MC87- create plan-Error: The evaluation profile SAP___A001 could not be read

Hi,
I am faceing error while saving SOP plan (MC87) in DEV server only. not in Quality Server.
Error:
The evaluation profile SAP___A001 could not be read
Message no. CY330
Thanks,
Jishu

Hi Nakul
thanks alot for the response.
APS is up and DF included in the APS services.
I also checked the SAP Note 1690334. But that error describes another error message.
I dont have any problem to create another relational connections like ERP6 or OLAP connections to connect BW.
Just having problem with SAP Netweaver BW JCO one.

Similar Messages

  • Time Machine error "The backup disk image could not be created"

    I'm trying to back up to an external hard drive on a home network (not Time Capsule). Time Machine appears to recognize the drive, and the correct amount of free space on it, but fails with the error "The backup disk image could not be created" after a lengthy "Preparing" wait. What's going on? Other applications are able to access this drive with no problems.

    I know Apple won't support other makes of NAS, but this post I found from Pondini worked for me.
    Hi, and welcome to the forums.
    Check your Computer Name at the top of the System Preferences > Sharing panel.
    It must not be blank; it should not be more than 25 characters long; and you should avoid punctuation, spaces, and special characters.
    After changing it, click the Edit button and make the corresponding change to the Local Hostname.
    If that doesn't help, apply the same rules to the name of your Time Capsule and Network, via Airport Utility.
    It was really as simple as that (after I had done such things as delete the sparsebundle file, created a new one, zeroed-out the new one, nightmare!)
    Problem seems to be with OS X's naming of Macs when you first set it up, as it creates a hostname "<yourName>'s Mac Book." When the NAS software (mine anyway) creates the sparsebundle image it replaces the spaces of the hostname with hyphens and strips out the apostrophe, which is never gonna work.

  • Time Machine Error:  "The backup disk image could not be created."  Help.

    I have two Macbook Pro's. One is able to backup to the Time Capsule with no problems. The other connects just fine to Airport Utility, but I get the following error after I attempt to backup: Time Machine Error: "The backup disk image could not be created."
    I have reset the Time Capsule several times, so that is not the fix.
    The first thing I see when attempting to open Time Machine is the following message: :The storage location for Time Machine Backups can't be found." It gives me the option to setup the Time Capsule, which I select. The next thing I select is to Change Disk. The window that opens has the Icon with Three people on it. The name of that Icon is The Moreman Time Capsule. I select it, and enter the password I created. I then choose to Backup. Then I choose to backup now. That is when I get the error: Time Machine Error: "The backup disk image could not be created."
    Any ideas? Has anyone encountered this problem?

    You have to delete the .dmg file and start over. This happened to me 3 times already, I finally switched to Déjà Vu, works perfect and only once a day instead of 24 times a day.
    http://propagandaprod.com/

  • I am using Mac OS X 10.7.5 as of now and when I am trying to upgrade to Mavericks, it is throwing error "The product distribution file could not be verified. It may be damaged or not signed".

    I am using Mac OS X 10.7.5 as of now and when I am trying to upgrade to Mavericks, the App Store is throwing error "The product distribution file could not be verified. It may be damaged or not signed".
    Is there anything I should do differently? Is anyone else facing the same issue?
    Kindly help.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac. 
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing. 
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects. 
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands. 
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply. 
    Launch the Terminal application in any of the following ways: 
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) 
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. 
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid. 
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign. 
    Step 1 
    Triple-click anywhere in the line of text below on this page to select it:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -ef 
    Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
    Step 2 
    Repeat with this line:
    { sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; echo; sudo defaults read com.apple.loginwindow LoginHook; echo; sudo crontab -l; } 2> /dev/null | open -ef 
    This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. 
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step. 
    Step 3
    { launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; echo; crontab -l 2> /dev/null; } | open -ef 
    Step 4
    ls -A /e*/{cr,la,mach}* {,/}Lib*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -ef  
    Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting. 
    Step 5
    osascript -e 'tell application "System Events" to get name of login items' | open -ef 
    Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output. 
    You can then quit Terminal.

  • Teststand 3.5 deployment error: "Error: The following file(s) could not be copied:"

    I am trying to deploy a project in TestStand 3.5 and I am using LabVIEW 8.2.  When I build my project, I always get the following error message "Error: The following file(s) could not be copied:".  Then it lists about 20 VI's that it is apparently unable to copy.  The VI's listed appear to be randomly chosen from the 8 LabVIEW libraries I included in my TestStand workspace file.  What are the possible reasons that TestStand is unable to copy these VI's?
    As a side note, I have successfully mass compiled all the VI's without any errors.

