McAfee EEMAC Login pass through
Our Security team at my company wants to install McAfee's Endpoint Encryption on our Mac laptops. Our Macs are bound into AD and end users login with a user ID and password.
McAfee's Endpoint Encryption login modifies the boot process so that the user logs into McAfee first (AD user ID and password) and then gets to the Mac login screen. I'm wondering if anyone else has a similar configuration, but has developed a login hook to pass through the McAfee user authentication to the Mac's login so the end user only has to login one time.
Any advice is appreciated... thanks!
Two problems with trying that:
a) Not an available option If Iopen the control panel I see eight options: System & Security, Neytwork & Internet, Harware & Sound, Program, User Accounts and Family Safety, Appearance and Personalization, Clock, Language, and Region, and Ease of Access. No "Change Bionmetric Settings".
This Winodws 7 Pro 64 bit
b) I could have done more on introduction but didn't see the need. While these little computers aren't THAT familiar to me I am retired from decades in the cypher mines in the world of large mainframes. So Iknow SOMETHING about the problem. When Windows is booting up it will start a number of tasks (services) ending with the one that will prodiuce the log in screen. Or in this case, two such routines, one first dsplaying the fingerprint log in screen, then, after a few seconds, running another routine that brings up the normal password sign in screen. At least, that's what happens wen it doesn't "stall" .
I am asking if anybody can tell me how I turn off the first. It isn't clear that turing off the device that this first routine is trying to access wouldn't make things even worse (unclear that disabling thdevice would remove the routine from the liust of things Windows does when coming up -- perhaps the "stall" is even relted to it not getting a "ready" response form the fingerprint reader).
I am new to Windows7. If still under Windows XP I know there is something that I run that brings up the "things to do while starting up" where you can check or uncheck things (I'd have to find my notes to give more details) but I don't know what that would be under Windows 7 nor, if I got there, the name of the "fingerprint log in" routine to uncheck nor the name of the routine to check that devices without a fingerprint reader would use.
PROBLEM STILL OPEN
Similar Messages
-
X200 under Windows 7, fingerprint login pass through stalls
(sorry, new to the forum --- I think this way of expressing the subject will be less likely to be ignored)
This is a new machine for us as well as a new operating system.
We aren't using the fingerprint login and don't intend to. Usually when the machine boots into Windows first the fingerprint log in screen appears, but in a few seconds passes throgh to the password signin. But not always. Sometimes "stalls" in the fingerprint screen. There I can use "swicth users" and can log in with the supervisor account password but not a user account without administrator rights (it still wants a fingerprint and says not available)
Can somebody tell me if I can completely turn off the fingerprint log in screen and if so, how. I assume that would be unchecking something in the Windows start up but being new to 7 I don't even know how to look for it.Two problems with trying that:
a) Not an available option If Iopen the control panel I see eight options: System & Security, Neytwork & Internet, Harware & Sound, Program, User Accounts and Family Safety, Appearance and Personalization, Clock, Language, and Region, and Ease of Access. No "Change Bionmetric Settings".
This Winodws 7 Pro 64 bit
b) I could have done more on introduction but didn't see the need. While these little computers aren't THAT familiar to me I am retired from decades in the cypher mines in the world of large mainframes. So Iknow SOMETHING about the problem. When Windows is booting up it will start a number of tasks (services) ending with the one that will prodiuce the log in screen. Or in this case, two such routines, one first dsplaying the fingerprint log in screen, then, after a few seconds, running another routine that brings up the normal password sign in screen. At least, that's what happens wen it doesn't "stall" .
I am asking if anybody can tell me how I turn off the first. It isn't clear that turing off the device that this first routine is trying to access wouldn't make things even worse (unclear that disabling thdevice would remove the routine from the liust of things Windows does when coming up -- perhaps the "stall" is even relted to it not getting a "ready" response form the fingerprint reader).
I am new to Windows7. If still under Windows XP I know there is something that I run that brings up the "things to do while starting up" where you can check or uncheck things (I'd have to find my notes to give more details) but I don't know what that would be under Windows 7 nor, if I got there, the name of the "fingerprint log in" routine to uncheck nor the name of the routine to check that devices without a fingerprint reader would use.
PROBLEM STILL OPEN -
OBIEE and Essbase security pass through
Hi All,
I'm using Essbase as a data source for OBIEE. Right now I'm trying to use Hyperion security to pass through OBIEE. I've setup OBIEE to use Hyperion Shared Services as custom authenticator and Hyperion users can log in. However, I'm having problem passing through the users to Essbase. I've changed the Essbase connection pool to use :USER and :PASSWORD. When I tried to check for global consistency, I'm getting the following error
[38098] The password in the Connection Pool '"server"."Connection Pool"', associated with the Repository Initialization Block '"SUB_VAR_BLOCK_server"', contains the use of :USER or :PASSWORD.
