MC46 not getting accurate information

Dear All,
My client needs to view when was the last consumption.
However MC46 is not giving me accurate information. It shows (no consumption)
Maybe it is because some movement types are not catered by the report.
Is it possible?
I have new customized movement types 961/963/965/967
May i also know what movement types are catered by the report and if i can actually configure it to include additional movement types.

You can check the Last material Doc posted for the Movement type & material combination in MB51 trxn code..
then the date of the Last material Doc posted is the last consumption for that material..

Similar Messages

Google cloud print for officejet pro 8600 - could not get printer information from hp.

I just purchased a new OfficeJet Pro 8600 today. Everything seems to work great except for the connector to Google Cloud Print. I can print from AirPrint, as well as emails to the hpeprint.com address, but when I try to register via the google site, I receive the "could not get printer information from HP" error message.
The printer is connected via wireless ethernet, and seems to work find otherwise. I have no restrictions on who can send print jobs, and I have changed the email address for hpeprint.com a few times, as suggested in other forum threads, but it can never connect to the the Cloud Print service. I am at the latest firmware level listed on the HP website. I have tried to initiate the connection from multiple PC's as well as multiple web browsers.
This was a big factor in purchasing this printer. Help anyone?
This question was solved.
View Solution.

Hey rch33k, I am sorry for the ongoing issue that you are having accessing Google Cloud Print. This is being looked into as this is not a singular issue and is affecting other customers as well. Engineers are currently investing this problem to try and provide a solution to it. I want to again apologize and thank you all for your patience in this matter. They only other thing to attempt at this time is to contact Google for further assistance to see if anything can be done on their end. Hopefully this will be fixed quickly
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

Google cloud print "could not get printer information from hp"

As of today google cloud print has stopped working with my laser jet pro. I started getting an error message that "hp eprint is unavailable at this time". I decided to remove my hp printer from google cloud print. I haven't been able to add it back in since. Every time I try to verify the printer with google cloud print I get the error message "could not get printer information from hp". Everything seems to be configured properly as far as I can tell. I even removed the printer from hp connected and readded the printer and have changed my printers email address. Help please! I am on Chrome OS and this is the only option I have to print.

The issue just kind of resolved itself today and I was able to add the printer. I'm assuming it was some kind of server issue on hp's end because I haven't changed anything since yesterday.

I have a Macbook, an iPad 2, and an iPhone 4. I also have iCloud on all three devices. For some reason I can not get new information from my contacts folder to transfer to the iPad or the iPhone. Never been a problem before.

I have a Macbook, an iPad 2, and an iPhone 4. I also have iCloud on all three devices. For some reason I can not get new information from my contacts folder to transfer to the iPad or the iPhone. Never been a problem before.

POP: yahoo, aol, comcast/time warnder/road runner
Imap: google, hotmail, and more including icloud.
If you want to use multiple devices - move to imap, I would even say "exchange", but Google does not support free exchange anymore, since January of that year. So Ironically Icloud or Hotmail would be my choices right now.
To find out more about what happens to you, search on Google "difference between pop and imap"

Checking for file conflicts: could not get filesystem information

When I try to install a new package with pacman 4 I got the following warning just after pacman has done "checking for file conflicts":
warning: could not get filesystem information for /var/lib/ntp/etc/resolv.conf (deleted): No such file or directory
After the warning message is printed, the installation continues normally. This warning message has never shown up before.
I have ntpd running in a chroot as a non-root user (instructions).
I am wondering if anyone else gets the same warning message and if this 'problem' can be solved.
I forgot to say: the file is still there according to ls and is not empty, but the contents differs form the /etc/resolv.conf-file.
tim@tim-notebook:~$ cat /var/lib/ntp/etc/resolv.conf && echo && cat /etc/resolv.conf
# Generated by NetworkManager
# Generated by NetworkManager
nameserver 192.168.1.1
Last edited by timothy (2012-01-19 00:15:51)

I'm not sure how to do that or I do not know exactly what you mean.
tim@tim-notebook:~$ pkgfile -gs "*etc/resolv.conf"
core/filesystem
extra/archboot
But you probably already knew that.
Running pacman with the --debug option did not gave me any more clues. All I know now, is that this message is printed when the moundpoints are examined:
stderr 'pacman -Syu--debug' output wrote:(...)
debug: checking possible conflict: /var/lib/
debug: file is a directory, not a conflict
debug: checking available disk space
warning: could not get filesystem information for /var/lib/ntp/etc/resolv.conf (deleted): No such file or directory
debug: mountpoint: /var/lib/ntp/proc
debug: mountpoint: /var/lib/ntp/lib
debug: mountpoint: /var/lib/ntp/etc/services
debug: mountpoint: /tmp

