MC40: Some materials don't have ABC Indicator

Hi Experts,
I run MC40 in background with 13000+ materials using usage value in % strategy, most of it has its ABC indicator updated while some are still blank. Are there any indications (in Material Master or anywhere) that those materials with "blank" ABC indicator are excluded in MC40 run?
Points will be awarded.
Regards,
LM

Hi
MC40 takes all the materials for Analysis, not only the materials whcih have ABC indicator.
you select this checkbox, the ABC indicator calculated in the document evaluation will be changed in the material master. You can only use this option, however, when the evaluation runs in the background.
If you want to update the Materials ABC indicator you can slect the Check box
Update ABC Ind in Background Processing mode.

Similar Messages

Cisco Security Manager some firewalls don't have global policies assigned for the base definitions

Hello Experts,
In CSM 4.6 I noticed, some firewalls don't have global policies assigned for the base definitions like (SSH/SNMP/syslog/AAA,etc).
Unfortunately in Cisco CSM each policy has to be applied individually, it's easy to miss one policy or another. Is there any better way to verify and get the list of devices, which does not have SSH/SNMP/syslog/AAA
Thanks,

Sorry if this comes to late, I just now came across this thread. I have rtorrent and rutorrent sunning successfully on my x64 Arch Linux install.
Try putting the "SCGIMount /RPC2 127.0.0.1:5000" line in your httpd.conf file right after the LoadModule lines (it's line 124 for me).
I seem to recall it not working when I put it at the end of the file.
Best of Luck!
Martian

My iTunes Library is giving me duplicate songs. One has an exclamation point in the cloud and the other has the arrow in the cloud for download. Some songs don't have anything which means they play fine. It's burned CD's and purchases from Itunes.

All CD's that I burned for my library have an iCloud icon with an explanation point next to the song. If I right click it prompts me that 'This Item was not added to the iCloud because an error occurred. Some of my purchases have no cloud icon next to them at all and they play fine. Numerous purchases have 2 of the same songs listed..one has the cloud with the explanation point and the other has the cloud with a down arrow for downloading from the cloud. What I am having to do is delete the ones with the explanation point and then download the one with the arrow. It's taking forever. Then I still have to go back and re-burn my CD's and then back them up in iTunes Match. Any ideas of what's going on? and how to get this all done faster? Getting really frustrated!
Thanks
ringerman50

i noticed this as a bug in iTunes. make sure the correct file is selected in the preferences menus. It does not have to be the default location directiory as Vazandrew stated. your iTunes music library can be anywhere you want it. i have mine on an external cuz i'm a dj and have over 80,000 songs.
once you select/verify the location of your music library, simply drag the folder into the left panel in iTunes from a finder window. iTunes does not automatically add the items like it use to for some reason.

Installed mavericks server and now some users don't have access to folders!? Why and how do I fix it???

I have just upgraded the server and os to mavericks and now users that used to be able to open and save or even log in are now locked out with the server saying wrong password. I reset their password and still nothing. I created a new user and they can't even log in? Why now? And how do I fix this. It seems that some users and groups now don't have access and all that was done was to let the group open a shared folder that they have access before. I reset everything and am now very frustrated!!!

Hi
Seem to be an issue with Maverick
After trying to solve the issue with all tips i found here and on the net
I decided to go back to Mountain Lion for my server using TimeMachine backup, and stay with Maverick for my imacs
Work well again
Until Apple will communicate on it or deliver a patch, i would suggest to do the same

Some sites don't have symbols unless "allow pages to choose their own fonts" is checked

With option "allow pages to choose their own fonts..." deselected, some symbols are improperly displayed.
I think I know what's happening. With the option selected, FF displays some symbol characters with the wrong font.
But, this doesn't make sense, since these symbols are not in any language font. None of them will produce the correct symbols if selected as the personal preferred font. So, it's incorrect to render these symbols in any of the fonts selected as my personal preference, regardless of status of this option.
So, FF should use the a symbol font for these symbols regardless of this preference setting.

