MCE remote with Vista Ultimate T60

Hello there. new to this community and want to see if it can help with this question.
At the moment im tryin to get my IR reciver on the t60 laptop to work with media center in vista ultimate. I have my mce remote that i used with my xp mce pc. it is an HP MCE remote.
no longer have the pc. just a laptop.
and well i want to use hte remote with Media center in vista when feeling lazy.
I have tried to make it detect and it wont communicate. the IR is enabled and works with my old PDA and the remote works on my roomies HP laptop.
Any ideas? random thoughts???
Thanks 

Hi
Did you reinstall the Remote Control Manager? This utility improves the support for a remote control on your computer.
How about Value Added Package? There is a new version available. Try to update this too.
But back to the basics the Qosmio F30-131 belongs to the PQF30E series. Did you choose the drivers for this series?
However, this notebook was delivered and preinstalled with Win MCE. Possible this remote control works only with XP version of Windows Media Center.

Similar Messages

  • Flash in Firefox with Vista Ultimate Works a while then stops working until restart

    I recently got a new computer with Vista Ultimate. I
    downloaded all the patches and installed the latest versions of
    Firefox (2.0.0.4) & Flash Player (9.0.45.0). I have the
    following add-ons loaded in Firefox: Firebug 1.05, Greasemonkey
    0.7.20070607.0), Tab Mix Plus (0.3.6), Talkback (2.0.0.4), DOM
    Inspector (1.8.1.4). This is the process that happens.
    1) Connect to the computer in questoin using RDP
    2) Launch Firefox and go to a site like Youtube or MySpace.
    It works great. Everything plays that I click on.
    3) Disconnect from RDP and reconnect.
    4) The Flash plays never work again. They will typically
    start a show for 2-10 seconds and then just "halt". This is every
    movie I view off of either YouTube or MySpace. Even if I close the
    Myspace & YouTube tabs and open them in a new clean tab.
    If I close Firefox and reopen it everything starts working
    again. Again this appears to work until I disconnect from RDP
    again.
    What is going wrong here? What can I do to fix this or upload
    data dumps so this can get fixed?

    hallo
    I have a photosmart C148x. It stops while printering. In the mean time on the display of the machine it says printing.....

  • W500: using the switchable graphics with vista ultimate without the power manager software?

    seriously, invest in a new hitachi travelstar 320gb for 49 bucks from that tiger place online and a usb hard drive caddy, pop in your free clonezilla cd and your rescue and recovery problems will be over!
    after reading all the problems with that software i figured my data was too valuble to get caught in that mess so for under 75 bucks problem solved and i rid my w500 of that bloatware. even cheaper then ordering the recovery disks from lenovo.
    working on getting rid of the rest of the useless software now.
    hey question, how do you use the switchable graphics on the w500 with vista ultimate without the power manager software? if you can thats next!!
    Moderator note: Question added to subject line for clarity.
    Message Edited by Agotthelf on 28-04-2009 08:45 AM

    That's because you are asking a T500/W500 question in the Thinkvantage forum. Anyway, the answer to your question is in this thread.
    ATI recently started packaging their switchable graphics driver together with their regular Catalyst. So downloading their latest driver Catalyst 9.4 from the ATI/AMD site and then modifying it with the Mobility Modder will allow you to use switchable graphics without the power manager. The little problem is just that the released version of the Mobility Modder stopped working with Catalyst 9.2 and you are on your own getting a modified Modder  working on 9.4, see here.
    So I decided not to make more work for myself staying on a modded Catalyst 9.1 and for the time being living without switchable graphics.
    T500: Vista 32, 2.8GHz, 4GB RAM, 15.4" 1680x1050, 500GB 7200rpm, ATI Radeon HD3650 + Intel 4500MHD. T42: XP, 1.7GHz, 2GB RAM, 14.1" 1024x768, 250GB PATA, ATI Radeon 7500.

  • T61 with Vista Ultimate WON'T replicate CD/DVD like R61 with XP Professional - - - HOW DO I DO THIS?

    Tried to copy a CD on new T61 with Vista Ultimate preloaded.  Did this with no problems on an R61 with XP Professional.  The HELP files say to copy all data to a directory and then copy them to a blank CD.  This is NOT what I want or need.  It also mentions that OTHER software to do this may be obtainable.  I KNOW that Lenove uses ROXIO in its CMD line interface as a brand new system gave me the BSOD when inserting a video DVD and Windows Media Player coughed and died.  Took about 3 hours to return to factory settings on a machine I had just customized.  Is this another "feature" from Microsoft or what?  Can you load ROXIO or other  software to DUPLICATE CDs and DVDs.  Have the dual layed DVD/CD RW slim ultrabay drive.  Who makes this drive anyway?

    HL = Hitachi LG and Panasonic are the two that i know of.