When I tried to open any existing Essbase reports from OBIEE, I'm getting this error (as expected)
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. Essbase Error: Login fails due to invalid login credentials (HY000)
Any ideas on how to get around this issue? Thanks
Regards,
GerdHi Gerd,
Could you please explain in detail how you have setup OBIEE to use Hyperion Shared Services as custom authenticator so that Hyperion users can log into OBIEE?
Please provide the steps and custom authenticator function?
we would need to implement it fromm scratch. So, your help will be greatful. -
how do i set login ID,pass to a PC in a LAN through java code ?
i visited URL class but not found any method to set login,pass....
here is wrong code but i want to make it correct
try {
java.net.URL url = new java.net.URL("//john"); // johm is a PC in LAN
url.set("john","password");
System.out.println("u r connected");
} catch (MalformedURLException e) {System.out.println(e);
}how is that possible ?Sometimes I think you are troll.
/Kajone day you told "never give up" today you are giving me a tiltle "troll"......
do you think by posting these questions i joke with you people ? i dont do it....beleive me i dont do it. i read all posts, i keep those as watches....do you know how much proud and glad i become when i get an answer from a developer like you,like jverd,like jos, like drlaszo..,ceci,like malcommc,steve,evanfets,...?
why cant i be like you one day ? you have helped me a lot. i am very much grateful. without that support it remained very much difficult to
me to be what i am now.
the post you make becomes a resource for me.....i am very much slow learner....it is a rigorous time balance for me to cut out some time and read java....but everyday i do it routinewise. you learn 100 concepts in a day, whereas i learn 1,1/2 or 0 concepts sometimes in a day. if i get to know some new info thats become a active and joyful day to me.
I am not a crap....i post with a good intention to know more. how much do you know about me ? nothing . how much do i know about you ? nothing....there are some things which i know but you dont know, similarly there are some things which you know but i dont know. our communication is limited here only...but there are some impression which always remains in our mind...
there are some people who posts answers to OP by looking at their number of posts,past records,..so many lists. some of them apply the principle ,the same principle on me. However earth is nice because some good man still exists.
i remeber a day which is a memorable day when i first signed up here. i posted a question on "object". because i was in a tango with C and java. many people bluffed at me. i was about to leave the forum. but jverd posted a solid answer which was a highly appreciated answer. i understood that there are some people exists here who are the masters. after that, i came to know you,malcommc,jos,Drlaszo..,CECI,Annie,duffy,steve,evan,...
wrting a program, is not a very much big deal . because , search google , you are to get all codes if you like. even you can copy code from your book. i have almost > 2GB pdf book. cut,copy,paste, reuse standard code. i feel my legs are tied when i see a book is hiding something from you and telling you a thumb rule. with that,you can code quickly...but it always seems to me , that i can not come out from a circle which they created. they will tie your hands,legs and kill your imagination.
Sir, i can assure you that i am not a troll...from your language i find a derogatory,ignorant attitude towards me though i keep a high image about you.....it started a mixed reaction in me.... if you want my ouster from the forum, i will look for a vote from 4 senior members(including you) in this forum....i will be finished.
N.B : forget about my original question .thats closed.
bye -
Hi
I imported a big update.xml with pass-through authentication configuration ... Now I can't log in web admin console as configurator. How can I disable the great pass-through?
Big Thanks
JXXEHey JXEE,
This is in case still you haven't solved the passthrough, configurator login problem.
I once faced a similar situation, where when one of our administrators configured passthrough login. What he did was, while creating the "passthrough login module group", he added the "resource Login Module" to the "passthrough login module group" but removed the "Default Lighthouse Login Module" from the group. After that the users can login to IDM using the resource login password but configurator could not login at all as the "Default Lighthouse Login Module" was removed from the Login Module Group.
After trying so many options the only thing that worked for me was, preserving the IDM repository, which in this case MySQL, to preserve already created users, roles, resources etc. and then preserving WPMessages.properties, styles.css and images folder to preserve the customization and then reinstalling Sun IDM. By making the new IDM installation to point to the preserved repository and overwriting the new WPMessages.properties, Styles.css and images folder with the preserved WPMessages.properties, Styles.css and images folder I managed to restore the IDM properly.
Looks like you too have similar problem. Hope this procedure would work for you. One reminder though, you may want to create the problem in a test environment and try this remedy before you try it on your production.
