MCLH giving no output, Problem in Populating tables S091, S090

In out client system,
When we are trying to Run MCLH, it is not giving any output.
1. The tables S090, S091 are empty.
2. when we run the LIS( logistic information system )over all check, it came up with the following errors.
-Errors in field catalog
-Error in update rule
3. When trying to populate the tables S090, S091 through transactions LCO1 & LCO2 ( New setup for info structures S090, S091 ) its not happening.
Can any one suggest how to resolve this issue.
Thanks in advance,
Mallika Maktala.

Hi Mallika ,
this is the problem with the Updating rule which u are defined . So better to cross check in SPRO tcode.
Regards
Prabhu

Similar Messages

Problem while populating table dynamically

Hi,
I am facing a strange problem when I execute a search component (custom developed component).
Problem summary:
I am getting first 5 empty rows (default visible row count, when I set the table's visible row count to "n" then the data in the first "n" rows are not visible) from the SAP R/3 when we fetch the data using this component. The data is available for the next consecutive rows starting 6th {(n+1)th} row. Here I am facing another strange behavior, I moved the table row position using the table paginator and viewing the data in the next consecutive rows and reset the view (invalidating the context and setting the visibility of the table to NONE), when I invoke the search again the data is missing in the 6-10 rows(the table data is paginated to the 6-10 records automatically), now the data is visible in the first 5 rows.
The details of softwares:
SAP WebAS 6.40 SP9
SAP NetWeaver Developer Studio Version: 2.0.9
JDK version - j2sdk1.4.2_06
Note:
1. The table creation and data population are done dynamically.
2. The same code works fine for SAP WebAS 6.40 SP8
3. When I tried fetching some data from SAP R/3 and displaying it in a table (table is created during design time and data population is achieved through standard context binding), it works fine.
If any of you get any clue in solving this issue, please do let me know.
Thanks in advance.
Thanks & Regards,
Santhosh.C

Hi Thomas,
I am running the application from the NDS and the URL look like the below URL
http://<<machine_name>>:50000/webdynpro/dispatcher/sap.com/parentgenericsearchhelpcomponent/PerentSearchDemo?SAPtestId=1
I am using IE6.0 SP2
Yes the application is working fine in SP8 and giving problem in SP9.
I have a parent component which calls another component(childcomponent), which has this dynamically populated table. I am using window.open() to open the window in the child component.
To answer your last question,
I don't see full of empty rows, I see empty rows for the first visble row counts(5 or 10, if the total fetched row count might atleast 1 more than the visble row count). The data is available from the first visible row count+1. If I come back and see the first vible row count, still the rows are blank.
Thanks & Regards,
Santhosh.C

Problem in populating lookup values based on the lookup query from database

HI all
I have problem of population look-up values based on look-up query
I am giving the details what i am trying
I need to populate the values from the UD_LDAP_USR table into the field of UD_USRGRPC_NisNetTriple of type lookup
i planned to set the properties of lookup as like this
look up query as select UD_LDAP_USR_COMMON_NAME as NisNetTriple from UD_LDAP_USR
ColumnNames as UD_LDAP_USR_COMMON_NAME
Column captions as UD_LDAP_USR_COMMON_NAME
Column width as 30
Lookup Column Name as UD_LDAP_USR_COMMON_NAME
But when i try to add ColumnName as wht i mentioned above i m getting invalid property exception,update failed
I am not sure about that are we able to use other Connector table prefix with UD into the another processFrom
Let me give update on this issue
Urgent,struck my work here
thanks
Nagaraj

Thanks for the reply raghav
I tried but it was not working
I gave like what u specified but no use
It is throwing exception like set look-up query for the field
Any one help me out on this issue
Edited by: Nagaraju Chowdary on Jan 21, 2013 3:41 AM
Edited by: Nagaraju Chowdary on Jan 21, 2013 3:42 AM

Problem in Assigning table to access sequence

Dear All,
i am facing problem in assigning table to access sequence for billing output type.
I have created 1 table B902 with the combination of Sales org,plant ,Division,Billing doc type.
but if i am going to assign with access sequence system is taking for Billing type & division & for other its showing red marks & errorr.Access sequence->Aceessess->Field.if i am clicking on field in I/O column for plant its displaying negative.
bcause of this i am not able to make condtion record.
Message is Select a document field for WERKS
Regards
ajit
Edited by: SAP SD AJIT on Mar 1, 2010 3:18 PM

Hi SAP SD AJIT ,
Go to IMG --> Sales and Distribution --> Basic Functions --> Output control --> Output Determination --> Output Determination using condition technique --> Mantain output Determination for billing document --> Mantain condition table, in the pop-up choose the option "Field catalog: Messages for billing documents", there you can add standard field into the catalog, so you can add WERKS and the other one "document structure" I don't know what field it is, but if it is and standard field you can add it. If you have a Z field you need ABAP help to add the Z field to the structure "KOMKBZ5" and then you can add it to the catalog.
Regards,
Mariano.