Not getting column information while Function Import

i had followed below link
http://www.oracle.com/webfolder/technetwork/tutorials/obe/db/dotnet/EntityFrameworkOBE/EntityFrameworkOBE.htm
i m successfully able to update and add recored using Entity framework into oracle DB.
now my problem is with Select SPS here i follwed all step from above link with sql db and i m able to get column informatin while same is not possible with oracle db.
the stored procedure returns a ref cursor, so we can create a new complex type by selecting "Get Column Information" then selecting "Create New Complex Type".
but i m not able to have enable button for create new complex type becuase get column not return anything.
i had created model or .edmx file and then go to model browser where i had list of stored procedure not by double click on sp we will get one dialog box for function import
over there when ever i select sp and then get colum information i m not able to find any thing ,,,, while sp is running fine i test that too using sql developer,,,
and yes i had created complex property tooo but that columns are also not coming.........
i m new to this please help me where i m lacking.
PLEASE
Reference copy of my SP
PROCEDURE GETPERSONDETAIL(curParam out sys_refcursor)
IS
BEGIN
OPEN curParam FOR
SELECT
FIRSTNAME,
GENDER_CODE,
BIRTH_DATE,
LASTNAME
FROM PERSON;
END;
this sp is simple select statement...
Edited by: 875347 on Jul 27, 2011 2:23 AM

<?xml version="1.0" encoding="utf-8"?>
<configuration>
<connectionStrings>
<add name="HREntities" connectionString="metadata=res://*/HRModel.csdl|res://*/HRModel.ssdl|res://*/HRModel.msl;provider=Oracle.DataAccess.Client;provider connection string="DATA SOURCE=IRWORA;PASSWORD=irw#1234;PERSIST SECURITY INFO=True;USER ID=IRW01"" providerName="System.Data.EntityClient" /></connectionStrings>
i had taken same name as per link i.e. HREntities and HRModel all that
now pls check my settings are correct or not because my Datasource name is IRWORA and oracle username is irw01 so do i need to change that in baseschemaname which i defined as HR,,, and yes i put the same &quot do i need to change that i hav no idea for that .....
below is my app config for the same....
<oracle.dataaccess.client>
<settings>
<add name=""HR"."UPDATE_AND_RETURN_SALARY".RefCursor.NEW_SALARY" value="implicitRefCursor bindinfo='mode=Output'" />
<add name=""HR"."UPDATE_AND_RETURN_SALARY".RefCursorMetaData.NEW_SALARY.Column.0" value="implicitRefCursor metadata='ColumnName=FIRST_NAME;BaseColumnName=FIRST_NAME;BaseSchemaName=HR;BaseTableName=EMPLOYEES;NATIVE_DATA_TYPE=Varchar2;ProviderType=Varchar2;PROVIDER_DB_TYPE=String;ColumnSize=20'" />
<add name=""HR"."UPDATE_AND_RETURN_SALARY".RefCursorMetaData.NEW_SALARY.Column.1" value="implicitRefCursor metadata='ColumnName=SALARY;BaseColumnName=SALARY;BaseSchemaName=HR;BaseTableName=EMPLOYEES;NATIVE_DATA_TYPE=Number;ProviderType=Int32;DataType=System.Int32;ColumnSize=8'" />
</settings>
</oracle.dataaccess.client>
</configuration>
sorry i m very new to this ,,,,
please help me

Not getting Cost information when using /*+ RULE */ in toad 9.5

Hi,
While optimizing a query when I am using /*+RULE */ in the query I am not getting any info for cost and cardinality.
Can you tell me is the /*+RULE* / obsolete in oracle or what can be the reason.
Help me..
Thanks in advance.

948707 wrote:
Hi,
While optimizing a query when I am using /*+RULE */ in the query I am not getting any info for cost and cardinality.
Can you tell me is the /*+RULE* / obsolete in oracle or what can be the reason.
Why are you using that hint?
Aside from the fact that rule based optimization is obsolete, the optimiser can either do Rule based optimization or Cost based optimization. Why would you expect to get Cost based information when using Rule based optimization?
Don't use such hints. Cost based optimization is far superior to rule based.