Hope this would help.
Thanks,
SunCrazy -
Login Redirection through SYSTEM application
Hi,
I'm using the standard SYSTEM application to perform the Login redirection. The redirection works fine in normal cases. However I face problems when I pass some parameters in my original URL.
Consider my app URL is: http://testsystem/sap/bc/bsp/sap/test/default.htm?bookid=1000 During login this gets redirected to url /sap/public/bsp/sap/system/login.htm?sap-url=<%=PATHTRANS%>
The login happens here, but after that, the parameter "bookid" got removed from the original URL.
Why does this happen?
Is this the standard system behaviour? Or am I missing something?
How else can I pass parameters to the URL while still retaining the login redirection through SYSTEM application?
Regards,
PradeepHi,
I'm successful passing parameters with the code mentioned in /people/eddy.declercq/blog/2005/11/15/enemy-of-the-state
Eddy -
Pass through credentials on ipad
I have a SharePoint Calendar that users are viewing on their IPAD, and I have the link to the Calendar saved as an icon on their home screen.
But everytime they open it they have to login with their username and password on the MS Forefront TMG login screen, to get to the SharePoint Calendar.
Is there a way to pass through their login credentials to this SharePoint Calendar, so they can by-pass logging everytime?
thanks!Hi,
According to your description, my understanding is that you want to pass logging the user credentials when accessing the SharePoint Calendar.
I suggest you can check if TMG has some option to remember the credentials.
TMG forum:
https://social.technet.microsoft.com/Forums/forefront/en-US/home?forum=Forefrontedgegeneral
Thanks
Best Regards
Jerry Guo
TechNet Community Support -
Pass Through Auth Not Using Novell eDirectory Over RDP - Virtual Desktop
Hi,
I have installed and configured SGD and the Virtual Desktop Adapter to a Virtual Center server. So far that whole side of things is working great. Machines are cloned, prepped and connected to by users through the My Desktop link in SGD. Now that I am attempting to perfect the master template I have encountered some issues. The network here is Novell eDirectory and at the moment when the desktop is launched the username and password used to authenticate to the SGD webtop are passed through to the Virtual Machine, but it seems that they are passed through to the Windows Authentication System/GINA even though the Novell client is in place.
The virtual machines are Windows XP and by default none of the user accounts exist locally, so of course the login fails. This drops the user back to the login box where it can be seen that the Workstation Only tick box is checked. Settings in the Novell client to always default to eDirectory authentication, forget last setting used etc has all been set properly. Even when hiding the Workstation Only tickbox the username and password are passed to local system authentication still.
I need to get the username and password sent to the Novell eDirectory authentication system/GINA in order for Zenworks to create the user on the local system. When dropping back to the login box and manually unticking the Workstation Only box login proceeds normally. Drives are mapped and the local user account is created by the Zenworks agent.
Is SGD specifically targeting an authentication subsystem within the virtual machine, regardless of your installed authentication handler/GINA preference order? Can I get SGD to pass the details to the Novell client? Barring that is there some way I can prevent SGD passing the details? I tried turning off some of the authentication details caching etc but some of that is needed to rename the virtual machines after the user connecting. For the time being having users authenticate twice would be acceptable, having them login in, then get an error message, then manually unticking Workstation Only then relogging in is not acceptable.
I have been searching these forums, Novell forums, Terminal Server forums for answers but so far nothing has been of any help. Please note that the login box is not the cut down/windows only login box that users are seen when they connect over RDP to a machine that already has a user logged in locally. There is no user logged in locally and the full login box is presented once the login failed message is cleared.
Any help, or even a nudge in the right direction would be great.
Thanks
RussHi,
Thanks for taking the time to respond. I tried the full context user name path as well, but its defiantly just being passed to a different GINA. The only credentials that determine if you have RDP access to a server is the local machines credentials, so Microsoft have the service pass authentication straight to the Microsoft GINA non-interactively instead of honouring the installed GINA's. So it will fail no matter what I put in since the account doesn't exist locally yet. People have implemented solutions that depend on Active Directory domains, but that's what I am trying to avoid.
In that situation the AD Domain would allow access to the local machine based on Windows permissions, and a registry setting TSAutoLogin or something would trigger the Novell log in in parallel to map the Netware shared volumes. With no domain you can't get the initial log in triggered for the Novell client to kick in.
Connecting to the virtual machine using an RDP client without pre-entering authentication information does show the Novell Login (NWGINA) with all the right settings in place, so I have modified the expect (login) script for SGD not to automatically pass log in information through with the RDP connection it makes. The result is a clean Novell login box without any errors that a user can just enter their details into a second time.