Alternative UI Output formats for BAPI table

Hi Experts,
Can I display the output of a BAPI table in any other format apart from a table.
Regards
Abdullah

Abdullah,
In web dynpro you cannot have tables with scrollbar. A workaround for that may be a use of ScrollContainer UI element with fixed height and display all table rows via setting visibleRowsCount=-1.but problem here is , table headers will be scrolled as well. So it is better not to have them like that.
I would suggest take use of existing table UI element and dont alter its functionality.
Regarding incorporating the application using web dynpro I guess that you must be knowing(not sure but think that you need to get rid of COM DCOM).
hope it helps
regards,

Problem with the table control BDC in FV60 transaction

Hi All,
I got the problem with the table control in FV60 transaction.
This is working for 900 line items.After 900 line items it is giving the problem like it is 1000th line item.You can post only 999 line items.
I know we can post only 999 line items,but in my file only 920 line items.
Please give me solution,if anybody come across this situation.
Thanks & regards,
rakesh.

Hello Rakesh ,
your file may have only 920 line items , but based on those line items, SAP may create few more new lines ( based on the clearing recon accounts , inter company transaction ...etc )...
regards
Prabhu

Problem when writing table:c_t_variables

Hi Everyone,
I have a typical workbook issue and the following were the issue points:
1. A user have saved his workbook in the shared drive and trying to give access to all the users who have access to this drive. For this there is a option in Excel->tools(Menu)>Share workbook and check the Check box.
2.Now when he accessing the workbook via Business Explorer. The moment he refreshing one the query in the workbook it giving a pop Error message.
Business Explorer<internal Error> Problem when writing table: C_T_VARIABLES.
It's wierd issue for me and haven't come across this error before.
Please look into this issue and let me asap if there is any solution for this.
Thanks,
It's very Urgent

Hello,
where I can find
Excel Options >> Complements >> Manage Excel Complements >> Go >> Deactivate Euro Tools.
thanks

How to get row index in dynamically populated table?

Hi,
I am following example given in http://balusc.xs4all.nl/srv/dev-jep-dat.html to Dynamically populate datatable. How can I get row index while populating table in populateDynamicDataTable() method
private List myList;
private String[] headers; // Optional.
private HtmlDataTable dynamicDataTable;
// Actions ----------------------------------------------------------
public void loadMyList() {
// Set headers (optional).
headers = new String[] {"header1", "header2", "header3"};
// Set rows. This is a stub example, just do your dynamic thing.
String[] row1 = {"ID1", "Name1", "Value1"};
String[] row2 = {"ID2", "Name2", "Value2"};
String[] row3 = {"ID3", "Name3", "Value3"};
// Convert rows to List and set the List.
myList = new ArrayList();
myList.add(Arrays.asList(row1));
myList.add(Arrays.asList(row2));
myList.add(Arrays.asList(row3));
public void populateDynamicDataTable() {
//*********************** I want current row in this method *************//
// Any columns?
if (myList != null && myList.size() > 0) {
dynamicDataTable = new HtmlDataTable();
// Get amount of columns.
int columns = ((List) myList.get(0)).size();
// Set columns.
for (int i = 0; i < columns; i++) {
// Set header (optional).
UIOutput header = new UIOutput();
header.setValue(headers);
// Set output.
UIOutput output = new UIOutput();
ValueBinding myItem =
FacesContext
.getCurrentInstance()
.getApplication()
.createValueBinding("#{myItem[" + i + "]}");
output.setValueBinding("value", myItem);
// Set column.
UIColumn column = new UIColumn();
column.setHeader(header);
column.getChildren().add(output);
// Add column.
dynamicDataTable.getChildren().add(column);
// Getters ----------------------------------------------------------
public List getMyList() {
return myList;
public HtmlDataTable getDynamicDataTable() {
if (dynamicDataTable == null) {
loadMyList(); // Reload to get most recent data.
populateDynamicDataTable();
return dynamicDataTable;
// Setters ----------------------------------------------------------
public void setMyList(List myList) {
this.myList = myList;
public void setDynamicDataTable(HtmlDataTable dynamicDataTable) {
this.dynamicDataTable = dynamicDataTable;
I have tried dynamicDataTable.getRowIndex, but it returns -1
Is there any other way?
Thanks ,
Chitra.

