MCIZ report - Fleet management

Hi Friends,
In MCIZ, no data exists is coming for a fleet equipment after entering the fuel and distance in IFCU.
the material is posted in the document for the consumption.
But for another fleet equipment it is updating correctly in MCIZ.
Could you please guide what i am missing?
Regards,
Alagesan M

Solved.
Measurement position assigned in "Configure Measurement document update"

Similar Messages

Vehicle total consumption and cost report - Fleet Management

Dear All,
I have created a Fleet object having multiple fuels i.e. Gasoline and CNG and entered transactional data using IFCU transaction. My client need to know how much Gasoline and CNG was consumed for the Fleet Object and cost incurred for the fuel consumption. In MCIZ report it shows the total fuel consumption counter reading for the vehicle regardless of different fuel types.
Is there any standard report to view the said information?
Thanks & Regards,
Saif Ali Momin

The following method may work for you
Divide the distance by the litres used to get the km/litre
Convert the km/litre to L/100 km i.e. divide 100 by km per litre
Convert km/litre to miles per gallon i.e. multiply km/litre by 2.825
Fuel conversion formula table
To convert Formula to use
km per litre to litres per 100 km divide 100 by km per litre
km per litre to miles per gallon multiply km per litre by 2.825
litres per 100km to miles per gallon divide 282.5 by litres per 100km
miles per gallon to litres per 100km divide 282.5 by miles per gallon
litres per 100km to km per litre divide 100 by litres per 100 km
miles per gallon to km per litre multiply miles per gallon by 0.354
km to miles multiply km by .62137
miles to km multiply miles by 1.6093
gallons to litres multiply gallons by 4.546
litres to gallons multiply litres by .21997
Hope this of help
Jim

Standard Structure Not Updating (S114) Fleet Management

Hi...
We are implmenting the Fleet Management . I did the following configuration setting
1) Created view profile and assign with fleet object type.
2) Define the Consuamable type, Engine Type .
3) Setting done for unit of measurement for monitoring of consumption.
4) Dfined special measuring position for fleet objects.
5) Defined calculation method for fleet consumption methods.
6) Created gas station locatin.
7) Setting done for consumption relevent counter reading update.
After that I have created fleet as a equipment. After that I am posting the fuel in IFCU transaction. Now I am facing one problem that distance data is updating in MCIZ transaction but Fuel Volume data is not updating in the MCIZ report. In the PMIS stting, the key figure "IAMENFLVOL" reference indicator is "A" (Key Figure to be updated).
Can anybody help me to solve this problem
Thanks in advance.
Regards
Pramod

Hi,
Check this link:
[Fleet Management|http://www.nd-solutions.com/pdfs/white_EAM/EAM_ConfiguringFleetMgt.pdf]
This link has all the steps with screen shots.
Also check SAP Note: 563832.
Hopefully this will resolve your issue.
Thanks,
Amit.
Edited by: Amit Saxena on Oct 23, 2008 10:12 PM

Re: Fleet management in Plant Maintenance

Hi Guru's
Here i have an issue reg the configuration screens in PM
In SAP-SPRO---Plant maintenance and Costumer Services, I am not able to find the Screens required for configuration for FLEET MANAGEMENT i e.,
1) Set List Processing for Fleet management objects.
2) Set reference object screen for Vehicles.
3) Consumption Relevant Counter reading Update.
These are mandatory for capturing the cost of the fuel into reports of Vehicle analysis report.
Please any one can Send me whether we need go for any Patches or to update any notes.
Present i am using ECC-6 EHP-5
Please reply back ,it is very urgent.
Regards
Kumar

I hope, for the below points there is no separate configuration.
1) Set List Processing for Fleet management objects.
2) Set reference object screen for Vehicles.
For 3) Consumption Relevant Counter reading Update.
IMG => PM & CS => Information systems for PM & CS => Configure Measurement document update
I hope, this is common for all the versions. Please check.

Data quality report under management consol

I am using BO DS 4. and trying to use the data quality report under management consol. For me these reports are getting generated for every run of the address cleanse Job.
Is it possible to get a consolidated report for a day of the Job rather then for each run? If yes, please let me know how I can do that.