Russ -
Data has changed after passing through FIFO?
Dear experts,
I am currently working on a digital triangular shaping using the 7966R FPGA + 5734 AI. I am using LabView 2012 SP1.
Some days ago I have encountered a problem with my FIFOs that I have not been able to solve since. I'd be glad if somebody could point out a solution/ my error.
Short description:
I am writing U16 variables between ~32700-32800 to a U16 configured FIFO. The FIFO output does not coincide with the data I have been writing to the FIFO but is rather bit-shifted or something is added. This problem does not occure if I execute the VI on the dev. PC with simulated input.
What I have done so far:
I am reading all 4 channels of the 5734 inside a SCTL. The data is stored in 4 feedback nodes I am applying a triangular shaping to channel 0 and 1 by using 4 FIFOs that have been prefilled with a predefined number of zeros to serve as buffers. So it's something like (FB = Feedback node):
A I/O 1 --> FB --> FIFO 1 --> FB --> FIFO 2 --> FB --> Do something
A I/O 2 --> FB --> FIFO 3 --> FB --> FIFO 4 --> FB --> Do something
This code shows NO weird behaviour and works as expected.
The Problem:
To reduce the amount of FIFOs needed I then decided to interleave the data and to use only 2 FIFOs instead of 4. You can see the code in the attachment. As you can see I have not really changed anything to the code structure in general.
The input to the FIFO is a U16. All FIFOs are configured to store U16 data.
The data that I am writing to the FIFO can be seen in channel 0 of the output attachment.
The output after passing through the two FIFOs can be seen in channel 2 of the same picture.
The output after passing through the first FIFO (times 2) can be seen in channel 3 of the picture.
It looks like the output is bit-shifted and truncated as it enters Buffer 1. Yet the difference between the input and output is not exactly a factor of 2. I also considered the possibility that the FIFO adds both write operations (CH0 + CH1) but that also does not account for the value of the output.
The FIFOs are all operating normally, i.e. none throws a timeout. I also tried several different orders of reading/writing to the FIFOs and different ways of ensuring this order (i.e. case strucutres, flat and stacked sequence). The FIFOs are also large enough to store the amount of data buffered no matter if I write or read first.
Thank you very much,
Bjorn
Attachments:
FPGA-code.png 61 KB
FPGA-output.png 45 KBDuring the last couple of days I tried the following:
1. Running the FPGA code on the development PC with simulated I/O. The behavior was normal, i.e. like I've intended the code to perform.
2. I tested the code on the development PC with the square and sine wave generation VI as 'simulated' I/O. The code performed normal.
3. I replaced the FIFOs with queues and ran my logic on the dev. PC. The logic performed totally normal.
4. Right now the code is compiling with constants as inputs like you suggested...
I am currently trying to get LabView 2013 on the development machine. It seems like my last real hope is that the issue is a bug in the XILINX 13.4 compiler tools and that the 14.4 tools will just make it disappear...
Nevertheless I am still open for suggestions. Some additional info about my FIFOs of concerne:
Buffer 1 and 2:
- Type: Target Scoped
- Elements Requested: 1023
- Implementation: Block Memory
- Control Logic: Target Optimal
- Data Type: U16
- Arbitrate for Read: Never Arbitrate
- No. Elements Per Read: 1
- Arbitrate for Write: Never Arbitrate
- No. Elements Per Write: 1
The inputs from the NI 5734 are U16 so I am wirering the right data type to the FIFOs. I also don't have any coercion dots within my FPGA VI. And so far it has only occured after the VI has been compiled onto the FPGA. Could some of the FIFOs/block memory be corrupted because we have written stuff onto the FPGA too often? -
Cisco ASA 5505 L2TP Pass through
I am having trouble with L2TP pass through on an ASA 5505 device.
L2TP server: OSX 10.6
I can connect with any OSX system and it works fine straight away.
When connecting with a windows computer I get a 789 error. "Error 789: The L2TP connection attempt failed because the security layer encountere a processing error during the initial negotiations with the remote computer."
I did not setup or configure the device to start with and apart from this issue its working fine so I am hessitant at trying to just mess around too much to try and find the problem.
I am using the ASDM 6.4 to manage the device.
Ports look to be forwarded correctly; 1701, 4500 & 500 UDP.
Im just looking for other common issues?
RobBelow is the commands you wanted.
Where you see: IPNOTWHATIWASEXPECTING
This is an IP I dont know. possible and old IP address.
and
default-domain value domain-notcorrect.local
This is an old domain from years ago.