When you dynamically populate a datatable, you're populating the columns, not the actual rows.
Just add EL to the styleClass attribute, like:styleClass="#{myBean.myTable.rowIndex == 1 ? 'highlightedClass' : 'defaultClass'}"where 'myTable' refers to a HtmlDataTable property in the backing bean.

Print Output problem in ECC6

Hi Friends,
I am getting print output problem in ECC6.
In VF03 I am giving issue output for invoice printing. Whenever I am presseing issue output one screen is coming for selecting output type. I have selected one output type and I pressed print preview then in print preview one item and corresponding amounts it is showing properly for the first time. But the problem is after the print preview if I come back and again if i press print preview button values are not getting refreshed and same item is repeated for twice and the amounts are also getting added. Again for the third time if i come back and again if i press print preview one more item is getting repeated and the amounts are also getting added which should not suppose to happen.
What could be the problem and how to resolve it?
Rewarded,
Steve

Hi,
clear those variables in the program .
Regards,
Bharat.
Reward points if helpful

Macbook mini DVI to DVI output problems

hi
I've been using a samsung syncmaster 22" with my macbook for about a year now with no problems using the mini DVI to DVI connection
then earlier this week i used a different DVI cable to plug my playstation 3 into the screen, when i plugged the computer DVI cable back into the screen lots of red/pink pixels have taken over the screen and when the desk is nudged red lines flash up
i thought it might be either the DVI cable or the mini DVI to DVI adapter and replaced both to no avail, i have also tested all the cables on other screens/with other computers, and tested the screen with my playstation. Screen and cables all work fine so i think it must be some kind of output problem, but cant work out what it could be seeing as nothing would have happened to the port on the actual computer whilst changing connections on the samsung screen
sorry for the long winded post, really wanna know what the problem is here

Hi cbeth,
welcome to macbook forum.
For your friend macbook, try to press F7 back and forth to switch between mirror and expanded mode.
Try to update your macbook hardware firmware and software using software updater and repair permission after that...application/utilities/disk utility/repair permission.
Also reset your PRAM and PMU.
Open your friend system preference / display and try to compare and set yours similar to hers, including resolution, color depth, refresh rate.
Good Luck.

Problem in creation table for sap 4.6

hello evrybody
i have just a problem in creating table with se11;after saving and activite those table and zhen i select icon of contents it bloocks and shoz this error message :
Error reading table TMCNV; RC = 4
Message no. BMG 135
thank you for your help
Edited by: Rob Burbank on Apr 6, 2010 10:20 AM

Seems like you have a material number field (domain with conversion routine MATN1 or alike) and table TMCNV does not have the entry with key 'MATCONV', check the where used-list of message BMG 135. I assume this entry comes delivered by SAP, so try to restore it.
Also search for OSS notes with "TMCNV" or "BMG 135".
Thomas

Problems with a table in PDF`S footer

Dear sirs,
We are having problems when trying to run a PDF with Adobe LiveCycle Designer tool.
We are working with a PDF which is composed of a header, the main body and a footer. We have created a table (table1) at the footer and
another one at the main body (table2). This last table (table2) may overflow therefore it will genarate two pages for our PDF.
On both pages appear the header and the footer correctly but in the last page it does not write the data from the table included in the footer (table1).
We have no problems with the table included in the main body
In the attachments, I send you the screenshots of both pages in which I have marked in red the part where we have error.
May you help us to solve our problem?
Thanks in advance your help.
Edited by: emgaitan on Mar 16, 2010 2:18 PM

Wardell,
Check the data in RSA3 for the extractor that you use to bring data .
You must be using the data source 0CO_OM_CCA_09. Check the data and reconcile and you will get it.
Let me know if you need anything else.
Thanks
Ravi Thothadri
[email protected]