  • Acrobat 9 Pro not compatible with Vista Ultimate

    I am running Vista Ultimate and have Acrobat 9 Pro. When I print and choose "Adobe PDF Converter" as my printer I get the following error:
    Interactive services dialog detection
    Program(s) of devices(s) requesting attention.
    Message title: Test Page.pdf Adobe Acrobat Pro
    Program path: C:\Program Files\Adobe\Acrobat9.0\Acrobat\Acrobat.dll
    Received: November 15 -08, 9:23:58 PM
    This problem happens because of partial incompatibility with Windows Vista. Please contact the program of device manufacturer(s) for more information.
    Once I acknowledge this the new .pdf file appears.
    Do I have a setting wrong?
    Thanks

    I am having the same problem in Windows 7, did Adobe ever come up with a solution.
    We recently upgraded our systems to Windows 7.  Since the upgrade, the 'interactive services detection' dialog box opens every time I create a PDF file (I am using Adobe Acrobat 9 Pro).  Is there any way to correct this?  Acrobat used to open when the file was created (WinXP), now I get the 'isd' box.  It creates the file, but the dialog box comes up asking me to view the message.  It takes me away from my desktop to view the file (goes to black screen and then displays the file) and I have to close the file in order to get back to my desktop (black screen then back to desktop).  I was able to disable it by going into printer preferences and unchecking 'view adobe pdf results', but I would really like to be able to view my PDF's when they are created.   (We had Adobe Acrobat Reader X installed initially on the system and then installed the full version of Adobe Acrobat Pro 9, using AAP9 as the default program for pdf's.  I don't remember if this problem has been occurring since we installed the full version or after Reader X was uninstalled (program was acting funny, so we uninstalled.)  Any suggestions are appreciated.

  • Imac 24 3.06 file sharing with a pc with vista ultimate

    I can not see my shared files on my Imac since loading vista ultimate before when I had Xp it worked ok. I am pretty sure the problem is with the pc side. Please help

    I would not disable it if I did not have other firewall software installed. I use Norton on my XP box and you can set Norton Firewall to allow certain machines only for certain purposes...a more granular setup. I don't have a Vista box here so I can't say how configurable the firewall is on Vista. I have one at my office and if I find the time, I will play around with it and see if I can come up with something.

  • Macbook with vista ultimate virtual machine

    I have checked the forums of the virtual machine I have called Virtualbox. I installed Vista Ultimate on my macbook and am liking it so far but i cannot seem to get the internet to work. When i look in my preferences pane in Virtualbox it tells me to choose between "none" or Nat. I choose NAT but i still cannot connect. please if anyone has any answers as to where i can get a driver for vista for my wireless card in my late 2007 Macbook.

    I'm running a late '07 MB with Parallels and Vista Home Premium. To be truthful, I don't load Vista very often. However, from the get-go, my internet connections worked immediately after I installed Vista with the default setup.
    I'm not familiar with Virtualbox. I just googled it and it appears to be a new program with perhaps not the support you need.
    Have you given any thought to trying BookCamp? I don't know if that would require another installation of Vista or not. I'm guessing it probably would.

  • Will any Creative MP3/Video Players Work With Vista Ultimate/Yahoo Music Out of the B

    i've had a heck of a time getting my zen touch to work with my new vista ultimate dell pc, almost ready to give up. why i'm even thinking of getting another creative device given the above i'm not sure, but if i was, do any of the current devices (20gb or greater, mostly for music but want video capabilities) work with vista and yahoo music correctly and without a huge amount of heartache? and if not, any other devices i should look at? i really like the yahoo music service so don't want to go the apple route. thx!

    iTunes is only intended for iPods and iPhones. In recent releases, Apple has instituted changes that prevent it from being used with other devices, e.g. release 8.2.1 deliberately broke the ability to sync with the Palm Pre.
    Since you will be using multiple platforms, make sure that all music that your rip or purchase is in MP3 format. Then your music can be used in iTunes, Creative, or any other player or program, without conversion or compatibility problems.
    Per the problem with Zen and Vista, you may wish to try the question on a Zen discussion.

  • Cannot get iPod touch going with Vista Ultimate

    iTunes gives me a message that the iPhone only works with 32 bit versions of XP or Vista. I have Vista Ultimate on my laptop, which is 32 bit.
    Does anyone have any suggestions. I cannot get this thing going....

    Well what does the system panel say under the control panel? Should tell you on label "System Type"
    64-Bit is not supported. Not sure why since iTunes knows the iPod is there. iTunes thinks its a iPhone instead though.

  • Thinkpad comes with Vista Ultimate, need downgrade to xp

    Hi guys, 
    just purchased a thinkpad tablet pc with preinstalled vista ultimate and wanna downgrade to xp. where can i get the xp install cds? 
    im in germany.
    and is it possible i get the vista ultimate recovery cd from lenovo 'cause the recovery is only on the  hard disk.
    thx in advance.