Please respond, If any body has any clue on this

Report & Layout Manager

Hi,
I have created User defined form. Now i have to display report when click on Preview button (Same as Standard document).
Can we use report & layout manager to display report.
Regards,
Pravin

Hello
possible with development, and it is pending from the B1 version.
Easy solutions are:
- 8.81 you can use Crystal Reports and PLD
- 2007 you can use PLD only or CR integration addon
in Crystal:
- You can create your layout and you can import into the system as report (not layout) into a specific folder
- When you press the print or print preview button (eg menu action is indicated, menu id "520", "519"), then you can find the crystal report in the OCMN table with the following query
select MenuUID from OCMN where Name = N'YOUR_REPORT_NAME'
- next step is call the report with ActivateMenuItem and fill the parameters.
Complete code for crystal
            Dim oRs As SAPbobsCOM.Recordset = oCompany.GetBusinessObject(BoObjectTypes.BoRecordset)
            Dim sQuery As String
            Dim sMenuID As String
            sQuery = "select MenuUID from OCMN where Name = N'YOUR_REPORT_NAME"
            oRs.DoQuery(sQuery)
            If oRs.Fields.Count > 0 Then
                sMenuID = oRs.Fields.Item("MenuUID").Value.ToString
                m_SBO_Application.ActivateMenuItem(sMenuID)
                Dim oForm As SAPbouiCOM.Form = SBO_Application.Forms.ActiveForm
                oForm.Items.Item("1000003").Specific.String = docentry
                m_CrystalCriteriaFormID = oForm.UniqueID
                oForm.Items.Item("1").Click(BoCellClickType.ct_Regular)
            Else : m_SBO_Application.MessageBox("NO PRINTING LAYOUT EXISTS!")
            End If
In PLD, the logic is the same, but you must activate the User Queries print layout, and locate the report in the matrix.
Regards
János

Reports Queue Manager - Status Information

Hi there,
I would like to know if you can get status information from the reports queue manager.
For your information: We are still using Forms/Reports 6i but looking forward to use 10g via web frontend.
1.) In detail I would like to control the 'number of jobs'. Our frontend (RWRQM60.EXE) only shows the first 990 (up to 1.000) entries, via 'queue => properties' I can see the total number of jobs.
Is there a way to get the number of jobs via SQL or by another programmatically way (we prefer .NET)?
2.) The reason why I need this information is because of a limit of 9999 reports in queue manager. After this amount of reports the report server raises a 'REP-0177: Error while running in remote server' and the 10.000 job will NOT be send to the queue!
Is there a way to expand the number from 9.999 jobs to more .. for example 30.000 jobs?
Thanks for your help ..
Michael

Currently no, not easily. we intend to fix this for Reports 7.0.
Regards
The Oracle Reports Team http://technet.oracle.com

Bug report: Energy Manager causes slow performance...

Very slow Windows Startup..
Energy Manager's plans and the problem occured using any plan as I remember, and it wasn't an issue with the maximum processor state. I had heavy disk usage, especially access to the Page File, which is what the person in the second link I posted also described. CPU usage was low. The disk usage was seemingly not related to Energy Manager (Chrome was usually the worst), but removing Energy Manager completely resolved the problem. If you would find it helpful. I'm quite confident that even with Maximum Processor state at %100, CPU usage was low when it was slow, and that disk access was the culprit.
previously have use 1.0.0.31 or 32 not sure.
Windows 8.1
Im using Lenovo Energy Management Driver
1.0.0.28
4.6.2014

I actually have the same problem. Sorry to work on a old thread, but...
I've got my Lenovo B50-70 less than 1 month ago, and had switched it to SSD and had set everything up and is working perfectly. However there are a bunch of lenovo programs that came pre-installed. This computer is used mainly for work and I really don't like programs that suddenly pop-up and ask you to do stuff, as it is quite distracting, and with Lenovo Energy Manager being one of them so I removed it. (I did do some research before I remove...)
Everything was fine, until when I try to switch on my wifi (I usually have it off, as I use LAN most of the time)... For the B50-70 there is a airplane button on F7, which allow the user to switch wifi and bluetooth on/off. That button was unresponsive... After some digging it is actually related to the power energy manager being removed. So I've downloaded the latest version from Lenovo and it was working again...
However though, whenever I start my computer it is taking so long to start... And I tried uninstalling the power energy manager and it solved the problem... And I am stuck with either having no wifi on/off ability or a really slow boot, which loses the whole purpose of the SSD. After you enter your username and password it originally takes around 5~10 seconds to login, now it takes over 1 minute.
I have found this other link, which says Lenovo Power Manager having the same problem.
https://forums.lenovo.com/t5/ThinkVantage-Technologies/Bug-report-Power-Manager-causes-slow-performa...
There is a solution, which you can change the registry to switch a function off. I've tried it and it didn't work, which is not surprising as it's a different program.. But I am hoping that Lenovo can provide a similar solution for Lenovo Energy Manager...