Mac mini audio output problems

This is similar to a problem that appeared before, but with a different twist.
On 4 July all was well. On 5 July I switched on and there was no "chord" from the Mac. When I collected my mail - no sound from my speakers (which are part of my screen). Logged on to a couple of sites - no sound.
The System Profiler, under the "Audio (Built In)" category, says: "No Built-in Audio." I know that's wrong because it's always worked before and when I plug my headset in it works fine.
When I go to the Sound preferences panel in System Preferences, it finds the headset but if I unplug that it finds nothing.
I tried running the hardware test (by putting in the OS X install disc and holding D during startup.) It couldn't find a problem.
So, as far as I can see, audio output is fine for the USB headset output but not for the others. Is there a simple fix? The nearest Apple store is about 200 miles away and I don't fancy the idea of posting the Mac off.
(And I think it's still under warranty for a couple more weeks.)
Mac mini Mac OS X (10.4.10)

hello mini users with the "no audio output" problem
it seems that there are faulty output jacks in the macbook and the mac mini
there are two things you can try:
i tried everything and began thinking about what new software i had installed. it was "macam" which enables you to use older webcams on OSX. i needed that to use my webcam on skype.
macam installs a file called "macam.component"
if you have the same, do this - take that file out of:
(your hard drive)/library/quicktime - macam.component
and just put it on your desktop
restart, then in your sound pref's choose your audio output (if doesn't work restart again)
the first time i took it out, i had my sound back instantly, another time i had to choose audio output in sound prefs. you kind of have to try different things. after you get your sound back, you can put back "macam.component" to use your webcam.
it seems macam causes the problem, the two can not work at the same time.
the second thing: if you dont have "maccam" try plugging and unplugging output jack a few times and restarting until you have sound.
the problem still could be with the OSX 10.4.10 update / quicktime...or maybe even a hardware problem like others with macbooks were saying (with the red light), not sure.
people with macbooks and who have the red light on, say to use a paperclip to turn off the switch inside.
my mini does not have a red light on. i tried using a paperclip but it doesnt work.
hope this helps, beleive me i feel your pain!!!!
what good is a computer without sound?
extremely annoying problem that i hope apple looks into and fixes
-andrew

Scheduling Report output to a Database Table

Hi,
Scenario:
I have a RPT - loaded on the BO server (BO XI R2) - (which uses a stored procedure and a formula to populate the report) which generates the data in a tabular format.
Requirement:
I would like to insert the resultant rows generated in the report to a database.
Is there a possibility to schedule a report output to a database table?

It seems that what you want to do is some kind of ETL, you should consider a right tool for doing this. For example, BusinessObjects Data Integrator. By BODI, you can directly transform the source data to what you need to the destination.
If you still need the report for presentation, rather than purely using it as a transformation tool, I suggest you do this. Implement a Java program (.NET is also possible) to implement the Program interface, so that you Java program can be added to BusinessObjects Enterprise as a program object. In this Java program, what you do is: first, schedule the report, and then open the report, read the row sets and insert them to the destination table. This process involves the Business Objects Enterprise SDK and the Report Application Server SDK.
Finally, you can in turn schedule this program objects, so that it will periodically run the report and output to the destination table.