Result of the command: "show run crypto"
crypto ipsec transform-set aes-sha esp-aes esp-sha-hmac
crypto ipsec transform-set aes-192-sha esp-aes-192 esp-sha-hmac
crypto ipsec transform-set aes-256-sha esp-aes-256 esp-sha-hmac
crypto ipsec transform-set 3des-sha esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set transform-amzn esp-aes esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map map-dynamic 1 set pfs group5
crypto dynamic-map map-dynamic 1 set transform-set aes-256-sha aes-192-sha aes-sha 3des-sha
crypto dynamic-map map-dynamic 2 set pfs
crypto dynamic-map map-dynamic 2 set transform-set aes-256-sha aes-192-sha aes-sha 3des-sha
crypto dynamic-map map-dynamic 3 set pfs
crypto dynamic-map map-dynamic 3 set transform-set aes-256-sha aes-192-sha aes-sha 3des-sha
crypto dynamic-map map-dynamic 4 set transform-set aes-256-sha aes-192-sha aes-sha 3des-sha
crypto map outside_map 1 match address outside_1_cryptomap
crypto map outside_map 1 set peer IPNOTWHATIWASEXPECTING3
crypto map outside_map 1 set transform-set ESP-DES-SHA
crypto map outside_map 2 match address acl-amzn
crypto map outside_map 2 set pfs
crypto map outside_map 2 set peer IPNOTWHATIWASEXPECTING IPNOTWHATIWASEXPECTING
crypto map outside_map 2 set transform-set transform-amzn
crypto map outside_map 255 ipsec-isakmp dynamic map-dynamic
crypto map outside_map interface outside
crypto isakmp identity address
crypto isakmp enable outside
crypto isakmp policy 1
authentication pre-share
encryption aes-256
hash sha
group 5
lifetime 86400
crypto isakmp policy 2
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
crypto isakmp policy 3
authentication pre-share
encryption aes-256
hash sha
group 1
lifetime 86400
crypto isakmp policy 11
authentication pre-share
encryption aes-192
hash sha
group 5
lifetime 86400
crypto isakmp policy 12
authentication pre-share
encryption aes-192
hash sha
group 2
lifetime 86400
crypto isakmp policy 13
authentication pre-share
encryption aes-192
hash sha
group 1
lifetime 86400
crypto isakmp policy 21
authentication pre-share
encryption aes
hash sha
group 5
lifetime 86400
crypto isakmp policy 22
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
crypto isakmp policy 23
authentication pre-share
encryption aes
hash sha
group 1
lifetime 86400
crypto isakmp policy 31
authentication pre-share
encryption 3des
hash sha
group 5
lifetime 86400
crypto isakmp policy 32
authentication rsa-sig
encryption des
hash sha
group 1
lifetime 86400
crypto isakmp policy 33
authentication pre-share
encryption 3des
hash sha
group 1
lifetime 86400
crypto isakmp policy 34
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
Result of the command: "show run group-policy"
group-policy evertest internal
group-policy evertest attributes
dns-server value 10.100.25.252
vpn-idle-timeout 720
vpn-tunnel-protocol IPSec l2tp-ipsec
pfs enable
split-tunnel-policy tunnelspecified
split-tunnel-network-list value vpnsplittunnel
default-domain value domain-notcorrect.local
group-policy petero internal
group-policy petero attributes
dns-server value 10.100.25.252
vpn-idle-timeout 720
pfs enable
split-tunnel-policy tunnelspecified
split-tunnel-network-list value vpnsplittunnel
default-domain value domain-notcorrect.local
group-policy awsfilter internal
group-policy awsfilter attributes
vpn-filter value amzn-filter
group-policy vpnpptp internal
group-policy vpnpptp attributes
dns-server value 10.100.25.252
vpn-tunnel-protocol l2tp-ipsec
group-policy vanheelm internal
group-policy vanheelm attributes
dns-server value 10.100.25.252
vpn-idle-timeout 720
vpn-tunnel-protocol IPSec l2tp-ipsec
pfs enable
split-tunnel-policy tunnelspecified
split-tunnel-network-list value vpnsplittunnel
default-domain value domain-notcorrect.local
group-policy ciscoVPNuser internal
group-policy ciscoVPNuser attributes
dns-server value 10.100.25.10
vpn-idle-timeout 720
pfs enable
split-tunnel-policy tunnelspecified
split-tunnel-network-list value vpnsplittunnel
default-domain value domain-notcorrect.local
group-policy chauhanv2 internal
group-policy chauhanv2 attributes
dns-server value 10.100.25.252
