MC94 Disaggregation in Level by Level Planning

Dear All,
I have created a self defined info-structure
Characteristics
Key Figures
Sales Organization
Sales
Distribution Channel
Production
Division
sold-to party
Product Group/material
Plant
I have done all the required configurations:
Assigning the planning parameters to the info structure. – MC7F with planning method I (Level by Level Planning) as with Product groups only level by level planning is applicable
Creation of Planning Hierarchy – MC61
Creation planning type - MC8A
After that in MC94 (Change Plan in Level by Level Planning), I am able to perform disaggregation only till Sold- to party. After sold to party, I am not able to dis-aggregate it further down to product group. I have maintained the product group below sold-to party in hierarchy as well. Please suggest.
Regards
Ashish

hi Ashish,
@ as mentioned by Mariano, please check the total % of the proportional factors.
either you want it to be 100% or more or less...depends on project requirement....
regards,
Sandeep

Similar Messages

Levels in org plan

hi
i have seen some levels in org plan like SAG, COS, REQUISITION.
may i know what it does and purpose.
regards
srmsri

please browse the org structure via PPOSA_BBP.
It is the backbone of SRM. It maps the organisation data with backend
For EG.
Company
              - > Purchase Organisation
                                          -> Purchase group
Dept
       --> Users
And it has all defined attributes value to help to create a business objects in SRM.
regards
Muthu

Cell-Level Documents in Planning 11.1.1

Would I need to use the EPMA front-end to be able to use the cell-level documents in Planning forms feature or could I get this feature using classic administration? Thanks in advance.

Hi,
It applies to both classic and epma planning applications.
Cheers
John
http://john-goodwin.blogspot.com/

Copy: Level-by-level planning type

Hi,
I was wondering if someone has carried out a copy in SOP from one Info structure with Level-by-level planning type to a second Info structure also with Level-by-level planning type.
This kind of copy is not supported by the SAP standard.
Thanks in advance and best regards.

Try OLIX transaction

Level by Level Costing

Hi,
Is it required to do any configuration for setting up level by level costing in product cost planning? I mean any configuration is needed so that the system takes care of costing RMs & purchased parts first, SFG later & finally FG.
Thanks

In a costing run, that is used for costing mass cost estimates, there is a second step called structure explosion. This provides the level (numeric assignment) controlling the sequence, in which the materials are costed, in order to provide a cost rollup over multi levels.
The costs are rolled <b>up automatically</b> using the costing levels. No config required.
The system first calculates the costs for the materials with the lowest costing level.
The materials in the next highest costing level (such as semifinished materials) are then costed. The costs for the materials costed first are rolled up and become part of the costs of goods sold in the next highest level.
This process is continued until the costing results of the highest material in the structure (such as the finished product) contain the cost of goods manufactured for every material in the structure.
At each level the costs are assigned to cost components.
In an example of a final material that has two semi-finisied goods and four raw materials, The raw materials are assigned level 1, the semi-finished goods are assigned level 2 and the final assembly is given level 3. When you run the cost estimate, Level 1 is costed first followed by 2 and 3.

SOP: Copy Level-by-level to Level-by-level

Hi,
I would be very grateful if someone could give some explanations (maybe tutorials), examples or just simple advices about how to implement a copy from one Level-to-level information structure to another Level-to-level information structure in flexible planning in SOP?
Thanks in advance and best regards.
Ben.

Hi
Can you pl. be specific as to what do you want to copy.
whether data to be copied form in infostructure to the other, or the infostructure itslelf copy & creat new one.?
Regards
YMREDDY

Supply Area-BOM Level by Level

Hi Folks,
I am having a problem in fetching the Supply area when a Component is having many sub-assemblies.
To be in detail,
I am fetching the DISTINCT Production Order(AUFNR) from MSEG w.r.t to MBLNR and MJAHR.
Then w.r.t to this AUFNR I am fetching the BOM category(STLTY) and BOM (STLNR).
Then w.r.to this STLTY and STLNR I am fetching the Supply area(PRVBE).
If the supply area is maintained at this level,then fine.If this BOM is having many sub-Assemblies and the supply area is maintained at a different level then we need to explode that BOM step by step and fetch the Supply Area.
To be precise CS11 gives the Supply Area according to the BOM Level by Level.I just wanna fetch the Supply Area as per that.Do anyone here has an idea about how this functionality can be achieved.
I am trying to find by debugging CS11,any valuable inputs from experts here will be helpful.
Thanks,
K.Kiran.

Prabhu,
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
          EXPORTING
                CAPID                        = 'PI01'
                DATUV                       = v_aufld
                MKTLS                       = 'X'
                MEHRS                      = 'X'
                MTNRV                      = wa_afko-plnbez
                STLAL                       = wa_afko-stlal
                STLAN                       = wa_afko-stlan
                STPST                       = 0
                SVWVO                     = 'X'
                WERKS                     = wa_afko-werks
                VRSVO                      = 'X'
            TABLES
                  stb                           = bom_exp
            EXCEPTIONS
                   ALT_NOT_FOUND               = 1
                   CALL_INVALID                    = 2
                   MATERIAL_NOT_FOUND     = 3
                   MISSING_AUTHORIZATION = 4
                   NO_BOM_FOUND                = 5
                   NO_PLANT_DATA                = 6
                   NO_SUITABLE_BOM_FOUND      = 7
                   CONVERSION_ERROR               = 8
                   OTHERS                                     = 9.
Got it.We missed out DATUV,MEHRS fields while executing.
Thanks,
K.Kiran.