Problem in Sending email from Reports Queue Manager

Hi
I am getting problem in sending email from reports queue manager.
It says that error in logging to mail server.
If any body knows the sol then pl help me out.
thanks

Hi
I am getting problem in sending email from reports queue manager.
It says that error in logging to mail server.
If any body knows the sol then pl help me out.
thanks

System requirements of Fleet Management System

Hi,
What are the system requirements to activate the Fleet Management System? Will it also need another license?

Hi,
which Szenario are you planning to implement? In regards to licensing I would recommend to contact your SAP sales contact.
Best regards,
Claudia

SAP MM- SRV Mgmt integration with Fleet management-Config Required

Hi friends,
My client is asking us to implement SAP fleet managent integration with SAP MM service management.kindly help me by providing config details also.
Regards,
William

Hi,
Read the below sap help
http://help.sap.com/saphelp_470/helpdata/en/e3/0aeb1802e211d39eeb0000e8323350/frameset.htm
Kapil

Portlet to access the reports queue manager

Is there a pre-built portlet that comes with Oracle9i AS Portal that will let me view the report job statuses in the report queue. I want to be able to view the report queue via a web browser, rather that thru the Oracle Reports Queue Manager.

In case you are still looking for information on this -- search
through here or metalink for information on the RW_SERVER_QUEUE
table. It does a fairly decent job of mirroring what's going on
in the report queue. Completed and scheduled jobs it handles
well, but (at least in Portal 3.0.8) the report server doesn't
seem to update this table frequently for jobs currently being
run. I'm debating right now whether to write a Java servlet to
monitor the real RWCGI60 output (which always seems accurate) to
get a better handle on what's really happening on the reports
server. (btw: Anybody else tried doing this yet?)
- Bill

Report Queue Manager 9.04.2

Dev Suit = 9.0.4.2
Win XP SP2
Start a report server with <home>/bin/rwserver server=local
Open the Report Queue Manager, and queue=local.
Click job, then new, then set options.
Enter needed information, click ok then run.
RQM responds with "can not run report: Cannot connect to the report server. Network tns names ..."

Do you think it would be also a solution for me?
Ref: [REPORTS SERVER] Can't connect with Reports Queue Manager
Daniel
Message was edited by:
DanielB
Message was edited by:
DanielB

How to install the Report Queue Manager alone without the Developer suite

is it possible to install the Report Queue Manager alone without the Developer suite...
i want to install it in the clients machine... please if you have any idea...
thanks for the help...

I use a product called No Machine. http://www.nomachine.com/download.php which is a client which allows you to connect via a graphical interface remotely. Lots of people also use VNC, if you do this you may need to install the VNC server option on the HPUX box, then connect via the VNC client. You should really talk to your unix administrator how they want to do it.
If you have access to the HP machine do you know if it is started in graphical mode? If so you should be fine. It will require this mode.
Also as the root user us will need to execute the command
xhost +this allows user to remote connect to the UNIX box in graphical mode.
When this starts up you can start a terminal session.
you will need to set the display for the user that will start the install.
DISPLAY=:0.0make sure that the command
echo $DISPLAYreturns
*:0.0*everything should go from there.
Failing this you can do the silent install, refer to the installation guide for the options there.
cheers
James

Report Queue Manager aministrator password

Hi there!
I have install DS 10g in my local pc- i have some jobs in queue which i want to remove from the queue
but i don't know what is my administrator username and its passwords
for Report Queue Manager.
Please someone guide where to look for my adminstrator username and its passwords or how can i set it ?
Since installation i have never logged in Report Queue Manager AS aministrator
so what could be as a default administrator username and its passwords. ?
Thanking you,

Hello,
The username/password is stored in the reports server configuration file :
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_conf.htm#i1007074
You can change this username/password as it is described in the doc ...
Regads

MCIZ report - Fleet management

Similar Messages

Maybe you are looking for