vpn-idle-timeout 720
pfs enable
split-tunnel-policy tunnelspecified
split-tunnel-network-list value vpnsplittunnel
default-domain value domain-notcorrect.local
group-policy oterop internal
group-policy oterop attributes
dns-server value 10.100.25.252
vpn-idle-timeout 720
vpn-tunnel-protocol IPSec l2tp-ipsec
pfs enable
split-tunnel-policy tunnelspecified
split-tunnel-network-list value vpnsplittunnel
default-domain value domain-notcorrect.local
group-policy Oterop internal
group-policy Oterop attributes
dns-server value 10.100.25.252
vpn-idle-timeout 30
group-policy chauhanv internal
group-policy chauhanv attributes
dns-server value 10.100.25.252
vpn-idle-timeout 30
vpn-tunnel-protocol IPSec l2tp-ipsec
group-policy bnixon2 internal
group-policy bnixon2 attributes
dns-server value 10.100.25.252
vpn-idle-timeout 720
vpn-tunnel-protocol IPSec l2tp-ipsec
pfs enable
split-tunnel-policy tunnelspecified
split-tunnel-network-list value vpnsplittunnel
default-domain value domain-notcorrect.local
Result of the command: "show run tunnel-group"
tunnel-group ciscoVPNuser type remote-access
tunnel-group ciscoVPNuser general-attributes
address-pool vpnippool
default-group-policy ciscoVPNuser
tunnel-group ciscoVPNuser ipsec-attributes
pre-shared-key *****
tunnel-group petero type remote-access
tunnel-group petero general-attributes
address-pool vpnippool
default-group-policy petero
tunnel-group petero ipsec-attributes
pre-shared-key *****
tunnel-group oterop type remote-access
tunnel-group oterop general-attributes
address-pool vpnippool
default-group-policy oterop
tunnel-group oterop ipsec-attributes
pre-shared-key *****
tunnel-group vanheelm type remote-access
tunnel-group vanheelm general-attributes
address-pool vpnippool
default-group-policy vanheelm
tunnel-group vanheelm ipsec-attributes
pre-shared-key *****
tunnel-group chauhanv type remote-access
tunnel-group chauhanv general-attributes
default-group-policy chauhanv
tunnel-group Oterop type remote-access
tunnel-group Oterop general-attributes
default-group-policy Oterop
tunnel-group chauhanv2 type remote-access
tunnel-group chauhanv2 general-attributes
address-pool vpnippool
default-group-policy chauhanv2
tunnel-group chauhanv2 ipsec-attributes
pre-shared-key *****
tunnel-group bnixon2 type remote-access
tunnel-group bnixon2 general-attributes
address-pool vpnippool
default-group-policy bnixon2
tunnel-group bnixon2 ipsec-attributes
pre-shared-key *****
tunnel-group vpnpptp type remote-access
tunnel-group vpnpptp general-attributes
address-pool vpnippool
default-group-policy vpnpptp
tunnel-group IPNOTWHATIWASEXPECTING4 type ipsec-l2l
tunnel-group IPNOTWHATIWASEXPECTING4 ipsec-attributes
pre-shared-key *****
tunnel-group evertest type remote-access
tunnel-group evertest general-attributes
address-pool vpnippool
default-group-policy evertest
tunnel-group evertest ipsec-attributes
pre-shared-key *****
tunnel-group evertest ppp-attributes
authentication ms-chap-v2
tunnel-group IPNOTWHATIWASEXPECTING3 type ipsec-l2l
tunnel-group IPNOTWHATIWASEXPECTING3 ipsec-attributes
pre-shared-key *****
tunnel-group IPNOTWHATIWASEXPECTING2 type ipsec-l2l
tunnel-group IPNOTWHATIWASEXPECTING2 general-attributes
default-group-policy awsfilter
tunnel-group IPNOTWHATIWASEXPECTING2 ipsec-attributes
pre-shared-key *****
isakmp keepalive threshold 10 retry 3
tunnel-group IPNOTWHATIWASEXPECTING type ipsec-l2l
tunnel-group IPNOTWHATIWASEXPECTING general-attributes
default-group-policy awsfilter
tunnel-group IPNOTWHATIWASEXPECTING ipsec-attributes
pre-shared-key *****
isakmp keepalive threshold 10 retry 3
Result of the command: "show vpn-sessiondb detail remote filter protocol L2TPOverIPsec"
INFO: There are presently no active sessions of the type specified
Result of the command: "show vpn-sessiondb detail remote filter protocol L2TPOverIPsecOverNAT"
INFO: There are presently no active sessions of the type specified -
Unable to open login page through internet explorer
Hi,
Configured Reverse proxy external tier. We are able to access login page through Mozilla but unable to access through IE8.
