MCHB,MARD - Stock available at plant level and storage location level

Hi ,
How to determine how much stock available at Storage location level and Plant level. (Lot is not maintained).
In MCHB-Stock at lot level is shown.
In MARD-Stock at Storage Location level is shown lncluding
the stock maintaned at the lot level.
If i want to know the stock which is not maintained in Lot, i.e, Stocks directly maintained at Storage location / Plant.
Do I need to subtract the MCHB Value from MARD Value ?
Is there any other way available to find the stocks which is not maintained at lot level.
Regards
Prasath

Hi prashant,
What do u mean by stock maintained at SL level without batch level.  Do u mean that some materials are subjected to batch management and some or not?
If that is the case, for all batch managed materials, u can see the stock at batch level and also same is summed up at SL level.  But still what ever u are getting from MARD table isstock at SL level only.
If u have activated batch management for any material, it will always be shown at lot level also.
hope this clarfifies query
award points if found useful

Similar Messages

  • Stock report in BW (valuated stock and Storage Location level)

    Dear All,
                Regards.We got an situation here,
    Case 1:  R3 (MB5B) (Both "Storage loc" and "Valuated stock" shows the same Stock Qty)
    1).The BW Stock Report shows values the Correct Values for "Receipt Qty" and "Issue Qty" with the Correct  "Quantity total Stock" aswell.
    Case 2 :   R3 (MB5B) (Stock is different between "Storage Loc" and "Valuated Stock")
    1).The BW Stock Report shows the  "Quantity Total Stock according to VALUATED STOCK Level(MB5B),but  the "Receipt Qty" and "Issue Qty" according to STORAGE LOCATION Level(MB5B) .
    We followed the "How to Handle Inventory "Doc with the proper sequence of Loading of Infosources and Compression.The data is sitting fine at the cube level.
    It would be great if someone can throw some Light on this issue,on how the Query shows a COMBO of both Valuated stock and Storage Location stock....Held up with this issue for quite sometime..Had a look at the   Oss Note (589024)...........
    Manythanks
    Arun

    HI,
    In Inventory we have two quantity fields given to satisfy the requirement.
    Valuated stock Qty - 0VALSTCKQTY
    Storage Location qty - 0TOTALSTCK
    You can make use of them based on your requirement. Hope this helps for you.
    Thanks,
    Arun

  • Reg : client level data,plant level data,storage location level data

    hi
    when we enter the data mm01 we select views.these views are based on cleint level,plant level,storage location level .i want the difference between all the three levels.how do we differentiate.

    As per our business process there are one company and in which many plants and storage location are available. In which many materials are available in different plant in different storage location.
    As per SAP Standard structure: -
    Company >> Company code1 & Company code2... >> Plant 1 & Plant 2 & Plant 3 .... >> Storage location 1 & 2 & 3........
    And in all plant and storage location have different data.
    Suppose in one plant we do quality testing for material and it may be possible in other plant we not perform quality testing for material. So in this case for same material quality data is different for different plants.
    Client Level: - Means data is same for all plant level like Basic data
    Plant Level: - Means data is based on plant level like Purchasing, Plant data, Quality data, Accounting view.
    Storage location level: - Means data is based on storage location level, for different storage location data will be different like Storage location stock data ..
    Due to this you can maintain different data on plant level & storage location level.
    Regards,
    Mahesh Wagh

  • Can PIR created at wbs element and MRP area of storage location level

    Hi,
    I tried to create an planned independent requirement at MRP area and WBS element level, but failed. The MRP area is not plant level, but storage location level.
    *When trying to create account assignment category Q for it, then there is an error message saying:*
    **only stock requirements are allowed when planning at MRP area level.**
    Does it mean it is not possible to create planned independent requirement for this case?
    Thanks!