    You have to burn yourself a set of recovery media using an external dvd burner. Downgrade wise, you will have to call Lenovo and see whether you are still eligible for a downgrade, which you must pay a service and handling charge.
    But if you are using tablet, i suggest you stay with Vista, as the XP tablet edition is not that great.  
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Shortcut [ALT]+[SHIFT]+[P] doesnt work with Vista ultimate??!

    hello
    when i try to create a new position key frame in the time line, i always used the shortcut [ALT]+[SHIFT]+[P]. on other versions before Vista it was working perfectly.
    on the Vista ultimate though, instead of creating a key frame, i get the windows "mediaplayer" loading up, every time i use this shortcut.
    i looked for this shortcut to change within media player, but couldn't find it.
    is there a way to change the shortcut inside after effects?
    i am using after effect CS3.
    all other shortcuts (like [ALT]+[SHIFT]+[J] or [ALT]+[SHIFT]+[S]) are working fine...
    thank you
    R Sting

    Go to the start/Windows button, click and in the search box type "Windows Media Player." DON'T select the icon (thereby opening the application).
    INSTEAD, right click the icon for the media player and choose "Properties." You will see a box for shortcut...just delete the one that's there and it will now show as "None."

  • AUDIGY 2 ZS doesnt works with vista ultimate

    The problem is, when i try to install the drivers SBAX_PCDVTBETA_US_2_2_000, this message below appear to me:?"Setup is unable to detect a supported product on your system.Please ensure that your product is properly installed beforerunning this Setup program.Setup will exit."?The point is before this, Vista tries to find the driver to my Audigy 2 ZS without any success... So, any body knows some solution for this?ThanksByron

    I have the same problem with Vista home premium. I've tried every driver possibilities, I reinstalled the original disks and then the Vista beta drivers and my card still isn't being recognized. My computer can play sound but all of the advanced features of my sound card are unavailable.

  • MOVED: Media Live : Problem with graphics card with vista Ultimate

    This topic has been moved to Vista problems.
    https://forum-en.msi.com/index.php?topic=112530.0

    Thank you for replying. I had no idea I had a response. It is a Windows 7 Home Premium. The game is actually now a few different ones for my child, Baby Luv, Brave & Disney Princesses. None of them will work. I have an Intel Graphics Media Accelerator 3150 graphics card in this (Compaq Presario All-In-One Desktop PC) and I just posted another question in the forum about wanting to know if I can replace the grahics card with a HD card and if so how? I have looked online but can't find an answer. Is it possible to replace the card or with it being an all-in-one is it not possible? Thank you.

  • Re: Can't run P0056v200.exe (BIOS Update) on Tecra S5 with Vista Ultimate

    When I run the bios update utility P0056v200.exe from within Windows I get the message "Toshiba BIOS Package Ver.3.2.8: This Computer is not supported."
    I could not find any "traditional" update procedure for the Tecra S5.
    Does anybody have any idea how I could update my bios?
    TIA
    nuwera

    Hi,
    the problem is that there are no drivers available for Windows Vista 64Bit. Usually you must have all tools and utilities installed like the "common modules" or "HW setup" because these tools enable you to perform such windows based updates like the "P0056v200.exe".
    In your case there are not many options. You need a 32bit OS like WinXP or Windows Vista 32Bit which is supported from Toshiba by drivers and update your BIOS with a 32Bit based OS.
    The error comes by the way when no common modules are installed.
    Greets

  • PDF Printer not working with Acrobat 8 & Vista Ultimate 64bit

    I have not been able to print pdf's.  I am uptodate on upgrades and have installed, reinstalled printers and repaired the program etc.
    When I install an adobe printer I get the Adobe PDF Converter.  When I try to print with it, I get an audible failure signal and nothing ever happens.  Sometmes I get a sceen indicating it has failed, sometimes not.  I have had this problem since upgrading to a new computer with Vista Ultimate 64bit OS.
    I have seen various "Fixes" but none seem to address my problem or work for it.
    Anyone with the same problem and perhaps a solution?

    What version of AA8?

Maybe you are looking for

  • Oracle database 12c on Windows Server 2012

    Hello, Is it Oracle database 12c compatible with Windows Server 2012. What are the system requirements needed for Windows server 2012 on Oracle database 12c? Thanks Voitto

  • Create Credit memo with reference to billing in VF01

    Hi all: I want to create a credit memo with direct reference to the original billing. Thus the creation of CMR is not required. This is the new feature as of release 4.5a. In SAP system, I've done the configuration for copying control from billing do

  • Create a new bookmark under an existing bookmark in the tree

    I have a script to search through a time sheet report for the pages without the string "Employee Signature" and to then create new bookmarks under the existing bookmarks in the tree. So far the script will execute the book marks for the pages in the

  • How to extend the validity of already limited organization structure

    Dear experts, I have limited a purchasing group in the organization structure to a date in the past. The purchasing group is no longer appearing in the organization structure. Now, how I can extend the validity of the organization structure to a futu

  • Customize multiple Y scales in one wave graph

    Hi,   I am trying to show two channels in the same waveform graph but with seperate Y scales. And I want to customize the two Y scales independently using property nodes. But I found under the waveform graph property node there is only one Y scale.