Cisco Unity Connection 8.6 not getting CLID information from CUCM 8.6

Hello,
Currently Running:
Cisco Unified Communications Manager 8.6.2
Cisco Unity Connection 8.6.2
Problem:
when any outside caller leaves a voicemail, the caller number information is not being sent to unity.
example, I call with my cell phone, 817.555.1234 to my Cisco 7940 phone and it shows the CLID information that i am calling with. iDivert to voice mail, Leave a message. Playback message and just the default message information from Cisco Unity.
we currently upgraded from CUCM 6.1.3 and Unity 5. before i could press 9 and get the caller information.
I have viewed the "Playback Message Settings" and selected "After Playing Each Message, Play" and selected Sender's Information. and also selected "Include Extension and Sender's ANI"
upon playing the VoiceMail after the message i get the default message "From Cisco Unity Connection Messaging System"
I also have the message relaying to my E-mail and I get the same in the subject line.
"Message from Cisco Unity Connection Messaging System (Unknown extension)"
This tends to be a big deal with the Sales team as customers will call and say "Call me back"
But any Internal Calls show the correct information, proper greeting, extension information even on the relay to e-mail.
Any help will be appreciated.
Thanks
Tim

Found another post that referenced Cisco Bug ID CSCti37610.
CUC plays message is from Unity Connection Messaging system
Symptom:Before message playback, Unity Connection plays the message is from Unity Connection Messaging System instead sender's ANI
Conditions:Problem was observed on Unity Connection cluster and appropriate services are not rebooted after changing the SMTP domain name
Workaround:
Restart the Unity Connection servers
It should have been fixed in 8.5 but we did change the SMTP domain name on 8.6 and now see the problem. Will schedule a reboot and see if the issue goes away.

WRT1900AC Network map not displaying accurate information

Hi All,
For some reason my network map doesn't show correct information for example it's showing my server to be connected as a Wifi connection and has 3 of them.
It also shows a phone connected via a cable.
Currently running on Version: 1.1.8.164461
Which is the latest.

Just a bug. The server must have disconnected and reconnected 2 times and the previous connections were not removed from the list.
The strange thing is it's showings as both 2.4 and 5 Ghz connections. Is the server wireless adapter capable of both 2.4 and 5Ghz?
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

HP Photosmart 7510 "Could not get printer information from HP" NOT SOLVED

OK. So, I have searched all over the forums for a clear solution to this problem, and I have yet to see one that applies to my printer (HP Photosmart 7510). I have regestered the printer, selected 'everyone' in the allowed senders area, and am still receiving the same error message when trying to connect Google Cloud Print. Being able to print my google docs is EXTREMELY important... can anyone shed light on this?
If I have missed a post on my specific problem, I apologize for the double-posting.
Thanks

amp85,
The ePrint servers have been going through some heavy maintence here lately to upgrade the servers and it seems like it is causing issues with Google Cloud Print. I would keep trying and see if anything changes, it should resolve itself when the maintence has been completed. If you are still having issues after the next couple days, post back in here and let me know. Hopefully I'll have some more information about this issue by then if it has not yet been resolved.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

I am not getting cookie information in my iwtGateway logs

It is working now.
Actually, I had changed the debugging setting sin Platform from teh admin console to enable message debugging, but the platform.conf file had not got updated. I changed it manually to ips.debug=message and it is working now

Not getting accurate readings off a calibrated load cell

I'm using a Cooper Instruments 200 lb load cell connected to a SCB-68 connector box hooked up to a 6036e DAQ card, and I'm having trouble calibrating it. (I've done this before, but it's been a while, and something just isn't working right.) So, I'm using the calibration wizard (the channels are set as Custom Voltage with Excitation), hanging a bunch of known weights from the cell, entering the values, and all that is going fine. However, when I go to use the load cells (in a very simple VI that just reads the value from the cell), it's reading consistently low by 2-3 pounds. I'm using a 10 V excitation signal, and I set the low end of the Signal Input Range to 0 (it kept wanting to set -5=-5 in the calibration when the low end was -5V, and that was even worse). I've tried modifying a custom scale, and that isn't fixing the problem either. Has anyone encountered this before or have any ideas on what else we can try?
Thanks,
Eric Martell

Hi Eric,
This is a curious problem. Is it every point that has a constant offset or does the offset vary from point to point?
Also what is the model number and sensitivity of your load cell? Have you gotten it to read correctly before? You mentioned that the values were stable out to the fourth decimal place, but haw significant is this decimal place? For instance, when I open the calibration wizard, the values can jump around depending on what I am measuring. If you load cell has a sensitivity of 1 mV/lb, then this could be large variations depending on what the decimal point was when you saved the value.
With regards to my mentioning averaging, when you first click the calibrate button in the DAQ Assistant, the first screen has a Number of Samples to Average control and a Rate control. If you leave the # of samples to average at 1000, but change the rate to 10,000, do the values begin to vary?
Regards, Mallori M.
Mallori M
National Instruments
Global Customer Education Program Mananger
Calculate the time you will save with NI Training