    Hello Casey,
    I have created a new workspace from scratch with some simple VI's that demonstrate the issue.  Please look at the attached folder that includes the code and a text file of the build status log.  This log looks a little different from my original, but it still has the same error.  This code was generated in TestStand 3.5 and LabVIEW 8.2.1.
    It appears to give this error on (some) files that have a decimal point in the filename.  This error started occurring when I upgraded from LabVIEW 7.1 to 8.2.
    Thank you.
    Attachments:
    Test 1.zip ‏47 KB

  • "Error: the xajax Javascript file could not be included. Perhaps the URL is incorrect? URL: /includes/javascript/xajax_js/xajax.js". other posters with a xajax error on this board got the response to go look for developer resources. (i'm not a developer)

    I'm on a mac running 10.6.8, was using Firefox 6.02 when the problem started, i performed a clean install of 7.01, installed the latest Flashplayer, and reinstalled java (the 10.6.5 update file from apple's site).
    I seem able to load video at youtube.com, and was able to load web-based irc chatrooms at ircchat.tv. however, at jamplay.com a paid member site, all of the lessons are flash video, and there's a live video feed chat room that is also flash based, and I am not able to view this content. the video content pops up the error message "Error: the xajax Javascript file could not be included. Perhaps the URL is incorrect?
    URL: /includes/javascript/xajax_js/xajax.js" and the clicking on the "launch chatroom" button does exactly nothing.
    I have contacted the jamplay site team but their recommendations are the steps I have already taken, mentioned above, that did not resolve the issue.
    some links to content on their site visible without being a member:
    http://www.jamplay.com/
    this one has a flash interface that, if things were working, would have a video in the center and members and staff talking abouth that area of the site when you click on one of the title buttons. Now that I am having this problem, nothing is clickable and there's no indication that there should be a video in the center. The error message regarding xajax does not come up at all.
    http://www.jamplay.com/guitar-lessons/beginners/1/527-16-circle-of-fifths
    same thing. video content is missing, xajax error does not appear.
    http://www.jamplay.com/live
    when I load these all content except the video loads on the page. this page does not give me the error at all, just does not load the video
    I can't seem to recreate the actual error without being logged in as a member of the site.
    The apple support team gave me a one-time free suppport ticket to troubleshoot an ethernet issue I was having. Unfortunately, the databases I removed were not deemed either by apple or me to be noteworthy or necessary to retain (all of them were for software I not longer have or use). I don't know which plist file might have been the one I need now. I did reinstall the java and flash items. The only other item that I think it might be is a set of belkin router software that I uninstalled because i'm not using any belkin hardware anymore.
    If someone has any kind of idea I would be most appreciative.

    That's a comment in the file. It has no effect at all.

  • Error: The e-mail server could not be reached when the system was trying to

    Dear All,
    I've configured the Mail Transport in Portal successfully with SMTP as MS Exchange Server and Third-party Mailing servers. But due to some licensing issues a new MS Exchange mail server have been setup replacing the existing ones.
    And when i configure the Mail Transport in the system i get the below message on the eMail Window:
    "Error: The e-mail server could not be reached when the system was trying to send the message!
    javax.mail.MessaginException: 530 5.7.1 Client ws not authenticated
    I've configured (all the steps) the same way as i used to before and restarted the server as well! Please let me know the issue to be resolved, the telnet to the mailserver is also successful. I've try'd searching SDN, didn't find the exact solution... any notes on this?
    Thanks,
    MS

    Hi,
    It will depend on your infrastructure, I am not sure and have limited knowledge on netowrks, but in my current landscape both the system were in same domain, but  still i had to maintain proxy configuration.
    Since it giving authentication error, it feel it could be proxy error.
    Please refer below links which talks about same error :
    http://java.sun.com/products/javamail/FAQ.html#smtpauth
    Or else i think it is issue with port.
    Regards,
    Jigar Oza
    Edited by: jigar oza on Jul 6, 2010 12:43 PM

  • Hi, l authorized my computer using iTunes and it said successful, but when l start syncing my applications l get this error: "The iPhone "My name" could not be synced because this computer is no longer authorized for purchased items that are on this phone

    hi, l authorized my computer using iTunes and it said successful, but when l start syncing my applications l get this error: "The iPhone "My name" could not be synced because this computer is no longer authorized for purchased items that are on this phone".
    May you help
    Thanks

    Try TS1389: iTunes repeatedly prompts to authorize computer to play iTunes Store purchases.
    tt2

  • Error: "the song...could not be used because the original file not found"?