Just I want to know What is 1st level & 2nd level support

At client place on shore in production support project in as What is 1st level & 2nd level support?
and Nature of work
Thanks in advance
Edited by: Arun Varadarajan on Feb 5, 2009 2:34 PM
Edited by: Arun Varadarajan on Feb 5, 2009 2:37 PM

I would still defend myself saying that this has already been answered...
I just did a search on SDN and found a post that would answer your question....
Re: Help desk& rollup
you are looking at L1 and L2 support....
The thread was locked because the question is already answered ( or discussed about ) in another post and you can get your answers faster by just searching....
Also if you do find the answers fetched as not being correct or accurate enough - you would need to mention that you did search the forums before posting. This way questions which have already been answered are not brought up again and it ends up with others doing the searching for you which paints a wrong picture...
Also in some cases L1 teams are merged with the company's existing L1 support desk to avoid confusion but follow similar rules as mentioned in the link and simlarly L2 - when you have multiple systems being supported by a central support team you get such scenarios where L1 and L2 are on-shore.
My 0.02
Arun Varadarajan
P.S I am removing the reference to my name in the title... and BTW the search took me less than 2 minutes ... which is why we want people to use the search functionality more than raising duplicate posts....
Edited by: Arun Varadarajan on Feb 5, 2009 2:35 PM
Edited by: Arun Varadarajan on Feb 5, 2009 2:36 PM

Is it Possible to define Levels within Levels in a Dimension

Hi is it possible to define Levels within Levels in Dimension??

Hi is it possible to define Levels within Levels in Dimension??

Binary Tree (insert level by level)

Hello,
I'm trying to program a binary tree. It's totally clear for me to insert new (Integer) Values in an ordinary binary tree.
I simply have to check if the root is equal (--> ready) smaller or larger than the value. I repeat this until I reached a leaf and then I insert a new node.
BUT:
My teacher gave me following problem: Inserting values level by level. The first element is the root, the leftson of the root is nuber2 the rightson of the root is number3
The leftson of root's leftson is number4, the rightson of root's leftson is number 5, the leftson of root's rightson is number 6 and so on.
I have NO idea how to program that.
For example: the 23rd element is in the tree: left, right, right, right, whilst the 24th element is right, left, left, left.
I cannot find a recursive structure, that solves the problem.
Perhaps YOU can save me from gettin' mad ;o)
I really hope so.

It's not quite clear what you mean by level-by-level (at least not to me). The structure of a binary tree depends in the insert order. If you insert 1,5,2,8 the tree will look different to when you insert 1,2,3,4. In the last case the tree actually has degenerated to a linked list (there are only rightsons).
Now, to minimize the number of levels (if that's what this is about) there's a technique called balancing. In a perfectly balanced binary tree each level is filled before a new level is started. This is quite complicated. Search the net or look in some data structures textbook for balanced binary trees.

Basic Information about Organizational Level & Org. level value.

Hello Experts,
I am new to the field of SAP and security. I have the following questions:
1. What is an organizational level & org. level value? What do they represent? How do they matter in PFCG?
2. What is a derived role and what is its usage?
I appreciate your help regarding this. If you could point me to some documentation regarding this that will be very helpful.
Regards, Ben

Ben,
I am new to the field of SAP and security. I have the following questions:
1. What is an organizational level & org. level value? What do they represent? How do they matter in PFCG?
if you want to restrict on region vice (best use org level & values (plant,company code, sales org)
In role u will notice them in red color
2. What is a derived role and what is its usage?
Derived role inherits menu struture and the function from the parent role. Derived role do not differ in their functionalities(identical menu & trans) but have different characterticts with regard to Org levels.
Eg1; Master role
PFCG -> role name -> create->menu->enter tcodes-.Auth tab->export mode->read old status and merge with new data->Pop for org levels (give a full access)->see to that everything is green->generate it.
http://e-mory.blogspot.com/2007/12/sap-pfcg-create-role.html
Eg2: Derived role
pfcg->role name->create->in describtion tab towards right enter the master role name->Auth tab->export mode->read old status and merge with new data->you will get a pop for org levels (here you can restrict on plant lvel,purchasing group,company code....)
->let say for plant : 1000 ->generated / user comparssion
Once the role is added to the user. User will be albe to see only those plant related details (1000) (i.e he will have access to only plant 1000)
suppose if the user enters 2000,he will get a error message saying no access to 2000
NOTE: Any changes to the role should be done in master role (like adding tcodes)
.http://www.rssfeeddirectory.org/directory/items/346239.aspx
https://cw.sdn.sap.com/cw/docs/DOC-12021
http://help.sap.com/saphelp_wp/helpdata/en/1c/c38028816c11d396bc0000e82de14a/content.htm
Re: Authorization error after transport
Thanks,
Sri

How dynamically get an agent f a level-by-level workflow after PO changed

Hi all:
     I'm trying to create a level-by-level workflow after PO changed, but how dynamically get an agent and how assign it to
task dynamically?
    Thank you very much!!!