Raised SR, but they have reverted saying it's browser problem & not in their scope.
Please help for the following error message when redirecting to login page.
You are trying to access a page that is no longer active.
- The referring page may have come from a previous session. Please select Home to proceed.
Thanks in advancePlease post the details of the application release, database version and OS.
Configured Reverse proxy external tier. We are able to access login page through Mozilla but unable to access through IE8.
Raised SR, but they have reverted saying it's browser problem & not in their scope.Do you meet the requirements in these docs?
Recommended Browsers for Oracle E-Business Suite Release 12 [ID 389422.1]
Recommended Browsers for Oracle E-Business Suite 11i [ID 285218.1]
Please help for the following error message when redirecting to login page.Can you find any errors in the application/apache/database log files?
You are trying to access a page that is no longer active.
- The referring page may have come from a previous session. Please select Home to proceed. Please see if these docs help.
Session Error Raised Direct After Login when Using Two-Letter Domain Segments [ID 420573.1]
Login Issue via Internet Explorer after EBS Upgrade from 11.5.10.2 to 12.0.4 [ID 828534.1]
R12 Login Fails When A Cookie Using Comma Separated Values Is Set First [ID 946807.1]
R12: Error "You are trying to access a page that is no longer active" When Attempting to Access Through Internet Explorer [ID 968839.1]
Thanks,
Hussein -
How can I have each pass through a for loop communicate with a new indicator?
Hello,
I am using 16 color boxes to indicate how 16 channels are behaving. If a color box is blue, its respective channel is running correctly, red means it has failed etc. I am continuously checking each channel using a loop, and I wanted to update the channel colors every loop. I have made an array of 16 numbers corresponding to the color I wish to have (which are blue = running, red = failed, green = completed, black = not in use). However, I cannot find a way to pull these 16 numbers out of the array and to the color boxes short of 16 index arrays connected to the color boxes.
I understand how to convert each individual number to a color, I just don't know how to use a 16 times for loop to communicate with a different color box each pass through. Is there any way to do this or should I just go for brute force?
Thank you.
Solved!
Go to Solution.Sorry I keep making new posts. Attached is an example i wrote up. There are three cases in the disabled structure, each has a different implementation of what i belive your specs are.
Tim Elsey
LabVIEW 2010, 2012
Certified LabVIEW Architect
Attachments:
update color box.vi 24 KB -
New events in iCal are entered on my iMac. These events pass through correctly to my other computers and iPhone. However, each new event shows up twice on my iPads. The clutter is distracting. Anyone have suggestion as to correcting this annoyance?
New events in iCal are entered on my iMac. These events pass through correctly to my other computers and iPhone. However, each new event shows up twice on my iPads. The clutter is distracting. Anyone have suggestion as to correcting this annoyance?
-
USB Pass-Through From Windows 8.1 Host To Windows Server 2012 R2 VM
I want to be able to connect with a Windows Mobile Device through Windows Mobile Device Center, within a Virtual Machine. When connecting through the Hyper-V Manager and through Remote Desktop, under "Other supported RemoteFX USB devices",
I can see the Symbol USB Sync Cradle. In the VM, in Device Manager, I don't see a USB connection. In the VM, I don't see any meaningful errors in the Event Viewer.
Host: Windows 8.1 Enterprise Hyper-V on a Domain. Upgraded from Windows 8.1 Pro. When this computer was originally installed with Windows 8 Pro, Hyper-V was enabled. I removed Hyper-V, and installed VMWare Player, because I wanted
USB Pass-through. I then uninstalled VMWare and installed VirtualBox. Recently, I uninstalled VirtualBox, upgraded to Windows 8.1 Enterprise, and enabled Hyper-V.
Virtual Machine OS: Windows Server 2012 R2 on a Workgroup. Started out with being a VMWare VM, using VMWare Player. Moved to VirtualBox. USB Pass-through was working in both those virtual environments. Used Disk2VHD to convert the
VM to a VHDX file.
On the Host:
Windows Mobile Device Center is connected to a Motorola Windows Mobile Device (MC959X) sitting in a Symbol USB Cradle. The OS on the scanner is Windows Embedded Handheld 6.5 Classic CE OS 5.2.29217 (Build 29217.5.3.12.26). Advanced Networking
(USB to PC) is not enabled.
Enabled RemoteFX.