    Select the "Issue storage location" as '2' here:
    spro -> production -> material requirement planning -> mrp groups -> overall maintenance of mrp groups -> overview -> mrp control parameters at material level -> (field) Issue storage location selection
    & make sure:
    1. In the BOM  issue storage location is blank for the components
    2. For the FG products , in mrp area prod.storage loc is maintained
    3. Components are extended to the mrp area.
    Pl. revert with the results

  • Material deletion at plant and storage location deletion at plant

    hI EXPERT,
    We are going to extend the materials in plant A to plant B and C. So we will extend it using LSMW. After extending, we need to delete the materials in plant A and storage location in plant A. How can we do that? Please explain step by step.
    Thanks

    Hi,
    If you want to delete material at storage location level
    Enter MM17
    Select table MARD
    Select fields tab
    find MARD-LVORM
    Execute (F8)
    Enter list of materials
    Enter plant
    enter storage location.
    tick the field lvorm(carry out mass change)

  • Availability check box at schedule line level and requirement class level

    Hi All
    What is the significance of availability check field at schedule line level and requirement type level.
    If I remove the check box at schedule line level, then there won't be any availability check carried out in the sales order, even though in requirement class it is checked. Is it for doing availability once the requirement is passed to MRP...
    In make to stock scenario, no availability check is active at schedule line level.
    scenario 1. stock is 0 in plant, when i place an order for 10 quantity, does system give any confirmed quantity on so and so date...or the confirmed quantity will be zero or as there is no availability check carried out, it confirms 10 quantity on customer requested delivery date and the time of creation of delivery, it gives an error message stating zero quantity is available. which one is correct in all the above.
    In make to order scenario, no availability check is active at schedule line level.
    order was created for 10 qty, as there is no availability check active, does the system give some date based on the lead times maintained in the material master or not?
    Regards
    Sree

    Hi sreekar
    The significance of availability check at schedule line level  is to determine weather availability check and TOR should be carried out for sales orders  or not. 
    If you remove check box at schedule line level , availability check and TOR wont be  carried out at sales order level.
    Coming to the scenario you said , make to stock , i think the availability check you are using is 01 make it 02. which is planned requirements. and stratergy group as 10. in MRP3 view in MMR. .
    as the availability check u have put 01 & stratergy group as 10 availability check doesnt carry
    coming to the scenario 2  , if the stock is 0 in plant and if you create a sales order, then the confirmed quantity should be 0 and that particular order will go to backorder processing.
    sometimes it  confirms the ordered quantity as the  confirmed qunatity, and it gives a confiremed delivery date on which the stock is confirmed , but that date is a tentative date.
    all these unconfirmed orders will go to backorders. once the qunatity is confirmed automatically , delivery date also will be done
    Coming to scenario 3 , when you create MTO order there will be availability check checked at the schedule line level. can you tell wat is the schedule line you are getting is it CP or ND?
    for schedule lines , ND - no availability check will be there , PD - availability check will be there
    Note: plz check 1st the availability check you have entered in MMR , if it  is 01 make it as 02. and then run these cycles.
    Reward points if useful and if Any queries let me know
    Regards
    Srinath
    Edited by: sri nath on Mar 21, 2008 7:53 PM

  • Opening and closing stock at storage location level

    Dear all
    I need a std report which will give the opening and closing stock at storage location level, Or should I go for dev. if yes please guide me.
    Regards
    Samuel

    Hi,
    check if you can use S_P00_07000139 report, select "Display stock movement by plant (with amount) and further select Sloc from layout.
    Regards,
    Vikas

  • SIT Value and Stock value at storage location level

    HI
    Can anyone tell me how to get the following:
    1. The value of the Stock in Transit on monthly basis
    2. The value of the stock at storage location level. The Stock value is correct at      plant level
    Thanks in advance.
    Soumen

    Hello,
    (1) please have a look into the Howto Guide:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/92c0aa90-0201-0010-17b1-bf5b11c71257
    (2) Please have a look into the note:
    589024
    And consider to use the feature Constant selection.
    http://help.sap.com/saphelp_nw04s/helpdata/en/d2/02223c5f00612be10000000a11402f/content.htm
    I hope this helps, Michael

  • Opening and closing Stock report at Storage location level- date wise

    Dear all
    Is there any standard report to view opening and closing stock at storage location level? ( we have MB5B which resets the entry screen if we enter SLOC details).
    Thanks
    Sam

    Do  I have the option of  selecting Storage Location wise opening and closing stock on a particular date or period, that is what I have requested? Is it possible, evenafter selecting storageloc/batch stock and entering all the SLOCs in the selection creen, the report output does not contain any SLOC, and using ctrl+F8 or display variant does not have SLOC as a field also.
    pls gudie
    sam