You can accomplish what you want with a user style. Here are step-by-step directions. If you need any more help, just ask.
# Leave "Allow pages to choose their own fonts" enabled.
# Install Stylish.
#* https://addons.mozilla.org/firefox/addon/stylish/
# After Stylish is installed, open the Add-ons Manager, User Styles category.
# Click the Write New Style button at the top.
# In the style editor window, paste either of the following. Give the style a name and then click the Save button.
'''Variant #1''' 
This is the easiest and safest thing to do. It applies your default sans-serif font to all sites, except those you specify. To specify exceptions, replace the placeholders with actual domain names. To add new exceptions, add another '''|''' symbol followed by the domain name.
<pre><nowiki>@-moz-document regexp("https?://(?!(example-of-an-exception.com|www.placeholder.site-exception.net)).*") {
* { font-family: sans-serif !important; }
}</nowiki></pre>
'''Variant #2''' 
This requires a bit of work on your part. You must know the font that's being used to display the symbols in question. Right-click a symbol and choose Inspect Element. In the Inspector pane, click the Fonts tab. You should see the font family names listed there, labeled with "remote". The actual font family name is below, under "Used as:". 
You're going to want to specify your ideal font first, then the site's fonts after that. If certain characters can't be rendered with the font you want, then Firefox should fall back to the second font in the list, or the third, and so on. If none of the specified fonts contain the required characters, then Firefox will display the Unicode codepoints (rectangles with numbers in them).
<pre><nowiki>@-moz-document url-prefix("http://"), url-prefix("https://") {
* { font-family: Arial, "Segoe UI Symbol", FontAwesome, PlaceholderFontOne, "Placeholder Font Two", sans-serif !important; }
}</nowiki></pre>
----

TS1389 Need to know what 5 computers have my authorization. May ned to deauthorize some but don't know which nes!!!

Need to kniow which 5 computers are authorized. I may need to deauthorize some but don't have the answer. Trying to play some songs I purchased but am not allowed. Get the 5 computer authorization message! I know I have Itunes at work and on two Ipods and my home computer
Thanks

There isn't currently a way to see a list of which computers are authorised for your account (iPods, iPads and iPhones don't count in the 5 limit). Have you had other computers in the past which you haven't deathorised and/or updated or reinstalled the OS on the computers that you currently have without first deauthorising them ?
Individual computers can only be deauthorised directly on them, but as you have more than 1 computer authorised then you can log into your account on your computer's iTunes (Store > View My Account, Store > View My Apple ID on iTunes 11) and 'deauthorise all' (which you can do once every 12 months) and you can then authorise/reauthorise the computers that you still have and need : authorising and deauthorising.
Deauthorising a computer doesn't remove any content from it, it just means that you won't be able touse any iTunes downloads on it until you reauthorise it.

Problem with updating ABC indicator for Material

Hi All,
My client wants to run cycle count for one warehouse.Since the material master does not have ABC indicator in Storage view, Iam using MIBC for updating the Material Master. But after executing MIBC also ABC indicator is not getting updated in the Material master. Please help.
Rgds
Srinivas

Hi, You need to have an history of at least several months of movements in order to do this analysis. You need also to flag "all articles held in stock" in order to select articles without ABC indicator. Rgds, Philippe

How do i scan a document from the printer to send in an email to some one else i have a HP-B209

how do i scan a document from the printer to send in an email to someone else

Hi!
To scan:
You may press the start scan button on the printers control panel or use the HP solution center that must be installed in your computer to scan a document or photo.
Scan to email:
Some printers don't have the option in the control panel for scan to email. Mostly it is with the HP solution center software that should be installed in your printer.
Note:
For Windows the software is called HP solution center
For Mac it is called HP utility
*I am part of the HP family but I do have my own stand
*Clicking the Kudos at the left is highly appreciated
*Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.
*Have a HP "Happy Printing" day! =)

I don't have IMAQ vision, where can I get some super basic easy VI's for IMAQ?