In the RDP file, and in the Registry, added the GUID's for:
WPD "{eec5ad98-8080-425f-922a-dabf3de3f69a}";
Windows Mobile "{6AC27878-A6FA-4155-BA85-F98F491D4F33}";
USB Device "{88BAE032-5A81-49f0-BC3D-A4FF138216D6}";
Windows CE USB Device "{25dbce51-6c8f-4a72-8a6d-b54c2b4fc835}";
GUID_DEVINTERFACE_USB_DEVICE "{A5DCBF10-6530-11D2-901F-00C04FB951ED}"
Ran "sfc /scannow"
All Microsoft Updates are current.
What am I missing?I hope it's something like that. Those features have been installed. Here's what PowerShell shows is installed:
PS C:\Windows\system32> Get-WindowsFeature |Where {$_.Installed -eq "True"} | ft DisplayName, Installed
DisplayName
Installed
File and Storage Services
True
File and iSCSI Services
True
File Server
True
Storage Services
True
Remote Desktop Services
True
Remote Desktop Licensing
True
Remote Desktop Session Host
True
Web Server (IIS)
True
Web Server
True
Common HTTP Features
True
Default Document
True
Directory Browsing
True
HTTP Errors
True
Static Content
True
HTTP Redirection
True
Health and Diagnostics
True
HTTP Logging
True
Performance
True
Static Content Compression
True
Security
True
Request Filtering
True
Windows Authentication
True
Application Development
True
.NET Extensibility 3.5
True
.NET Extensibility 4.5
True
ASP.NET 3.5
True
ASP.NET 4.5
True
ISAPI Extensions
True
ISAPI Filters
True
Management Tools
True
IIS Management Console
True
.NET Framework 3.5 Features
True
.NET Framework 3.5 (includes .NET 2.0 and 3.0)
True
.NET Framework 4.5 Features
True
.NET Framework 4.5
True
ASP.NET 4.5
True
WCF Services
True
TCP Port Sharing
True
Ink and Handwriting Services
True
Media Foundation
True
Remote Server Administration Tools
True
Role Administration Tools
True
Remote Desktop Services Tools
True
Remote Desktop Licensing Diagnoser Tools
True
Remote Desktop Licensing Tools
True
SMB 1.0/CIFS File Sharing Support
True
User Interfaces and Infrastructure
True
Graphical Management Tools and Infrastructure
True
Desktop Experience
True
Server Graphical Shell
True
Windows PowerShell
True
Windows PowerShell 4.0
True
Windows PowerShell 2.0 Engine
True
Windows PowerShell ISE
True
WoW64 Support
True -
Static NAT pass-through; can not get to work
I am not having any luck getting a static NAT pass-through to work.
BM3.8/NW6.5 all patched to the latest patches (no betas). IPFLT is NOT
loaded.
My internal network on one LAN all have 10.100.xxx.xxx private addresses.
Dynamic NAT works great.
I have secondary public IP addresses bound to my public NIC. Static NAT
mapping between the secondary public IP addresses and the couple of
individual private addresses work just fine. In other words, all has been
working fine.
I need to give one of those internal resources its public IP address
(change it's private to its public).
OK, I went into the NAT table and changed the proper public <-> private to
public <-> public (identical addresses). I changed the internal computer
to it's public address/mask with the same default gateway the server is
using. The internal computer can now only ping itself; can't even ping
it's default gateway. I did reinitialize, and also restarted. I can not
get the pass-through connection to work.
Any thoughts will be well received.
BobRobert,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/
Maybe you are looking for
-
How to remove connect and workbook link after pressing Save as,Print,Export
I have to remove the connect link and workbook link which appear AFTER pressing Save as,Printable Page,Export in a discoverer viewer report. I had already removed the link in the report itself with changing the uix files, but after pushing the link f
-
Problem in connecting to WPSM54G
Why do I have to run the "Print Server Utility" each time I start my Windows XP compter to hook up to the WPSM54G wireless print server? I have a wireless connection between my note pad computer and the WRT54G wireless router that works fine.
-
MacBook Pro mid2007 connecting to monitor
Hi there. I am currently am using a MacBook Pro mid 2007 and was wondering it is possible to connect it to an external monitor and if so use it when closed without the comp going into sleep mode. Cheers. Andy
-
Indirect role assignment- PO Release strategy roles
Hello, I am in the midst of creating PO release strategy roles for implementation and trying to figure out if indirect role assignment / position based assignment would be a good idea for these roles. The reason- there are 35 release codes.
-
I bought a TV show from the iTunes store and want to sync it/put it onto my iPod Nano (5th Generation). When I connect the device to my computer and go to Library > iPod (right hand corner) > TV Shows, the show I want to get onto my iPod is there, bu