    Has anyone seen and resolved the issue from this error: "The song...could not be used because the original file could not be found"?
    Thank you for your help

    Yes, with no luck ... But I'm not exactly a computer tech. I searched with spotlight with no results.

  • Error The following product(s) could not be activated

    Can somebody help me, I received this error while I'm trying to activate the said product.
    NI Product Activation 
    Step 2: Review Your Confirmation 
    Error The following product(s) could not be activated 
    National Instruments is unable to provide activation codes for the following items in your request. Possible causes could include: serial number was not found; serial number was found, but does not match feature/version; serial number is found, but is not yet active. 
    Serial Number Product Version   
    xxxxxxxxx Vision Acquisition 8.6   
    Serial number is not found, is found but does not match feature/version, or is found but not yet active   

    Time to talk to NI.
    Sometimes corporate firewalls can cause problems with activations.

  • My Time Machine / Time capsule gets the error:  The backup disk image could not be mounted

    My time machine / time capsule gets the error:  The backup disk image could not be mounted.

    Reboot the TC.
    If you normally have multiple computers backing up, under Lion there seems to be some issues.. you need to force other users off the system. You can do that through the Airport utility, manual setup, disks, disconnect all users. Note carefully if you use Lion you probably need to download the real airport utility.. 5.6 to accomplish anything useful.

  • ERROR - Status of posting run could not be read - TV

    Hi,
    I've a problem at PR05 transaction. When I select a down payment line I receve the message below:
         Status of posting run 0000054529 could not be read
         Message no. 56820
         Diagnosis
         The trip is assigned to a posting run (significant for transfer to accounting) for which the current accounting status could 
         not be read.
         System Response
         For security reasons, the system does not allow changing or canceling of trips with undefined accounting status.
         Procedure
         Try to repeat the action later or inform your system administrator.
    The FI Document was generated. I believe that something happend to SAP after PRRW generated the FI/CO Documents.
    The question is how can I Create a Travel Expense Report (TRIP) in order to clear the dow payment with this problem happening?
    PS: SAP ECC 6.0
    tks

    Answered my own question. After I thought I had tried everything, it occurred to me to Verify Disk. Doing so revealed a minor bitmap error. So, using my trusty install disk, I booted my machine to the disk and repaired it.
    After the repair, I started iTunes and was able to download my songs. Unfortunately, my original library file was permanently damaged, so I had to start with a clean one. However, if the worst thing to happen to me in all this is that I have to redefine my playlists, then I'm better off.
    I hope this thread helps someone in the future.

  • Error - The attributes for user could not be determined

    When I login as a Buyer (with role ZTSX_EC_BBP_PURCHASER - copy of SAP_EC_BBP_PURCHASER), I get the foll. error while trying to Process Purchase Orders:
    The attributes for user could not be determined
    It does not happen on other transactions (like Sourcing or Issue POs).
    The buyer is in the org. plan and I have checked the attributes and they seem ok.
    What could be the issue ???
    Thanks
    -Bakulesh

    Hi
    <b>Please go through these links -></b>
    The attributes for user could not be determined --
    'Error in writing attributes' when using function tab
    Company code for system missing in user attributes
    BBP_POC not working in SRM 5.0
    Re: urgent: regarding ATTRIBUTES
    Regards
    - Atul

  • Time machine error: The backup disk image could not be mounted

    Time Machine worked OK for several months. Now I get this error every 10 minutes or so.
    I unplugged Time Machine capsule and "Change Disk" in Time Machine options.
    Nothing helps, I continue to get this error.
    I cannot Enter Time Machine either. "Connecting to Server, Connecting to backup" does not work.
    Help please because I will probably have to archive and reinstall Leopard. I need the backups,
    Christine