Hello,
I don't have IMAQ vision, where can I get some super basic easy VI's to get images from my IMAQ PCI-1424 board, without Vision?? is there some kind of tutorial that will help me get started from the ground up in designing VI's? Also I am trying to run the HL Snap in picture control.vi and I keep getting an error that says:
-1074397150 occured at IMAQ snap.vi
Possible reasons,
NI-IMAQ (Hex 0xBFF6022) wait timed out; aquisition not complete.
Why am I getting this??? it is driving me nuts, I don't know how to get a image on my computer from the IMAQ board. I can get one in MAX. Also in MAX I try to change the camera driver to Kodak because that is the boar
d that I have KLI-2113, but when I try to change anything under properties like the window size and then apply it, it says error removing old camera. why does that do that? Some of the other drivers sort of work and let me change the settings. I don't know if they work right though. I can get atleast some response to light from the CCD chip.
Anyways, thanks,
Brian

Brian;
There is an example on how to display images in LabVIEW without having the full IMAQ application.
You can always convert the images to bitmaps (flattening) and display them in a picture indicator. If you are going to do some image processing within LabVIEW, this may be the way to go.
About the error you are getting, hopefully the above example will help you in resolving the issue. If the problem persist, it will be more beneficial if you can post the code. Also, you may get better answers if you post your question in the Vision forum.
Regards;
Enrique
www.vartortech.com

TS3274 Don't have any sound on some of my games

I use to have sound on all of my games and today I went to play them and there is no sound at all. There are some of my games I still have sound thou. My smurffs, where's my water and some of my other games I first got don't have sound but my bingo , music pratice ones have sound. What is the problem am I going to have to uninstall them and reinstall them?

This usually would mean that you have system sounds muted if none of your games have sound.
Do these apps that don't have sound have their own volume controls? Most games do have it in the settings as an option.
Just in case .....
If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

I am unable to download ios7. It says that I don't have enough storage available. On my phone it says that I have 6.2 GB used and 151 MGB available. Isn't the phone supposed to have 16 GB? I already deleted aps and some photos.

I am unable to upgrade to ios 7. It is telling me that I don't have enough storage to upgrade. I checked my usage and it says that have used 6.2 GB and that I have 151MB available. I thought that the phone is supposed to have 16GB? I have already deletes some pictures videos and apps... not much has changed. What should I do??
Also, I just got photostream and when I went to look throught the pictures on photostream, some have started distorting. The images seem to be zoomed in so much and I can't unzoom them. I worried that it will start ruining the photos on my laptop.

As Carolyn said, you'll need to have space on your device. If you want to see how space is being used up by what applications you can follow Carolyn's advice: Tap Settings > General > About
One option is to delete some old applications.
Another options is to temporarily remove your music.
Another option is to transfer some photos to your computer to make space. To do this, open iPhoto and click "import photos. Just be sure to check the option "Delete items from camera after downloading" or you won't actually delete anything and won't make any space!
Here's more details:
http://support.apple.com/kb/HT4083

Trying to reload firefox and getting this message, when moving to the applications folder: "The operation can't be completed because you don't have permission to access some of the items."

Been having problems with Firefox/internet for several days, and all my updates seemed current. I decided to try to reload and have removed the other icons/download attempts from the app file. When I try to drag the icon into apps, I now get this message:
The operation can’t be completed because you don’t have permission to access some of the items.

* Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
* Trash the current Firefox application to do a clean (re)install.
* Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

Can't move any files... "The operation can't be completed because you don't have permission to access some of the items."

This is a strange one... I just recently did a complete format/reinstall of Lion because of very poor performance after upgrading.
So I'm on a totally fresh system, no TimeMachine restore or anything. I've installed all my apps from scratch - no prefrence file backups or anything. Everything is fresh.
Yesterday I tried to copy a file from one folder to another and I got the error "The operation can’t be completed because you don’t have permission to access some of the items". Checked file permissions... repaired disk permissions... made sure I was logged in as admin (I only have one account)... everything looks good.
This is now happening when trying to copy any files anywhere on my machine... Very frustrating.
There's a couple strange side-effects I've noticed:
- I can move & copy files just fine in terminal... without sudo...
- The little lock icon in the bottom right of the Get Info window doesn't do anything - I can't unlock it. I can still edit the permissions for the file/folder but I can't select the "apply to enclosed items..." option.
Does anybody know what the heck is going on?

