to be paid to vendors - open invoices). There after FI can match these two  (intial upload accounts). Or else do GR with mvt type 501 and then post FI invoice - debiting consumption account and crediting vendor account. But result is same as explained above.
    Thanks

  • Automatic creation of Purchase order not possible for 103 mvt type

    Hi,
    If i could configure "create p.o automatically", while doing G.R for mvt type 101,
    why cannot i do the same with 103 mvt type.
    I checked the checkbox "create p.o automatically" for movement type 103 and tried to do G.R for others using Mvt type 103.
    It is throwing error as "Update control of movement type is incorrect (entry 103 x x).
    Which entry controls the above my requirement?
    Please advise .
    Thank you.

    Hi,
    These are std which is provided my SAP, you can configure for automatic PO creation for 101 movt type only..........

  • Automatic creation of Batch using mvt type 311

    when i am trying to transfer material from one storage location to another using mvt type 311. the system is not creating the batch automaticcally.
    I have already maintained allthe basic configuration required for this.even in IMg ->logistic general->batch management---->creation of new batch in this path also for mvt type 311 i mainatined (automatical/manual without check)batch creation.but still the system is not generating the new batch.
    Can anybody help in this issue.
    Thanks in advance

    Hi,
    When you do transfer postings, SAP will set the batch number same as the one from which you are issuing the stock. To avoid this you can set the creation of batch to B (Automatic/ Manual with check in user exit)
    You need to use following user exit at batch creation
    EXIT_SAPLV01Z_001
    EXIT_SAPLV01Z_002
    Hope this helps, reward if useful,
    Best Regards VS

  • Error while doing GI to cost center (201 Mvt type)

    Hi,
    While I tried to do Goods Issue to Cost center through mvt type 201. I get the following error.
    "Account type K is not defined for document type WA"
    Kindly help reg it.
    Regards,
    Vimal

    Hi,
    Go to OMB6 and maintain the Entry in this field is optional.
    Thanks & Regards,
    Kiran

Maybe you are looking for