    Christ1ne,
    Before you reformat the disk, consider these causes of this error.
    *_"The Backup Disk Image Could Not Be Mounted" (Console - “Failed to mount disk image”)_*
    First, it is important to distinguish this error message from another, similar Time Machine error that states “The backup volume could not be mounted”. This is important as the causes and cures for these two errors can be very different.
    Consider each topic below separately. When one option does not resolve your issue, then move on the next one.
    *Unmount the Backup Disk Image* (TC)
    If, for some reason, you have manually mounted the Time Machine backup disk image (sparsebundle), or Time Machine failed to eject it after the previous backup, subsequent backups may fail. (Console - “Failed to mount disk image”… “Backup failed with error: 21”)
    Eject the backup disk image (white drive icon) by either clicking the little Eject icon to the right of the disk image in the Finders’ Sidebar, or Ctrl-Click the drive icon on the desktop and select “Eject” from the contextual menu. Now try backing up again or launching Time Machine to view previous backups.
    *“Disconnect All Users…”:*
    If your Time Machine backup drive (“Backup of Users Computer”) is mounted on your desktop or in the Sidebar of the Finder window. then Time Machine may think the drive is already in use. Alternatively, if the Time Capsule hard disk has been recently accessed by a Windows machine, it may not have fully relinquished control. Do the following:
    Open Airport Utility and select the Time Capsule on the left.
    Click “Manual Setup”.
    Select “Disks” at top of window.
    Click “Disconnect All Users…” at bottom of window.
    Close the Airport Utility.
    Now try Backing up again.
    One poster reported: “I got it resolved. Apparently it had to do with one of the files being open on the disk from the drive. I had browsed the disk with one of my windows boxes here and it must have left one of the folders "open". Anyway, I rebooted the TC and we are good to go now.”
    *Proper Computer Name* #
    Make sure your computer has a proper name. Go to System Preferences --> Sharing. Time Machine needs to differentiate your computer from others on your network (i.e. "Bills MacBook" or "Office iMac"). If the "Computer Name" field is blank, create a name. Realize that if this step is necessary, you will likely have to start the Time Machine backup process over again and do another full initial backup.
    According to this article, [http://support.apple.com/kb/TS1760], Time Machine may experience problems if your computer name includes certain characters. Make sure the computer name only includes ASCII characters from the following set.
    (0123456789abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ)
    Once a change in the computer name occurs, you should stop and restart Sharing on the affected computer. Uncheck and then recheck Sharing in the Services list on the left.
    # Try removing the apostrophe from the disk images name (sparsebundle).
    *A Stalled .inProgress Files:* #
    It may be that the previous backup attempt was ungracefully interrupted leaving remains that Time Machine can’t deal with.
    Stop any current backup attempt. Choose “Stop Backing Up” from the Time Machine menu.
    Open the Time Machine Preferences and turn “OFF” Time Machine.
    Open your Time Machine drive.
    Open the folder labeled “Backups,backupdb”.
    Now open the folder containing backups of the computer in question.
    Are there any “.inProgress” files there. Delete them by dragging the file to the Trash. Or Ctrl-Click the file and select "Move to Trash" from the contextual menu. (Give this time as deleting a large file on an external disk can take a while.)
    Turn Time Machine back “ON”. Now try backing up again.
    NOTE: If the above procedure becomes impossible to perform, try accessing the disk image from another Mac. Some have discovered that attempting a repair from another computer succeeds where the original computer failed.
    Let us know if any of the suggestions above helped to resolve your issue.
    Cheers!

  • ERROR: The Windows Installer Service could not be accessed. This can occur if the Windows Installer is not correctly installed. Contact your support personnel for assistance.

    Hello Everyone,
    I keep getting this when trying to install 0r repair SQL Server 2008 R2 on a SBS  2011 Standard.
    TITLE: Microsoft SQL Server 2008 R2 Setup
    The following error has occurred:
    The Windows Installer Service could not be accessed. This can occur if the Windows Installer is not correctly installed. Contact your support personnel for assistance.
    For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1&EvtType=0xDF039760%25401201%25401
    BUTTONS:
    OK
    the provided link says  "There is no additional information about this issue" i am helpless
    please tell assist.
    Thanks.
    Abdallah.M.M

    Hi Abdallah,
    According to your description, could you please post the summary and detail logs for further analysis? By default, the logs can be found in: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log.
    Usually, the error occurs when the Windows Installer Service is not running or the Windows Installer registry settings are corrupted.  I recommend you reset the Windows Installer Service settings in the registry and restart the Windows Installer Service,
    then reinstall SQL Server 2008 R2. For more details, please review this similar
    article.
    Thanks,
    Lydia Zhang

Maybe you are looking for