Auditor reports not reporting accurate login information

Hi
The Auditor infrastructure and activity universe appears to be intact.
However all the auditor reports are not showing accurate information.
For instance the report showing user logins is not reporting all logins
for March and much of Feb. When I am sure there had been logins in
these months.
I looked at the ProdAuditDB audit_event table it has number of records
from these months with blank user_name. I am not sure if this is the
cause. But just FYI.
Any ideas what might be the reason or better yet how to fix it.
thanks
- sangeeta

Hi
The Auditor infrastructure and activity universe appears to be intact.
However all the auditor reports are not showing accurate information.
For instance the report showing user logins is not reporting all logins
for March and much of Feb. When I am sure there had been logins in
these months.
I looked at the ProdAuditDB audit_event table it has number of records
from these months with blank user_name. I am not sure if this is the
cause. But just FYI.
Any ideas what might be the reason or better yet how to fix it.
thanks
- sangeeta

An error occured while creating the new dataset Could not get type informat

Uses: Windows XP Pro SP3+; OracleXE; Oracle 8i Client; ODP.NET; Visual Studio 2005 PRO;
I had OracleXE and was using OracleXE's Oracle.DataAccess Version 10.2.0.100 which was located in C:\oraclexe\app\oracle\product\10.2.0\server\BIN. Then to use Oracle Developer Tools for VS, I installed ODAC where the Oracle.DataAccess's version was 2.111.6.20.
Everything connected via SqlPlus and even was able to Oracle XE Home page and was able to loginto it. Further, was even able to create connection with Oracle Dot Net Provider. The problem was created when I tried to create a datasource from DataSource Menu in VS.2005. It was giving an error saying "An error occured while creating the new dataset Could not get type information for dataset". However I wittnessed that Dataset is been created in Solutions Explorer but not in Data Source Tab. Further researching I was able to create Datasets with Microsofts Oracle Data provider with out any issue.
My Path variable list the following:
C:\app\Administrator\product\11.1.0\client_1;
C:\app\Administrator\product\11.1.0\client_1\bin;
C:\oraclexe\app\oracle\product\10.2.0\server\bin;
C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\;
C:\Program Files\Borland\BDS\4.0\Bin;
C:\PROGRA~1\Borland\Delphi5\Projects\Bpl;
C:\PROGRA~1\Borland\vbroker\jre\Bin;
C:\PROGRA~1\Borland\vbroker\Bin;
C:\PROGRA~1\Borland\Delphi5\Bin;C:\orant\bin;
C:\WINDOWS\system32;C:\WINDOWS;
C:\WINDOWS\System32\Wbem;
c:\Program Files\Microsoft SQL Server\90\Tools\binn\;
C:\Program Files\Microsoft SQL Server\80\Tools\BINN;
C:\Program Files\java\jdk1.6.0_07\bin.
Further I got 2 Oracle Homes one which C:\orant and other is located in C:\app\Administrator\product\11.1.0\client_1.
Also noted that while deploying at client site I started gett'n this error:
"Unable to install or run the application. The application requires that assembly Oracle.DataAcces version be installed in Global Assembly Cache First."
Is it due to change in the production machine? Any help in this regard is greatly appreciated.

Hi Pushpa,
Which enhancement package are you on currently? This is observed in cases where originals in DIR's are invisible and sometimes error message 26296 occurs in transaction CV01n. Hence,please check your entries in the table SDOKPROP to avoid such a problem in your system.
Further,suggest you explore if the below resolutions can be adopted in your case.
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=10321987
http://wiki.sdn.sap.com/wiki/display/PLM/OriginalsinvisibleafterEHP3or+EHP4
Regards,
Pradeepkumar haragoldavar

Could not find installation information for this machine

I tried to recover Mac OS X , but got message like this.
"Could not find installation information for this machine. Contact AppleCare."
I can not get detailed information of device because there is no system installed on Mac.
but I remember,It is intel iMac. ver 10.7. core 2 duo.
How do I install or recover system now?

Make sure that your network connection satisfies the requirements for Recovery or Internet Recovery, depending on which you're trying to use. If possible, connect to the router with Ethernet.
Restart the computer and try again.
Connect to a different network, if possible.
Wait a few hours and try again.
Make a "Genius" appointment at an Apple Store.

MC46 not getting accurate information

Similar Messages

Maybe you are looking for