jsd2 wrote:
Try creating a new admin user account, logging into it, and then creating some new items on the Desktop and elsewhere. Does the same thing happen there?
Ok the strangeness continues!
I created a new "TestAdmin" account, but it doesn't show up in the Users & Groups prefrences sidebar... The /Users/testadmin folder was created, but the account doesn't show up in the prefrences or login window...
I tried a reboot to see if the account would show up and it still doesnt.... However after the reboot I am now able to copy files again!
I'm paranoid that the problem will show up again since I have no idea what fixed it. I tried rebooting previously after repairing permissions which didn't solve the issue so it's not like I haven't rebooted since it started.
And now I have the issue of not being able to create user accounts.
A little dissapointed with Lion to be honest... the new features are cool but there are so many little bugs it really feels half-baked.

Can't save multiple folders to external drive. Get: "The operation can't be completed because you don't have permission to access some of the items." when dragging large folders to mac os extended journalled external drive from OS 10.6.8

Hi
I am feeling VERY desperate!
After losing an external drive [dont ask....] -   I got another one : 2TB WD formatted properly [ OS extended journalled for mac ] ready for action to move my thousands of files and images and ppts in hundreds of folders across from the laptop to this drive because I travel a bit with the laptop and this is too risky not to back up at home.
But this message came up after starting on moving folders across [** and not straight away, sometimes after moving a folder when 4 of 6 gb of files across then the message comes up = very frustrating]:
"The operation can’t be completed because you don't have permission to access some of the items."
I am dragging mixed sometimes large complex folders to this os extended journalled external drive from my mac book pro OS 10.6.8 - it would take decades to move items one by one or even folder by folder and really confusing.
I have dragged-copied various small folders and files across successfully, but it is only working 50:50 and I can't leave machine with the idea of things copying eg: overnight - it just won't work....
I have been browsing google and find some people describing in CODE how they overcome this 'message'   .... but I [and I guess some other viewers of this in future & also in desperation] would need instructions for beginners.... to try this type of thing. I don't know any code.
How can this be happening - I feel ANGRY at APPLE !!!! for not posting easy fix instructions yet re; this, or better still updating software so it doesn't happen [ that I can find at least !!! ] .   There seem to be hundreds of people stuck with this stupid message and inability to back up their projects etc.
Can anyone help ?
Many thanks
Julie
15 August 2011

hi Samberl
thanks a lot for the fast reply.
I was dragging folders from main folders on the laptop-desktop onto the external drive icon - to copy them across....
Your suggestion sounds very promising - I didn't know about 'cloning'.
Yes the idea is to backup the laptop -    I thought I would just move it all now, new - and then keep saving/dragging physically   across to the new drive myself each day or two...
Would this be the sizeof the internal hard drive = c.500 gb ?   =   under the HD icon on desktop is written :
" 499.76gb , 311.5 gb free "
I can erase and start agin on the new external drive - so this plan is to make two partititions, rather than the one at present, and make one of them 500 gb ?
I have found CCC [carbon copy cloner] googling - looks good.
When CCC site says it backs up the hard drive - would this mean all my files [over 100 gb] that are mostly in folders on the desktop, plus the others in itunes, iphotos etc found in the HD icon, would all copy across successfully [wherever they are in the computer ] ?
thanks again, hope you can clarify these things and then I will go for it.
It would be great and amazing if this 'lack of permission' message doesn't show up in the process of doing this ccc transfer - hopeful!
Julie

I am trying to restore an older iPod Touch, but do not have the passcode. I am getting an error message saying that I need to free up some space, but I cannot because I don't have the passcode and have never synced this device to my account. Help..

I am trying to restore an older iPod Touch, but do not have the passcode. I am getting an error message saying that I need to free up some space, but I cannot because I don't have the passcode and have never synced this device to my account. Help..

If it is asking for the screen-lock passcode then:
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
Otherwise follow varjak paw recommendation

MC40: Some materials don't have ABC Indicator

Similar Messages

Maybe you are looking for