  • Plant and Storage Location determination at Item level during Copy control

    Hello Freinds,
    We are experiencing issues within Sales Order creation when the line item is referencing a contract. The plant and storage location is being determined from the contract - this should not be done, we have an enhancement in place for sales order plant/storage location determination which is how these values should be determined.
    Kindly suggest, if it can be achieved through configuration setting at Copy control level, to avoid the Plant and Storage location determination from Contract in to Sales Order.
    Thanks,
    Anup Bansal

    Hello
    You can mention the additional logic of redetermining Plant and storage location whenever copied from contract.
    In a sale order, i think you are maintaining a enhancement in prog MV45AFZB & user exit userexit_source_determination.
    YOu can maintain the coding at same place.
    thank you
    Anirudh

  • Report on QI, Blocked, Returned Stocks at Plant & Storage location level

    Hi,
    Would like to know any reports which gives QI, Blocked, Returned stocks at Plant & Storage location level.
    Regards,
    Vengat

    hi,
    What do you exactly mean say by "Returned  stock"..
    Also go through by MMBE tcode ...
    Regards
    Priyanka.P

  • Valuation at plant level and company code level

    Hi,
    Can someone explain me the difference between the valuation at plant level and company code level with a real world example?
    Regards,
    Malsha Kalubowila

    Hi,
    Inventory can be valuated at two levels either at company code level or at plant level. If you select valuation at company code level, all materials across all the plants will have same material price since valuation is at only company code level.
    Say for example Company code 1000 is buying a material which unit price is Rs. 10 from a vendor who supplies to two different plant A & B of company code 1000.  Assume Plant A is situated near vendor premises itself (so freight cost is Re 1 extra)  whereas plant B is situated at far away from vendor place (so freight cost rs 2 extra) and both cases freight cost is borne by the company and not by vendor.
    Assuming you have selected valuation at plant level, now in plant A same material will be valauted at Rs. 11 (10 +1) whereas at plant B it is valuated at Rs. 12 (10+2).
    Whereas if you have selected valuation at company code level, price will not be valuated at plant level rather at company code level which will get updated at moving average price in this case.
    So it is always best practice to select valuation at plant level rather than at company code level.
    Reg
    Karthikeyan G

  • Regarding how  enable plant stock and storage location  view

    hi all:
       Could you please tell me how enable plant stock and storage location  view for MM01?
       couldn't be better if there are detailed steps .
       Thank you very much!

    Hi,
    The views depend to material type. So you need update in the material type attributes.
    SPRO - Logistic General - Material Master - Basic Settings - Material Types - Define Attributes of Material Types
    Double click on the material type and update the views in 'User Departments'.
    Thanks.

  • Opening and closing balance values at storage location level

    Dear all,
    I want to know opening and closing balance values and receipts and issue values at storage location level for certain period.
    I tried with MB5B, it is not giving value at storage location level, it is giving quantities at storage location level and values at plant level. But requirement is: please see below example:
    All values are in USD          
    Storage location:      1001     1002
    Opening Balance:      2000     3000
    Receipts:                           1000      2000
    Issues:                            2000     3000
    Closing Balance:      1000     2000
    Please help in this regard (I want value of the stock only, not qty)
    Regads,
    Veerappa
    Edited by: Chinna Veerappa on Jul 27, 2010 5:27 PM
    Edited by: Chinna Veerappa on Jul 27, 2010 5:28 PM

    vlauation is at plant level (MBEW table) the storage location level does not carry values (table MARD).
    You may have to develope your own ZMB5B  program and calculate yourself what is not stored in SAP.

  • Date Wise and Storage Location Wise Stock Qty & Value Report......

    Hi Experts,
    We want a report Date Wise(As on 31.03.2008) and Storage Location Wise Quantity & Value Report for only Finish Materials. Is there any report ?
    From Mb5b we canot get storage location wise report as we get only plant level qty and value.
    Pl. guide us.
    Regards,
    Yusuf

    Hi Yusuf,
        Try the Tcode: MC.9 there enter the site and article and executeYou will get details of the article
    stock, value. if you double click the article you will get the details of storage location.
    Hope it will be help for you
    Regards
    GK

Maybe you are looking for