Hi Sony,
There are diffrent ways to get agent level by level....it depends from where you are getting the agents.
1>Suppose you have 2 level PO worklfow and my agents are stored in some custom table:-
    level1 -- agent1
    level2 --agent2
2> You can create two attributes in your BO i;e zgent1& zagent2.
3> Inside the attributes zagent1 u will get the actual agents from custom table by putting code
   i.e select agent1 into zagent1 from zcus_tab where level = 1.
4> Inside the attributes zagent1 u will get the actual agents from custom table by putting code
   i.e select agent1 into zagent1 from zcus_tab where level = 2.
5> Now generate the BO...and test it ..u will se the user id of agents in the attributes populated.
6> Now bind these both attributes to workflow container.
7> Use attribute ZAGENT1 for level 1 approval task in worlfow.
8> Use attribute ZAGENT2 for level 2 approval task in worlfow.
The values will comes dynamically from custom table...which u will maintain.

Credit management at order level ,delivery level and PGI Level.

Hi All,
I have a scnario where in at the order level i want to give a wariniog message ,at the delivery level again a warning message and at the pgi level the system should stop me form doing PGI!kindly specify the settings.
Second Scenario:Error at order level ,delivery level.
Regards
RKM

HI,
First u assign credit group as 03 at pgi level in that particular sales order type in VOV8 document functionaliyt..
If you are using simple credit check then Put error message there in credit check field of VOV8..
In case of automatic credit check then please go to OVA8 t.code there u put reaction as warning message and then status as blocked...
Regards
sankar

Binary tree    (level by level insert)

Hello,
I already posted this artivle in the Forum "Java Programming" because I'm new to the Forum and didn't see the Algorithms part.. Sorry for the double posting.
I'm trying to program a binary tree. It's totally clear for me to insert new (Integer) Values in an ordinary binary tree.
I simply have to check if the root is equal (--> ready) smaller or larger than the value. I repeat this until I reached a leaf and then I insert a new node.
BUT:
My teacher gave me following problem: Inserting values level by level. The first element is the root, the leftson of the root is nuber2 the rightson of the root is number3
The leftson of root's leftson is number4, the rightson of root's leftson is number 5, the leftson of root's rightson is number 6 and so on.
I have NO idea how to program that.
For example: the 23rd element is in the tree: left, right, right, right, whilst the 24th element is right, left, left, left.
I cannot find a recursive structure, that solves the problem.
Perhaps YOU can save me from gettin' mad ;o)
I really hope so.

But can you think of a recursive code to solve the problem????????Ok, here's another hint -- take that node 23 again as an example. If you write out this number in binary (10111) and skip the leftmost 1 in this pattern (x0111), start reading from left to right, starting at the right of th 'x'. 0 denotes left, 1 denotes right. Does that ring a bell?
Something like the following (pseudo code) should come up --
insert(Node node, int val, int pattern, int bitmask) {
   if (bitmask == 1)                  // we have to insert now
      if ((pattern & bitmask) == 1)   // insert right
         node.right= new Node(val);
      else                            // insert left
         node.left= new Node(val);
   else if ((pattern & bitmask) == 1) // move right
      insert(Node.right, val, pattern, bitmask >> 1);
   else                               // move left
      insert(Node.left, val, pattern, bitmask >> 1);
}Some bits and pieces are left as an exercise ;-)
kind regards,
Jos

How to traverse level by level in tree

Wondering if there were any suggestions on how to efficiently traverse through a tree level by level.
Here is my code for creating the tree.
public static void main(String[] args)
          String userInput = "";
          StringTokenizer tokenizedUserInput;
          int numAdd = 0;
          STree<Integer> completeTree = new STree<Integer>();
          Scanner keyboard = new Scanner(System.in);
          System.out.println("Enter values for tree: ");
          userInput = keyboard.nextLine();
          tokenizedUserInput = new StringTokenizer(userInput, ", ");
          while (tokenizedUserInput.hasMoreTokens())
             numAdd = Integer.parseInt(tokenizedUserInput.nextToken());
             completeTree.add(numAdd);
        }

I have found a method to traverse through the tree level by level but it takes in a parameter of a node. I'm
not sure how to take my tree and pass it through the method. Here is the method:
public static <T> String levelByLevel(TNode<T> t)
          LinkedQueue<TNode<T>> q = new LinkedQueue<TNode<T>>();
          TNode<T> p;
          String s = "";
          q.push(t);
          while(!q.isEmpty())
               p = q.pop();
               s += p.nodeValue + " ";
               if(p.left != null)
                    q.push(p.left);
               if(p.right != null)
                    q.push(p.right);
          return s;
}

MC94 Disaggregation in Level by Level Planning

Similar Messages

Maybe you are looking for