Problem in joining tables

Hi All,
Here I am facing the problem in Joining table I have S031,s032,makt,marc,I need a field ATWRT field from CAWN table,I did't find any link for this above from tables, any one please help me how to find out.
REPORT ZMMTEST.
tables:s031,s032,makt,marc.
DATA : BEGIN OF itab1 OCCURS 0,
       matnr TYPE s031-matnr,
       lgort      TYPE s031-lgort,
       werks      TYPE s031-werks,
       spmon      TYPE s031-spmon,
       magbb      type S031-magbb,
       wagbb      type S031-wagbb,
       azubb      type S031-azubb,
       aagbb      type S031-aagbb,
       END OF itab1.
DATA : BEGIN OF itab2 OCCURS 0,
       matnr like makt-matnr,
       maktx like makt-maktx,
       END OF itab2.
DATA : BEGIN OF itab3 OCCURS 0,
       matnr TYPE marc-matnr,
       werks type marc-werks,
       ekgrp type marc-ekgrp,
       END OF itab3.
DATA : BEGIN OF itab4 OCCURS 0 ,
       matnr   TYPE s032-matnr,
       lgort   TYPE s032-lgort,
       werks   TYPE s032-werks,
       mbwbest type s032-mbwbest,
       wbwbest type s032-wbwbest,
       END OF itab4.
data : begin of itab5 occurs 0,
      objek   type ausp-objek,
       atwrt   type cawn-atwrt,
       end of itab5.
DATA : BEGIN OF itab_final1 OCCURS 0,
       matnr      TYPE s031-matnr,
       lgort      TYPE s031-lgort,
       werks      TYPE s031-werks,
       spmon      TYPE s031-spmon,
       magbb      type S031-magbb,
       wagbb      type S031-wagbb,
       azubb      type S031-azubb,
       aagbb      type S031-aagbb,
       maktx      TYPE makt-maktx,
       ekgrp      type marc-ekgrp,
       mbwbest    type s032-mbwbest,
       wbwbest    type s032-wbwbest,
       END OF itab_final1.
DATA : BEGIN OF itab_final OCCURS 0,
       matnr      TYPE s031-matnr,
       lgort      TYPE s031-lgort,
       werks      TYPE s031-werks,
       spmon      TYPE s031-spmon,
       magbb      type S031-magbb,
       wagbb      type S031-wagbb,
       azubb      type S031-azubb,
       aagbb      type S031-aagbb,
       maktx      TYPE makt-maktx,
       ekgrp      type marc-ekgrp,
       mbwbest    type s032-mbwbest,
       wbwbest    type s032-wbwbest,
       atwrt      type cawn-atwrt,
       END OF itab_final.
select-options:s_matnr for s031-matnr.
start-of-selection.
select matnr lgort werks spmon magbb wagbb azubb aagbb
        from s031 into table itab1
        where matnr in s_matnr.
if not itab1[] is initial.
    select matnr maktx from makt into table itab2 for all entries in itab1 where matnr = itab1-matnr.
if not itab2[] is initial.
   select matnr werks ekgrp from marc into table itab3 for all entries in itab2 where matnr = itab2-matnr.
if not itab3[] is initial.
   select matnr werks mbwbest wbwbest from s032 into corresponding fields of table itab4 for all entries in itab3 where matnr = itab3-matnr.
*if not itab4[] is initial.
   select atwrt from cawn into corresponding fields of table itab5.*
     endif.
   endif.
endif.
endif.
end-of-selection.
loop at itab3.
   itab_final-matnr = itab3-matnr.
   read table itab2 with key matnr = itab3-matnr.
   if sy-subrc = 0.
    itab_final-maktx = itab2-maktx.
   read table itab1 with key matnr = itab2-matnr.
   if sy-subrc = 0.
    itab_final-lgort = itab1-lgort.
    itab_final-werks = itab1-werks.
    itab_final-spmon = itab1-spmon.
    itab_final-magbb = itab1-magbb.
    itab_final-wagbb = itab1-wagbb.
    itab_final-azubb = itab1-azubb.
    itab_final-aagbb = itab1-aagbb.
endif.
   endif.
   itab_final-ekgrp = itab3-ekgrp.
read table itab4 with key matnr = itab3-matnr.
if sy-subrc = 0.
itab_final-mbwbest = itab4-mbwbest.
endif.
itab_final-wbwbest = itab4-wbwbest.
append itab_final.
clear itab_final.
endloop.
WRITE: /2 'material', 23 'storagelocation',29 'plant',35 'date',44 'val.stock.issue',66 'val.stock.issue.value',86 'no.of.stock.receipts',97 'no.of.stock.issues',150 'material.des', 160 'pur.group',190 'stock.val',210 'stock.quan'.
ULINE.
loop at itab_final.
WRITE: /2 itab_final-matnr, 23 itab_final-lgort,29 itab_final-werks,35 itab_final-spmon,44 itab_final-magbb,66 itab_final-wagbb,86 itab_final-azubb,97 itab_final-aagbb,
           150 itab_final-maktx, 160 itab_final-ekgrp,190 itab_final-wbwbest,210 itab_final-mbwbest,itab_final-atwrt.
ENDLOOP.
Thanks&regds,
Sree.

Hi sree,
take join between s031-sptag ,ausp-datuvthen fetch records based on this condition.(itab1)
After retrieve records based on join condition between
ausp-atinn,ausp-adzhl and cawn-atinn,cawn-adzhl.(itab2)
Retrieve records using for all entries bet first join condition and second join condition.
use for all entries between itab1 and itab2.
it will work surely.
reaward points

MCLH giving no output, Problem in Populating tables S091, S090

Similar Messages

Maybe you are looking for